Professional Documents
Culture Documents
0 Help Reference
Fitting Selection Screen
Home
General Information
Notes & Considerations
Screen Description
See Also
General Information
The Fitting Selection screen can be used to determine the Size/Type Code for a fitting to be used in the associated
calculation. To select a Size/Type Code, select the ? command button on the associated calculation screen. The
Fittings Selection screen will appear. If the Size/Type Code is known, use the Full List tab to select the desired code.
If the Size/Type Code is not known, use the Type/Size tab to generate the associated code for the selected fitting.
Select the Apply command button to save and apply the changes, or select the Cancel command button to exit the
selection screen without saving changes.
Bradley B. Bean, PE
Revision - 001, Copyright 2014, All Rights Reserved.
Page 1 of 5
GASCalc™ 5.0 Help Reference
Fitting Selection Screen
Home
Screen Description
Type/Size Tab
The Type/Size Tab is used to generate the Size/Type Code for an associated fitting. Select the fitting type, then the
nominal size for the associated fitting. The matching codes will be displayed in the Size/Type Code list. Select the
appropriate Size/Type Code from the list.
Data Items
Fitting Type - A drop-down list box used to select the fitting type to be used in this calculation. Select the desired
type from the list.
Nominal Size - A drop-down list box used to select the nominal size for the fitting to be used in this calculation.
Select the desired value from the list.
Size/Type Code - A drop-down list box used to select the size/type code for the selected fitting to be used in this
calculation. Select the desired code from the list.
Bradley B. Bean, PE
Revision - 001, Copyright 2014, All Rights Reserved.
Page 2 of 5
GASCalc™ 5.0 Help Reference
Fitting Selection Screen
Home
The Full List Tab is a complete list of the available Size/Type Codes in the current Fitting Property table. This list
can be used to view all available codes, or to select the desired code.
Data Items
Full List - A display panel used to list all the available Size/Type Codes in the current Fitting Property table. Select
the desired code from the list.
Command Buttons
Apply - A command button used to apply the selected Size/Type Code and close the selection screen.
Cancel - A command button used to close the selection screen without applying a Size/Type Code.
Bradley B. Bean, PE
Revision - 001, Copyright 2014, All Rights Reserved.
Page 3 of 5
GASCalc™ 5.0 Help Reference
Fitting Selection Screen
Home
! When using the Type/Size selection method, more than one Size/Type Code may be available for the selected
fitting type and nominal size values. When this occurs, select the desired code from the list.
! Only codes for records where the Display item in the Fitting Property table is set to Yes, are displayed in the Full
list and Size/Type Code list.
Bradley B. Bean, PE
Revision - 001, Copyright 2014, All Rights Reserved.
Page 4 of 5
GASCalc™ 5.0 Help Reference
Fitting Selection Screen
Home
See Also
Bradley B. Bean, PE
Revision - 001, Copyright 2014, All Rights Reserved.
Page 5 of 5