Professional Documents
Culture Documents
X32310 Y32310 Metric
X32310 Y32310 Metric
Timken Part Number X32310 - Y32310, Tapered Roller Bearings - TS (Tapered Single) Metric
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
RELATED PRODUCTS
RELATED PRODUCTS
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series 32310
1.8 Kg
Bearing Weight
4 lb
Dimensions
50.000 mm
d - Bore
1.9685 in
110.000 mm
D - Cup Outer Diameter
4.3307 in
40.000 mm
B - Cone Width
1.5748 in
33.000 mm
C - Cup Width
1.2992 in
42.250 mm
T - Bearing Width
1.6634 in
-14.2 mm
a - Effective Center Location3
-0.56 in
211000 N
C0 - Static Radial Rating
47500 lbf
Factors
K - Factor7 1.69
radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
33.000
3.6
40.000
110.000
50.000
103.9
95.0
59.9
65.0
-14.2
METRIC UNITS
ISO Factor - e 0.35
ISO Factor - Y 1.74 X32310 - Y32310
Bearing Weight 1.8 kg TS BEARING ASSEMBLY
Number of Rollers Per Row 14
Effective Center Location -14.2 mm
K Factor 1.69
Dynamic Radial Rating - C90 48400 N
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 28600 N
NORTH CANTON, OHIO USA Static Radial Rating - C0 211000 N
Dynamic Radial Rating - C1 187000 N
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY