Professional Documents
Culture Documents
To achieve new ground-breaking formulations that Thus BASF will develop the right solution that
have outstanding workability and physical proper- exactly fits your local requirements and is based
ties, your system needs the right raw materials. on your specific raw materials.
Waterproofing Applications
waterproofing membrane
waterproofing membrane
Wet room coating mastic
2-component basement
2-component concrete
Flexible 1-component
Flexible 2-component
2-component water
protection systems
protection
Primer
tanks
Dispersions
Acronal® S 533 S / A-Dispersion Low emission, high pigment binding capacity, multi-purpose
n n binder
Acronal S 813
®
S / A-Dispersion Outstanding water resistance
Acronal® 5041 S / A-Dispersion Low VOC, good adhesion to different substrates, fast drying,
n n good water resistance
Acronal® A 508 S / A-Dispersion Excellent penetration and wetting properties to gypsum sub-
n strates, APEO-free
Acronal® S 400 S / A-Dispersion n n n Flexible, multi-purpose binder
Acronal® S 456 S / A-Dispersion n n n Flexible, multi-purpose binder, ammonia- and plasticizer-free
Acronal® N 137 Acrylic-Dispersion n n Low temperature elasticity down to -20 °C
Acronal® 5011 S / A-Dispersion n n n Flexible, ammonia-, APEO- and plasticizer-free
Acronal® 5311 S / A-Dispersion n Deep temperature flexibility and crack bridging, APEO-free
Acronal® 5044 S / A-Dispersion Self-crosslinking, ammonia- and APEO-free, outstanding crack-
n n n n bridging properties up to 2 mm
Acronal® S 430 P S / A-Powder Flexible, good crack-bridging properties, plasticizer-free
Acronal® P 5033 S / A-Powder High flexible crosslinked, plasticizer-, ammonia- and APEO-free
n good crack-bridging properties down to -10 °C
Styrofan® D 422 S / B-Dispersion Outstanding water-vapor barrier properties, high pigment binding
n capacity
Defoamers
Vinapor® DF 9010 F Fatty alcoholethoxylate / High and fast defoaming power for improved water resistance
Powder
n n n n n
FoamStar® PB 2922 Silicone free defoamer blend / Highly efficient defoaming for improved strength and bonding
(Dehydran® 1922) Powder
FoamStar® SI 2213 Silicone/polymer based mix / Highly efficient defoaming for improved strength and bonding
(Dehydran® 1513) Liquid
n n n n n
FoamStar® SI 2210 Modified polydimethyl- Highly efficient defoaming for improved strength and bonding
(Dehydran® 1620) siloxane / Liquid
FoamStar® ED 2522 Silicone emulsion / Liquid Highly efficient defoaming for improved strength and bonding
(Dehydran® SE2) with ultra low SVOC
FoamStar® PB 2706 Polyether derivate of fatty Highly efficient defoaming for improved strength and bonding
(Lumiten® EL) acid / Liquid
Dispersing Agents
Melflux® 5581 Polycarboxylic Ether / Powder Reduction of mixing time possible
Dispex® CX 4320 Sodium salt of carboxylic Highly efficient dispersing agent with low impact on water
(Pigment disperser® MD 20) acid copolymer / Liquid
n resistance
Dispex AA 4135
®
Sodium salt of polyacrylic Highly efficient dispersing agent with negative impact on water
(Pigment disperser® NL) acid / Liquid resistancy
Film-Forming Agents
Loxanol® CA 5308 Dicarbonic acid-diisobutyl B.p. >260 °C, water resistance, no labelling in accordance with
(Lusolvan® FBH) ester EU guideline
n = recommended = suitable
4 Construction materials
Flexible Flat Roof Coatings
Dispersing Agents
Dispex® CX 4320 Sodium salt of carboxylic acid Copolymer / Very efficient dispersing agent with low impact on water
(Pigment disperser® MD 20) Liquid
n resistance
Dispex® AA 4135 Sodium salt of polyacrylic acid / Liquid Highly efficient dispersing agent
(Pigment disperser® NL)
n n
Defoamers
FoamStar® PB 2706 Polyether derivate of fatty acid / Liquid Highly efficient defoaming for improved strength and bonding
(Lumiten® EL)
FoamStar® SI 2210 Modified polydimethylsiloxane / Liquid Highly efficient defoaming for improved strength and bonding
(Dehydran® 1620)
n n
n = recommended = suitable
Abbreviations
A= Pure Acrylic
(H)ASE = (Hydrophobically modified) Alkali-Soluble Emulsion
HH = Hemi-Hydrate
S/A = Styrene Acrylic
S/B = Styrene Butadiene
PU = Polyurethan
PP = Poly-Propylene
SLU = Self-Levelling Underlayment
VOC = Volatile Organic Compounds
Centers of Competence
Sag-Resistant Applications
Skim coats / Mono-
Masonry mortars
couche systems
Gypsum based
Cementitious
Cementitious
Prime coats
Tile grouts
1C Cem
2C Cem
D2-CTA
D1-CTA
Mastic
Dispersions
Acronal® S 533 S / A-Dispersion Very low emissions, multi-purpose
n n product, high pigment binding
capacities
Acronal® S 790 S / A-Dispersion n APEO-free, multi-purpose product
Acronal® 290 D S / A-Dispersion Multi-purpose product
Acronal® S 813 S / A-Dispersion n n Outstanding wet stability
Acronal® 5041 S / A-Dispersion Low emission and high wet
n n stability, fast curing without
coalescence
Acronal® DS 5011 S / A-Dispersion APEO-free, high flexibility
Acronal® DS 5018 S / A-Dispersion Slightly fluidising, predefoamed
n for easy floor applications
Redispersible Powders
Acronal® S 430 P S / A-Powder n For highly flexible S2-types
Workability Agents
Starvis® SE 25 F Starch Ether / Powder Little influence on consistency /
n n n n n n no retardation
Thickeners
Rheovis® AS 1130 Acrylic thickener (ASE) High yield point, high shear
(Viscalex® HV 30) dispersion thinning
Rheovis® S 1125 Acrylic thickener (ASE) Robust thickener, multi-purpose
(Latekoll® D) dispersion
n n n n use, lower water uptake
Dispersing Agents
Dispex® AA 4135 Sodium salt of poly- High efficiency
(Pigment disperser® NL) acrylic acid
n
Dispex® CX 4320 Sodium salt of car- High water resistance
(Pigment disperser® boxylic acid copolymer n n
MD 20)
Defoamers
FoamStar® PB 2706 Polyether derivate of Efficient and versatile
(Lumiten® EL) fatty acid / Liquid
n n n
FoamStar SI 2210
®
Modified polydimethyl- Outstanding efficiency, strong
(Dehydran® 1620) siloxane / Liquid
n spontaneous defoaming
n = recommended = suitable
6 Construction materials
Flowable Systems
Flowable Systems
Self-levelling underlayments
Self-levelling overlayments /
anhydrite / FGD anhydrite)
Flowable floor screeds
(natural anhydrite)
Machinery grouts
Industrial floors
(non-flowable)
Superplasticizers
Melflux® 2641 F Polycarboxylic Ether / Powder Long flow retention (open time), high early strength
development
Melflux® 2651 F Polycarboxylic Ether / Powder n n n n Allround product, high early strength development
Melflux® 4930 F Polycarboxylic Ether / Powder Fast dispersing effect, benefit for machine application
n n n n (short mixing)
Melflux® 5581 F Polycarboxylic Ether / Powder High early strength development in alpha hemi-hydrate
n n n n n binded systems
Melflux® 6681 F Polycarboxylic Ether / Powder Very fast dispersing effect, benefit for machine
n n application (very short mixing)
Melflux® AP 101 F Polycarboxylic Ether / Powder Without defoamer, very useful for cementitious grouts
n with low viscosity
Melflux® PP 100 F Polycarboxylic Ether / Powder Strong retardation, prolonged workability, preferrably
for fast setting cements
Melment® F 10 Melamine Condensate / Powder Allround product
Melment® F 10 G Melamine Condensate / Powder Optimised for gypsum
Melment® F 10 M Melamine Condensate / Powder Enhanced dispersing effect (dosage efficiency and
n water reduction)
Melment F 15
®
Melamine Condensate / Powder n n n Low formaldehyde content (reduced emission)
Melment® F 15 G Melamine Condensate / Powder Optimised for gypsum long open time,
n n n low formaldehyde content
Melment® F 17 G Melamine Condensate / Powder n n n Optimised for gypsum, lower formaldehyde content
Melment® F 217 G Melamine Condensate / Powder Optimised for gypsum, very low formaldehyde content
n (useful for EMICODE® EC-1)
Melment® F 245 Melamine Condensate / Powder Strongest dispersing effect (dosage efficiency and
n n n n n water reduction)
Melment® F 4000 Melamine Condensate / Powder Enhanced dispersing effect (dosage efficiency and
n water reduction)
Stabilizers
Starvis® 3003 F Synthetic Polymer / Powder Prevents bleeding and segregation, optimised for thin
layer systems
Starvis® 3070 F Synthetic Polymer / Powder Prevents bleeding and segregation, optimised for thin
n n n layer systems
Starvis® 4500 F Synthetic Polymer / Powder Prevents bleeding and segregation, optimised for thick
n n n n n layer systems
Defoamers
Vinapor® DF 9010 F Fatty alcohol alkoxylates and Very efficient defoaming effect, prevents air bubbles,
poly-siloxanes on inorganic n n n n n provides smooth surface (RAL ZU 113 conform)
carrier / Powder
FoamStar® PB 2938 Polyether derivative of fatty acid General purpose defoamer
(Lumiten® EP 3108) on inert carrier / Powder
FoamStar® PB 2922 Silicone free defoamer blend / General purpose defoamer, BFR XIV and RAL ZU 113
(Dehydran® 1922) Powder conform
FoamStar® PB 2941 Mineral oil on inorganic carrier / General purpose defoamer, RAL UZ 113 conform
(Foamaster® PD 1) Powder
n = recommended = suitable
Construction materials
Repair Systems 7
Repair Systems
compounds / Fine filler
Bonding aid / Primer
Repair mortar CC
Mortar bonding
Reinforcement
Smoothening
protection
emulsion
Dispersions
Acronal® S 533 S / A-Liquid Low VOC, multi-purpose use
Acronal® DS 5018 S / A-Liquid n n High bonding strength, high wetting properties
Acronal® DS 5041 S / A-Liquid n Fast curing properties
Styrofan® D 623 S / B-Liquid n Highly flexible applications
Styrofan® D 820 S / B-Liquid n Highly strength applications
Redispersible Powders
Acronal® S 735 P S / A-Powder n n n Vertical / wall applications
Acronal® S 734 P S / A-Powder n n n n Horizontal / floor applications, defoamed
Acronal® S 629 P S / A-Powder n n n Overhead applications, rheology modified
Acronal® S 695 P S / A-Powder Multi-purpose product, neutral
Superplasticizers / Wetting Agents
Melflux® 4930 F Polycarboxylic Ether / Powder n n n Water reducer, higher system strength
Melment® F 10 Melamine-Condensate / Wetting aid, improved bonding
Powder
n n
Rheology Modifiers
Rheovis® HS 1980 Synthetical Polymer / Powder Thixotropic thickening of system
(Starvis® T 180 F)
n
Starvis® T 50 F Synthetical Polymer / Powder Thickening of system
Starvis® T 51 F Synthetical Polymer / Powder n Thickening of system with improved mixing properties
Starvis® S 3911 F Waterswellable Polymer n n n Optimised crack formation, improved hydration control
Defoamers
Vinapor® DF 9010 F Fatty alcohol alkoxylates and Highly efficient defoaming for improved strength and
poly-siloxanes on inorganic n n bonding
carrier / Powder
FoamStar® PB 2706 Liquid Fatty Acid For two-component applications
(Lumiten® EL)
n n n
n = recommended = suitable
= registered trademark of BASF
®
The information in this leaflet is based on our current knowledge and experience. It does not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing
and application of our products, does not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on
the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication are subject to change without prior notice. It is the responsibility of
the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed (02/2013).