Professional Documents
Culture Documents
U2 Sealers EN
U2 Sealers EN
org
Course by En•Concreto
TECHNICAL
SPECIFICATIONS
OF SEALERS
Brands and generic names of the products.
Additional Resources – En•Concreto domestika.org
DESCRIPTION
Vinyl adhesion promoters to add to adhesives, mortar, binders, slurries
and textured surfaces; as well as a sealer for concrete surfaces or plaster
to put on putty, stucco, plaster or textured surfaces.
1. Put water in a container 2. Add a 20 Kg sack of 3. Mix well until you get a 4. Let the mix rest for 10
along with Glue and Pegaduro Product homogeneous paste, without minutes. Stir it again and use
Pegaduro Sealer any lumps it. Don’t add any more water.
100% ACRYLIC ADDITIVE • Perfect for binding on flat ground and to improve binding when
TYPE OF SEALER RECOMMENDED FOR REINFORCING THE MIX AND installing low or zero absorption coatings, like glass, porcelain and
MAKING REPAIRS
marble.
• It can also be used to seal walls and roofs.
DESCRIPTION:
This is a 100% acrylic additive to use with cement-based mortars. It APPLICATION
enhances the physical properties of the product that it’s mixed with, Shake the product before use, add it to the mortar slowly, and mix it to
adding more adhesion and strength. keep lumps from forming. After, add the right amount of water until a
thick uniform paste forms. Let it sit for 5 minutes, mix it again without
ADVANTAGES adding more liquid and so it’s ready to use. Use the same amount of
Adds strength and hardness to different mortars increasing the adhesion water and Duracril Perdura in each mix that you prepare. The amount of
of the mix. Minimizes the contraction / expansion of the materials and Duracril Perdura required in the mix varies depending on the needs.
improves water resistance.
USES
• As an additive to mortar, concrete, adhesive, stucco, slurry and binder
mixes.
• To bind new concrete to old concrete, in mixes with adhesives.
WATER-BASED SILICONE COATING • Allows the surface to breathe and frees retained water vapor
• Stops saltpeter from forming (efflorescence)
TYPE OF SEALER RECOMMENDED FOR FINAL PROTECTION • Reduces corrosion, chipping and damage due to freezing and
unfreezing
FINISH: • Easy to apply
Natural finish, transparent • Interior and exterior use on horizontal and vertical concrete and
masonry surfaces without finishes like: concrete, brick, mosaics, tile,
WHERE ITS USED aggregates, pavers, stone and cement
Interior and exterior use on horizontal and vertical concrete and
masonry surfaces without finishes like: concrete, brick, mosaics, tile,
aggregates, pavers, stone and cement.
KEY BENEFITS:
• Impregnating water-based silicone covering
• Forms a barrier on the surface that keeps the water out
• Keeps water from getting in, salt and fungus
• High penetration sealer, up to 12 mm
• Transparent finish that doesn't change the appearance of the
substrate