Professional Documents
Culture Documents
Proprietary Notice:
This document and the information contained in it is proprietary and confidential information of Philips Healthcare
("Philips") and may not be reproduced, copied in whole or in part, adapted, modified, disclosed to others, or
disseminated without the prior written permission of the Philips Legal Department. Use of this document and the
information contained in it is strictly reserved for current Philips personnel and Philips customers who have a
current and valid license from Philips for use by the customer’s designated in-house service employee on
equipment located at the customer’s designated site. Use of this document by unauthorized persons is strictly
prohibited. Report violation of these requirements to the Philips Legal Department. This document must be
returned to Philips when the user is no longer licensed and in any event upon Philips’ first written request.
CSIP Level 1:
This document or digital media and the information contained in it is strictly reserved for current Philips
Healthcare (“Philips”) personnel, Philips licensed representatives and Philips customers who have purchased a
valid service agreement for use by the customer’s designated in-house service employee on equipment located at
the customer’s designated site. Use of this document or digital media by unauthorized persons is strictly
prohibited. This document or digital media must be returned to Philips when the user is no longer licensed and in
any event upon Philips’ first written request.
1
Objectives
When you have successfully completed this lab, you will be able to:
Use the Access CT Network Installation and Configuration manual to configure the Access
CT console to network with DICOM Workstation.
Send images from Access CT to DICOM Workstation for viewing
Prerequisite Lessons
Console Lecture
Tools/Reference Materials
Access CT Network Installation and Configuration
Time
1 hours
Introduction
FSE needs to learn how to configure Access CT networking and how to configure DICOM nodes.
Procedure Preview
In this lab exercise, the learner will,
Configure Access CT console TCP/IP networking
Configure Access CT DICOM nodes
Send Access CT DICOM images to another DICOM node
2
Special Instructions/Precautions
<CAUTION:
Read and understand the Access CT Network installation and Configuration document before
proceed with the lab. If you are unsure, please seek help from the instructor.>
Instructions
1. Use the Access CT Network Installation and Configuration manual to configure training
Access CT scanner networking to the training EBW/PACS/Other DICOM CT scanner.
2. Ask your instructor for the necessary information needed for networking the scanner. (IP
address, Network Mask, AE Title, DICOM port number … etc.)
3. Try to send images from training Access CT scanner to training EBW/PACS/Other DICOM
scanner.
4. Show the instructor that the images was sent successfully.
Question:
What is the AE Title? Is it necessary to be unique for different workstations/systems?
What are troubleshooting steps if you have problem connecting other systems?
__________________________________________________________________________
3
5. Troubleshooting
a. Bug 1
i. Disconnect the hospital network cable.
ii. Try to send images to another DICOM node.
Question:
Is there any error message when trying to send DICOM images to another
DICOM node?
Question:
Does the system log tells you anything about the networking problem? If yes,
what is the message shows in the system log?
—End of Lab—
4
Additional Information
<For further information about the topic, read/do….>
Revision History