Professional Documents
Culture Documents
INSTRUCTIONS:
Answer on this question sheet.
Lectures, class notes, books, laptops, iPads, iPhones, etc. are NOT allowed.
Arithmetic-only calculators are accepted.
Show all your work, e.g., your solution process, the equation(s) that you use, the values
of the variables used the equation(s), etc.
Include the unit of measurement in each answer.
Do NOT communicate with any other students.
2. The voltage and the current at the terminals of the circuit element in the figure below
are zero for 𝑡 < 0. For 𝑡 ≥ 0, they are 𝑣 (t) = 8sin(3t) V and 𝑖(𝑡) = 2sin(3t) A. Find the
average power supplied to that circuit element. (0.5 point)
1
Hint: sin(𝑎). sin(𝑏) = [cos(𝑎 − 𝑏) − cos(𝑎 + 𝑏)]
2
𝑖(𝑡)
+
𝑣(𝑡) element
−
Group 2 - Page 1 of 4
HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY – FACULTY OF ELECTRICAL AND ELECTRONICS ENGINEERING
𝑣 (mV)
2
⋯
0 4/3
10/3
−1 𝑡 (ms)
Group 2 - Page 2 of 4
HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY – FACULTY OF ELECTRICAL AND ELECTRONICS ENGINEERING
Number of nodes:
10 10
2. Use the Kirchhoff’s laws to find the values of 𝑣1 and
𝑣2 . (2.0 points)
3. Find the power of 24V ideal voltage source in SRS. Determine that it is absorbing or supplying
power. (0.5 point)
Group 2 - Page 3 of 4
HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY – FACULTY OF ELECTRICAL AND ELECTRONICS ENGINEERING
R1 R3
10Ω 10Ω
Circuit A R2 Is R4 Circuit B
+
Vs 12 V 10Ω 0.5 A V 10Ω
-
1. Find the IV characteristic equations of the circuit A and circuit B. (1.5 point)
Group 2 - Page 4 of 4