Professional Documents
Culture Documents
IRRIGATION EQUIPMENT
CATALOGUE
METRIC
www.antelco.com
PUTTING WATER WHERE IT COUNTS!®
NEW PRODUCTS
Rotor Rain® Plus Mini Sprinklers Page 27
Antelco is committed to product development and improvement so specications may change without notice
and without incurring liability.
© All photographs and drawings used in the Antelco catalogue are the property of Antelco Pty Ltd and are
protected by Copyright. Reproduction in whole or part, in any form of medium, without written approval from
Antelco Pty Ltd is prohibited.
TM ® Trademarks and Registered Trademarks, where indicated, are owned by Antelco Pty Ltd.
CONTENTS
Shrubbler® 360° & 180° Adjustable Flow 1
Potstream® Adjustable Flow 2
Mini Bubbler 360° Adjustable Flow 3
DRIPPERS
Agri Drip™ Classic Drippers 4
Midi Drip™ Drippers 5
Asta® Drip Pressure Compensating - Spike Drippers 6
CETA® Pressure Compensating Drippers 7
Shrubbler® 360° Pressure Compensating 9
Pinch Drip™ Pressure Compensating 10
Agri Drip™ Pressure Compensating Drippers 11
Dripper Selection Guide 12
SPRAYS
Micro Spray Jets: Caps and Bases 15
Micro Spray Jets: Assembled 16
Micro Spray Stake Assemblies 17
Vari-Jets™ 18
CFa AgSpray™ 19
CFd® Downspray 20
Frame Jets™ 21
SPRINKLERS
Rotor Spray™ Mini Sprinklers 23
Rotor Rain® Mini Sprinklers 25
Rotor Rain® Plus Mini Sprinklers 27
Rotor Max™ Midi Sprinklers 29
Rotor Max™ Deector 30
ReuZit® Recycled Water Products 31
VALVES
Valves 33
eZyvalve™4 35
Pressure Regulators 36
Micro Fittings 37
Take-Off Fittings 39
Xpando® Take-Off Fittings & Grommets 40
Xpando® Take-Off Director 41
Directors, End Plugs & Saddles 42
Joiners and Elbows 43
FITTINGS
Tees 44
Double Barb “DB” Fittings™ 45
Super Tough “ST” Fittings™ 47
Ratchet Clamps 48
Asta® Stakes and Rigid Risers 49
Micro Stakes 50
Hold Down Stakes 51
Mini Sprinkler Stakes 52
Tap Fittings 53
Filters 54
ACCESSORIES
Installation Tools 55
Installation Guidelines 56
Shrubbler® 360o & 180o Adjustable Flow
The original Shrubbler® with ow adjustment. Flow and coverage can be
altered by rotating the cap.
Features
Ÿ Fingertip ow control with shut-off option.
®
Ÿ Spike models anchor Shrubbler at the plant.
Ÿ Spike models suit 4 mm ID micro tube.
Ÿ Barb model for direct attachment to micro and supply tubes.
®
Ÿ 4 mm threaded model for installation into Rigid Risers and Asta Stakes.
Ÿ 1/2" threaded model for riser pipe installations.
Applications
Pots, tubs, landscaped gardens and nurseries. Ideal for hanging baskets.
In-Line Spike model suitable for planter boxes.
100 kPa
30
ADJUSTABLE
20
10
Shrubbler®
Thread 4 mm 0 2 4 6 8 10 12 14 16 18 20 22
Number of Clicks
Features
Ÿ Variable ow rate and pattern size suits pot diameters
of 200 mm and upwards.
Ÿ Suits pot wall thickness up to 40 mm.
Ÿ Side mounted installation for neat location of the supply tube.
Ÿ Low application rate and gentle stream pattern.
Ÿ Easily adjustable knob for varying spray patterns.
Applications
Potted plants, planter boxes and containers.
Performance Chart
®
Pressure (kPa) Flow (lph) Radius (mm)
50 0 - 16 0 - 235
DRIPPERS
100 0 - 22 0 - 245
150 0 - 27 0 - 260
200 0 - 31 0 - 280
250 0 - 36 0 - 300
300 0 - 39 0 - 330
Specications
ADJUSTABLE
Dimensions Assembled UV Stabilised Material Colour Base/Connection Type
HEIGHT 220 mm STAKE polypropylene STAKE Black
WIDTH 22 mm KNOB HDPE KNOB Black Inlet BARB 4.5 mm
DEPTH 75 mm
WEIGHT (approx.) 11 g
Typical System
Key:
A - Pressure Regulator G - Potstream®
B - Nut & Tail H - Tee
C - Filter I - End Sleeve
D - Elbow J - 13 mm Supply Tube
E - Take-off/Joiner K - 4 mm Micro Tube
F - Tidy Bow™ Elbow
G
I K A
B
F
C
E
J D
H
Features
Ÿ Fingertip ow control with shut-off option.
Ÿ Spike model to anchor Mini Bubbler at the plant.
Ÿ Barb model for direct attachment to micro and supply tubing.
®
Ÿ 4 mm threaded model for installation into Rigid Risers and Asta Stakes.
Ÿ 1/2" threaded model for riser pipe installations.
Applications
Street trees and shrubs. Higher ow rates allow for short watering times.
Flow Rate
140
200 kPa
120 150 kPa
100 100 kPa
Flow (lph)
80
60
40
ADJUSTABLE
20
0 2 4 6 8 10 12 14 16 18 20 22
Number of Clicks
Diameter of Throw
Mini Bubbler
Spike 0.6
Inlet 4 mm 0.5 200 kPa
Diameter (m)
0.4
0.3 150 kPa
0.1
0
10 12 14 16 18 20 22
Mini Bubbler Number of Clicks
Barb 4 mm
Ordering Information - Mini Bubbler
Order Pack Packs Per Carton
Base Type
Code Quantity Carton (kg)
Barb 4 mm 31745 100 65 11.0
Thread 4 mm 31715 100 65 13.8
Thread 1/2" FNPT 31725 25 70 8.2
Mini Bubbler Spike 31795 25 40 6.3
Thread 4 mm
Specications - Shrubbler® & Mini Bubbler
Dimensions Assembled Barb Thread Thread 1/2" Spike
HEIGHT 23 mm 23 mm 34 mm 135 mm
WIDTH 20 mm 20 mm 26 mm 42 mm
DEPTH 16 mm 16 mm 26 mm 16 mm
WEIGHT (approx.) 1.6 g 2.0 g 4.3 g 5.4 g
UV STABILISED BASE polypropylene acetal polypropylene polypropylene
MATERIAL CAP polypropylene polypropylene polypropylene polypropylene
Mini Bubbler 10-32 UNF THREAD
BASE/CONNECTION TYPE: Inlet BARB 4 mm BARB 4 mm
Thread 1/2" Female THREAD 4 mm 1/2" FNPT
Features
Ÿ Colour coded bases for easy identication: 2 lph (Red), 4 lph (Black) &
8 lph (Green).
Ÿ Positive barb connection to suit 4 mm ID micro tube or direct
connection to supply tubing.
Ÿ Constructed of UV stabilised plastic for long life.
Applications
Economical dripper for landscape, horticultural tree and row crops and
vineyards.
Performance Chart
Flow Rate (lph)
Pressure (kPa)
2 lph 4 lph 8 lph
50 1.4 3.0 6.0
DRIPPERS
75 1.7 3.6 7.4
100 2.0 4.1 8.4
125 2.2 4.6 9.3
150 2.4 5.0 10.2
MINIMUM FLOW PATH DIMENSION (mm) 0.9 x 0.7 1.3 x 0.8 1.8 x 1.1
Flow Rate
Agri DripTM Classic 16
2 lph 8 lph
14
FIXED FLOW
12
10
Flow (lph)
8 4 lph
6
4 2 lph
Features
Ÿ Take apart for easy inspection and cleaning.
Ÿ Barb model for direct insertion into tubing.
Ÿ Spike model to anchor Midi Drip™ at the plant.
Applications
Shrubs and owers, fruit trees, vines and tomatoes in a wide range of
situations from home gardens to large scale nurseries.
Performance Chart
Pressure (kPa) Flow (lph)
50 2.6
75 3.2
DRIPPERS
100 4.0
125 4.6
150 5.2
MINIMUM FLOW PATH DIMENSION (mm) 0.5 x 0.6
Flow Rate
8
7
6
FIXED FLOW
Flow (lph)
5
4
3
2
1
Midi DripTM
Spike 4 mm
Ordering Information - Midi DripTM
Order Pack Packs Per Carton
Base Type
Code Quantity Carton (kg)
Barb 4 mm 30145 100 80 12.7
Spike 4 mm 30195 25 50 6.4
Midi DripTM
Barb 4 mm
Specications
Features
Ÿ Three colour-coded ow rates: 2 lph (Red), 4 lph (Black) & 8 lph (Green).
Ÿ Turbulent ow path & self-ushing cleaning action at low pressure.
Ÿ Outlet includes insect bafe to minimise blockages.
Ÿ Inlet barb has built-in lter.
Ÿ UV stabilised materials for long life.
Ÿ Self-ushing cleaning action at low pressures.
Applications
Nurseries, shade houses, tree lots and landscape applications.
Performance Chart
Flow Rate (lph)
Pressure (kPa)
2 lph 4 lph 8 lph
50 2.0 3.6 5.8
DRIPPERS
100 2.3 4.3 7.8
150 2.3 4.4 8.0
200 2.3 4.6 8.2
250 2.3 4.7 8.3
300 2.3 4.7 8.2
350 2.2 4.6 8.0
MINIMUM FLOW PATH DIMENSION (mm) 0.7 x 0.6 0.8 x 0.8 1.2 x 0.9
Flow Rate
9
PRESSURE COMPENSATING
8 lph
8
7
6
Flow (lph)
®
Asta Drip PC
5 4 lph
2 lph Spike
4
3
2 lph
2
Specications
Dimensions Assembled UV Stabilised Material Base/Connection Type
HEIGHT 144 mm SPIKE polypropylene Inlet BARB 4 mm
WIDTH 33 mm BASE polypropylene Outlet SPOUT 4 mm
®
Asta Drip PC DEPTH 17 mm DIAPHRAGM silicone rubber
8 lph Spike WEIGHT (approx) 4.5 g
Features
Ÿ Take apart for easy inspection and cleaning.
Ÿ Self-ushing cleaning action at low pressure.
Ÿ Outlet includes anti-insect bafe to reduce risk of blockages.
Ÿ 4 mm barbed dripper range with colour coded bases for easy identication
2 lph (Red), 4 lph (Black) & 8 lph (Green).
Ÿ 4 mm barbed range available with 4 mm barbed outlet options.
®
Ÿ 4 lph PC Spike & In-Line Spike models to anchor CETA at the plant root.
Ÿ Constructed of high quality UV, chemical & fertiliser resistant materials.
Applications
Pots, planter boxes, balcony, patios and landscape.
Performance Chart
Flow (lph)
Pressure (kPa)
2 lph 4 lph 8 lph
50 1.9 3.3 6.2
DRIPPERS
Specications
CETA PC® CETA® PC with 4 mm barb CETA® PC Spike/
Dimensions Assembled
4 lph outlet In-Line Spike
Barb 4 mm HEIGHT 35 mm 135 mm
Outlet 4 mm WIDTH 20 mm 36 mm / 42 mm
DEPTH 16 mm 16 mm
WEIGHT (approx.) 2.0 g 5.0 g
BASE/SPIKE polypropylene polypropylene
UV STABILISED CAP polypropylene polypropylene
MATERIAL DIAPHRAGM silicone rubber silicone rubber
®
CETA PC ADAPTOR acetal
8 lph
CONNECTION TYPE: Inlet BARB 4 mm BARB 4 mm
Barb 4 mm
Outlet 4 mm Outlet BARB 4 mm SPOUT 4 mm
Features
Ÿ Low manufacturing coefcient of variation (Cv) provides high performance
(conforms to ISO 9261).
Ÿ Three colour coded ow rates: 2 lph (Red), 4 lph (Black) & 8 lph (Green).
Ÿ Self-ushing cleaning action at low pressures.
Ÿ Large clog resistant turbulent ow path.
®
Ÿ The CETA dripper is able to be taken apart for inspection and cleaning.
Ÿ Anti-insect bafe to deter insect entry.
Ÿ Constructed of high quality UV, chemical & fertiliser resistant materials.
Applications
Vineyards, orchards, row crops and landscape.
Performance Chart
Flow (lph)
Pressure (kPa)
2 lph 4 lph 8 lph
50 1.9 3.3 6.2
DRIPPERS
100 2.0 3.8 7.9
150 2.2 4.2 7.9
200 2.3 4.4 8.1
250 2.3 4.4 8.1
300 2.3 4.4 8.0
350 2.2 4.3 7.8
MINIMUM FLOW PATH DIMENSION (mm) 0.7 x 0.6 0.8 x 0.8 1.2 x 0.9
CETA® PC
2 lph Flow Rate
Barb 4 mm 9
PRESSURE COMPENSATING
8 8 lph
7
6
Flow (lph)
5
4 lph
4
3
2 lph
2
1
CETA® PC
4 lph Ordering Information - CETA® PC Barb
Barb 4 mm
Order Pack Packs Per Carton
Flow
Code Quantity Carton (kg)
2 lph 30425 100 70 13.3
4 lph 30445 100 70 13.3
8 lph 30485 100 70 13.3
Specications
HEIGHT 25 mm
WIDTH 20 mm
DEPTH 16 mm
CETA® PC
8 lph WEIGHT (approx.) 1.7 g
Barb 4 mm BASE polypropylene
UV STABILISED
CAP polypropylene
MATERIAL
DIAPHRAGM silicone rubber
CONNECTION TYPE: Inlet BARB 4 mm
Outlet SPOUT 4 mm
Features
Ÿ Pressure compensating operation maintains diameter of throw over a
wide range of inlet pressures.
Ÿ Take apart for easy inspection and cleaning.
Ÿ Coloured cap for easy identication.
Ÿ UV stabilised materials for long life.
Ÿ Resistant to common agricultural chemicals & fertilisers.
Ÿ Patented design.
Applications
Pots, planter boxes, balcony, patio and landscape.
Performance Chart
360o
Pressure (kPa)
DRIPPERS
Flow Rate
50
40
PRESSURE COMPENSATING
Flow (lph)
30
20
10
Specications
Dimensions Assembled Barb Spike
Shrubbler® 360o PC HEIGHT 25 mm 135 mm
Barb 4 mm WIDTH 20 mm 16 mm
DIAMETER 15 mm 26 mm
WEIGHT (approx.) 1.7 g 5.4 g
BASE polypropylene polypropylene
UV STABILISED
CAP polypropylene polypropylene
MATERIAL
DIAPHRAGM silicone rubber silicone rubber
BASE/CONNECTION TYPE: Inlet BARB 4 mm BARB 4 mm
Features
Ÿ Low manufacturing coefcient of variation (Cv) to provide high
performance (conforms to ISO 9261).
Ÿ Three colour coded ow rates: 2 lph (Red), 4 lph (Black) & 8 lph (Green).
Ÿ Self-ushing cleaning action at low pressures.
Ÿ Insect bafe to reduce risk of blockages.
Ÿ Inlet barb has built-in lter.
Ÿ UV stabilised materials for long life.
Ÿ Resistant to common agricultural chemicals & fertilisers.
Applications
Vineyards, orchards, row crops and landscape.
Performance Chart
Flow (lph)
Pressure (kPa)
2 lph 4 lph 8 lph
DRIPPERS
50 2.1 3.4 5.7
100 2.3 4.1 7.2
150 2.3 4.4 7.4
200 2.4 4.6 7.6
250 2.4 4.6 7.7
300 2.3 4.6 7.5
350 2.2 4.5 7.3
MINIMUM FLOW PATH DIMENSION (mm) 0.7 x 0.6 0.8 x 0.8 1.2 x 0.9
PRESSURE COMPENSATING
8
8 lph
7
6
Flow (lph)
5
4 lph
4
3
2 lph
2
1
Pinch DripTM
PC 4 lph Ordering Information - Pinch DripTM PC
Barb 4 mm
Order Pack Packs per Carton
Description
Code Quantity Carton (kg)
2 lph 30705 100 85 10.1
4 lph 30715 100 85 10.1
8 lph 30725 100 85 10.1
Pinch DripTM
PC 8 lph Specications
Barb 4 mm
Dimensions Assembled UV Stabilised Material Base/Connection Type
HEIGHT 25 mm CAP polypropylene Inlet BARB 4 mm
WIDTH 28 mm BASE polypropylene Outlet SPOUT 4 mm
DEPTH 15 mm DIAPHRAGM silicone rubber
WEIGHT (approx.) 1.1g
Features
Ÿ Three models: 2 lph, 4 lph & 8 lph.
Ÿ Positive barb connection to suit 4 mm ID tube or connect directly to
supply tubing.
Ÿ UV stabilised materials for long life.
Ÿ Resistant to common agricultural chemicals & fertilisers.
Applications
Horticultural tree and row crops, vineyards and landscape.
Performance Chart
Flow (lph)
Pressure (kPa)
2 lph 4 lph 8 lph
DRIPPERS
8 lph
8
7
6
Flow (lph)
5
4 lph
4
3
2 2 lph
Type Brand
Nominal Garden Native Shrubs Pots / Self Insect
Cleanable Anchored Tanks
DRIPPERS
Flow Rate Beds Gardens Trees Planters Flushing Baffle
0 - 33
Shrubbler
lph
0 - 22
Adjustable Potstream
lph
Mini 0 - 100
Bubbler lph
2 lph
Agri Drip
Fixed 4 lph
Classic
8 lph
2 lph
CETA 4 lph
8 lph
2 lph
Pressure
Pinch 4 lph
Compensating
8 lph
2 lph
Asta PC
4 lph
Spike
8 lph
Features
Ÿ Finger tip ow control with shut-off option.
Ÿ Spike model to anchor Spectrum™ at the plant.
Ÿ 4 mm barb model for direct attachment to micro or supply tubing.
®
Ÿ 4 mm thread for installation into Rigid Risers and Asta Stakes or Micro
Stakes.
Ÿ 1/2” thread for riser pipe installations.
Applications
Pots, tubs, ground cover, landscaped gardens and nurseries. Waters large
garden areas when used with Asta® Stakes and Risers.
100 64 2.8
150 78 3.6
200 90 4.0
Flow Rate
100
200 kPa
80 150 kPa
Flow (lph)
100 kPa
60
40
20
0 2 4 6 8 10 12 14 16 18 20 22
Number of Clicks
Diameter of Throw
SpectrumTM
Spike 4 200 kPa
Inlet 4 mm 150 kPa
Diameter (m)
3
100 kPa
2
0
10 12 14 16 18 20 22
Number of Clicks
SpectrumTM
Barb 4 mm Ordering Information - SpectrumTM 360o
Order Pack Packs Per Carton
Base Type
Code Quantity Carton (kg)
Barb 4 mm 32045 50 100 11.8
Thread 4 mm 32015 50 100 13.8
Thread 1/2" Female 32025 25 65 9.1
Spike 32095 25 40 6.9
SpectrumTM Specications
Thread 4 mm
Dimensions Assembled Barb Thread Thread 1/2" Spike
HEIGHT 26 mm 26 mm 37 mm 137 mm
WIDTH 20 mm 20 mm 26 mm 42 mm
DEPTH 16 mm 16 mm 26 mm 16 mm
WEIGHT (approx.) 1.7 g 2.1 g 4.9 g 5.5 g
BASE polypropylene acetal polypropylene polypropylene
UV STABILISED
CAP polypropylene polypropylene polypropylene polypropylene
MATERIAL
DEFLECTOR acetal acetal acetal acetal
Features
Ÿ Winged base with ‘Quick’ thread for easy installation.
Ÿ No tools required.
Ÿ Choice of three spray patterns – 360°, 180°, 90°.
Ÿ Four colour coded ow rates.
Applications
Home and landscaped gardens and horticultural applications.
Accessories
Asta® Stake, Rigid Riser and Micro Stake.
Performance Chart
360o 180o 90o
Pattern
SPRAYS
Nozzle Size
Pressure (kPa) Flow (lph) Diameter (m) Radius (m)
& Colour
50 25 1.6 0.8 1.1
1.0 mm
100 35 2.0 1.0 1.4
Blue
150 43 2.4 1.2 1.7
50 48 2.0 1.0 1.3
1.5 mm
100 70 2.4 1.2 1.6
Green
150 88 2.8 1.5 1.9
50 62 2.4 1.2 1.6
1.7 mm
100 90 2.8 1.5 1.9
Single Piece Jet Black
Blue 90o 150 113 3.2 1.8 2.2
50 77 2.5 1.4 1.8
1.9 mm
100 110 3.0 1.7 2.1
Red
150 134 3.4 2.0 2.4
Specications
Single Piece Jet
Red 360o Dimensions UV Stabilised Material Base/Connection Type
HEIGHT 22 mm
WIDTH across wings 12 mm acetal Inlet ‘QUICK’ THREAD 4 mm
WEIGHT (approx.) 0.6 g
Features
Ÿ Caps available in eight spray patterns.
Ÿ Eight colour coded bases to identify ow rate.
Ÿ Jet assemblies made to order.
Ÿ Caps and bases can be ordered separately.
Applications
Assemblies suit garden bed watering and landscaped areas.
Accessories
Asta® Stake, Rigid Riser and Micro Stake.
10855
360o x 12 hole 10865 100 500 15.1
300o x 10 hole 10875 100 500 15.1
360o 360o 360o 300o
270o (3 x 90o) 10835 100 500 15.1
18 hole 15 hole 12 hole 10 hole
180o fan 10825 100 500 15.1
90o fan 10815 100 500 15.1
Strip (2 x 20o) 10885 100 500 15.1
Features
Ÿ Nine available spray patterns.
Ÿ Colour coded bases for ow identication.
Ÿ Caps feature a snap ring which rmly engages the base.
Ÿ UV stabilised materials for long life.
Applications
Landscape areas, home gardens, nurseries and horticultural applications.
Mist Jet ideal for greenhouse misting and hanging baskets. Strip Spray
ideal for narrow garden beds. Use stakes and risers to elevate spray jets.
Accessories
Asta® Stake, Rigid Riser and Micro Stake.
Minimum opening size 0.5 mm 0.6 mm 0.7 mm 0.7 mm 1.3 mm 1.4 mm 1.5 mm 1.5 mm 1.2 mm
SPRAYS
Size and Pressure Flow Diameter Radius Diameter
colour (kPa) (lph) (m) (m) (m)
50 15 2.6 2.2 2.6 1.2 2.4 2.4 1.1 1.2
100 22 4.1 3.2 3.2 3.2 3.6 4.2 1.7 1.5
0.8 mm
150 27 4.6 3.6 4.0 4.8 2.8 5.4 2.1 1.7
Black
200 32 5.0 4.2 4.6 6.0 2.7 6.0 2.3 1.7
250 36 5.3 4.8 5.0 7.0 2.7 6.4 2.6 1.8
50 20 2.9 2.8 2.8 2.2 2.6 2.6 1.2 1.3
100 28 4.0 3.8 3.4 4.0 3.4 4.6 1.8 1.6
0.9 mm
150 34 4.8 4.4 4.2 5.4 2.9 6.0 2.4 1.8
Brown
200 39 5.6 5.0 5.2 6.6 2.8 6.8 2.6 1.9
250 44 6.0 5.8 6.2 7.4 3.3 7.2 2.8 2.1
360o x 18 hole 180o fan 50 22 3.6 2.6 2.8 2.4 3.2 2.6 1.2 1.5
100 33 4.9 3.8 4.4 4.8 4.2 4.8 2.0 1.8
1.0 mm
150 42 5.8 4.8 5.2 7.0 3.2 5.6 2.4 2.0
Blue
200 49 6.2 6.2 6.8 8.6 3.2 5.8 2.8 2.1
250 56 6.4 7.0 8.4 9.0 3.4 5.8 2.8 2.3
50 36 4.7 4.2 3.2 3.0 3.5 3.8 1.4 1.5
100 54 6.4 5.8 5.0 5.6 3.5 5.8 2.2 2.0
1.3 mm
150 68 7.0 6.2 6.0 7.2 3.7 7.2 2.6 2.3
Green
200 80 7.2 7.8 7.0 8.0 3.7 8.4 2.0 2.5
250 91 7.6 8.8 8.4 8.4 3.8 9.6 3.1 2.7
50 52 4.9 4.4 4.0 4.4 3.0 4.9 1.5 1.9
100 75 6.8 6.0 6.2 5.4 3.8 6.5 2.4 2.4
1.5 mm
150 92 8.2 7.4 8.4 8.8 4.4 8.9 2.9 3.0
Red
200 107 8.2 8.8 10.0 10.4 4.8 10.8 3.1 3.2
250 120 7.2 10.0 11.4 11.2 5.1 11.2 3.3 3.4
50 64 5.0 4.6 4.6 4.2 3.6 5.0 1.7 1.7
90o fan Strip Spray 100 93 6.8 6.8 7.6 7.4 4.2 8.1 2.4 2.4
(2 x 20o) 1.8 mm
150 115 8.2 8.8 9.4 8.8 4.6 9.4 2.8 2.7
Orange
200 135 8.0 10.0 10.8 10.0 4.9 10.8 3.1 3.1
250 152 7.3 11.4 11.6 10.6 5.3 11.5 3.3 3.3
50 80 5.3 4.8 5.0 4.6 3.4 5.4 1.7 1.7
100 115 7.5 7.6 8.2 7.4 4.6 9.4 2.6 2.5
2.0 mm
150 140 8.1 9.6 10.2 9.2 5.1 12.0 3.1 3.1
Grey
200 165 7.8 11.0 12.0 10.6 5.6 13.2 3.3 3.3
250 185 6.7 12.4 13.0 11.8 6.2 13.8 3.5 3.6
50 113 5.2 4.4 6.0 4.0 3.6 5.4 1.9 2.0
100 163 7.1 8.0 9.2 6.8 5.4 9.0 3.0 2.8
2.3 mm
150 200 7.3 10.4 11.6 9.6 6.6 11.0 3.6 3.4
White
200 235 7.0 11.4 13.0 10.6 7.8 12.0 3.8 4.0
250 265 6.7 12.4 14.2 11.6 8.3 12.8 4.1 4.2
50 13 1.0
100 18 0.8
Mist Spray 360o x 18 hole 0.36 mm
150 22 0.9
Yellow
200 25 0.8
250 28 0.8
* Ghosted gures indicate a change of performance from spray to mist.
Features
Ÿ Choice of four spray patterns.
Ÿ Built-in hole punch.
Ÿ Vari-Jet™ Spike assembled with 300 mm offtake tube and 150 mm Rigid Riser.
Ÿ Vari-Jet™ Stake assemblies with 300 mm offtake tube on 300 mm stake.
Ÿ UV stabilised materials for long life.
Applications
Home and landscaped gardens.
Nozzle Size
Pressure (kPa) Flow (lph) Diameter (m) Radius (m)
& Colour
50 0 - 52 0 - 4.9 0 - 1.9 0 - 1.5
Vari-JetTM Spike 100 0 - 75 0 - 6.8 0 - 2.4 0 - 2.4
Red 150 0 - 92 0 - 8.2 0 - 3.0 0 - 2.9
max. 1.5 mm 200 0 - 107 0 - 8.2 0 - 3.2 0 - 3.1
250 0 - 120 0 - 7.2 0 - 3.4 0 - 3.3
* Ghosted gures indicate a change of performance from spray to mist.
Ordering Information - Winged Micro Spray Stake Assembly (refer page 16 for performance)
Vari-JetTM Spike
Spray Base Order Pack Packs per Carton
180o fan Cap Colour
Pattern Colour Code Quantity Carton (kg)
360o x 18 hole Blue Red 17425 25 19 12.4
180o fan Blue Blue 17435 25 19 12.4
90o fan Blue Black 17445 25 19 12.4
Strip Spray (2 x 20o) Blue Black 17455 25 19 12.4
Ordering Information - Vari-JetTM Stake Assembly (refer page 14 for performance data)
Spray Base Order Pack Packs per Carton
Cap Colour
Pattern Colour Code Quantity Carton (kg)
360o x 18 hole Black Black 17185 25 16 12.0
180o fan Black Black 17195 25 16 12.3
90o fan Black Black 17205 25 16 11.2
Specications
Winged Micro Spray Vari-JetTM
Dimensions Assembled Vari-JetTM Spike
Stake Assembly Stake Assembly
HEIGHT 355 mm 345 mm 360 mm
WIDTH 55 mm 24 mm 24 mm
WEIGHT (approx.) 32 g 26 g 28 g
SPIKE/STAKE polypropylene polypropylene polypropylene
ADAPTOR polypropylene acetal acetal
Winged Micro Spray UV RISER HDPE - -
Stake Assembly STABILISED
MATERIALS KNOB polypropylene - HDPE
OFF-TAKE TUBE PVC PVC PVC
Vari-JetTM
Stake Assembly BASE/CAP acetal acetal acetal
BASE/CONNECTION TYPE: Inlet BARB 4 mm BARB 4 mm BARB 4 mm
Features
Ÿ Choice of spray patterns - 360o, 180o and 90o and mist.
Ÿ Threaded for installation on Rigid Risers and Micro Stakes.
Ÿ UV stabilised materials for long life.
Applications
Home and landscaped gardens. Vari-Mist™ is ideal for adjustable
overhead watering of plants in hanging baskets.
Accessories
Asta® Stake, Rigid Riser and Micro Stake.
Performance Chart
Black Black Black Black
Cap Colour Options
Red Blue
360o x 18 Mist 180o 90o
SPRAYS
Pattern
Vari-JetTM
180o fan
10-32 UNF Thread 4 mm Specications
Dimensions Assembled UV Stabilised Material Base/Connection Type
HEIGHT 32 mm CAP acetal
WIDTH 22 mm BASE acetal Inlet 10-32 UNF THREAD 4 mm
WEIGHT (approx.) 2.3 g KNOB HDPE
Dimensions vary slightly depending on selected base and cap assembly
Features
Ÿ Colour coded for ow rate identication.
Ÿ 12 Stream Hi-Lo watering pattern (a).
Ÿ Robust proven C-Frame design.
Ÿ No moving parts.
Ÿ “Quick” thread inlet with sealing barb.
Applications
Specically designed for orchards and horticultural crops.
Accessories
Asta® Stake, Rigid Riser and Micro Stake.
Performance Chart
360o x 12 Streams - Hi Lo (a)
Pattern/ 26o High x 12.5o Low Trajectory
Trajectory
Tested at 0.2 m above ground
Nozzle Size Pressure Flow Diameter - (m) Hydraulic Flow Data
SPRAYS
& Colour (kPa) (lph) High Low Constant (k) Exponent (x)
50 16 2.6 2.0
100 22 3.5 2.8
0.8 mm
150 27 4.2 3.4 2.464 0.48
Black 200 31 4.8 3.9
250 35 5.3 4.4
50 20 3.1 2.3
100 28 4.1 3.1
CFa AgSprayTM Range 0.9 mm
150 35 4.8 3.8 2.589 0.52
Orange 200 41 5.3 4.4
250 46 5.8 4.9
50 24 3.4 2.4
100 33 4.2 3.4
1.0 mm
150 41 4.8 4.1 3.479 0.49
Blue 200 47 5.3 4.7
250 52 5.6 5.2
50 31 4.1 3.2
100 44 5.3 4.2
1.1 mm
150 54 6.0 4.9 4.196 0.51
Purple 200 63 6.6 5.5
Typical System
250 70 7.2 6.0
50 51 5.5 4.3
100 73 6.9 5.6
1.5 mm
150 90 7.9 6.5 6.634 0.52
Red 200 104 8.8 7.3
250 117 9.4 8.0
Ordering Information - CFa AgSprayTM on Micro Stake w/ 600mm Tube & Adaptor
Nozzle Size Order Pack Packs per Carton
& Colour Code Quantity Carton (kg)
0.8 mm 41605 25 5 6.9
0.9 mm 41675 25 5 6.9
1.0 mm 41615 25 5 6.9
1.1 mm 41665 25 5 6.9
1.5 mm 41655 25 5 6.9
Specications
Dimensions UV Stabilised Material Base/Connection Type
HEIGHT 34 mm
WIDTH 25 mm Inlet ‘QUICK’ THREAD
acetal
CFa AgSprayTM on Micro Stake DEPTH 8 mm with sealing barb 4 mm
with 600 mm Tube and Adaptor WEIGHT (approx.) 1.4 g
Features
Ÿ 45° downspray reduces the effect of wind.
Ÿ Gentle spray minimises damage to delicate plant foliage.
Ÿ Galvanised wire stake assembly incorporates shut-off clip to stop ow.
®
Ÿ Asta Stake assembly incorporates a hole punch for easy installation.
Ÿ Three colour coded frames to identify ow rates.
Ÿ Quick insertion thread with leak-proof design.
Ÿ UV stabilised materials.
Applications
Nurseries, tree lots, pot plants, home and landscaped gardens.
Performance Chart
360o
Pattern
SPRAYS
50 16 0.6
CFd® Downspray Range 0.8 mm
100 22 0.6
Black
150 27 0.5
50 20 0.6
0.9 mm
100 29 0.5
Brown
150 35 0.5
50 24 0.6
1.0 mm
100 34 0.5
Blue
150 41 0.5
Specications
CFd® Galvanised
Dimensions Assembled Cfd® Downspray Cfd® Stake Assembly
Wire Assembly
HEIGHT 34 mm 345 mm 360 mm
WIDTH 25 mm 24 mm 24 mm
DEPTH 8 mm
CFd® Downspray WEIGHT (approx.) 1.4 g 26 g 28 g
Wire Stake FRAME acetal acetal acetal
Assembly
UV STAKE ADAPTOR polypropylene acetal
with 914 mm Tube
& Adaptor STABILISED OFF-TAKE TUBE PEVA PVC
MATERIALS BARB ADAPTOR acetal acetal
Cfd® Downspray
STAKE galvanised steel polypropylene
Stake Assembly
with 300 mm Tube BASE/CONNECTION TYPE: ‘Quick’ THREAD with
Inlet BARB 4 mm BARB 4 mm
& Adaptor Sealing Barb 4 mm
Features
Ÿ Open frame and spray plate.
Ÿ No moving parts.
Ÿ Choice of 7 spray patterns and 8 ow rates.
Ÿ Colour coded nozzles for ow rate identication.
Ÿ ‘Quick’ thread for easy insertion into tubing, Rigid Risers or micro stakes.
Applications
Specically designed for orchards, vineyards and horticultural crops.
Accessories
Rigid Riser and Micro Stake.
Specications
Dimensions UV Stabilised Material Base/Connection Type
HEIGHT 32 mm FRAME acetal
Frame JetTM WIDTH 13 mm BASE acetal
Inlet ‘QUICK’ THREAD 4 mm
360o x 22 Pattern LENGTH 27 mm DEFLECTOR acetal
WEIGHT (approx.) 1.8 g
Typical System
Deector for
Micro Stake Frame JetTM
with 600 mm Tube and Adaptor
Trajectory 26o High 12.5o Low 22o 22o 12.5o 22o 12.5o 22o
Nozzle Size & Press Flow Order Diameter (m) Order Diameter Order Diameter Order Diameter Order Diameter Order Diameter (m) Order Diameter
Base Colour (kPa) (lph) Code High Low Code (m) Code (m) Code (m) Code (m) Code High Low Code (m)
100 84 7.8 6.0 8.6 7.8 5.7 7.2 6.1 4.9 8.2
1.55 mm
150 103 12155 9.6 6.9 12255 10.0 12355 8.9 12555 6.6 12655 8.7 12755 7.1 5.9 12855 9.7
Red
200 120 11.4 8.2 11.2 9.8 7.6 9.5 8.1 6.5 10.9
250 136 12.4 9.3 12.3 11.0 8.2 10.0 9.1 7.2 12.0
SPRAYS
22
Rotor SprayTM Mini Sprinklers
Durable and reliable with excellent distribution uniformity.
Vari-Rotor Spray™ can be adjusted to alter ow and coverage.
Features
Ÿ C-Frame design for strength and high distribution uniformity.
Ÿ Full ow ipper suspended between two bearings for reliable performance.
Ÿ Inverted model incorporates special khaki coloured ipper with dust cover
to protect bearing.
Ÿ Colour coded nozzles to identify ow rates.
®
Ÿ 4 mm thread for installing into Rigid Risers, Asta Stake Adaptor, Micro Stake
and 1/2” micro threaded adaptors.
Ÿ UV stabilised materials for long life.
Applications
Landscape areas, home gardens, nurseries and horticultural applications.
Inverted Rotor Spray™ ideal for overhead greenhouse and nursery watering.
Ordering Information - Rotor SprayTM Stake Assembly w/ 300 mm Tube & Barb Adaptor
Nozzle Size Order Pack Packs per Carton
Base Type
& Colour Code Quantity Carton (kg)
Inverted Rotor SprayTM 1.3 mm Green 4 mm 17245 25 13 14.0
4 mm Thread
Ordering Information - Vari-Rotor SprayTM Stake Assembly w/ 300 mm Tube & Barb Adaptor
Nozzle Size Order Pack Packs per Carton
Base Type
& Colour Code Quantity Carton (kg)
1.5 mm Black 4 mm 17295 25 13 10.0
Specications
Rotor SprayTM and
Dimensions Assembled Vari-Rotor SprayTM
Inverted Rotor SprayTM
HEIGHT 35 mm 45 mm
WIDTH 27 mm 27 mm
WEIGHT (approx.) 2.0 g 3.5 g
FRAME acetal acetal
UV BASE acetal acetal
STABILISED
MATERIALS FLIPPER nylon nylon
Vari-Rotor SprayTM
KNOB - HDPE
4 mm Thread
BASE/CONNECTION TYPE: Inlet 10-32 UNF THREAD 4 mm 10-32 UNF THREAD 4 mm
SPRINKLERS
Orange
200 135 8.4 0.5
100 120 6.8 0.4
2.0 mm
150 150 7.8 0.4
Grey
200 175 8.0 0.5
Vari-Rotor SprayTM
Stake Assembly
with 300 mm
Tube and Adaptor
Features
Ÿ C-Frame design for strength and high distribution uniformity.
Ÿ Full ow ipper suspended between two bearings for reliable performance.
Ÿ Colour coded nozzles to identify ow rates.
Ÿ Range extended to include three new low ow nozzle sizes.
Ÿ Break-off spray deector for close-in watering of immature trees.
Applications
Vines, row and tree crops such as nuts, citrus and apples.
Accessories
Rotor Stakes and adaptors.
Specications
Dimensions Assembled Rotor Rain® 3/8" Rotor Rain® 1/2"
HEIGHT 49 mm 49 mm
WIDTH 46 mm 46 mm
WEIGHT (approx.) 8g 10.5 g
UV FRAME acetal acetal
STABILISED FLIPPER nylon nylon
MATERIALS NOZZLE acetal acetal
BASE/CONNECTION TYPE: Inlet THREAD 3/8" BSPM THREAD 1/2" MNPT
SPRINKLERS
250 163 9.3 0.9
100 125 8.9 0.7
1.9 mm 150 153 10.2 0.8 2.8
Grey 200 178 9.8 0.8
250 200 10.0 0.9
100 147 10.0 0.6
2.0 mm 150 183 11.0 0.8 3.0
Yellow 200 215 11.2 0.9
250 240 11.0 1.0
100 168 10.7 0.7
2.1 mm 150 205 11.6 0.8 3.0
Olive 200 235 11.8 0.9
Rotor Stake Range
250 265 11.4 0.9
100 195 11.0 0.6
5mm CODE: 40555
2.4 mm 150 240 12.5 0.9 3.2
10mm CODE: 40515
Red 200 280 12.5 1.0
13mm CODE: 40535
250 315 12.1 1.0
*Refer to page 52 for stake information
100 245 10.9 0.7
2.6 mm 150 300 11.9 0.8 3.2
Orange 200 350 12.1 0.9
250 395 12.0 1.0
100 265 11.2 0.8
2.8 mm 150 330 12.8 0.9 4.0
NEW Purple 200 385 13.0 1.0
250 430 12.4 1.1
Ordering Information - Rotor Rain® Assembled on Stake w/ 600 mm Tube & Adaptor
Nozzle Size Order Pack Packs per Carton
& Colour Code Quantity Carton (kg)
0.9 mm Black 43805 10 10 7.0
1.0 mm White 43885 10 10 7.0
1.2 mm Brown 43825 10 10 7.0
1.5 mm Green 43835 10 10 7.0
Features
Ÿ Anti-insect spinner design.
Ÿ Proled double frame to maximize water distribution.
Ÿ Easily identiable wide range of colour coded ow rates.
Ÿ Ease of eld disassembly.
Ÿ Long eld life bearing and spinner.
Ÿ Standard or Deector spinner for young trees.
Ÿ Suspension hole for trellis applications.
Ÿ Available in 3/8" or 1/2" male threaded inlets.
Applications
Orchards, row crops and smaller vegetable plots.
Specications
Dimensions Assembled Rotor Rain® Plus 3/8" Rotor Rain® Plus 1/2"
HEIGHT 53 mm 58 mm
WIDTH 46 mm 46 mm
DEPTH 21 mm 21 mm
WEIGHT (approx.) 11.0 g 12.1 g
UV FRAME acetal acetal
STABILISED SPINNER nylon nylon
MATERIALS NOZZLE acetal acetal
BASE/CONNECTION TYPE: Inlet THREAD 3/8" BSPM THREAD 1/2" MNPT
Easy turn eld disassembly
SPRINKLERS
250 113 6.5 0.5
100 94 6.5 0.4
1.6 mm 150 116 7.0 0.4 1.9
Red 200 136 7.4 0.5
250 151 7.7 0.4
100 121 6.8 0.5
1.8 mm 150 149 7.8 0.5 N/A
Light Blue 200 173 8.1 0.5
250 194 8.2 0.6
100 149 8.5 0.9
2.0 mm 150 184 9.9 0.9 N/A
Rotor Stake Range Yellow 200 213 10.5 1.0
250 239 10.8 1.0
100 199 8.9 0.7
5mm CODE: 40555
10mm CODE: 40515 2.3 mm 150 247 9.9 0.7 N/A
13mm CODE: 40535 Purple 200 288 10.2 0.8
*Refer to page 52 for stake information 250 323 10.3 0.8
100 239 9.2 0.6
2.5 mm 150 291 10.5 0.8 N/A
Olive 200 338 10.9 0.8
250 379 10.8 0.7
0.8 mm 0.9 mm 1.1 mm 1.2 mm 1.4 mm 1.6 mm 1.8 mm 2.0 mm 2.3 mm 2.5 mm
Brown Blue Grey Black Orange Red Lt. Blue Yellow Purple Olive
Ordering Information - Rotor Rain® Plus Assembled on Stake w/ 600 mm Tube & Adaptor
Nozzle Size Order Pack Packs per Carton
& Colour Code Quantity Carton (kg)
0.8 mm Brown - Standard Spinner 22175 10 8 5.3
0.9 mm Blue - Standard Spinner 22185 10 8 5.3
1.1 mm Grey - Standard Spinner 22195 10 8 5.3
1.2 mm Black - Standard Spinner 22205 10 8 5.3
1.4 mm Orange - Standard Spinner 22215 10 8 5.3
0.8 mm Brown w/ Deector Spinner 22275 10 8 5.7
0.9 mm Blue w/ Deector Spinner 22285 10 8 5.7
1.1 mm Grey w/ Deector Spinner 22295 10 8 5.7
1.2 mm Black w/ Deector Spinner 22305 10 8 5.7
1.4 mm Orange w/ Deector Spinner 22315 10 8 5.7
Features
Ÿ Dual outlet spinner enhances performance.
Ÿ Standard model has a 25° trajectory with black coloured spinner.
Ÿ Inverted model has a 0° at trajectory with khaki coloured spinner.
Ÿ Range includes two low ow nozzle sizes (2.0 mm & 2.4 mm).
Ÿ Easily taken apart for servicing.
Ÿ UV stabilised materials for long life.
Applications
Greenhouses, vegetable row crops and under tree watering.
Inverted Rotor Max™ is ideal for over-head watering in glasshouse, nursery and
shade house applications. The 0° trajectory also suited to upright operation,
excellent for under foliage or wind affected locations.
Performance Chart
Nozzle Size Upright - 25o on 0.2 m Riser Inverted - 0o on 2 m Riser
25o 25o Pressure (kPa) Flow (lph)
& Colour Diameter (m) Stream Height (m) Diameter (m)
SPRINKLERS
Features
Ÿ Easy snap-on eld tted Deector.
o
Ÿ Directional ribs distribute the water evenly over the 180 pattern.
Ÿ Water is redirected by the cupped spray plate providing improved
application uniformity over at plate deectors.
Applications
Part circle applications such as road edges, driveways and end of sprinkler
rows.
SPRINKLERS
o
Deector 180 21365 10 28 4.8
NEW
180o Deector
Features
Ÿ Low operating pressure range ideal for recycled water sump pumps.
Ÿ Robust stake with push point for inserting into soil.
Ÿ Bubbler Assembly with 2.3 mm diameter nozzle size to reduce clogging.
Ÿ Spray Assembly with 2.8 mm diameter nozzle size to reduce clogging.
Ÿ 400 mm exible off-take tubing with easy insert hypodermic adaptor.
Ÿ Purple coloured components for easy identication of recycled water.
Applications
Distribution of aerobically treated water under trees, shrubs and ground
covers in mulched areas.
Performance
RECYCLED WATER
Ordering Information - ReuZit® Bubbler Assembly w/ Stake, 400 mm Tube & Adaptor
Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
ReuZit® Bubbler Assembly 42005 10 15 7.3
ReuZit® Bubbler
Assembly with Stake,
400 mm Tube &
Adaptor Ordering Information - ReuZit® Spray Assembly w/ Stake, 400 mm Tube & Adaptor
Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
ReuZit® Spray Assembly 40595 10 10 5.4
Specications
Dimensions Assembled Bubbler Assembly Spray Assembly
HEIGHT 343 mm 364 mm
WIDTH 52 mm 51 mm
DEPTH 28 mm 28 mm
WEIGHT (approx.) 46 g 53 g
FRAME acetal acetal
NOZZLE acetal acetal
UV DEFLECTOR acetal acetal
STABILISED SPRINKLER ADAPTOR - polypropylene
ReuZit® Spray MATERIAL STAKE polypropylene polypropylene
Assembly Stake, TUBE PVC PVC
400 mm Tube &
ADAPTOR acetal acetal
Adaptor
BASE/CONNECTION TYPE: Inlet BARB 4 mm BARB 4 mm
Features
Ÿ Low operating pressure range ideal for recycled water sump pumps.
Ÿ Robust stake with hammer point for inserting into soil.
Ÿ Large 3.8 mm diameter nozzle size to reduce risk of clogging.
Ÿ 13 mm barbed take-off to suit low density poly tubing.
Ÿ Purple coloured components for easy identication of recycled water.
Applications
Localised watering of trees and shrubs on mulched areas.
Performance Chart
RECYCLED WATER
ReuZit® Sprinkler
Pressure (kPa) Tested at 0.2 m above ground
Flow (lph) Diameter (m)
30 275 2.6
40 335 3.1
50 380 3.4
60 420 3.9
70 455 4.3
80 490 4.5
90 520 4.6
100 550 4.7
Ordering Information - ReuZit® Sprinkler
Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
Sprinkler Assembly with Stake 13 mm Inlet 40585 10 8 5.4
Sprinkler 1/2" BSPM 21575 10 20 6.4
Rotor Max Deector 21365 10 28 4.8
Specications
Dimensions Assembled Sprinkler Assembly Sprinkler 1/2" BSPM
HEIGHT 407 mm 96 mm
WIDTH 90 mm 90 mm
DEPTH 31 mm -
WEIGHT (approx.) 59 g 38 g
FRAME polypropylene polypropylene
NOZZLE acetal acetal
UV STABILISED
SPINNER acetal acetal
MATERIALS
STAKE polypropylene -
ReuZit® Sprinkler Assembly
ADAPTOR polypropylene -
with Stake 13 mm inlet
BASE/CONNECTION TYPE: Inlet BARB 13 mm THREAD 1/2" BSPM
Indexing Valve
(if required)
ReuZit Spray
Ground Level
Waste
m
Water
m
In
Lila
c
ReuZit Sprinkler
Po
Float Switch
ly
Purpleback
Valve
ReuZit® Sprinkler 1/2" BSPM
Pump
Treatment Tank
Features
Ÿ Simple on/off operation and straight through ow.
Ÿ Operating pressure range up to 300 kPa.
®
Ÿ Green Back cap for standard irrigation applications.
®
Ÿ Purple Back cap for recycled water applications.
Ÿ UV stabilised materials for long life.
Applications
Secondary zone water diversion and ow control. Always install as an
In-Line valve with tubes connected to both inlet and outlet.
Features
Ÿ 3/4” threaded inlet or 1/2” threaded inlet.
Ÿ Simple on/off operation and straight through ow.
Ÿ Operating pressure range up to 300 kPa.
®
Ÿ Green Back cap for standard irrigation applications.
®
Ÿ Purple Back cap for recycled water applications.
Ÿ UV stabilised materials for long life.
Applications
Irrigation from rain tanks, non-pressurised containers or where 1/2” or
3/4” threaded connection is required.
VALVES
Green Back® Valve 14mm Barb x 1/2" 49015 20 22 9.9
Green Back® Valve 15mm Barb x 1/2" 49025 20 22 9.8
Threaded Green Back® Valve Green Back® Valve 16mm Barb x 1/2" 49035 20 22 10.3
1/2" Male Thread
Features
Ÿ Pre-assembled with no internal pipe connections.
Ÿ High strength UV stabilised materials.
Ÿ Includes cable seal and wire connectors.
Ÿ Water, dust and pest resistant.
Ÿ Textured non-slip lid with o-ring seal and stainless steel screws.
Ÿ 3/4” threaded inlet and outlet connections.
Ÿ Easy to connect to existing garden taps using Braided Hose accessory.
Applications
Landscape, home gardens, greenhouses and nurseries. Above and below ground
installation.
Performance Chart
Flow Rate (lpm) Pressure Loss (kPa)
10 30
VALVES
15 63
20 108
25 165
30 231
Operating Specications
FLOW RANGE 1 lpm -30 lpm
PRESSURE RANGE - 24 Vac 20 kPa - 1250 kPa
PRESSURE RANGE - 9 Vdc 20 kPa - 750 kPa
AMBIENT TEMPERATURE 2o C - 60o C
ELECTRICAL - 24 Vac 24 Vac, inrush current 320 mA, holding current 260 mA at 50 Hz
ELECTRICAL - 9 Vdc Latch 9 Vdc, inrush current 1200 mA
Features
Ÿ Inlet pressure range: 0 - 700 kPa.
Ÿ Operating ow: 0.4 - 30 lpm.
Ÿ Two outlet pressure options: 100 kPa or 175 kPa.
Ÿ 3/4” BSPF inlet x 3/4” BSPM outlet.
Ÿ High strength, chemically resistant ABS construction for durability.
Applications
Drip, spray and sprinkler systems in landscape applications. Ideally
connected to taps, valves, tap timers and irrigation valves in a manifold
system.
VALVES
Performance Chart - 100 kPa
160
4 lpm
Outlet Pressure (kPa)
140
15 lpm
120
30 lpm
100
80
100 200 300 400 500 600 700
Inlet Pressure (kPa)
Pressure Regulator
100 kPa
Performance Chart - 175 kPa
220
200 4 lpm
15 lpm
Outlet Pressure (kPa)
180
160 30 lpm
140
120
100
100 200 300 400 500 600 700
Inlet Pressure (kPa)
Specications
Dimensions Operation Connection Type
LENGTH 68 mm OUTLET PRESSURE 100 kPa or 175 kPa Inlet 3/4" BSPF
WIDTH 34 mm FLOW RANGE 0.4 - 30 lpm Outlet 3/4" BSPM
Pressure Regulator WEIGHT (approx.) 31 g
175 kPa Ÿ The Pressure Regulators must always be installed downstream from all shut-off valves, regardless of the
application.
Ÿ Regulators should be installed with the vent hole unobstructed.
Ÿ Do not use sealing compound (solvent cement). If needed, tef lon tape may be used to seal for leaks.
Features
Ÿ Single barb congurations for connecting to micro or supply tube.
Ÿ "Quick" thread or 4 mm thread for connecting to Rigid Risers or Micro
Stakes.
Ÿ A range of adaptors to suit various congurations.
Applications
Home gardens, landscaping and glasshouses.
Adaptor 4 mm (F) x
1/2" Male Thread Ordering Information - Joiners
Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
Adaptor 4 mm (F) x Joiner 4 mm Barb 40145 100 245 14.0
3/8" BSWM Thread
Joiner 4.5 mm Barb 40195 100 240 17.0
Joiner 4 mm Barb x Barb Hypodermic 40935 100 245 14.0
Adaptor ‘Quick’
Thread x Thread
Ordering Information - Elbows
Order Pack Packs per Carton
Type
Adaptor Code Quantity Carton (kg)
Barb x Thread Elbow 4 mm Barb 40245 50 490 14.0
Elbow 4.5 mm Barb 40295 50 490 13.5
Joiner Barb x Barb
Cross
Features
Ÿ Goof Plugs to repair wrongly punched holes.
Ÿ Vari-Flow™ valves simple on/off operation controls water ow in micro
irrigation systems.
Ÿ Micro tee connects micro tube to lateral line.
Applications
Home gardens, landscaping and glasshouses.
FITTINGS
Goof (Repair) Plugs
Micro Tee
Features
Ÿ Reduce time and installation costs.
Ÿ 8 mm x 13 mm elbow suitable for installation from 19 mm LDPE tube.
Ÿ 10 mm inlet ttings suitable for installation from 25 mm LDPE tube.
Ÿ Take-Off elbows are ideal for installing drip lines at any angle to the
supply line ensuring parallel lateral lines in sub surface or above ground
drip systems.
Applications
Sub surface and above ground drip irrigation systems and landscape
watering applications.
25 mm LDPE Tube “DB” Joiner Drip Tube Asta Hold Down Stake
Take-Off Joiner
Take-Off Joiner
10 mm x 14 mm
25 mm LDPE Tube
Take-Off Elbow
10 mm x 13 mm
Take-Off Elbow
10 mm x 14 mm
Installation
Features
Ÿ Easy to install, reducing both time and cost of installation.
®
Ÿ Innovative Xpando Take-Off Adaptor with collapsible barb prevents
pullout and reduces grommet damage during the installation process.
® ®
Ÿ Capo Grommet with internal step combines with Xpando
interference barb to hold off-take rmly in place.
Ÿ UV stabilised materials for long life.
Applications
Agricultural, horticultural, vineyard and landscape applications.
FITTINGS
Xpando® 10 mm inlet x 15 mm Take-Off (17 OD) 45885 25 56 9.3
Xpando® 13 mm inlet x 13 mm Take-Off 45605 25 60 8.7
Xpando® 13 mm inlet x 14 mm Take-Off (16 OD) 45595 25 60 9.5
Xpando® 13 mm inlet x 15 mm Take-Off (17 OD) 45615 25 48 8.2
Xpando® Take-Off Adaptor Xpando® 16 mm inlet x 16 mm Take-Off (18 OD) 45635 25 35 8.8
Xpando® 16 mm inlet x 18 mm Take-Off (20 OD) 45585 25 32 8.3
NEW Xpando® 19 mm inlet x 18 mm Take-Off (20 OD) 45995 25 26 9.4
Xpando® 19 mm inlet x 19 mm Take-Off 45665 25 26 9.4
Xpando® 19 mm inlet x 21 mm Take-Off (23 OD) 45675 25 24 9.3
Xpando® 19 mm inlet x 25 mm Take-Off (27 OD) 45685 25 18 8.0
Xpando® 10 mm x 14 mm 10 mm
25 mm (only) 1.5 mm 3.6 mm 14 mm
Xpando® 10 mm x 15 mm (curved)
Xpando® 13 mm x 13 mm
Xpando® 13 mm x 14 mm 40 mm 1.5 mm 2.3 mm 13 mm 16 mm
Xpando® 13 mm x 15 mm
Xpando® 16 mm x 16 mm
50 mm 1.5 mm 3.6 mm 16 mm 19 mm
Xpando® 16 mm x 18 mm
Xpando® 19 mm x 18 mm
Xpando® 19 mm x 19 mm
50 mm 1.5 mm 6.0 mm 19 mm 22 mm
Xpando® 19 mm x 21 mm
Xpando® 19 mm x 25 mm
Features
®
Ÿ Proven Xpando positive seal proof connection.
Ÿ ½” BSPM thread connection for riser.
Ÿ Large 19 mm Take-Off reduces friction losses.
®
Ÿ Uses standard CAPO rubber grommets.
Ÿ Uses standard recommended 22 mm drill bit for installation.
Applications
Lateral Take-Off tting for sprinkler riser installations. Is a more economical
method than the traditional tapping saddle method.
Connect to
1/2" BSPM Threaded
FITTINGS
Features
Ÿ Directors adapt tubes to valves and female threaded ttings.
Ÿ End Sleeves and Plugs used to terminate tube ends.
Ÿ Saddle clamps used to secure tubing.
Ÿ Compatible with Australian and International tube sizes.
Ÿ UV stabilised materials for long life.
Ÿ Operating pressure range up to 300 kPa.
Applications
Directors connect to threaded ttings, End Plugs terminate irrigation
supply, Saddles and Clips secure irrigation tubes.
FITTINGS
Director 3/4" BSPM x 13 mm 45265 25 35 6.9
Director 1" BSPM x 13 mm 45275 25 20 6.9
Director 1/2" BSPM x 19 mm 45285 25 40 6.8
Director 3/4" BSPM x 19 mm 45295 25 30 6.7
Director Director 1" BSPM x 19 mm 45305 25 18 6.7
Director 3/4" BSPM x 25 mm 45325 25 23 7.0
Director 1" BSPM x 25 mm 45315 25 15 6.2
Director 1" BSPM x 32 mm 45335 25 12 6.1
Features
Ÿ Tapered entry on all barbed ttings for ease of installation.
Ÿ Range suits common Australian and International tube sizes.
Ÿ UV stabilised materials for long life.
Ÿ Operating pressure range up to 300 kPa.
Applications
Home gardens, landscaping and commercially installed irrigation systems.
Features
Ÿ Tapered entry on all barbed ttings for ease of installation.
Ÿ Range includes common Australian and International tube sizes.
Ÿ UV stabilised materials for long life.
Ÿ Operating pressure range up to 300 kPa.
Applications
Home gardens, landscaping and commercially installed irrigation systems.
FITTINGS
Tee 19 mm 45065 25 22 5.3
Tee 25 mm 45075 25 8 4.9
Tee 32 mm 45085 25 4 3.7
Tee Reducing Tee 19 mm line x 13 mm branch 45105 25 24 5.2
Reducing Tee 21 mm line x 19 mm branch 46255 25 18 5.4
Reducing Tee 25 mm line x 13 mm branch 45115 25 11 5.3
Reducing Tee 25 mm line x 19 mm branch 45125 25 10 5.3
Reducing Tee 32 mm line x 25 mm branch 45135 25 5 4.0
Threaded Tee 13 mm line x 1/2" BSPF branch 45155 25 18 6.9
Threaded Tee 19 mm line x 1/2" BSPF branch 45165 25 15 6.3
Threaded Tee 25 mm line x 1/2" BSPF branch 45175 25 10 5.8
Threaded Tee Female
Threaded Tee 13 mm line x 1/2" BSPM branch 45185 25 25 6.5
Threaded Tee 19 mm line x 1/2" BSPM branch 45205 25 22 5.2
Threaded Tee 19 mm line x 3/4" BSPM branch 45215 25 16 4.6
Threaded Tee 25 mm line x 1/2" BSPM branch 45225 25 10 5.4
Threaded Tee 25 mm line x 3/4" BSPM branch 45235 25 9 5.4
Increasing Tee 15 mm line x 16 mm branch 46305 25 27 7.1
Threaded Tee Male Increasing Tee 15 mm line x 19 mm branch 46315 25 24 5.8
Increasing Tee 18 mm line x 19 mm branch 46325 25 20 5.5
Cross 13 mm
Features
Ÿ Double barb for increased retention.
Ÿ Sharp-edged barbs create leak-proof seal.
Ÿ Increased strength and superior quality.
Ÿ Heat, chemical and wear resistant.
Ÿ Engineering grade UV stabilised Acetal plastic for long life.
Ÿ Operating pressure range up to 300 kPa.
Ÿ The space between double barbs allows extra security for clamping.
Applications
Vineyard and other agricultural applications. Ideal for trellis and
suspended irrigation systems.
Size options:
Ÿ 13 mm - Suits nominal 13 mm I.D. tube
Ÿ 14 mm - Suits nominal 14 mm I.D. and 16 mm O.D. tube (Dripline)
Ÿ 15 mm - Suits nominal 15 mm I.D. and 17 mm O.D. tube (Dripline)
Ÿ 16 mm - Suits nominal 16 mm I.D. and 18 mm O.D. tube (Dripline)
Ÿ 18 mm - Suits nominal 18 mm I.D. and 20 mm O.D. tube (Dripline)
Ÿ 19 mm - Suits nominal 19 mm I.D. tube
Ÿ 21 mm - Suits nominal 21 mm I.D. and 23 mm O.D. tube (Dripline)
Ÿ 25 mm - Suits nominal 25 mm I.D. tube and 27 mm O.D. tube (Dripline)
FITTINGS
14 mm (suits 16 O.D. tube) 47415 25 30 8.1
15 mm (suits 17 O.D. tube) 47395 25 28 7.9
16 mm 47425 25 24 7.5
18 mm (suits 20 O.D. tube) 47435 25 22 8.1
19 mm 47605 25 18 7.1
21 mm (suits 22/23 O.D. tube) 47445 25 16 7.7
“DB” Tee 25 mm 47455 25 10 6.8
“DB” Director
Ordering Information - “DB” End Plugs
Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
13 mm 47685 25 120 12.4
14 mm (suits 16 O.D. tube) 47615 25 100 11.7
16 mm 47625 25 72 10.2
18 mm (suits 20 O.D. tube) 47635 25 60 9.9
“DB” End Plug 19 mm 47665 25 56 10.3
21 mm (suits 22/23 O.D. tube) 47645 25 40 8.4
Features
Ÿ Easily identiable green colour.
Ÿ Tapered entry on all barbed ttings for ease of installation.
Ÿ Sizes suit most popular drip line tubing; 17 OD, 20 OD & 22/23 OD drip tubes.
Ÿ Models to connect 19 mm LDPE to popular drip line tubing.
Ÿ Operating pressure range up to 300 kPa.
Ÿ UV stabilised material for long eld life.
Applications
Vineyard and other agricultural applications. Ideal for trellis and suspended
irrigation systems.
Features
Ÿ Smooth edges allow assembly by hand.
Ÿ Range of sizes to suit most low density poly (LDPE) tube connections.
Ÿ Sharp serrated teeth provide secure lock and rmly hold tube to tting.
Ÿ Can be twisted and unclamped if required.
Ÿ Also suitable for dripline tubing.
Ÿ Improved ratcheting action and ability to t to a trellis wire.
Applications
Home gardens and landscaping applications.
FITTINGS
Ratchet Clamp #17 44345 100 45 11.8
16 mm Ratchet Clamp #18 44335 100 45 11.2
Ratchet Clamp #20 44295 100 40 11.1
19 mm Ratchet Clamp #22 44315 100 35 10.6
Ratchet Clamp #23 44285 100 32 10.6
25 mm Ratchet Clamp #28 44325 100 16 10.1
Ratchet Clamp
Suits ID Poly Tube Tube OD Range Suits OD Dripline
13 mm 15 - 16 mm 15 mm
#15
14 mm 16 - 18 mm 16 - 17 mm
#17
16 mm 17 - 19 mm 18 mm
#18
18 mm 19 - 21 mm 20 mm
#20
19 mm 21 - 23 mm 22 mm
#22
21 mm 22 - 24 mm 23 mm
#23
25 mm 27 - 30 mm 27 mm
#28
Features
®
Ÿ Asta Stakes suitable for plasticised PVC and polyethylene tubing and
Rigid Risers (6.9 mm OD).
®
Ÿ Asta Stake Assemblies suitable for most micro spray and micro sprinkler
installations with 4 mm threaded inlets.
Ÿ UV stabilised materials for long life.
Applications
Asta® Stakes for rigid riser stability; Asta® Stake Assemblies for home
gardens and landscape applications.
40875 25 20 10.8
Asta® Stake 420 mm 40895 25 12 9.1
Asta® Stake 530 mm 40905 25 10 9.5
Asta® Stake
310 mm Ordering Information - Rigid Risers
Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
200 mm with ‘Quick’ thread adaptor tted 43125 100 26 12.6
Asta® Stake 300 mm with ‘Quick’ thread adaptor tted 43135 100 18 13.8
Adaptor
450 mm with ‘Quick’ thread adaptor tted 43145 100 11 12.8
Asta® Stake - 200 mm, 310 mm, 420 mm, and 530 mm Rigid Riser - 200 mm, 300 mm, and 450 mm
Asta® Stake Rigid
Assembly Riser
Features
Ÿ Tube piercing point on each stake tip allows creation of holes in
laterals, removing the need for a separate installation tool.
Ÿ Robust design
Ÿ Retaining hole in stake to align and support offtake tubing.
Ÿ UV stabilised materials for long life.
Applications
Landscape and agricultural orchard applications.
FITTINGS
Micro Stake with 400 mm tube and Adaptor 40835 25 6 6.0
Micro Stake with 500 mm tube and Adaptor 40784 25 6 8.0
Micro Stake with 600 mm tube and Adaptor 40705 25 5 5.9
NEW
Micro
Stake
Features
®
Ÿ Asta Clip stake locates and secures micro polyethylene tubing (up to
7mm OD).
®
Ÿ Asta Hold Down stake locates and secures polyethylene tubing (up to
22 mm OD).
Ÿ UV stabilised materials for long life.
Applications
Securing drip and micro irrigation tubing in home gardens, landscaping,
and agricultural installations.
Asta® Clip
Stake
Asta®
Hold-Down
Stake
Features
TM
Ÿ Rotor Stake available with 5 mm, 10 mm and 13 mm barb inlet.
TM
Ÿ Rotor Stake has a tube piercing point for hole punch installation of 4 mm
Adaptors on micro tube, a retainer hole to align and support micro tubing.
Ÿ Sprinkler Adaptors available in 5 mm, 10 mm and 13 mm barb to suit trellis
installation.
Ÿ Collar pipe Sprinkler Adaptor available in 5 mm, 10 mm and 13 mm barb to
suit 20mm uPVC or Galvanised pipe risers.
Ÿ Rod Stake Sprinkler Adaptors available in 5 mm and 10 mm barb to suit 5 mm
Fibreglass or Steel Rods.
Ÿ Robust design with UV stabilised materials for long eld life.
Applications
All stakes and Adaptors suit Rotor Rain® and Rotor MaxTM and industry 3/8" Male
threaded micro sprinklers.
FITTINGS
Rotor StakeTM 3/8" BSPF with 10 mm barb 40515 25 6 5.2
Rotor StakeTM 3/8" BSPF with 13 mm barb 40535 25 6 5.3
Rotor StakeTM 3/8" BSPF with 600 mm tube & ad. 40675 25 4 5.9
Rotor StakeTM for typical orchard or landscape installations
Sprinkler Adaptor Collar Pipe Sprinkler Adaptor Rod Stake Sprinkler Adaptor
TM
Rotor Stake
with 600 mm Tube
and Adaptor
Features
Ÿ Simple to use ergonomic design.
Ÿ Tap Adaptor suits Snap-On connections.
Ÿ UV stabilised materials for long life.
Applications
Home gardens and landscaping applications.
Snap-On Tap
Ordering Information - Snap-On Tap Adaptors
Tap Adaptor
Adaptor BSPF x BSPM Order Pack Packs per Carton
Type
Code Quantity Carton (kg)
Snap-On Tap Adaptor 3/4" BSPF 45775 25 38 10.0
Snap-On Tap Adaptor 1" BSPF 45785 25 30 9.8
Tap Adaptor Reducing Bush 1" BSPM x 3/4" BSPF 45815 25 44 9.3
Tap Adaptor 1" BSPF x 3/4" BSPM 45825 25 30 12.0
Features
Ÿ In-Line model with barbed inlet and outlet.
Ÿ Snap-On model for direct connection to standard tap adaptors.
Ÿ 80 mesh screen lter.
Ÿ Easily taken apart for cleaning.
Ÿ Effective compact lters with minimal ow losses.
Applications
For low pressure micro irrigation systems.
FITTINGS
In-Line Filter 14 mm barb 44395 25 14 10.2
In-Line Filter 16 mm barb 44365 25 12 9.9
In-Line Filter 19 mm barb 44375 25 6 7.4
In-Line Filter 25 mm barb 44445 10 8 7.0
In-Line Filter
In-Line Filter 25 mm cut away detail
Features
TM
Ÿ Key Punch creates holes in tubing for inserting emitters. The sleeve
assists in installing hexagonal based jets and the hole aids removal of
jet caps for cleaning.
Ÿ 2 in 1 Punch and Cutter is designed for cutting CVT and LDPE tubing up
to 19 mm (21 mm OD) and punching holes into tubing for emitters and
ttings.
Ÿ 2 in 1 Punch and Cutter comes pre-packaged in ready-to-hang retail
pack.
Applications
For installing micro irrigation systems by home gardeners, contractors and
professional irrigators.
Key PunchTM
®
INSTALLING POTSTREAM DRIPPERS
Cut a length of 4 mm Connect to your Adjust the water
micro tube to suit the 13 mm tube by application rate to
location of your pot pushing the 4 mm suit the size of pot
plant, then push a joiner into holes or plant type by
4 mm joiner into one you have punched rotating the cap.
end of the tube and in the tube.
®
a Potstream into the The cap can also
other. Clip on a Tidy-BowTM be fully closed to
Elbow to stop the ow.
keep tube
neatly beside
your pots.
® TM
INSTALLING SHRUBBLER , SPECTRUM OR MINI BUBBLER SPIKES
Twist off the barbed joiner attached to Cut 4 mm micro tube to a suitable length
the side of the spike. for each plant location. Push the
barbed joiner into one end of
the tube, then push the
®
Shrubbler , SpectrumTM or
Mini Bubbler Spike into the
other end of the tube. ®
Connect your Shrubbler ,
SpectrumTM or Mini Bubbler barb to
your 13 mm tube by pushing the
barbed joiner into a hole you have
created in the tube using the
tube punch.
Follow us
Emitter
La
te
ra
l
A typical agricultural micro irrigation system features the following core elements:
Ÿ Water Supply - The water supply can be an open water source such as a river, channel, dam or tank or a ground water
supply such as a bore or a well.
Ÿ Pump - The pump provides the energy for the system to operate. Pump selection needs to consider the operating
pressure of the micro emitters, pipe friction losses, elevation differences, valves and ttings losses, ltration losses and
allow some contingencies for system inefciencies and system ageing. A good pump selection will ensure that the pump
operating efciencies are at their peak.
Ÿ Fertigation/Chemigation - The fertigation system allows for the application of soluble fertilizers to be delivered through the
micro irrigation system. This can be a very effective method of applying fertilizers as micro irrigation systems can have
application efciencies of up to 90%. Chemigation is the method of applying system cleansing agents such as chlorine
and acid injection to clean and ush contaminants out of the system.
Ÿ Filtration - A ltration system is an essential element of micro irrigation systems for removing particulate matter from the
water supply. In open water situations organic matter is usually present and a good method of ltration is the use of
media ltration. With ground water situations there is usually more inorganic material and disc and screen lters are often
used. Filters require regular backwashing and cleaning which can sometimes be automated. Filters also require regular
preventative maintenance to keep them operating in peak condition. It is important to get the right ltration system for
your micro irrigation system and we would recommend seeking the assistance of a certied irrigation designer for advice.
Ÿ Mainline - The mainline pipework transfers the water from the water supply to the zone control valves. The pipe is usually
uPVC or PE (Polyethylene) piping systems sized to suit the demand situation. Good design practice is to have water
velocities in the mainline pipework system to be less than 1.5 m/s. Changes in direction of pipework in mainlines should
also be thrust blocked (anchored with concrete).
Ÿ Zone Control Valves - The zone control valve turns on and off the zone of emitters. These valves can be simple manual
on off valves or fully automated solenoid operated valves. To provide constant pressure to the zone these valves can
often incorporate a pressure regulator which can be set to a control downstream pressure. Air vacuum relief valves are
also often included at these zone control valve points.
Ÿ Submain - The submain is the pipework that supplies the lateral pipework. It is usually either uPVC or PE Piping system.
®
Xpando Take offs are often used for connecting the submain pipework to the Lateral pipework.
Ÿ Lateral - The lateral pipework is usually low density polyethylene (LDPE) tubing and runs along the row.
Ÿ Emitters - Emitters can be drippers, sprays or mini sprinklers which are placed to water the root zone of the crop.
Ÿ Flushing points - A good micro irrigation system will incorporate ushing points at the end of the submains and the
laterals. These points can be opened periodically to ush out any accumulated sediments.
Prices set out in the Antelco Australian Bulk Price List are list Goods will be accepted for return only if prior approval has been
prices excluding GST. Prices may change without notice and obtained from Antelco Pty Ltd. The goods must be undamaged,
customers may conrm prices at the time of ordering. Antelco unsoiled and in a saleable condition. All returned goods must
tax invoices show GST for each line item, total GST and a nal include a copy of the original invoice and packing slip. Goods
total including GST. that are approved for return after thirty (30) days from the date of
delivery are subject to a 15% restocking charge. Freight cost and
Payment and trading terms risk will remain the responsibility of the customer.
Orders Compatibility
Orders should be e-mailed to Antelco Head Ofce, Murray Antelco Pty Ltd is a manufacturer of irrigation products which are
Bridge, South Australia. designed for use in outdoor irrigation applications only and low
Customers may contact the Antelco Sales Department with pressure systems where the operating pressure at the product
special orders. They will be advised whether their order can be does not exceed 300 kPa. Decisions on the use of Antelco
CONDITIONS
satised, together with pricing and anticipated delivery time. products in any other situation remain the responsibility of the
customer. If there is uncertainty as to the particular use of the
A minimum order handling fee of $20.00 (GST inclusive) will product, the customer or end-user should test its suitability for that
apply to orders with a total value of goods of less than $120.00 application.
(GST inclusive).
Risk and Title
Urgent (Air Cargo) Orders
Risk of loss or damage to the goods, passes to the customer at the
Orders for shipment by air must be received before 10.00 am to time of despatch from the Antelco Pty Ltd warehouse.
be despatched the same day, and charges will apply. Airbags Notwithstanding that the risk of the goods may pass to the
are best restricted to three or ve kilograms. customer, Antelco Pty Ltd retains all legal and equitable rights of
ownership of the goods until payment has been made in full
Freight and Insurance (including interest and any other charges associated with the
supply of the goods). The customer shall store and protect the
All prices are ex-works Murray Bridge South Australia. Delivery goods separately to identify them as the property of Antelco Pty
from Antelco Murray Bridge is at the customer's expense. Ltd until paid in full. The customer may sell the goods in the
Goods are despatched uninsured and at customer’s risk. ordinary course of business, but any monies received for the sale
Customers acknowledge that delivery insurance is their of the goods must be held for the benet of Antelco Pty Ltd. If the
responsibility. customer fails to pay the debt, Antelco Pty Ltd reserves the right to
enter the premises where the goods are located, seize the goods
Receipt of Goods to which ownership has not passed, and sell them to recover the
amount of debt owed, without being liable for damages.
Ordered goods should be opened promptly on receipt and
checked against the enclosed packing slip. If correct, the Limit of Liability
consignment note should be signed. If any item is missing and
not marked as being “back ordered”, immediately advise In the event of a breach of these Conditions of Sale or of any
Antelco. implied warranties, whether statutory or otherwise, or arising out of
or in relation to the sale of Antelco products, Antelco's liability is
Back Orders limited to the repair or replacement of defective goods. In no
event will such a breach give rise to any liability for punitive
Back orders are treated as new orders. Back orders are damages, loss of prots or expected future business, damage to
invoiced when they are despatched. Customers should advise reputation or goodwill, loss of any order or contract or any
Antelco if they do not want any items back ordered or if they consequential or indirect loss or damage arising from any cause
want back orders cancelled. Antelco will cancel a back order whatsoever.
if it has not been despatched.
Warranty
Shortages or Damaged Goods
In addition to any statutory warranty and subject to these
Claims for shortages or errors on orders despatched will not be Conditions of Sale, Antelco Pty Ltd warrants that its products are
recognised after seven (7) days from the date of delivery. If of merchantable quality, free from defects or faults, and are t for
goods are received damaged or the delivery is incomplete as the purpose for which they were manufactured or supplied. At its
per the packing slip, record details on the delivery note and option and in its sole discretion, Antelco Pty Ltd will repair or
advise the carrier and Antelco Pty Ltd immediately. replace goods found to be defective in workmanship or materials
within twelve (12) months of the date of purchase. The customer
will be responsible for delivering products to be repaired to
Force Majeure
Antelco Pty Ltd.
If by reason of any fact, circumstance, matter or thing beyond
its reasonable control, Antelco Pty Ltd is unable to perform in Applicable Law
whole or in part any obligation under these Conditions of Sale
then Antelco Pty Ltd is relieved of that obligation to the extent All matters for determination between Antelco Pty Ltd and the
and for the period that it is so unable to perform and is not customer shall be determined by a court of competent jurisdiction
liable to the customer in respect of such inability. in the State of South Australia according to the laws of South
Australia.
All prices set out in the Antelco Export Price List are in Antelco Pty Ltd reserves the right to re-design its products and
Australian dollars and are ex works, Murray Bridge, South thereby cause changes to the specications, without notice
Australia, Australia. Prices may change without notice and and without incurring any liability.
customers may conrm prices at the time of ordering.
Compatibility
Payment
Antelco Pty Ltd is a manufacturer of irrigation products which
Payment is required prior to despatch and may be made by are designed for use in outdoor irrigation applications only
VISA or MasterCard or by electronic funds transfer (contact and low pressure systems where the operating pressure at the
Antelco Pty Ltd for bank details). Any fees and charges product does not exceed 300 kPa. Decisions on the use of
associated with the payment method are to be borne by the Antelco products in any other situation remain the
customer. responsibility of the customer. If there is uncertainty as to the
particular use of the product, the customer or end-user
Orders should test its suitability for that application.
Orders should be e-mailed to Antelco Head Ofce, Murray Risk and Title
Bridge, South Australia.
Orders will be accepted and invoiced at the prices in effect Risk of loss or damage to the goods passes to the customer
at the date of shipment. Antelco Pty Ltd reserves the right to and/or the carrier at the time of despatch from Antelco Pty
Ltd warehouse at Murray Bridge. Antelco Pty Ltd accepts no
CONDITIONS
change prices without notice.
liability for goods lost or damaged in transit, and any carrier
shall be deemed to be the agent of the customer. Goods
Freight and Insurance held or stored for the customer shall be at the risk and
expense of the customer, from the time at which the goods
In addition to sea or air freight costs, customers will be
otherwise have been available for collection or despatch.
charged for transport and any associated costs for delivery to
Notwithstanding that the risk of the goods may pass to the
an international departure point.
customer, Antelco Pty Ltd retains all legal and equitable rights
Goods are despatched uninsured and at the risk of customers of ownership of the goods until payment has been made in
who acknowledge that delivery insurance is their full (including interest and any other charges associated with
responsibility. Antelco can obtain insurance for customers on the supply of the goods).
request.
Limit of Liability
Packaging
In the event of a breach of these Conditions of Sale or of any
All goods are packaged in export cartons in accordance implied warranties, whether statutory or otherwise, or arising
with Antelco standard practice. out of or in relation to the sale of Antelco products, Antelco's
liability is limited to the repair or replacement of defective
Shortages or Damaged Goods goods. In no event will such a breach give rise to any liability
for punitive damages, loss of prots or expected future
Claims for shortages or errors on orders despatched will not business, damage to reputation or goodwill, loss of any order
be recognized after seven (7) days from the date of delivery. or contract or any consequential or indirect loss or damage
If goods are received damaged or the delivery is incomplete arising from any cause whatsoever.
as per the packing slip, record details on the delivery note
and advise the carrier and Antelco Pty Ltd immediately. Warranty
Goods will be accepted for return only if prior approval has All matters for determination between Antelco Pty Ltd and
been obtained from Antelco Pty Ltd. The goods must be the customer shall be determined by a court of competent
undamaged, unsoiled and in a saleable condition. All jurisdiction in the State of South Australia according to the
returned goods must include a copy of the original invoice laws of South Australia.
and packing slip. Goods that are approved for return after
thirty (30) days from the date of delivery are subject to a 15%
restocking charge. Freight cost and risk will remain the
responsibility of the customer.
www.antelco.com
PUTTING WATER WHERE IT COUNTS!®