Professional Documents
Culture Documents
com
Legal:
The content of this guide may not be sold, modified, or distributed in anyway without the expressed written
consent of the publisher. Reprinting, copying, or any other form of distribution for commercial or non-
commercial purposes is strictly prohibited and will be prosecuted.
Disclaimer:
Every attempt has been made to provide the most accurate information as possible. However, the publisher
accepts no liability for any wrong information as a result of purchasing and / or reading this guide.
You can follow this guide at your own risk the publisher accepts no responsibility for any injury to any person.
Copyright © www.Construct101.com
All rights reserved
ISBN-13:
ISBN-10:
Cut two boards to 8″ x 12″ for the sides (A), cut as shown on drawing above.
Cut four boards to 2″ x 14 1/2″ for the tray sides and top supports (B).
Pre-drill holes and assemble the tray as shown on drawing above using 2″ deck screws.
Attach the tray (B,C) and top supports (B) to the sides (A). Pre-drill holes and assemble as shown on
drawings above using 2″ deck screws.
Cut one board to 11 1/4″ x 18″ for the top (D). Round corners and smooth out edges.
Pre-drill holes and attach top (D) as shown on drawing above using 2″ deck screws. Front, back, and
sides, will have an overhang.