Professional Documents
Culture Documents
Direction: Choose and shade the letter of the correct answer and write it on
the answer sheet provided.
___2. Which tool is used for removing insulation of medium sized wires
ranging from gauge #10 to gauge #16?
A. Long nose pliers C. Push pull rule
B. Screw driver D. Wire stripper
___ 3. Which pliers are the do-it-all pliers? They cut, twist wires together,
and grip wires for pulling.
A. Combination pliers A. Long nose
D. Screw drivers B. Wire stripper
___ 4. Which is referred to as the rate at which electrons flow past a point in
a complete electrical circuit?
A. Current C. Voltage
B. Resistance D. Watts
___ 5. Which material that offers very little resistance where electrons can
move easily? Ex: silver, copper, gold
A. Conductor C. Insulator
B. Electricity D. Voltage
___ 6. Which materials that present high resistance and restrict the flow of
electrons? Examples: Rubber and plastic.
A. Conductor C. Insulator
C. Current D. Resistance
___ 7. Which is a needle-shaped rod that moves over the scale of a meter?
A. Adjustment screw C. Scale
B. Pointer D. selector switch
B. Micrometer D. Voltmeter
___ 9. Which refers to a pocket- sized tool used to test the line wire or circuit
if there is a current in it?
A. Pull-push ruler C. Test Light
B. Ruler D. Wire gauge
___ 10. Which is referred to as a series of marking used for reading the value
of a quantity?
A. Adjustment screw C. Scale
B. Pointer D. Selector switch
___ 11. What measuring tool is used to measure the length of an object in
centimeter and inches?
A. Micrometer C. Test light
B. Pull-push rule D. Wire Gauge
___ 15. What is the value of current if the voltage is 220 and resistance is 10
ohms?
A. 22 amperes C. 2200 amperes
B. 2.2 amperes D. 0.22 amperes
___ 16. Which formula will you apply if you want to compute the voltage in a
circuit?
A. R = I / V C. V = I / V
B. V = I x R D. V = P / I
___ 17. It has cross tip resembling a positive (+) sign. It is used to drive
screws with cross slot heads. Which is described in the sentences?
A. Hammer C. Standard screw driver
B. Philips Screw D. Wire Stripper
___ 18. Which is a circuit protective device that automatically blows and
cuts the current when an overload or short circuit happens?
PLACER NATIONAL HIGH SCHOOL PNHS-FIRST QUARTER
Document Type: EXAM
Magsaysay, Placer, Surigao del Norte
School ID: 304837 Revision No.: 00
Email: 304837@deped.gov.ph Effective Date SY: 2022-2023
Page No. 3 of 1
A. Breaker C. Hammer
B. Fuse D. Screw Driver
___ 20. Which form is used to request for tools or equipment needed for a
particular job?
A. Borrower’s form C. Inventory
B. Job order or work order form D. Purchase requisition
___ 23. Which sign indicates that a person should observe extra awareness?
A. C.
B. D.
___ 24. Which symbol shows that any activity is not allowed as stated by the
symbol?
A. C.
B. D.
___ 25. Which symbol specifies hazardous situation which, if not avoided,
will result to a serious injury or even death?
A. C.
B. D.
___ 26. What is the electrical symbol of fuse?
A. C.
PLACER NATIONAL HIGH SCHOOL PNHS-FIRST QUARTER
Document Type: EXAM
Magsaysay, Placer, Surigao del Norte
School ID: 304837 Revision No.: 00
Email: 304837@deped.gov.ph Effective Date SY: 2022-2023
Page No. 4 of 1
B. D.
___ 27. Which is the electrical symbol of a Circuit Breaker?
A. C.
B. D.
___ 28. What is the electrical symbol of switch?
A. C.
B. D.
___ 29. Which formula will you apply if you want to compute the resistance
in a circuit?
A. R = V/I C. R = I x V
B. R = P x I D. R = I/V
___ 33. Which is a hazard that comes from heavy workloads and stress?
A. Biological hazard C. Physical
B. Chemical hazard D. Psychological hazard
___ 37. How do we use multi tester? According to current, voltage and
resistance
A. By putting a cable on the conductor.
B. By connecting a wire from end to end .
C. By using it as a cleaning tool in the workplace .
D. By setting it in a right direction
___ 40. Lack of personal cleanliness can affect your family’s health.
A. This is true based on the method of controlling hazard.
B. This is not true based on the method of hazard.
C. This is true according to the survey.
D. To develop our skills in dealing with other people
___ 41. What do you think are the causes of ergonomic hazard?
A. Heavy workloads and stress
B. Working for long period in an awkward position
C. Conflict with the employer
D. Poorly stored medical wastes
___ 42. Which method will you apply when general cleanliness is used in the
work place?
A. Administrative control C. Hazard control
B. Engineering control D. Risk assessment
___ 43. What is the relationship of stranded wire and solid wire?
A. Both of them are used in protecting circuits.
B. Both of them are used in fixing appliances.
C. Both of them are used in wiring installation.
D. Both of them are used in diagramming.
___ 44. Why is a project plan necessary before undertaking any project?
PLACER NATIONAL HIGH SCHOOL PNHS-FIRST QUARTER
Document Type: EXAM
Magsaysay, Placer, Surigao del Norte
School ID: 304837 Revision No.: 00
Email: 304837@deped.gov.ph Effective Date SY: 2022-2023
Page No. 6 of 1
___ 45. What is the best thing that you can do to make sure that the tool
you need is functional when you need it?
A. Make a good routine of maintenance for your tools.
B. Unlimited use of tools and materials
C. Make a checklist on the different tools.
D. Arrange the tools regularly.
___46. How would you prove that electrical materials are important?
A. Through electrical materials houses and appliances are properly
secured.
B. Through electrical materials we can save energy.
C. Through electrical materials we can gain additional income.
D. Through electrical materials we can do whatever we want.
___ 48. What would you recommend to support the Philippine Clean Air Act
of 1999?
A. Participate in various programs related to environmental
protection.
B. Focus primarily on the causes and effects of global warming.
C. Encourage the youth to be involved in sports.
D. Provide information about current issues.
Prepared by: