Professional Documents
Culture Documents
1. acceptor ions
2. donor ions
3. free electrons
4. holes
1. Current gain
2. Impedance matching
3. Voltage gain
a. Power transformer
b. Current transformer
c. Step-up transformer
d. Step-down transformer
A) 2
B) 1.21
C) 2.5
D) 0.48
6. Question1 points
a. DC synchro system
b. AC synchro system
d. only b is correct
7. Question1 points
Which one of the following system provides the information about the position and liquid contents
8. Question1 points
A) smooth DC voltage
B) steady DC voltage
C) pulsating DC voltage
D) AC voltage
9. Question1 points
1. four
2. three
3. one
4. two
1. High
2. Very high
3. Almost zero
4. Low
A) doping
B) coupling
C) covalent bonding
1. heavily
2. moderately
3. lightly
1. Digital IC
2. Linear IC
a. Electronic devices
b. Hydraulic devices
c. Mechanical devices
A)40.6%
B) 81.2%
C)50%
D) 25%
1. Resistors
2. Capacitors
a. Rotary devices
b. Electromechanical devices
Which one of the following system produces error voltage signal in receiving element
a. Torque synchro
b. Control synchro
c. Differential synchro
d. Resolver
1. heavily
2. moderately
3. lightly
A) an amplifier
B) a voltage regulator
C) a multivibrator
D) a rectifier
C) forward
In torque synchro system which one of the following winding works as a secondary winding
a. Rotor winding
b. Stator winding
d. Only a is correct
d. Ata
1. A resistor
2. An insulating layer
3. Mechanical output
A) not baised
B) forward biased
C) reverse biased
1. Transistors
2. Diodes
3. Resistors
3. both inputs
A) 1 PN junction
B) 2 PN junction
C) 3 PN junction
D) 4 PN junction
A) constant voltage
B) constant current
C) constant resistance
c. Depends on situation
1. differential amplifier
3. CE amplifier
4. swamped amplifier
a. Linier position
b. Angular position
d. Only a is correct
When voltage feedback (negative) is applied to an amplifier, its input impedance ………….
1. Is decreased
2. Is increased
a. Toroidal resistor
b. Fixed resistor
c. Variable resistor
1. one pn junction
2. two pn junctions
3. three pn junctions
4. four pn junctions
a. Mutual induction
b. Electromagnetic induction
c. Lenz’s law