Professional Documents
Culture Documents
The MC1723C is a positive or negative voltage regulator designed to
deliver load current to 150 mAdc. Output current capability can be increased
to several amperes through use of one or more external pass transistors.
MC1723C is specified for operation over the commercial temperature range VOLTAGE REGULATOR
(0° to +70°C).
• Output Voltage Adjustable from 2.0 Vdc to 37 Vdc SEMICONDUCTOR
• Output Current to 150 mAdc Without External Pass Transistors TECHNICAL DATA
• 0.01% Line and 0.03% Load Regulation
• Adjustable Short Circuit Protection
6.2V
Vz
9
D SUFFIX
6.2V PLASTIC PACKAGE
15k
CASE 751A
15k
10 (SO–14)
VO
100 13
Compensation
5.0pF
30k 6.2V 2 Current
ORDERING INFORMATION
300 Limit
5.0k 20k 150 Operating
Current Temperature
6 Vref 5 7 VEE 4 3 Sense Device Alternate Range Package
5 C1 100pF
13 10k
VO ^7 R1 + R2
R2
Vsense
ISC =
RSC
=
0.66
RSC
at TJ = + 25°C
7
ELECTRICAL CHARACTERISTICS (TA = +25°C, Vin 12 Vdc, VO = 5.0 Vdc, IL = 1.0 mAdc, RSC = 0, C1 = 100 pF, Cref = 0 and divider
impedance as seen by the error amplifier ≤ 10 kΩ connected as shown in Figure 2, unless otherwise noted.)
Characteristics Symbol Min Typ Max Unit
Input Voltage Range VI 9.5 – 40 Vdc
Output Voltage Range VO 2.0 – 37 Vdc
Input–Output Voltage Differential VI–VO 3.0 – 38 Vdc
Reference Voltage Vref 6.80 7.15 7.50 Vdc
Standby Current Drain ( IL = 0, Vin = 30 V) IIB – 2.3 4.0 mAdc
Output Noise Voltage (f = 100 Hz to 10 kHz) Vn µV(RMS)
Cref = 0 – 20 –
Cref = 5.0 µF – 2.5 –
Average Temperature Coefficient of Output TCVO – 0.003 0.015 %/°C
Voltage (Tlow < TA < Thigh)
RTH = 150°C/W
160 PSTANDBY 60 mW
(No heatsink) 0
120
TA = + 25°C
TA = + 25°C –0.05
80 TA = –55°C
–0.1
40 TA = + 75°C TA = + 125°C
TA = + 125°C
0 –0.15
0 10 20 30 40 0 20 40 60 80 100
Vin–Vout, INPUT–OUTPUT VOLTAGE (V) IO, OUTPUT CURRENT (mA)
1.0
LIMITING CURRENT (mA)
0.4 TA = + 125°C
TA=+25°C 0.5 80
0.2
TA = –55°C Limit Current RSC = 10 Ω
0 0.4 40
0 20 40 60 80 100 –50 0 50 100 150
IO, OUTPUT CURRENT (mA) TJ, JUNCTION TEMPERATURE (°C)
Figure 10. Line Regulation as a Function Figure 11. Load Regulation as a Function
of Input–Output Voltage Differential of Input–Output Voltage Differential
0.2 0.1
∆Vin = +3 V IL = 1.0 to IL = 50 mA
0.1 0
0 –0.1
–0.1 –0.2
5.0 15 25 35 0 10 20 30 40 50
Vin–Vout, INPUT–OUTPUT VOLTAGE (V) Vin–Vout, INPUT–OUTPUT VOLTAGE (V)
3.0 2.0
2.0 2.0 0
TA = +25°C
Output Voltage
1.0 0
TA = +125°C
0 –2.0
10 20 30 40 –5.0 0 10 20 30 40 45
Vin, INPUT VOLTAGE (V) t, TIME (µs)
Z O , OUTPUT IMPEDANCE ( Ω )
CI = 0
0
LOAD DEVIATION (mA)
1.0
2.0
CI = 1.0 µF
0
–8.0 0.01
–5.0 0 10 20 30 40 45 100 1.0 k 10 k 100 k 1M
t, TIME (µs) f, FREQUENCY (Hz)
Figure 16. Typical Connection for 2 < VO < 7 Figure 17. Foldback Connection
12 10 RSC 12 10 RSC
+Vin Vout + Vin Vout
11 2 11
RA
3 2
MC1723C R1
6 6 10k
R1 R3
4 MC1723C
4
5
5 13 100pF
13
Cref R2 1000pF
7
R2
Vout 3
7
VO ^7 R2
R1 + R2 ISC =
Vsense
RSC
^ 0.66
RSC at TJ = + 25°C
a Vsense Iknee
ISC Iknee RA = 10 kΩ where a = –1
For best results 10 k < R1 +R2 < 100 k 1–a VO ISC
For minimum drift R3 = R1 R2 IL
Vsense
RSC = (1– ) I
a SC
Figure 18. +5.0 V, 1.0 A Switching Regulator Figure 19. +5.0 V, 1.0 A High Efficiency Regulator
Vin1 Vout
2N4918 or Equiv 1mH
+6.5V
0.33 +5.0V
1N4001 0.1µF
11 or Equiv Vin2 12
+10V
100 12 Vout 10
Vin
+10V 10 10 +5V 11 2
6
MC1723C 6 MC1723C 3
2 2.0k
1.0M 3 4
2.2k +
100µF 5
1.0k 4 –
5.1k 13
5
7 1000pF
0.1µF 5.1k 7
Figure 20. +15 V, 1.0 A Regulator with Remote Sense Figure 21. –15 V Negative Regulator
0.33
12 10
2N3055 or Equiv
11
Vin 12 10
+20V 4 12k
11 2
6 MC1723C +
3 +
100pF Vref 10µF
MC1723C –
5
0.1µF 6 4 12k + Sense Vout
+ 13 10k
5 100pF +15V Vref 7
– –
13 10k Load Vout = –15 V
7 V2 = 14V
2N3055
– Sense
Vin = –20 V or Equiv
2N3791
or Equiv
Vin
+18V Vout = +12 V
0.33
11
100 10
12 2
MC1723C 3
6 4 10k
100pF
5 13 12k
A INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.715 0.770 18.16 19.56
F L B 0.240 0.260 6.10 6.60
C 0.145 0.185 3.69 4.69
D 0.015 0.021 0.38 0.53
C F 0.040 0.070 1.02 1.78
G 0.100 BSC 2.54 BSC
H 0.052 0.095 1.32 2.41
N J J 0.008 0.015 0.20 0.38
K 0.115 0.135 2.92 3.43
SEATING L 0.300 BSC 7.62 BSC
PLANE K M 0_ 10_ 0_ 10_
H G D M N 0.015 0.039 0.39 1.01
D SUFFIX
NOTES:
PLASTIC PACKAGE 1. DIMENSIONING AND TOLERANCING PER
–A– CASE 751A–03 ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
(SO–14) 3. DIMENSIONS A AND B DO NOT INCLUDE
14 8 ISSUE F MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
–B– P 7 PL 5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
1 7
0.25 (0.010) M B M
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
G MILLIMETERS INCHES
R X 45 _ F DIM MIN MAX MIN MAX
C A 8.55 8.75 0.337 0.344
B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
–T– D 0.35 0.49 0.014 0.019
J F 0.40 1.25 0.016 0.049
SEATING D 14 PL K M G 1.27 BSC 0.050 BSC
PLANE
J 0.19 0.25 0.008 0.009
0.25 (0.010) M T B S A S
K 0.10 0.25 0.004 0.009
M 0_ 7_ 0_ 7_
P 5.80 6.20 0.228 0.244
R 0.25 0.50 0.010 0.019
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola
was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax: RMFAX0@email.sps.mot.com – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
– http://sps.motorola.com/mfax/ 852–26629298
HOME PAGE: http://motorola.com/sps/
8 ◊ MC1723C/D
MOTOROLA ANALOG IC DEVICE DATA