Professional Documents
Culture Documents
14
The longitudinal profile shall be checked using a 3 meter long straight edge and graduated wedge at
the middle of each traffic lane along a line parallel to the Centre line of the road. The transverse profile
shall be checked with adjustable template at intervals of 10 meters. For base with stone aggregate of
size 63 to 45 mm and 53 to 22.4 mm surface evenness to be as per Table 16.15.
TABLE 16.15
15 mm 10 mm
63-45 mm
and
53-22.4 mm 12 mm — 30 8 mm
The longitudinal profile shall be checked with a three metre long straight edge and graduated wedge
at the middle of each traffic lane along a line parallel to the centre line of the road. The transverse
profile shall be checked with adjustable templates at intervals of 10 metres.
16.7.14 Meaurements
The length and breadth shall be measured to the nearest centimetre. The depth of consolidated layer
shall be computed to nearest half centimetre by taking average of depths at the centre and at 30 cm
from the left and right edges at a cross section taken at 100 metre interval or less as decided by the
Engineer-in-Charge by making small pits. The consolidated cubical contents shall be calculated in cubic
metres correct to two places of decimal. The cubical contents shall be compared with net quantity of