Professional Documents
Culture Documents
TROUBLESHOOTING
(L-7+L-8)
LAB TASK 3
NAME- KARTIK SHARMA
REG. NO.-18BEC0140
A)
a) CIRCUIT DIAGRAM:
OUTPUT: (GREEN)
b) CIRCUIT DIAGRAM-
OUTPUT:
CIRCUIT DIAGRAM-
OUTPUT-
1) VOLTAGE ACROSS DIODE-
OUTPUT-(RED)
2)10V on positive side-
CIRCUIT DIAGRAM:
OUTPUT-(GREEN)
TASK-3(B)
CIRCUIT DIAGRAM-
OUTPUT-(RED) Here we just check the functionality of the gate, where logic 0
is considered at 0Vand logic 1 considered at 5V;
RESULT-
For the output of the logic gate to be 1 wherein A=1 and B=1 i.e 5V the
diode output is 5+0.7=5.7 V because of built in voltage of the diode and
similarly for 0 logic output from the gate the diode shows 0-0.7=-0.7V
.The output in red gives OR logic i.e output is low when both input are
low and output is high if all or any one input is high. When the diode is
reverse biased it acts as an open switch and does not conduct while in
forward bias it acts as an closed switch and propagates logic 1.
B) AND GATE USING DIODES-
CIRCUIT DIAGRAM-
OUTPUT-(RED) Here we just check the functionality of the gate, where
logic 0 is considered at 0Vand logic 1 considered at 5V;
RESULT-
For gate output to be 1 i.e. when A=1 and B=1 the diode output is
5+0.7=5.7 V because of built in voltage and similarly for logic 0 the diode
shows 0-0.7=-0.7V for logic zero The output in red gives AND logic i.e.
output is high when both input are high and output is low if all or even
one input is low.