Professional Documents
Culture Documents
10
MODEL 171.4
P88.40-2405-09
Adjust
Danger! Risk of injury caused by fingers being Keep body parts and limbs well clear of AS00.00-Z-0011-01A
pinched or crushed when removing, moving parts.
installing or aligning hoods, doors, trunk lids,
liftgates or sliding roof
1 Open engine hood (1) AR88.40-P-1000V
Adjustment in transverse direction
2 Loosen bolts (5) on both engine hood hinges Gap, engine hood to fender *BE60.00-P-1001-01L
(6) and align engine hood (1) in lateral
direction
*129589032100
3 Screw bolts (5) tight *BA88.40-P-1008-01A
Adjust in longitudinal direction
4 Loosen bolts (7) on both engine hood hinges Observe transitions between headlamp
(6) and align engine hood (1) in longitudinal and engine hood (1) and between front
direction. bumper and engine hood (1) (arrows).
5 Tighten bolts (7) *BA88.40-P-1007-01A
Adjust height
6 Lay engine hood down on stop buffers (8)
7 Check transitions between engine hood (1) Gap between engine hood and headlamp *BE60.00-P-1001-01L
and front fenders as well as gaps between
engine hood (1) and headlamps. If required,
loosen counternuts (9) and adjust height of
engine hood (1).
*129589032100
8 Open engine hood (1) AR88.40-P-1000V
9.1 Loosen nut (12), adjustment nut (11) and Only if necessary.
adjust height of striker eye (10)
The locked engine hood (1) should not
have any play in the area of the engine
hood lock upper elements (2)
10 Check whether engine hood locks (13) and The engine hood locks (13) should arrest
retaining hook (4) function properly. by themselves when the engine hood (1) is
allowed to drop from a height of 100 to 130
mm (measured across front end).
Engine hood
129 589 03 21 00
Feeler gauge