Professional Documents
Culture Documents
Circular formwork H20 is a practical circular formwork system that delivers smooth, curved walls from radii of
3.50 m upward – steplessly.
The system reduces the rental and wage costs at your Efficient construction workflow, as
site because there is only one connecting device
it only needs a small number of form-ties – just one (Adjustable clamp 10cm)
form-tie per 1.50 m² it can easily be combined with Framax Xlife,
only small commissioning quantities are needed, as it Alu-Framax Xlife and Column formwork RS
adapts effortlessly to any layout setting the radii is easy – simply by turning spindles
the system elements are pre-assembled and are readied radii are easy to check, using flexible templates
for use simply by setting the desired radius with the
adjusting spindles
The practical height grid and the systematic spacing of the form-ties
make it possible to form widely diff ering height-combinations quickly
and easily.
360
300
240
120
70
Optimum element size-grid with only two diff erent widths of element (inside element 2.40 m, outside element 2.50 m)
Art. no. 931412502 // 03/2013 en-GB
Doka GmbH | Josef Umdasch Platz 1 | 3300 Amstetten | Austria | T +43 7472 605-0 | F +43 7472 64430 | info@doka.com | www.doka.com