Professional Documents
Culture Documents
IPT 114
Tool Steel (Cr-Mo-V)
This reference material was certified by the consensus of a network of expert laboratories using different methodologies, and can be
used for calibration, assessment of precision and trueness and, to demonstrate traceability of results in chemical analysis by classical
and instrumental methods.
This material is a DIN WNr 1.2344 Tool Steel, presented in the form of chips, with nominal particle sizes between 0,60 mm and 1,00
mm (sieves 30 mesh and 18 mesh).
Certified Expanded
Properties Values Uncertainties Unit
Cr 5,20 0,06 %
Mo 1,29 0,03
Si 1,02 0,03
V 0,89 0,02
C 0,388 0,005
Mn 0,361 0,007
W 0,174 0,002
Ni 0,165 0,003
Cu 0,064 0,002
P 0,021 0,003
Co 0,018 0,002
S 0,0023 0,0003
Al (soluble) 0,028 0,003 %
Informative Expanded
Properties Values Uncertainties Unit
Sn 0,005 %
Ti 0,002
Additional Information
The raw material for the preparation of this reference material was provided by Aços Villares S.A. (Anhanguera Plant).The preparation
of this reference material and its certification were coordinated by Tsai Soi Mui Lee.
Collaborating Laboratories
ÇOS VILLARES S.A. (Usina Anhangüera) – Mogi das Cruzes, SP
A
Irineu Alabarce de Paiva, Mauro Antonio Cangnioni.
The latest version of the Certificates of IPT Reference Materials are available for download at: www.ipt.br / nmr.htm
IPT - Av Prof Almeida Prado 532 - CEP 05508-901 - São Paulo - SP - Brazil
Mod.060811