Professional Documents
Culture Documents
10. The standard for long distance analog signal transmission in process control industry is
a) 4-20 mV
b) 0-20 mA
c) 4-20 mA
d) 0-5 V
11. An 8-bit, unipolar SAR type ADC is used to convert 3.5 V to digital equivalent output.
The reference voltage is +5V. The output of the ADC, at the end of 3rd clock pulse after
the start of conversion is
a) 1010 0000
b) 1000 0000
c) 0000 0001
d) 0000 0011
12. A switch-tail ring counter is made by using a single D flip flop. The resulting circuit is a
a) SR flip flop
b) JK flip flop
c) D flip flop
d) T flip flop
13. A zener diode works on the principle of
a) Tunneling of charge carries across the junction
b) Thermionic emission
c) Diffusion of charge carries across the junction
d) Hopping of charge carries across the junction
14. The IGBT resulted in higher switching speed and lower energy losses. It can be used for
a) Uninterruptible power supplies
b) Induction heating system
c) Constant voltage and frequency power supplies
d) All of these
15. A single phase full bridge inverter can operated in load commutation mode in case load
consist of A single phase full bridge inverter can operated in load commutation mode in
case load consist of
a) RL.
b) RLC underdamped.
c) RLC overdamped.
d) RLC critically damped.
16. Poles and zeros are arranged alternatively on negative real axis, then type of network
is/are
a) LC & RC network
b) RC & RL network
c) RL & LC network
d) LC network
17. If a circuit consisting of two mass elements, two spring elements and four friction elements. Find
the order of transfer function?
a) 2
b) 4
c) 6
d) 12
18. The steady state error due to ramp input for a type two system is equal to
a) Zero
b) Infinite
c) Non zero number
d) Constant
20. The degree of freedom for the human arm with respect is
a) 5
b) 6
c) 7
d) 8