Professional Documents
Culture Documents
Issue: 07.09
0 0
1 Description
S can be used with all types of lift valves
S the switch is screwed directly into the
appropriate port and constantly senses the
cylinder pressure
S is connected as normally open
S can also be connected as a change−over
switch
S used for monitoring of minimum static
pressure
S can also be used as a slack−rope switch
Caution
Oil under high pressure
Can cause serious injuries
Before fitting the pressure switch, make sure that all pressure in the lift
control valve has been vented.
3 Technical data
4 Dimensions
~50 before tightening
~50
Pg 9
A/F 27
9
5 Connecting Cable
The connecting cable is used to connect the pressure switch to the
elevator control system.
5.1 Dimensions
A B A
40 mm L 40 mm
5.2 Diagram
4 Connected as normally open:
terminals À .. Ã
2 4 D white
P
E brown
1
info.nh@bucherhydraulics.com www.bucherhydraulics.com
E 2009 by Bucher Hydraulics AG, CH−6345 Neuheim.
All rights reserved.
Data is provided for the purpose of product description only, and must not be considered as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.