You are on page 1of 4

Domestic Refrigeration Air-Conditioning Servicing (DomRac-NC II)

1st Grading Exam. G-9 Mixed

Name:_______________________________ Grade & Section:________ Score_________


Teacher: Mr. Ernesto S. Divina date:_____
Test I: multiple choice:
Direction: Read the question. Choose the letter of
The correct answer and write your answer on the separate sheet of paper.
1. Who is a German scientist determine that there is a relationship between the voltage,
current and resistance?
A. George S. Ohm’s B. Alexander Volt C. Mary Carrie Ampere D. Plato
2. What is the unit of electromotive force?
A. V B. Ohm’s C. Volt D. Amp.
3. Which of the symbol of resistance?.
A. Amp. B. Volt C. Ohm’s D. Ω
4. It is the symbol of current.
A. A B. Volt C. Ohm’s D. Amp.
5. It is the unit of resistance.
A. Ω B. Volt C. Ohm’s D. Amp.
6. In parallel circuit, If the total voltage is 220v, What is the individual loads?
A. Increase B. Decrease C. Equal D. Defend each load
7. When the parallel circuit load one is defective, the other is.
A. Affected B. Open C. Cut Off D. Good
8. The total resistance of the parallel connection is
B. Lest than smallest load B. Equal load C. Greater load D. Constant load
9. It is the unit of resistance.
B. Ω B. Volt C. Ohm’s D. Amp.
10. It is possible to adjust zero position of the pointer.
A. Infinity knob B. Scale knob C. Selector switch D. Pointer
11. Which is possible to select different function and range of the meter?
A. Pointer B. Scale C. Range selector D. Selector switch
12. Positive and negative wire to connect the circuit to the electrical components being
tested.
A. Pointer B. Selector switch C. Range D. Test probes
13. What kind of electrical instrument that measures voltage, current and resistance
A. Multi-tester B. Voltmeter C. Ammeter D. All of the above
14. It is a series of marking used for reading the value of quantity.
B. Pointer B. Range C. Scale D. Selector switch
15. What materials should be stored in an orderly and secured manner?
A. Book &notebook B. chair & tables C. pipes & lumber D. paper & pencil
16. What is the place where jobs are accomplished?
A. Classroom B. shop room C. play yard D. workplace
17. A safe access shall be maintained to work areas ______should be avoided.
A. Extra rout B. multiple rout C. rub rout D. shortcut
18. Cleaning and keeping tools in proper order and function means_______.
A. Repairing B. servicing C. preventive maintenance D. troubleshooting
19. What is an unforeseen event that may result to injury?
A. Accident B. incident C. hazard D. related event
Tell whether the given statement about Air conditioning is True or False. Write (T) if
the statement is True, write (F) if the statement incorrect.
_______20. The function of voltage is to posh the current throughout the circuit?

_______21. Current is the opposition of the flow voltage and resistance?

_______22. What happen the circuit flow, if one is unknown, the circuit steel functioning?
_______23. If the voltage is decrease, the current flowing throughout the circuit also
decreased?
_______24. Wood is considered a good conductor of electricity?

Through this needle pointer find the following.

25. Range Rx1, What is the exact reading resistance?


A. 1.5 Ω B. 1.6 Ω C. 1.4Ω D. 1.8 Ω
26.Range Rx10, What is the exact reading resistance?
B. Amp. Ω B. Volt Ω C. 15 Ω D. 14Ω
27. Range Rx100, What is the exact reading resistance?
B. A. 140Ω B. 150 Ω C160 Ω D. 180 Ω
28.Range Rx1K, What is the exact reading resistance?
A.1.5KΩ B. 1.6KΩ C.1.4K Ω D. 1.8KΩ
29.Range R-10DCV, what is the exact reading Voltage?
A. 9.2DCV B. 9DCV C.9,3DCV D. 9.4DCVC
30.Range R-50DCV, what is the exact reading Voltage?
A. 46DCV B. 46.5DCV C. 47DCV D. 48DCV
Problem Solving : Find the FF.

V1, V2, V3, Vt , and Rt?

V1=?
It=1.75
A
Vt=?
V2=?
V3=?

31. How much voltage drop at load One?


A. 7.5V B. 0.175V C. 17.5V D. -8.25
32.How much voltage drop at load Two?
A. -13.25 B. 25.26V C. 0.166V D. 26.25V
33. How much voltage drop at load Three?
A. 52.5V B. 0.007V C. 5.25V D. 31.75V
34.What is the total voltage flowing to the entire circuit?
A. 95.26V B. 90V C. 96.25V D. 100V
35.What is the current drop in load three?
A. 1.75 Amp. B. 8Amp. C. 3Amp. D. 10Amp

PARALLEL CIRCUIT

120v

12Ω 15 Ω 18Ω

36.What is the current drop in load One?


B. 0.1 Amp. B. 1440 Amp. C.10 Amp. D. -108Amp.
37.What is the current drop in load Two?
C. 135Amp. B.105 Amp. C.1800 amp. D.8 Amp.
38.What is the current drop in load Three?
A. 6.66 Amp. B.102 Amp. C.138 Amp. D. 2169 Amp.
39.What is the voltage drop in load Two?
A. 100V. B. 110V. C. 120V. D. 220V.
40.What is the total current in the entire circuit?
A. 24.66Amp. B. 30Amp. C. 25Amp. D. 40amp.

You might also like