Professional Documents
Culture Documents
KNOWLEDGE IS POWER
INTERNSHIP REPORT ON
Name NITHISH .S
SRN No R19ME082
Company name FOURESS ENGINEERING
INDIA PVT LTD
Department PU – 1
Joining Date 26-07-2023
End Date 16- 08-2023
CERTIFICATE
This is to certify that the internship in FOURESS ENGINEERING INDIA
PVT LIMITED is carried out by NITHISH.S (R19ME082) a bonafide student
at Reva University, towards the partial fulfilment for the award Bachelor of
Technology in Mechanical Engineering during the year 2022-2023. It is certified
that all corrections/suggestions indicated for continuous internal assessment
have been incorporated in the report to the best of our knowledge. This report
has been approved as it satisfies the requirements in respect of Internship.
ACKNOWLEDGEMENT
Interning at FOURESS ENGINEERING INDIA PVT LTD. was a great learning experience and helped
me grow, both as a professional and as an individual.
I thank FOURESS ENGINEERING INDIA PVT LTD. for accepting me as an intern and the HR -HEAD
Mr. Y SHANKAR MURTHY for giving me an opportunity to carry out my internship in esteemed
organization.
I Thank all the staff and employees of FOURESS ENGINEERING PVT LTD, for providing me with
their precious time.
I express my heartfelt gratitude to the Managing Director of FOURESS ENGINEERING INDIA PVT
LTD., for constantly mentoring and guiding me for the entire duration of my internship. I thank them for
providing me with their precious time and for clearing all my doubts. I would also like to take this
opportunity to thank everyone at FOURESS INDIA PVT LTD., Bangalore for providing me with a
prospect to intern along with helping me and clearing all my doubts.
Last but not the least; I would like to thank my parents for being my pillar of support throughout this
internship and even beyond.
I also extend my gratitude and regards to everyone who has helped me directly or indirectly throughout the
internship.
Nithish. S
EXECUTIVE SUMMARY
This report summarizes my experience and learning as an intern at the Production Engineering Department
of FOURESS ENGINEERING INDIA PRIVATE LTD. from 26-07-2022 until 16-08-2022. My
internship mainly focused on the BUTTERFLY VALVES.
After thoroughly understanding the manufacturing process of valves.by observing the different processes
and machines, I focused mainly on the Inventory Atomization, spending most of my time observing and
talking to operators at the production unit responsible for the same and in the report, I've tried to summarize
the same.
The report contains all major observations and conclusions regarding my work as an intern. It also contains
various software and charts for easy understanding. The report aims at highlighting the process of Inventory
Atomization and different suggestions that could prove to be useful to reduce the time of inventory.
The report also summarizes the knowledge I have gained as an intern and the various practical aspects of
everything I had learnt so far in theory classes. I had the opportunity to see the practical application of
different topics I have learnt so far in my course beginning from the semester till the now. I am sure this
experience is also going to help me going further in my studies.
TABLE OF CONTENT:
• ACKNOWLEDGEMENT.......................................................................................... 3
• EXECUTIVE SUMMARY.........................................................................................4
• COMPANY PROFILE............................................................................................... 6
• CHAPTER - 1
• INTERNSHIP OUTCOMES
COMPANY PROFILE
From its inception over five decades ago, FOURESS was laid on a foundation of enterprise, integrity,
innovation. The Focus was to use core engineering strengths, to make valves in India on par with imported
products used in the Power and Water industries.
The FOURESS Group of companies is a premier global supplier for engineered products in industrial flow
related applications manufactured in India, to reach every industry in all parts of the world, on the strength
of its quality, competitiveness, and ability to meet the need-based delivery.
Our track record, built over decades of success, our customer-focused Design and R&D, our manufacturing
capabilities, competitive labour, and the spirit of reaching out to the opportunities have all provided the
right blend for growth and excellence.
FOURESS ENGINEERING (INDIA) PVT LTD is the flagship company of the FOURESS GROUP of
companies, and the leading supplier of Flow Control Devices for Power, Water, Wastewater, Steel, Oil &
Gas, Refinery & Petrochemical sectors in India. We commenced operations in 1962 with the manufacture
of carbon steel industrial valves at Thane, and in 1973 signed what was to be the first of many Foreign
Collaboration Agreements with world renowned Valve Manufacturers in the U.K, Germany, Switzerland,
and Japan.
Growing markets, shifts in production and the demand for a vast range of products and the latest technology
has further led to the setting up of 8 factories in India, including at Bangalore, Aurangabad, Chennai, and
Baroda. FOURESS specializes in custom-engineered Valves and Gas Tight Isolators (Dampers), knife gate
valve for power, water, steam, oil, and gas applications and has supplied reliable and durable products to
the projects in over 50 countries in 6 continents.
FOURESS ENGINEERING (INDIA) PVT LTD has emerged as a leading player in the
global market for industrial valves, isolators, high intensity dampers and gas line valves
COMPANY OVERVIEW
• Company's authorized capital stands at Rs 1000.0 lakhs and has 75.0% paid-up capital which is Rs
750.0 lakhs. Fouress Engineering (India) limited last annual general meet (AGM) happened on 30 Sep,
2020. The company last updated its financials on 31 Mar, 2021as per Ministry of Corporate Affairs
(MCA).
• Production activities supported by work force of over 1000 and modern equipment’s.
• A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases,
liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various
passageways.
• The use of valves to regulate the flow of water dates to Indus valley (1700 to 1800 BC).
• Major valve design began during era of industrial revolution and with use and development of steam
(1700 AD).
• Modern butterfly valve was first invented by Mr. Carl Benz in 1983 to regulate the flow of
carburettor.
• Early 1920’s the emergence of hydropower technology and many companies developed the valves,
conducted model tests.1950 onwards. Butterfly valves were extensively used in Hydropower plant.
• Bangalore plant is into design and manufacturing of isolation valve like the following:
• Butterfly valves
• Triple eccentric spherical valves
• Knife gate valve
• Isolators
• Dampers.
.
• The butterfly valves are used in thermal power plants, Water treatment plants, process industry
and hydro power plants.
• Most cases these valves are used for isolation purposes however, butterfly valves are also used
for control/throttling duty.
Valves
GALLERY
1. 2.
3. 4.
Production Units:
There are 5 Production Units (PUs) in Fouress Engineering Pvt Ltd., Bangalore plant for
manufacturing a range of butterfly valves, high performance valves. Most of these production units
are a customer or supplier to another production unit in the same plant.
• In this unit, Designers are the key part of a design team. They are a group of design experts
that create, test, and iterate product design drafts again and again to ensure better product and user
experiences.
• Crio and Solid works are the main design tools used to Build professional Projects.
• Design team is being induced right from DE state, where the informed requirements are understood
& clarified at each step & quoted accordingly to bag the order.
• Design team generate design output from the design input.
• Revisions in drawings/documents.
• Depending on the design submitted by the design team. As soon as the job pocket is prepared, it
is sent to the manufacturing supervisor, who then assigns the task to the operators to complete.
The main production of the machine shop are the parts for the valves
• Body
• Disc
• Steam and seat
• Drive shaft
• Stub shaft
• End cover plate
• Thrust pad
• A manufacturing company, Fouress engineering purchases raw materials and then processes them
on the machines available. Each part of the butterfly valve is made from scratch.
Manufacturing machinery:
• Vertical turning lathes (VTL) are machines that orient the spindle in the vertical plane in a fixed
position. The workpiece then spins, moving up and down to put it in line with the cutting head.
These machines are less complex than horizontal lathes. This machining option is best for pieces
that focus on shaping a single side of a part. While not suited for high-production runs, they excel
at taking heavy cuts on medium and large parts.
• There are certain applications where a vertical turning lathe machine has an advantage over other
machining solutions. We take advantage of this to produce better parts and more efficient machine
piece. This can handle operations of 1000 to 2400mm. Used for body and disc manufacturing.
• Turning Processes our machines can handle:
• Boring
• Cutting
• Drilling
• Facing
• Internal forming
• Knurling
• Necking
• Plasma cutting is an effective way of cutting thin and thick materials alike. Hand-held torches can
usually cut up to 38 mm (1.5 in) thick steel plate, and stronger computer-controlled torches can cut
steel up to 150 mm (6 in) thick. Since plasma cutters produce a very hot and very localized "cone" to
cut with, they are extremely useful for cutting sheet metal in curved or angled shapes.
• The arcs are generated in a three-step process. A high voltage spark briefly ionizes the air within the
torch head. This makes the air conductive and allows the "pilot arc" to form. The pilot arc forms within
the torch head, with current flowing from the electrode to the nozzle inside the torch head. The pilot
arc burns up the nozzle, a consumable part, while in this phase. The air then blows the plasma out the
nozzle towards the work, providing a current path from the electrode to the work. When the control
system senses current flowing from the electrode to the work, it cuts the electrical connection to the
nozzle.
• An assembly line is a manufacturing process (often called a progressive assembly) in which parts
(usually interchangeable parts) are added as the semi-finished assembly moves from workstation to
workstation where the parts are added in sequence until the final assembly is produced. By mechanically
moving the parts to the assembly work and moving the semi-finished assembly from workstation to
workstation, a finished product can be assembled faster and with less labour than by having workers
carry parts to a stationary piece for assembly.
• Mild Steel Fabrication is made utilizing excellent paint just as combinations. These items are utilized
in different businesses, and we offer these items at industry driving costs to customers. Our items are
exceptionally known for their viable execution, and we offer these items in different examples, sizes,
structures and shapes and these items are effectively accessible in the market. A predominant quality
mills steel fabrication is done on different kinds of mild steel (MS) sections and plates. We have all the
accessible assets and a profoundly proficient group of laborers with us. Quality affirmation is a
significant need, and we profoundly trust in making our client fulfilled. Fabrication is done in an
altered way to fulfil each customer's needs in the most ideal way. We likewise put stock in conveying
our administration in a characterized stipulated period.
• The valves are usually made from mild steel. A body disc covers most of the valve's parts.
• Main Types of Paint Used with Steel Standard primers Specialty paints 1. Zinc 2. Epoxy 3.
Polyurethane
• After the valve is manufactured and fabricated, it is ready for insertion into the next process.
• Fouress's core manufacturing process required bringing in gear boxes and actuators from OEM
vendors.
• In this case, the main suppliers are AUMA PVT LTD, they provide the gearbox and the actuators for
the valves
QUALITY CONTROL
• Quality control involves testing butterfly valves and determining if they are within the specifications
and Requirements for the final product. The purpose of the testing is to determine any needs for
corrective actions in the manufacturing process. Good quality control helps companies meet consumer
demands for better products.
• Carry out quality assessment measures of all the products ready to be shipped and incoming raw
materials
• Take a thorough look at the plans, specifications, and blueprints to understand the product requirements
• Reject all the incoming raw materials fail to meet quality expectations and report the issue to the
concerned department at the earliest
Case study-01
DESIGN OF VALVES
With an expected Compound Annual Growth Rate (CAGR) of approximately 6.6% between 2014 and
2018, the manufacture of control valves is enhanced by the Oil and Gas industry in proportion to the refinery
automation and control needs. Moreover, these valves have applications in deep-water exploration
activities. Designing control valves includes all categories, for example, sliding stem control valves (mainly
used in the oil and gas industry) and rotating shaft control valves (predominantly linked to power
generation, water and wastewater, and chemical processing industries)
1. CAD ,CRIO, SOLID WORKS ARE SOME OF THE SOFTWARE USED IN THIS FIELD.
2. Computer-aided design (CAD) is the use of computers (or workstations) to aid in the creation,
modification, analysis, or optimization of a design. This software is used to increase the productivity
of the designer, improve the quality of design, improve communications through documentation, and
to create a database for manufacturing. Designs made through CAD software are helpful in protecting
products and inventions when used in patent applications. CAD output is often in the form of electronic
files for print, machining, or other manufacturing operations. The terms computer-aided drafting
(CAD) and computer aided design and drafting (CADD) is also used.
B. TECH MECHANICAL ENGG 19
FOURESS ENGINEERING India. PVT Ltd 2022
INTERNSHIP OUTCOMES
• From the month-long experience interning at Fouress engineering, we were able to learn a lot about
the working of the company in terms of how the nine production units are linked in their production
activities with one unit acting as an internal customer for another in addition to manufacturing
components for dispatch to external customers.
• We observed the manufacture of products including disc\ bodies, shaft, etc. which were
• The designs for these solutions were prepared in the Research & Development department who sent
the specifications through a drawing sheet to the concerned Production Unit for manufacture.