GMR638-2 Congratulations on your purchase of the Uniden
GMR638 Series (General Mobile Radio Service)
INSTALL THE BATTERY Note: The charge indicator LEDs will remain on as long as the radios are left in the charger. Choosing a CTCSS Code Each of the channels 1-22 may have any one of 3) Exit the Menu.
GMR638-2CK radio. This product is a lightweight, palm-sized
radio. Use it at sporting events to stay in contact Each GMR638 radio uses a NiMH battery pack (not included with GMR638-2) or 4 AAA alkaline batter- the codes, OFF or 1-38 selected. Code oF (OFF) indicates no CTCSS code selected and your radio To transmit the selected call tone, press the call key. The selected tone will automatically be
GMR638-3CK with family and friends, hiking, skiing, outdoors, or
in a neighborhood watch for vital communication. ies (not included). If you use alkaline batteries, we recommend high quality alkaline batteries. USING THE RADIO can receive a signal regardless of the code settings of the transmitting radio. transmitted for a fixed length of time. Call Tone will be cancelled when the PTT button is pressed. • 15 GMRS / 7 FRS Channels • Battery Charger This compact, state-of-the-art device is equipped In order to get the most out of your new radio, read this 1) Enter the Menu. The CTCSS code on the LCD Channel Scan Feature • 38 CTCSS Codes • Battery Level Meter with many features. To install the NiMH battery pack: reference guide completely before attempting to operate display will appear. Your GMR638 radio has a channel scan feature • Up to 6 Mile Range* • Channel Monitor the unit. 1) Make sure your radio is OFF. 2) Press the ▲ or ▼ key to increase or decrease that allows you to easily scan all 22 channels. • Internal VOX Circuitry • Channel Scan 2) Release the battery cover clip, then remove the Turning the Radio On and Adjusting the Volume the code number displayed. You can also select When an active channel is detected, the radio will • 5 Selectable Call Tone Alerts • Keypad Lock battery cover. 1) Press and hold the sel/ key to turn the radio ON, oF (OFF) at this stage. pause on that channel until the channel is clear. • Backlit LCD Display • Key Beep PACKAGE CONTENTS 3) Install the NiMH battery pack into the battery and increase the speaker volume by pressing the ▲ 3) Exit the Menu. Then after a 2 second delay, the radio will continue • Optional Headset Accessories key. To decrease the volume, press the ▼ key. scanning. Pressing the PTT button while the scan Depending on the model configuration, your compartment. Be certain to follow the instruction • Headset Jack 2) Press and hold the sel/ key again to turn the radio Talking on Your Radio is paused on a channel will allow you to transmit on package should include: written on the label on the battery pack. • Roger Beep OFF. To talk to others using the radio: that channel. Installing the battery pack incorrectly will prevent GMR638-2 1) Press and hold the PTT button and speak in a To turn ON channel scan: the unit from operating. Adjusting the Sound (Key Beeps) Two GMR638 Radios with Belt Clips clear, normal voice about 2-3 inches away from 4) Align the battery cover tabs with the GMR638 Your radio emits a beep each time one of the keys Press the scn key the scan... icon is displayed. GMR638-2CK tab holes then replace the cover clip. (except for the PTT button, and call key) is pressed. the microphone. While you are transmitting, the The channel number on the display will change as Two GMR638 Radios with Belt Clips To turn this sound OFF, press and hold the call key while icon will appear on the display. To avoid the radio rapidly cycles through the channels. Note: Always make sure your battery pack is fully turning ON the radio. Repeat this step to turn the sound ON. cutting off the first part of your transmission, One Dual Charging Cradle (RC6338) discharged before recharging to prolong the life of To turn OFF channel Scan: pause slightly after pressing the PTT button Two Rechargeable Batteries (BP38) the battery pack. The LED will illuminate while the Navigating through the Menu before you start talking. Press the sel/ , call key, and PTT button or press One AC Adapter (AD-0001) radio is in the charging cradle. To access the advanced features of the 2) When you have finished speaking, release the the scn key. GMR638-3CK GMR638, your radio has a Menu function. PTT button. You can now receive incoming calls. *Range may vary depending on environmental and/or topographical conditions. While receiving, the icon will appear on the Key Lock Three GMR638 Radios with Belt Clips display. To lock the keypad: GMR638 RADIO One Dual Charging Cradle (RC6338) BATTERY LEVEL AND Normal CTCSS VOX Level Call Tone Key Lock Normal 1) Enter the Menu. Advance through the Menu until One Single Charging Cradle (RC6488) LOW BATTERY ALERT Voice Operated Transmission the icon appears on the display. The current Three Rechargeable Batteries (BP38) Your GMR638 radio is equipped with a user Key Lock status oF (OFF) blinks on the display. Two AC Adapters (AD-0001) This unit has a battery level meter on the display to OFF, 1-38 OFF, 1-3 1-5 ON-OFF selectable Voice Operated Transmitter (VOX) that 2) To switch the Key Lock mode from oF (OFF) to indicate the status of the batteries. When the battery in the The following optional accessories may be can be used for automatic voice transmissions. The on, press the ▲ key. unit is low, the battery level meter icon will flash. 1) To enter the Menu, press the sel/ key. VOX feature is designed to be used with a headset 3) To confirm the setting, press the sel/ key. purchased by calling the Customer Hotline at Recharge the NiMH battery pack immediately or if you are 2) Additional presses of the sel/ key will advance with a microphone. Transmission is initiated by The radio returns to the "Normal" mode. 1-800-297-1023 (Mon-Fri 7 am to 7 pm, using the alkaline batteries, you must replace the alkaline you through the Menu until exiting to "Normal" speaking into the remote microphone instead of Sat/Sun/holidays--except Thanksgiving and batteries in order to continue using the radio. Note: If you exit the setting mode before confirming operating mode. pushing the PTT button. Christmas--9 am to 5 pm, CST). your selection by pressing the sel/ key, the Key Warning! To avoid the risk of personal injury or property 3) Other methods of exiting the Menu function are: To select the VOX level: Lock setting will be set to oF (OFF). Use only Uniden accessories. damage from fire or electrical shock, only use the Uniden a. Press and hold the sel/ key again. accessories specifically designated for this product. b. Press the PTT button, mon, call, scn, or ch key. 1) Enter the Menu. Advance through the Menu until • NiMH Battery Pack - #BP38 the vox icon appears on the display. The current To unlock the keypad: c. Wait 10 seconds until the unit automatically returns to • Charging Cradle - #RC6338 or RC6488 “Normal” mode. level (OFF, 1-3) will be indicated. Level oF (OFF) 1) Press and hold the sel/ key to turn the radio disables VOX, while levels - set the OFF. • Headset - #HS2467 sensitivity of the VOX circuit. 2) Press and hold the sel/ key again to turn the USING THE CHARGING CRADLE Choosing a Channel • AC Adapter (AD-0001) 2) Press either the ▲ or ▼ key to the desired VOX radio ON. The keypad is unlocked. Your radio has 22 channels and 38 CTCSS codes sensitivity level. Use level 1 for increased You can use a charging cradle to recharge the BP38 you can use to talk to others. In order to speak to sensitivity to voice in normally quiet Automatic Power Save Feature batteries in your GMR638. someone, each of you must set to the same environments, and use a higher level to reduce GMR638-2CK and GMR638-3CK includes charging Your GMR638 radio has a unique circuit designed GMRS LICENSE channel and CTCSS code. undesired activation in very noisy environments. cradle(s). Follow these to dramatically extend the life of the batteries. If instructions to recharge the radios in a charging To choose a channel: 3) Exit the Menu. there is no transmission nor an incoming call within The GMR638 radio operates on the General cradle. With the radio in "Normal" operating mode press the ch 3 seconds, your radio switches to the Power Save 1 Antenna 13 Battery Level Meter 2 PTT (Push-To-Talk) Button 14 Receive Indicator Mobile Radio Service (GMRS) frequencies when Make sure to turn the radio OFF before placing key and press the ▲ or ▼ key to increase or decrease Transmitting a Call Tone mode. The radio is still able to receive transmis- 3 Monitor Key 15 Call Indicator using Channels 1-7 and channels 15-22. You the radio in the charging cradle. Otherwise the the channel number displayed. Your GMR638 radio is equipped with 5 selectable sions in this mode. 4 Call Key 16 Scan Indicator must have a GMRS license issued by the Federal battery level meter icon won’t indicate properly. call tones that will be transmitted when the call key 5 Scan Key 17 Channel Indicator Communications Commission to legally use Note: FRS channels 8-14 have an expectancy is pressed. LCD Backlight 6 Channel Key 18 Transmit Indicator 1) Connect the AC adapter (# AD-0001) to DC IN range of up to 2 miles. GMRS channels 1-7, 15-22 7 Speaker 19 Volume Setting Indicator these channels. For licensing information and To select a call tone: The LCD Backlight will automatically turn ON when 9V jack and to a standard 120V AC wall outlet. have an expectancy range of up to 6 miles. any key (except the PTT button is pressed. The 8 Headset Jack 20 VOX Indicator application forms, visit the FCC online at: 1) Enter the Menu. Advance through the Menu until 2) Set the charging cradle on the desk or tabletop, You can know which GMRS or FRS channel is LCD display will illuminate for 10 seconds before 9 On/Off/Select Key 21 GMRS/FRS Indicator www.fcc.gov/wtb/uls or call the FCC hotline at the call icon is shown on the display. The current 10 Volume Up (Default)/ 22 Keypad Lock Indicator and place the radio in the charging cradle with active by the icon. The icon indicates GMRS turning OFF. 1-800-418-3676. If you have any questions, you channel, and the icon indicates FRS channel. call tone number ( - ) will be indicated. Channel Up Key 23 CTCSS Indicator the keypad facing forward. 11 Volume Down (Default)/ 24 Charging LEDs can contact the FCC direct at 1-888-225-5322. 3) Make sure that the LED illuminates. Charge the 2) Press the ▲ or ▼ key to increase or decrease Channel Down Key 25 Charging Contacts No license is required for operation on channels battery pack for 16 hours and remove the radio the number to the desired call tone. Each tone 12 Microphone 8-14 or operation on any channel in Canada. from the charging cradle after charge. will be heard through the speaker.
Downloaded from www.Manualslib.com manuals search engine