Professional Documents
Culture Documents
ERR
+
D
- O1
A
Micro-
controller Adjustment
Output range
DC
Output register
RTU I/O bus
DC
RAM
+
D
- O2
Flash A
Adjustment
Output range
IOC
+
UE -
Characteristics
Analog outputs
The module 520AOD01 is able to process the following types Power supply input
of signals:
The required power for the module is supplied via the RTU520 I/
– analog setpoint commands
O bus connector. In addition 24 V DC (UE) is required (e. g. from
– floating point setpoint commands
560PSU40/41). This voltage UE has to be supplied from external
The following output ranges can be configured independent per and wired to the UE connector.
channel by on-board switches:
I/O controller (IOC)
– ± 2.5 mA – ± 1.25 V DC
– ± 5 mA – ± 2.5 V DC The micro-controller on the module processes all time critical
– ± 10 mA – ± 5 V DC tasks of the parameterized processing functions. Moreover it
– ± 20 mA (4... 20 mA) – ± 10 V DC carries out the interactive communication with the RTU I/O bus.
All configuration data and processing parameters are loaded by
The output format unipolar, bipolar or live zero (4 … 20 mA) can the communication unit via the RTU I/O bus.
be configured by software parameters.
In connection with an I/O adapter (e. g. 520ADD01) or the
RTU520 communication unit the module is interfaced to the
RTU520 I/O bus.
Weight 0.13 kg
In addition to the RTU500 series general technical data, the fol-
lowing applies:
Connection type
Temperature drift (0... 70 °C) < 200 ppm/K Electrostatic discharge 8 kV air (level 3) / 4 kV contact (level 2)
IEC 61000-4-2 Performance criteria A
Surge 2 kV (level 3)
Current consumption for power supplied via WRB bus IEC 61000-4-5 Performance criteria A
5 V DC 25 mA
Conducted Disturbances, induced by 10 V (level 3)
15 V DC -- Radio-Frequency Fields Performance criteria A
IEC 61000-4-6
18 V DC --
Damped oscillatory wave 2.5 / 1 kV (level 3)
24 V DC --
IEC 61000-4-18 Performance criteria A
Signaling by LEDs
Housing type Plastic housing (V-0), IP20, RAL 7035 Relative humidity 5 ... 95 %
light gray EN 60068-2-30 (non condensing)
68128 Mannheim, Germany poses and shall in no respect be binding. The Brochure does not claim to be ex-
haustive. Technical data in the Information are only approximate figures. We re-
www.abb.com/substationautomation serve the right at any time to make technical changes or modify the contents of
this document without prior notice. The user shall be solely responsible for the
use of any application example or information described within this document.
The described examples and solutions are examples only and do not represent
any comprehensive or complete solution. The user shall determine at its sole
discretion, or as the case may be, customize, program or add value to the ABB
products including software by creating solutions for the end customer and to
assess whether and to what extent the products are suitable and need to be ad-
justed or customized.
ABB AG reserves all rights in particular copyrights and other intellectual property
rights. Any reproduction, disclosure to third parties or utilization of its contents -
in whole or in part - is not permitted without the prior written consent of ABB AG.