Professional Documents
Culture Documents
Ao Norm V1 02
Ao Norm V1 02
Function block
AO_NORM_V1_02
for PC Worx 6
Documentation for
PHOENIX CONTACT function blocks
PHOENIX CONTACT GmbH Co. KG
Flachsmarktstrasse 8
D-32825 Blomberg, Germany
This documentation is available in English only.
AO_NORM_V1_02 2/4
Table of Contents
1 AO_NORM
1.1 Call
1.2 Description
1.3 Input parameters
1.4 Output parameters
1.5 Diag codes
1.6 Module types
AO_NORM_V1_02 3/4
1 AO_NORM
The AO_NORM function block converts a standardized value on an analog output module.
1.1 Call
1.2 Description
The AO_NORM function outputs a standardized analog value to an analog output module. This module is intended
for the listed output modules manufactured by Phoenix Contact.
The AO_NORM standardization block cyclically converts the rIn values into analog values for the Phoenix Contact
analog modules. The block is not responsible for hardware error messages (module) or for parameterizing the
module.
1.2.1 Example
Output area : 0 V to 10 V (unipolar)
Parameterized rLoLim : 2000
Parameterized rHiLim: 4000
xError INT 0 = No error 1 = Invalid module variant 2 = Limit value error: ULV = LLV or ULV <
LLV 3 = rIn is not in range between rHiLim in rLoLim
wOut WORD Output variable of analog channel
Caution: In case of error, the last valid output values remain unchanged in status.