Professional Documents
Culture Documents
com
Legal:
The content of this guide may not be sold, modified, or distributed in anyway without the expressed written
consent of the publisher. Reprinting, copying, or any other form of distribution for commercial or non-
commercial purposes is strictly prohibited and will be prosecuted.
Disclaimer:
Every attempt has been made to provide the most accurate information as possible. However, the publisher
accepts no liability for any wrong information as a result of purchasing and / or reading this guide.
You can follow this guide at your own risk the publisher accepts no responsibility for any injury to any person.
Copyright © www.Construct101.com
Overview
Material List
Shopping List
• 5 – 2×4 – 8ft.
• 1 – 2×6 – 8ft.
• 5 – 1×4 – 8ft.
• 2 – 1×6 – 8ft.
• 2in. deck screws
• 2-1/2in. deck screws
• exterior wood glue
Cutting List
• (A) – 2 – 2×4 – 23in.
• (B) – 1 – 2×6 – 61in.
• (C) – 2 – 2×4 – 23-1/4in.
• (D) – 2 – 2×4 – 24-3/4in. (15-degree angle cut on both end in same
direction)
• (E) – 1 – 2×4 – 58in.
• (F) – 4 – 2×4 – 20-3/8in. (15-degree angle cut on one end)
• (G) – 4 – 2×4 – 23in. (15-degree angle cut on one end)
• (H) – 2 – 2×4 – 13-1/2in.
• (I) – 2 – 2×4 – 17in.
• (J) – 10 – 1×4 – 20-1/2in
• (K) – 10 – 1×4 – 19in.
• (L) – 5 – 1×6 – 25in.
Assemble as shown on drawing above, use exterior wood glue, pre-drill holes
and screw 2-1/2 inch deck screws through the back supports (G), into the
seat supports (F) and arm supports (C).