Professional Documents
Culture Documents
MACHINE DRAWING
LAB MANUAL
(ETTE-259)
Course Outcome:
List of Experiments:
UNIT – I
Theory of Dimensioning & BIS Convention: Element of Dimensioning, Chain Dimensioning, Parallel Dimensioning,
Coordinate Dimensioning, Dimensioning of the Common Features such as Diameter, Radii, Arcs, Angles, chamfers, etc.
Conventional representation of Threads and threads parts, springs, Gears, Welded and riveted joints, Threaded fasteners,
Sectional views and sectioning convention and other common features.
[T1,T2][No. of Hrs. 10]
Unit – II
Theory of Tolérances & Surface Charatersictics: Some basic définition, Tolérances including the grade and application,
different types of tolerance, Fundamental Deviation, Fits and its types, basis and sélection. Basic terminology of GD&T,
Tolerance characteristics and symbols Surface texture symbols & Surface lay indication.
[T1,T2][No. of Hrs. 10]
Unit - III
Different Fastening Arrangement and Joints: various threads profiles bolt variety of foundation Bolts such as Hoop Bolt,
Lewis Bolt, Rag Bolt, Keyed Joints, Cotter Joints, Knuckle Joints, Rigid coupling and flexible coupling.
[T1,T2][No. of Hrs. 10]
Unit-IV
Assembly drawing of plumber block, Tool Post, tool holder, Tail stock, etc. Tool head and clapper box of shapper, Hand
drill.
A significant part of the drawing work should be done using CAD package (e.g., Autodesk, Solid Work, Pro-E etc).
[T1,T2][No. of
Hrs. 13]
Text Books:
[T1] Textbook of Machine Drawing by Er R.K. Dhawan S.Chand Publications
[T2] Machine Drawing by Basudeb Bhattacharyya OXFORD University Press
Reference Books:
[R1] Machine Drawing by N.Sideshwer, P. Kannaiaha, V.V.S. Sastry, Tata McGraw Hill Education
[R2] Machine drawing by N.D.Bhatt (Charotar Publications).
[R3] Machine drawing by P.S.Gill (S.K. Kataria & Sons)
Note: You must bring any book on Machine Drawing as mentioned in syllabus.
(Not the book on Machine Design)
SKETCH NO. 1
SKETCH NO.2
SKETCH NO.3
Sketch-4
Q.1: Find & draw the actual size, tolerance and deviations for hole & shaft and identify
the type of Fit for the following data:
1. 45 H8/f7
2. 50 H7/p6
3. 75 H6/k5
SHEET NO.1
t = 10mm
t1 = 0.7t
By unwin
formula
D = 6√t
To
D = 7√t
t = 10mm, t1 = 0.7t
By unwin formula
D = 6√t to 7√t
SHEET NO.2
Take P = 40mm
Take D =
20mm
Across corners
= 2D
Across flats =
1.5D+3mm
Height of Nut
= 0.9D
Take D =
24mm
dc =
D/1.2
Or
dc =
0.84D
Take D = 24 mm
SHEET NO.3
SHEET NO.4
SHEET NO.5
SHEET NO.6
SHEET NO.7
SHEET NO.8