Professional Documents
Culture Documents
c) Assignment is compulsory only for the subjects Student appearing for Exam.
If students still have any doubt they may email their queries to Controller of
Examinations, IIIE.
Sd/-
Controller of Examinations
The Internal Assignment for Preliminary, Section-A & Section-B will be required to be
submitted by those students appearing for November 2022 exam. All eligible students are
hereby directed to submit the completed Internal Assignment for the subjects they are
appearing for November 2022 exam on or before 25th September 2022
1. Please write carefully your Name, Student membership number, Subject name on
each Subject Assignment. Please stick a label (Membership Number and Subject
Name) on the note book cover page.
3. The fees for Internal Assignment will be Rs.200/- per subject. This is to be paid
through Demand or Online only (Cheque payment will not be accepted) D/D drawn in
favour of Indian Institution of Industrial Engineering, payable at Mumbai and sent
along with Assignment. Write your name and membership number on the back side of
the Demand Draft, Online payment details transaction should be attached with
assignment. Bank details is given below.
4. Solve the questions as per instructions (do not leave any questions or sub questions).
Detailed answers are expected. Keep sufficient gap between answers of different
questions.
5. The paper should be written neat and clean. Leave left margin, top margin and bottom
margin. Write up should be legible. Solve all questions sequence wise (from 1 to 8 in
ascending order).
6. The expected length of answer shall depend upon the nature of the question.
7. Answers shall include the definition, Diagrams, Tables, examples, etc. depending on the
nature of question. Do not waste your time in decorating assignments.
8. IE005: Engineering Drawing & Computer Graphics assignment, student may use drawing
sheet.
9. Content that has been directly copied from the Internet will NOT be accepted.
10. Assignments that have been copied and shared among student(s) will be automatically
rejected and such students are liable for disqualification.
11. Ensure that your answers are according to the marks allocated. Students are advised to
check their Assignments thoroughly before submitting the same.
12. Late submissions up to 30th September 2022 will be accepted with Rs. 200/- per
subject as late fees.
13. Beyond 30th September 2022 Internal Assignment will not be accepted.
14. Keep Xerox Copy of all documents (assignment and DD) with you for your reference and
safety.
15. Following Front Cover Compulsory should be attached with each Internal Assignment
Note Book.
Sd/-
Controller of Examinations,
Mention Membership Number on Transaction Receipt & attached with the Assignment, if
transaction receipt is not found with the Assignment, then the Assignment exam application will
be rejected.
Mandatory Format for who have done online payment for
Internal Assignments November 2022 Examination.
Q.1
Subject Code & Name: ____________
Q.2
________________________________
Q.3
Exam Centre : ___________________
Q.4
Assignment Fee (Rs.) : ____________
Q.5
Q.8
Date : __________
Total
Signature of Student:
Signature of Examiner
Note : 1. Solve all questions by sequence. Question Numbers are to be written clearly in Bold
Font, in center of the line, also in the left-hand margin.
2. Keep copy of this page and assignment for your record.
3. Student must pass individually in assignment and written papers.
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
IEA 01: PROBABILITY AND STATISTICAL METHODS
. Max. Marks: 140
Instruction: All questions are compulsory.
------------------------------------------------------------------------------------------------------------------------------
Q1. a) What is ANOVA? Explain with the help of a suitable example. (10)
b) Two batches of 12 animals each are given test of inoculation. One batch was
inoculated and the other was not. The number of dead and surviving (10)
animals are (given in the following table for both cases. Can the inoculation
be regarded as (effective against the disease at 5% level of significance?
Q2. a) A random sample of 700 oranges was taken from a large consignment and (10)
100 found to be defective. Construct the 95% confidence limits for the %
number of oranges in the consignment.
b) A stud manufacturer wants to determine the inner diameter of a certain (10)
grade of tire. Ideally, the diameter would be 15mm.The data are as follows:
15, 16, 15, 14, 13, 15, 16, 14
(i) Find the sample mean and median.
(ii) Find the sample variance, standard deviation and range
(iii) Using the calculated statistics in parts (i) and (ii) Comment on
the quality of stud.
Q3. a) A lot containing 7 components is sampled by a quality inspector, the lot (08)
contains 4 good components and 3 defective components. A sample of 3 is
taken by the Inspector. Find the expected value of the number of good
components in this sample.
b) Ten school boys were given a test in Statistics and their scores were (12)
recorded. They were given a month special coaching and a second test was
given to them in the batne subject at the end of the coaching period. Test if
the marks given below give evidence to the fact that the students are
benefited by coaching.
Marks in
Test I 70 68 56 75 80 90 68 75 56 58
Marks in
Test II 68 70 52 73 75 78 80 92 54 55
Q4. a) In a certain factory turning out blades, there is a small chance 1/500 for any
blade to be defective. The blades are supplied in packets of 10. Use the
(10)
Poisson distribution to calculate the approximate number of packets
containing no defective, one defective, two defective blades in a
consignment of 10000 packets. (Given e-0.02 = 0.9802).
b) In a certain assembly plant, three machines, B1 B2 and B3 is a make
30%,45% and 25%, respectively of the products. It is known from past
experience that 2%, 3% and 2% of products made by each machine
respectively are defective. Now, suppose that a finished product is
randomly selected. What is the probability that it was made by machine B3.
Q5. a) Find the equation of the least square line from the following data and
(12)
estimate the production in 1982.
b) The diameters of can tops produced by a machine are normally distributed (08)
with standard deviation of 0.01 cms. At what mean diameter the machine be
set so that not more than 5% of the can tops produced by the machine have
diameters exceeding 3 cms.
(10)
Q6. a) The incomes of a group of 10,000 persons were found to be normally
distributed with mean Rs.520 and standard deviation Rs.60. Find (i) the
number of persons having incomes between Rs.400 and 550, (ii) the lowest
income of the richest 500.
b) Present an overview of SPSS package along with its features, (10)
applications, advantages and limitations.
————— × —————
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
IEA 02: OPERATION RESEARCH
.
Max. Marks: 140
Instruction: All questions are compulsory.
------------------------------------------------------------------------------------------------------------------------------
Q1. Explain with the help of flow chart, the simplex Algorithm. (20)
Q2. A security dealer recommends two types of investments A and B to his client Investment (20)
A returns 6% and B 8%. The client has almost Rs 100000 to invest. The client wants the
total annual returns to be at least Rs 7000 and at least 275th of the amount to be
invested in investment B. The security dealer gets 5% of the income from investment A
and 4% of the income from investment B. Construct the mathematical for the problem to
maximize the total fee of the security dealer.
(20)
Q3. Find the optimum solution to the following transportation problem in which the cells
contain the transportation cost in Rs.
Available
W1 W2 W4 W3 W5
F1 7 6 4 5 9 40
F2 8 5 6 7 8 30
F3 6 8 9 6 5 20
F4 5 7 7 8 6 10
Required 30 30 15 20 5
———— × ————
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
IEA 03: FINANCIAL ACCOUNTING & COSTING
(20)
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November -2022
Section-A
IEA 04: PRINCIPLES AND PRACTICES OF MANAGEMENT
.Max. Marks: 140
Instruction: All questions are compulsory.
------------------------------------------------------------------------------------------------------------------------------
(20)
Q1. What are the principles and functions of Scientific Management?
Q3. Explain the various types of organization Structures? What are their merits and (20)
limitations?
Q5. a) Why do some of the projects fail? Give various reasons? (10)
b) Define Project Management? What are the functions of Project Manager?
(10)
Q6. Define Organization Culture? What are the characteristics of a healthy organization
(20)
culture? How does it contribute to the performance of the employees?
———— × ————
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
Q2. a) What are different steps in Method study? Explain in detail. (10)
b) With the help of a suitable example explain "Fitting the Job to the Worker-
(10)
Ergonomics perspective".
Q3. a) Define Productivity. What is correlation between productivity and Standard of (10)
living?
b) How incentive schemes do benefit the company? Explain with a suitable example. (10)
Q4. a) Average time values of five of fifteen manual elements recorded in the time study (10)
analyst's recent study are 0.15, 0.22, 0.23, 0.18 and 0.10 minutes respectively.
The predetermined motion time values for the same elements are 0.13, 0.20, 0.19,
0.20 and 0.10 minutes respectively. Calculate average performance rating.
b) Explain Work measurement with suitable example
Q5. a) Explain objectives and principals of Plant layout. Explain in brief types of layout. (10)
b) Elaborate with suitable example" rules for breaking the task into elements" with
(10)
reference to Preparing for Time Study.
(10)
Q6. a) Define Ergonomics. Explain Ergonomics of work environment with respect to (10)
Ventilation factors. Explain in brief Ergonomics of posture.
b) Write in brief about Normal distribution curve and its significance in work sampling.(10)
Q7. Write short note on following:
a) Symbols of Method study (20)
b) Micro motion study
c) Therbligs
d) Theory of learning curve
———— × ————
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
IEA 06: MANUFACTURING TECHNOLOGY
Max. Marks: 140
Instruction: All questions are compulsory.
------------------------------------------------------------------------------------------------------------------------------
Q.1. a) What is Pattern? Which materials can be used for making?
(10)
Patterns? (4 marks)
Explain with neat sketches any two types of Patterns (4 marks)
Explain the term Shrinkage Allowance (2 marks)
b) Explain Gating System with help of a sketch (5 marks) (10)
Explain common types of defects found in castings, their causes and remedies
(5 marks)
Q3. a) Differentiate between Hot & Cold Working process. What are their advantages and (10)
disadvantages? Illustrate with examples.
b) List down the typical Forging defects and your understanding about it (5)
c) Write a short note on Extrusion Process (5)
————— × —————
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
IEA 07: SYSTEMS APPROACH
.Max. Marks: 140
Instruction: All questions are compulsory.
------------------------------------------------------------------------------------------------------------------------------
(20)
Q 1. What is open loop and closed loop system explains with example?
Q 2. Explain the concept of subsystem coupling and decoupling using just-in -time and
(20)
conventional stores/stock control system as examples.
Q 3. Explain the socio technical system approach with suitable examples. Also state its (20)
merits and demerits.
Q 5. What is soft and hard system approach in the context of advanced manufacturing (20)
organization? Explain?
———— × ————
INDIAN INSTITUTION OF INDUSTRIAL ENGINEERING
GRADUATESHIP EXAMINATION
Internal Assignment for November-2022
Section-A
IEA 08: ECONOMICS & INDIAN ECONOMIC ENVIRONMENT
Max. Marks: 140
Instruction: All questions are compulsory.
------------------------------------------------------------------------------------------------------------------------------
(10)
Q1. a) Explain law of demand? Give non-price determinants of demand.
b) Explain law of diminishing marginal utility with suitable example. (10)
Q5. a) Define Unemployment and Employment and explain how it affect economy of
(10)
nation.
b) What do you mean by economic development and what are its indicators. (10)
———— × ————