Professional Documents
Culture Documents
Revoseal Gasket Product Catalog
Revoseal Gasket Product Catalog
PRODUCT CATALOG
Table of contents
Services............................................................................................. page 20
revoseal gaskets in comparison.................................................. page 21
2
revoseal. awesome gaskets.
Awesome applications require awesome gaskets
The productivity of a system decides on its com At revoseal innovative capacity, quality and technology
petitiveness – in particular in international process are combined with international service, professional
industries. In the chemical, petrochemical, gas pro key-accounting and technical expertise for sector-
duction and related sectors, the small and almost specific requirements also in pharma and food.
invisible elements of a facility or a column are playing
At their Cologne location revoseal invests in research
a crucial role; we are talking about gaskets. Their
and development thus providing for a sustainable basis
technology, quality and durability decide on productivity
needed for further continuous improvement of the
or downtime.
products as well as expansion of the portfolio in the
revoseal is partner of the process industry for extra near future.
ordinarily efficient gaskets and with the necessary
products, patents and technical know-how.
3
revoseal gasket concept
The high level of functionality of the international patented revoseal flange gaskets is based on a pri
marily metallic sealing concept. This provides a maximum of seal tightness and outstanding perfor
mance in conjunction with secondarily sealing soft materials (graphite or PTFE). Where conventional
flange gaskets reach their limits revoseal gaskets guarantee a higher plant availability and reliability.
Due to the long life time the maintenance costs can also be reduced.
revoseal JG/JP
The internationally patented geometry of outer and inner cogging com
pletely encapsulates the graphite or PTFE layers. The tooth geometry has
been calculated in such a way that even at using low quality bolts an ideal
compression of the graphite layers and a double metallic sealing can be
achieved. Therefore, Jungtec JG or JP (encapsulated flat profile gaskets)
combine the advantages of metal and composite materials in an ideal way.
Highlights
›› The effective gasket width can be adapted in order to achieve optimum sealabi
lity in accordance to the Technical Instructions on Air Quality Control (TA-Luft),
VDI 2290 according to DIN EN 1591.
› Temperature: 270°C to + 1000°C (dependent on the carrier material)
› Pressure: from vacuum to 400 bar (1,500 lbs)
› Lowest leakage rates of all gaskets available on the market
› Standard material: 1.4571 (additional materials on request)
› Total thickness 4.2 mm (additional thicknesses on request)
› JG/JP profiles reproduce the tongue and groove principle
› Fire Safe Certificate according to API 607 (also for PTFE) and blowout resistance
according to VDI 2200
JG/JP 1 Encapsulated flat-profile gasket suitable for tongue & groove and male and female
facings according to DIN EN 1514-4 TG and SR.
JP Top JP TOP has the same properties as JP 2. In addition it has a secondary sealing
of graphite or PTFE. This design is especially suited for cold chemicals building a
corrosive medium in contact with air (atmosphere).
Vario JG and JP gaskets are also available with our Vario-centering system
(see page 8).
REVOSEAL JG/JP 5
Dimensions JG/JP
Encapsulated flat profile gasket with centring ring and predetermined breaking groove for raised face and full face flanges form B
according to DIN EN 1092-1
[DN] d1 d2 d3
10 22 36 36 36 46 46 46 46 56 56 56 67 67 67
15 26 42 42 42 51 51 51 51 61 61 61 72 72 78
20 31 47 47 47 61 61 61 61 72 72 - - - -
25 36 52 52 52 71 71 71 71 82 82 82 83 92 104
32 46 62 62 66 82 82 82 82 88 88 - - - -
40 53 69 69 73 92 92 92 92 103 103 103 109 119 135
50 65 81 81 87 107 107 107 107 113 119 119 124 134 150
65 81 100 100 103 127 127 127 127 137 143 143 153 170 192
80 95 115 115 121 142 142 142 142 148 154 154 170 190 207
100 118 138 138 146 162 162 168 168 174 180 180 202 229 256
125 142 162 162 178 192 192 194 194 210 217 217 242 274 301
150 170 190 190 212 217 217 224 224 247 257 257 284 311 348
175 195 215 215 245 247 247 254 265 277 287 284 316 358 402
200 220 240 248 280 272 272 284 290 309 324 324 358 398 442
250 270 290 300 340 327 328 340 352 364 391 388 442 488 -
300 320 340 356 400 377 383 400 417 424 458 458 536 - -
350 375 395 415 - 437 443 457 474 486 512 - - - -
400 426 450 474 - 489 495 514 546 543 572 - - - -
450 480 506 - - 539 555 564 571 - - - - - -
500 530 560 588 - 594 617 624 628 657 704 - - - -
600 630 664 700 - 695 734 731 747 764 813 - - - -
700 730 770 812 - 810 804 833 852 879 950 - - - -
800 830 876 886 - 917 911 942 974 988 - - - - -
900 930 982 994 - 1017 1011 1042 1084 1108 - - - - -
1000 1040 1098 1110 - 1124 1128 1154 1194 1220 - - - - -
1200 1250 1320 1334 - 1341 1342 1364 1398 1452 - - - - -
1400 1440 1522 - - 1548 1542 1578 1618 - - - - - -
1600 1650 1742 - - 1772 1764 1798 1830 - - - - - -
1800 1850 1914 - - 1972 1964 2000 - - - - - - -
2000 2050 2120 - - 2182 2186 2230 - - - - - - -
2200 2250 2328 - - 2384 2378 - - - - - - - -
2400 2460 2512 - - 2594 - - - - - - - - -
DIN / Inch = nominal width • The graphite dimensions for a flange calculation are available on our website - revoseal.com
The total thickness is 4.2 + /- 0.1 mm • other thicknesses available • also available in other DIN and ANSI dimensions • Design and calculation
according to revoseal factory standard
6 REVOSEAL JG/JP
Dimensions JG/JP Dimensions JG 1
Encapsulated flat profile gasket JP-2 with centring ring and predetermi Encapsulated flat profile gasket for tongue & groove
ned breaking groove for flanges according to ANSI B16.5 according to DIN 2512 and EN 1514-1 form TG
[inch] d1 d2 d3 DN d1 d2 Dicke
[inch] 150- 400- 900- 150 300 400 600 900 1500 10 24 34 2
300 600 1500 lbs lbs lbs lbs lbs lbs
lbs lbs lbs 15 29 39 2
20 36 50 2
1/2 23 33 33 33 44,4 50,8 50,8 50,8 60,3 60,3
25 43 57 2
3/4 29 40 40 40 53,9 63,5 63,5 63,5 66,7 66,7
32 51 65 2
1 37 47 47 47 63,5 69,8 69,5 69,5 76,2 76,2
40 61 75 2
1 1/4 44 60 60 60 73,0 79,4 79,4 79,4 85,7 85,7
50 73 87 2
1 1/2 52 70 70 70 82,5 92,1 92,1 92,1 95,2 95,2
65 95 109 2
2 70 89 89 89 101,8 108,0 108,0 108,0 139,7 139,7
80 106 120 2
2 1/2 83 102 102 102 120,6 127,0 127,0 127,0 161,9 161,9
100 129 149 2,5
3 94 124 124 124 133,4 146,1 146,1 146,1 165,1 171,5
125 155 175 2,5
3 1/2 111 136 136 136 158,8 161,9 158,7 158,7 - -
150 183 203 2,5
4 124 149 149 149 171,5 177,8 174,6 190,5 203,2 206,4
200 239 259 2,5
5 151 176 176 176 193,7 212,7 209,5 238,1 244,5 250,8
250 292 312 2,5
6 179 209 209 209 219,1 247,7 244,5 263,5 285,8 279,4
300 343 363 2,5
8 229 260 260 260 276,2 304,8 301,6 317,5 355,6 349,3
350 395 421 3
10 283 313 313 313 336,5 358,8 355,6 396,9 431,8 431,8
400 447 473 3
12 340 370 370 378 406,4 419,1 415,9 454,0 495,3 517,5
500 549 575 3
14 372 402 402 409 447,7 482,6 479,4 488,9 517,5 574,7
600 649 675 3
16 422 457 457 467 511,2 536,6 533,4 561,9 571,5 638,1
700 751 777 3
18 479 514 514 530 546,1 593,7 590,5 609,6 635,0 701,7
800 856 882 3
20 530 570 570 581 603,2 650,9 644,5 679,5 695,3 752,4
900 961 987 3
22 581 621 621 632 657,2 701,7 698,5 730,3 - -
1000 1061 1093 4
24 632 672 672 682 714,4 771,5 765,2 787,4 835,0 898,5
JG/JP 1 JG 2
Ø d1
Ø d1 Ø d2
Ø d2 Ø d3
REVOSEAL JG/JP 7
Universal centering system
Highlights
›› Considerable reduction of type varieties
›› Accurate centering of the gasket
›› Considerable cost-savings in procurement and storage
›› No danger of confusion
›› Easy assembly at using fatigue-shaft screws
6“,
300 lbs
ANSI-flanges
6“,
150 lbs
DN 150,
PN 10/16
DN 150,
PN 25/40
DN 150,
PN 64
DIN-flanges
DN 150,
PN 100/160
For flanges DIN 2667-2629 series 1, DIN 2627-2629 series 1, DIN 2632-2638 series 1, DIN EN 1092-1, ANSI B 16.5
10 1/2 10-160 150-1500 16,7 33,3 200 8 10-160 150-600 220,7 241,3
32 1 1/4 10-40 150-1500 44,7 61,3 250 10 250 900-1500 262,7 332,3
40 1 1/2 10-160 150-1500 51,7 68,3 300 12 10-40 150-300 318,7 339,3
65 2 1/2 10-250 150-600 79,7 101,3 350 14 64-100 400-600 362,7 403,3
125 5 10-160 150-400 148,7 169,3 500 20 10-40 150-400 528,7 559,3
150 6 10-160 150-600 164,7 181,3 600 24 10-40 150 628,7 664,3
revoseal Revolution
The Revolution gasket is an embossed flat profile gasket consisting of a
flexible stainless steel carrier and encapsulated graphite or PTFE on both
sides. By the revolutionary construction and flexibility of the embossed cog
height double metallic sealing as well as encapsulation of the graphite or
PTFE is guaranteed. Owing to its wide application range, Revolution is the
alternative to all conventional flat gasket types.
Highlights
› Temperature: 270°C to + 500°C
› Pressure range: from vacuum to 64 bar (400 lbs)
› Overachieves TALuft and VDI 2290 in connection with a
leakage check according to EN 1591-1 (also at using screws
of minor quality)
›› Standard material 1.4571 (optional: 1.4404)
›› Available for DIN and ANSI – flanges to DN 400 / 16”
›› Available with graphite or PTFE coating
›› Total thickness 1.6 mm (+/- 0.1 mm)
›› Fire Safe Certificate according to API 607 (also for PTFE)
and blow-out resistance according to VDI 2200
Revolution The Revolution Top has the same properties as the Revolution. It is, how
ever, additionally provided with a secondary sealing of graphite with low
Top density or PTFE. The secondary seal prevents from flange corrosion as
often seen with carbon steel flanges.
Revolution The Revolution tongue & groove has the same properties as the Revo
lution. Additionally, this type is equipped with a stainless steel mounting
tongue & flap for smarter installation and removal.
groove
REVOSEAL REVOLUTION 11
Dimensions Revolution DIN
[DN] d1 d2 d3
PN 10-64 PN 10 PN 16 PN 25 PN 40 PN 64
10 22 36 46 46 46 46 56
15 22 39,5 50 50 50 50 61
20 28 46,0 61 61 61 61 -
25 35 53,5 71 71 71 71 82
32 43 62,0 82 82 82 82 -
40 50 69,0 92 92 92 92 103
50 61 80,0 107 107 107 107 113
65 77 97,5 127 127 127 127 137
80 92 115,0 142 142 142 142 148
100 115 139,0 162 162 168 168 174
125 142 169,0 192 192 194 194 210
150 168 194,0 218 218 224 224 247
200 224 251,0 272 272 284 290 309
250 270 298,0 327 328 340 352 364
300 320 348,0 377 383 400 417 424
350 375 405,0 437 443 457 474 486
400 426 459,0 489 495 514 545 543
DIN / Inch = nominal width • The graphite dimensions for a flange calculation are available on our website - revoseal.com
Total thickness is 1.6 + /- 0.1 mm
Design and calculation according to revoseal factory standard
For flanges according ANSI B 16.5 For flanges according DIN 2512 and EN1514-1 TG
[inch] d1 d2 d3 [DN] d1 d2
150 lbs 300 lbs 400 lbs 10 24 34
12 REVOSEAL REVOLUTION
Revolution
Ø d1
Ø d2 Ø d1
Ø d3 Ø d2
REVOSEAL REVOLUTION 13
Metal flat profile gaskets with layers
revoseal Eco+
-
Eco+ In traditional systems the Eco+ can be used as high-quality replacement for all
kinds of flat gaskets up to 2 mm overall height. Due to the thin soft material layers,
high surface pressures are already achieved at low bolt forces. At new cons
tructions the Eco+ is the most cost-efficient and technically better alternative to
serrated and spiral wound gaskets. Due to the resilient design, retightening of the
screws is no longer necessary even at strong pressure and temperature fluctuati
ons.
Eco PU The Eco PU has a PTFE-U–jacket with diffusion barrier. Therefore, it is best suited
for aggressive media in plastic and enamel flanges. Even with low bolt torque
forces high surface pressures can be realised.
Eco Top The Eco TOP has the same properties as the Eco+. It is, however provided with a
secondary graphite layer with lower density or PTFE. The secondary seal prevents
from flange corrosion as often seen with carbon steel flanges.
14 REVOSEAL ECO+
Dimensions Eco+
[DN] d1 d2 d3
PN 10 PN 64 PN PN PN 10 PN 16 PN 25 PN 40 PN 64 PN PN PN 10 PN 16 PN 25 PN 40 PN 64 PN PN
- 40 100 160 100 160 100 160
15 22 22 22 22 40 40 40 40 40 40 40 51 51 51 51 61 61 61
20 32 - - - 50 50 50 50 - - - 61 61 61 61 - - -
25 40 40 40 40 58 58 58 58 58 58 58 71 71 71 71 82 82 82
32 49 - - - 69 69 69 69 - - - 82 82 82 82 - - -
40 57 57 57 57 77 77 77 77 77 77 77 92 92 92 92 103 103 103
50 68 68 68 68 88 88 88 88 88 88 88 107 107 107 107 113 119 119
65 85 85 85 85 107 107 107 107 107 107 107 127 127 127 127 138 144 144
80 102 102 102 102 124 124 124 124 124 124 124 142 142 142 142 148 154 154
100 123 123 123 123 151 151 151 151 155 155 155 162 162 168 168 174 180 180
125 148 148 148 148 176 176 176 176 180 180 180 192 192 194 194 210 217 217
150 176 176 176 176 204 204 204 204 214 214 214 218 218 224 224 247 257 257
200 224 224 224 224 252 252 252 256 262 268 268 273 273 284 290 309 324 324
250 283 283 283 283 315 315 315 321 321 331 331 328 329 340 352 364 391 388
300 330 330 330 330 362 362 368 368 378 378 388 378 384 400 417 424 458 458
350 370 370 370 - 402 402 402 402 408 412 - 438 443 457 474 486 512 -
400 420 420 420 - 452 452 452 458 458 468 - 489 495 514 546 543 572 -
450 480 - - - 518 518 528 528 - - - 539 555 564 571 - - -
500 530 530 530 - 568 568 568 578 578 584 - 594 617 624 628 657 704 -
600 630 630 - - 668 668 668 678 688 - - 695 734 731 747 764 - -
700 730 730 - - 768 768 778 778 788 - - 810 804 833 852 879 - -
800 830 830 - - 878 878 888 898 898 - - 917 911 942 974 988 - -
900 930 930 - - 978 978 988 998 998 - - 1017 1011 1042 1084 1108 - -
1000 1040 1040 - - 1098 1098 1108 1118 1118 - - 1124 1128 1154 1194 1220 - -
DIN / Inch = nominal width • The graphite dimensions for a flange calculation are available on our website - revoseal.com
Total thickness is 1.6 + /- 0.1 mm • also available in other DIN and ANSI dimension
Design and calculation according to revoseal factory standard
REVOSEAL ECO+ 15
Dimensions Eco+
[inch] d1 d2 d3
150-400 600-900 150 lbs 300 lbs 400 lbs 600 lbs 900 lbs 150 lbs 300 lbs 400 lbs 600 lbs 900 lbs
lbs lbs
DIN / Inch = nominal width • The graphite dimensions for a flange calculation are available on our website - revoseal.com
Total thickness is 1.6 + /- 0.1 mm • also available in other DIN and ANSI dimension
Design and calculation according to revoseal factory standard
ECO+
Ø d1
Ø d2
Ø d3
16 REVOSEAL ECO+
Embossed metal gasket
revoseal Visio
The Visio consists of a solid stainless steel carrier with embossed inside and out
side cog and graphite or PTFE layers on both sides.
Highlights
› Temperature: 270°C to + 500°C
› Pressure: from vacuum to 160 bar (900 lbs)
Visio The Visio consists of a solid stainless steel carrier with embossed inside
and outside cog and graphite or PTFE layers on both sides. It is also sui
table for tongue and groove, male and female facings and device flanges
with webs. Owing to the flexible construction re-tightening of the flanges is
no longer necessary also at strong pressure and temperature fluctuations.
REVOSEAL VISIO 17
Dimensions Visio
[DN] d1 d2 d3
PN 10- PN 64 PN PN PN 10 PN 16 PN 25 PN 40 PN 64 PN PN PN 10 PN 16 PN 25 PN 40 PN 64 PN PN
40 100 160 100 160 100 160
DIN / Inch = nominal width • The graphite dimensions for a flange calculation are available on our website - revoseal.com
Total thickness is 1.6 + /- 0.1 mm • Additional thicknesses available • also available in other DIN and ANSI dimensions
Design and calculation according to revoseal factory standard
18 REVOSEAL VISIO
Dimensions Visio
For flanges according ANSI B 16.5
[inch] d1 d2 d3
150-400 600-900 150 lbs 300 lbs 400 lbs 600 lbs 900 lbs 150 lbs 300 lbs 400 lbs 600 lbs 900 lbs
lbs lbs
1/2 17 17 29,5 29,5 29,5 29,5 29,5 44,8 50,8 50,8 50,8 60,2
3/4 22 22 34,5 34,5 34,5 34,5 34,5 54,2 63,5 63,5 63,5 66,5
1 30 30 42,5 42,5 42,5 42,5 42,5 63,5 69,8 69,8 69,8 76,2
1 1/4 39 39 54,5 54,5 54,5 54,5 54,5 73,2 79,5 79,5 79,5 85,9
1 1/2 45 45 60,5 60,5 60,5 60,5 60,5 82,9 91,9 91,9 91,9 95,6
2 57 57 78,5 78,5 78,5 78,5 78,5 101,6 107,9 107,9 107,9 139,7
2 1/2 72 72 91,5 91,5 91,5 91,5 91,5 120,6 127,0 127,0 127,0 162,1
3 92 92 113,5 113,5 113,5 113,5 113,5 133,3 145,7 145,7 145,7 165,1
3 1/2 102 102 123,5 123,5 123,5 123,5 - 158,7 161,8 158,8 158,8 -
4 117 117 140,5 140,5 140,5 140,5 140,5 171,4 177,8 174,8 190,5 203,1
5 142 142 167,5 167,5 167,5 167,5 167,5 193,5 212,6 209,6 238,3 244,30
6 170 170 197,5 197,5 197,5 197,5 197,5 218,9 247,3 244,3 263,7 285,70
8 222 222 251,5 251,5 251,5 251,5 251,5 276,1 304,8 301,8 317,5 355,6
10 278 278 300 306 306 312 312 336,6 359 355,6 396,7 431,8
12 326 326 364 364 364 368 368 406,4 419,1 415,8 453,9 495,3
14 370 370 400 400 400 400 400 447,9 482,6 479,3 489 517,7
16 420 420 456 456 456 456 456 511,4 536,4 533,4 562,2 571,5
18 480 480 518 518 520 520 520 546,1 593,6 590,6 609,6 635
20 530 530 568 568 570 570 570 603,2 650,7 644,7 679,4 695,5
24 630 630 668 678 678 678 678 714,2 771,7 765 787,4 835,2
DIN / Inch = nominal width • The graphite dimensions for a flange calculation are available on our website - revoseal.com
Total thickness is 1.6 + /- 0.1 mm • also available in other DIN and ANSI dimensions
Design and calculation according to revoseal factory standard
Visio
Ø d1
Ø d2
Ø d3
REVOSEAL VISIO 19
Services
The requirements for sealing systems in industry relating to environ
mental protection, plant availability and security have been considerably
tightened over the last few years.
Qmin(L) required minimum surface pressure for tightness class L during assembly MPa
QSmin(L) required minimum surface pressure for tightness class L after unloading (operation) MPa
20 REVOSEAL SERVICES
revoseal gaskets in comparison
Temperature range 1) -270°C to +500°C from -270°C to +400°C from -270°C to +500°C from -270°C to +1000°C 2)
Pressure range vacuum to 64bar vacuum to 160bar vacuum to 160bar from vacuum to 400bar
Soft materials graphite / PTFE graphite / PTFE graphite / PTFE graphite / PTFE
Carrier material 1.4571 / 1.4404 1.4571 1.4571 various stainless steels, nickel, duplex
steels, titanium grades, carbon steel etc.
DVGW (DIN 3535-6) On request it is possible to use certified soft materials according to DVGW (DIN3535-6)
This includes for example gaskets for heat exchangers, pressure vessels, tank
and filter systems as well as devices and equipment for the following areas:
Due to their design appliances like heat exchangers often have a small wall thickness and a
weak flange geometry. Therefore, it is often a challenge to find the right gasket.
With regard to device flanges the appropriate seal width can be modified for the qualified
mathematical verification of the technical tightness according to TA-Luft, VDI 2290 according
to DIN EN 1591-1.
JP special (for flange combination comprising form B and C) JP double (with holes for leakage sensors)
Standard gaskets
As to complete the product portfolio and for the qualification as full-range
provider revoseal offers also all established standard gaskets like metal
gaskets with soft materials (grooved gaskets and spiral wound gaskets) as
well as metal gaskets in all industry standards and manufactured from a
wide variety of materials.
revoseal SWG
spiral wound gaskets
revoseal KJ
grooved gaskets
revoseal RJ
ring joint gaskets
revoseal SJ
weld ring gaskets
STANDARD GASKETS 23
Spiral wound gaskets
revoseal SWG
Highlights
›› total thickness: 4.5 mm (additional thicknesses on request)
›› available in different carrier materials
›› available with graphite, PTFE or Mica als filler material
›› factory standards: EN1514-2, ASME B16.20 etc.
(also available in special dimensions)
SIA Spiral wound gasket with inner and outer ring, with graphite or
PTFE filler material
S Spiral wound gasket without inner and outer ring, with graphite
or PTFE filler material (e.g. for tongue & groove)
24 REVOSEAL SWG
Grooved gaskets
revoseal KJ
Highlights
›› total thickness: 5.0 mm (4.0 mm metal core + 2x 0.5 mm graphite layer)
(additional thicknesses on request)
›› available in different carrier materials
›› available with graphite or PTFE layer
›› All designs also available with crowned profile
›› factory standards: EN1514-6, EN 12560-6, ASME B16.20, etc.
(also available in special dimensions)
KJ2 Grooved gasket with centering ring, breaking point groove and
graphite or PTFE coating
KJ3 Grooved gasket with loose centering ring and graphite or PTFE
coating
REVOSEAL KJ 25
Ring joint gaskets
revoseal RJ
Ring joint gaskets (series RJ) by revoseal are applied primarily in refineries and in the
petro-chemical industry.
Highlights
›› factory standard: ASME B16.20
26 REVOSEAL RJ
Ring joint
gaskets
RJ-O, RJ-K
d b h oval d octagonal
REVOSEAL RJ 27
ring [DN] inch [PN] Ibs ring dimensions
d b h oval d octagonal
28 REVOSEAL RJ
ring [DN] inch [PN] Ibs ring dimensions
d b h oval d octagonal
Ring joint
gaskets
RJ – RX
Dimension table type RJ – RX
d b c h1
REVOSEAL RJ 29
ring [DN] inch [PN] Ibs ring dimensions h2 bore e
d b c h1
30 REVOSEAL RJ
Ring joint
gaskets
RJ – BX
d b c h1
Tolerances: d -0.15 mm. b +0.2 mm. h +0.2 mm. Design according to revoseal factory standard
REVOSEAL RJ 31
Weld ring gaskets
revoseal SJ
Revoseal weld ring gaskets (series SJ) are applied primarily in chemical and
petrochemical industries namely in areas where hazardous media appear
and where absolute gasket reliability is required. A long-term technical tight
ness can be achieved by welding the two diaphragm parts together.
Highlights
›› Types SJ-11, SJ-12, SJ-13 are also available with a seconda
ry seal as grooved gasket or spiral gasket.
›› Available in different materials and additional types
›› Factory standards: DIN, ASME, EN, GOST, JIS, etc. (also
available in special dimensions)
32 REVOSEAL SJ
Assembly guide for
flange gaskets
Note: It must be ensured that neither the gasket nor the In general screw connections should be retightened only
flange sealing areas come into contact with lubricants. in pressureless condition.
Note: With regard to flanges that are equipped with a large number of screws it is recommended to transfer the numeration
directly onto the flange.
BOLTING PATTERN 35
Materials and designations
designation short term mate- alloy AISI / DIN / EN UNS AMS BS yield tensile hardness temperature tight- elonga-
DIN17006 rial DIN ASTM strength strength HB range °C ness tion min/
17007 N/mm2 RP Rm KG/ max
0.2 dm3
pure iron z. B. S235 1.1003 – soft iron – – – – 180-230 300-340 90-100 -60 to +450 7.86 8%-11%
(e.g. Armco) JRG1
modified soft StW24 1.0335 DD14 soft iron DIN 1614; EN 10111/ – – – 185-195 170-400 80-90 -60 to +450 7.86 20%-40%
iron 10149-2/ 10051
pressure P265GH 1.0425 – – DIN EN 10028-2 – – – 205-230 410-530 130-180 -60 to +450 7.85 22%-28%
vessel steel
general St33 1.0035 – – – – – – 190 285-295 95-120 -40 to +500 7.85 8%-11%
construction
steel RSt 37-2 1.0122 A105 A570 DIN 5512-1; – – S235 215-235 340-370 100-110 -40 to +500 7.85 8%-11%
Gr36 EN 10025-2/10277-2
St35.8 1.0305 A106 DIN50112-1 P235 190-240 360-440 100-130 -40 to +500 7.85
electro-gal- St12 1.0330 DC01 1008 DIN5512-2 G 10080 DC 01/ 140-320 290-430 100-110 -40 to +500 7.85 24%-30%
vanized 1449
steel Part 1
sheet steel Ust 13. St13 1.0333 – A366 – – – – 245-255 270-370 50-60 -40 to +500 7.85 20%-30%
corrosion X12Cr 13 1.4006 410 AISI 410; DIN SEW310; EN10088- S41000 5351/ – 210-340 450-600 195-205 -40 to +500 7.85 20%-30%
and acid-re- ASTM 1’-2’-3/10250-4/10263- 5504/
sistant steel F1079 5/10272/10297-2 5505/ 5591
X6Cr 17 1.4016 430 – DIN5512-3; EN10088- – – – 210-340 450-600 190-200 -20 to +350 7.85 20%-30%
1/2/3/ 10151/ 10250/
10263/ 10296/ 10297
X20Cr 13 1.4021 420 AISI 420 DIN SEW310; EN10088- S4200 5351/ – 300-420 500-700 220-230 -20 to +500 7.85 15&-30%
1’-2’-3/10250-4/10263- 5504/
5/10272/10297-2 5505/ 5591
X5CrNi 18 10 1.4301 304 304 DIN4133/5512-3/ S30400 170-190 500-600 130-180 -250 to +550 8.00 40%-55%
SEW310
X5CrNiMo 17 1.4401 316 – DIN5512-3/8566-2 S31600 / 5524K/ 1501/ 250-310 550-700 130-180 -110 to +550 7.95 40%-55%
12 2 S31609 5573L/ 1503/
5690L/ 1506/
5907A 1554
X2CrNiMo 17 1.4404 316L – 17440 S31603 – – 250-310 550-700 120-180 -110 to +550 7.95 40%-55%
12 2
X6CrNiTi 1.4541 321 321/B8TA DIN4133/5512; S32100 AMS 970/ 240-320 540-740 130-190 -250 to +550 7.90 40%-55%
18 10 EN10028/ 10088/ 7325F/ 1501/
10216/ 10217/ 10222/ 7490N/ 1502/
10250/ 10263/ 10272/ 5510/ 1503/
10296/ 10297/ 10312/ 5557/ 3605/
50112 5559/ 3606
5570/
5645/
5689/
5896/ 7211
X6CrNiNb 1.4550 347 347/B8CA DIN17440; EN10028/ – – – – – – – – –
18 10 10088/ 10216/ 10217/
10222/ 10250/ 10272/
10296/ 10297
– – 970/ 1501/ 240-320 500-700 130-190 -250 bis 7.90 40%-55% – – – – –
1502/ 1503/ +550
3605/ 3606
X6CrNiMoTi 1.4571 316Ti 316Ti DIN4133/5512; S31635 – 970/ 255-320 540-690 130-190 -110 to +550 7.98 40%-55%
17 12 2 EN10028/ 10088/ 1501/
10216/ 10217/ 10222/ 1554
10250/ 10263/ 10272/
10296/ 10297/ 10312
heat resis- X10CrAlSi 25 1.4762 446 – DIN43700/43720/ S44600 QQ-S-763 – 280-350 520-720 210-230 -110 to +800 8.00 9%-14%
tant stain- SEW 310/ SEW 470;
less steel EN10088/10095
X15CrNiSi 1.4828 309 309 DIN SEW310 / SEW 470; S30900 QQ-S-763 1449 245-320 550-770 200-220 -110 7.90 20%-30%
20 12 EN 10088/10095/10296 to+1000
X12NiCrSi 3 1.4864 330-DS MT330/ DIN SEW310 / SEW 470; N08330 250-320 550-750 215-225 -110 8.00 25%-35%
5 16 N08330 EN 10088/10095 to+1000
X10NiCrAl 3 1.4876 800 N08800/ DIN SEW310 / SEW 470; N08800/ 5766D / 3072/ 200-280 450-680 185-195 -110 8.00 25%-35%
2 20 8810/ EN10088/10095/10297 8810 5871D 3073/ to+1000
8811/ 3074/
8332 3075/
3076
creep resis- 16Mo3 1.5415 F /P 1 A/B/C DIN 4133/SEW 310; EN K11820/ – 1501/ 200-310 400-600 130-170 -20 to +530 7.85 20%-30%
tant steel 10028/ 10216/ 10217/ K12020/ 3059/
10222/ 10273 K12320 3606
13CrMo 4 5 1.7335 F/P11 F/P12 ASTM DIN SEW310; K11562/ – 1501/ 250-320 440-600 130-175 -60 to +560 7.85 20%-30%
F12 EN10028/10216/ K11757/ 1502/
10222/10273 K12062 1503
high pres- 12CrMo 19 5 1.7362 F/P 5 AISI DIN SEW028 / SEW310; K41545/ 6467D – 250-320 450-690 175-220 -40 to +650 7.85 20%-30%
sure water 501/502; EN 10028/10216 S50100/
resistant ASTM F5 S50200
construction
steel
creep 10CrMo 9 10 1.7380 F/P 22 ASTM DIN SEW310; K21390/ – 1501/ 200-300 480-630 130-175 -40 to +590 7.85 18%-25%
resistant F22 EN10028/10216/10273 K21590 1502/
construction 3059
steel
12CrMo 9 1 1.7386 F/P 9 AISI 504 DIN SEW310; EN10216 K90941/ – 3059 220-390 590-740 210-220 -40 to +500 8.00 18%-25%
ASTM F9 S50400/
S50488
The German materials according to DIN can only be compared approximately with other assigned materials. The interchangeability
between the respective materials must be examined on an individual basis.
AISI = American Iron Steel Institute • ASTM = American Society for Testing of Materials • UNS = United Numbering System
SS = Swedish Standard • AFNOR = Association Francaise de Normalisation • BS = British Standard • ( ) = standardization in preparation
1 Mpa 1 10 1 145.04 bar Pressure Nominal (PN) Ibs. (PSIG) ASME Class #
17 250
20 20 150
Temperature 25 25
35 500
K °C °F 40 40
K °C + 273.15 (°F - 459.67) x 5/9 50 50 300
°C K - 273.15 (°F - 32) x 5/9 52 750
°F K x 9/5 - 459.67 °C x 9/5 + 32 64 64 400
70 1000
105 1500
140 2000
175 2500
210 3000
245 3500
280 4000
38 TECHNICAL INFORMATION
Application examples
APPLICATION EXAMPLES 39
revoseal Europe GmbH
Industriestr. 1
50259 Pulheim | Germany
oil and gas • chemical and petrochemical • pharma and food • engineering and machine building • and many more | revoseal.com