Professional Documents
Culture Documents
Communication
- English version - Deutsche Version: ab Seite 5 -
Front interface
Physical connection
USB-A
D-Sub 9 socket
DIGSI 5 protocol x x x x
IRIG-B, DCF77, High-precision pulse per second x
IEC 60870-5-104 x x
Modbus TCP x x
DNP 3 serial x x x x
PROFINET IO x x
Energy Automation
11.2016
Page 1 of 8
SIPROTEC 5
Communication
- English version - Deutsche Version: ab Seite 5 -
Note:
The plug-in module types USART and ETH can be used in the plug-in module positions E and F
in the base module and in the plug-in module positions N and P in the expansion module CB202.
They are not suitable for the plug-in module position M in the expansion module CB202.
Energy Automation
11.2016
Page 2 of 8
SIPROTEC 5
Communication
- English version - Deutsche Version: ab Seite 5 -
Table 2: Additional plug-in modules for applications with Protection interface (direct fibre
connection)
Physical connection
1 x optic serial, 1300 nm, LC duplex connector,
24 km over 9/125 μm singlemode – fiber, 4 km over
62,5/125 μm multimode – fiber
2 x optic serial, 1300 nm, LC duplex connector,
24 km over 9/125 μm singlemode – fiber, 4 km over
62,5/125 μm multimode – fiber
1 x optic serial, 1300 nm, LC duplex connector,
60 km over 9/125 μm singlemode – fiber
2 x optic serial, 1300 nm, LC duplex connector,
60 km over 9/125 μm singlemode – fiber
1 x optic serial,1550 nm, LC duplex connector,
100 km over 9/125 μm singlemode – fiber
2 x optic serial, 1550 nm, LC duplex connector,
100 km over 9/125 μm singlemode – fiber
1 x optic serial, bidirectional via 1 common fiber,
1300 nm/1550 nm (Tx/Rx), LC simplex connector,
40 km over 9/125 μm singlemode – fiber 1)
1 x optic serial, bidirectional via 1 common fiber,
1550 nm/1300 nm (Tx/Rx), LC simplex connector
40 km over 9/125 μm singlemode – fiber 2)
2 x optic serial, bidirectional via 1 common fiber,
1300 nm/1550 nm (Tx/Rx), 2 x LC simplex connector,
40 km over 9/125 μm singlemode – fiber 3)
2 x optic serial, bidirectional via 1 common fiber,
1550 nm/1300 nm (Tx/Rx), 2x LC simplex connector,
40 km over 9/125 μm singlemode – fiber 4)
Application
Protection interface x x x x x x x x x x
1)
USART-AH-1LDFO only in conjunction with USART-AJ-1LDFO or USART-AY-2LDFO at the remote end
2)
USART-AJ-1LDFO only in conjunction with USART-AH-1LDFO or USART-AX-2LDFO at the remote end
3)
USART-AX-2LDFO only in conjunction with USART-AJ-1LDFO or USART-AY-2LDFO at the remote end
4)
USART-AY-2LDFO only in conjunction with USART-AH-1LDFO or USART-AX-2LDFO at the remote end
Note:
The plug-in module type USART can be used in the plug-in module positions E and F in the base
module and in the plug-in module positions N and P in the expansion module CB202. It is not
suitable for the plug-in module position M in the expansion module CB202.
Energy Automation
11.2016
Page 3 of 8
SIPROTEC 5
Communication
- English version - Deutsche Version: ab Seite 5 -
Physical connection
Note:
The plug-in module types ANAI and ARC can be used in both plug-in module positions in the
base module (ports E and F) and in all plug-in module positions in the expansion module CB202
(ports M, N and P).
Energy Automation
11.2016
Page 4 of 8
SIPROTEC 5
Kommunikation
- Deutsche Version -
Modultyp: USART-AD-1FO
Modultyp: USART-AE-2FO
Modultyp: USART-AC-2EL
Modultyp: USART-AB-1EL
Modultyp: ETH-BB-2FO
Modultyp: ETH-BA-2EL
Frontschnittstelle
Port oder Steckmodul:
Physikalischer Anschluss
USB-A
D-Sub 9 Buchse
1 x elektrisch Ethernet 10/100 Mbit/s, RJ45
1 x elektrisch seriell RS485, RJ45
2 x elektrisch seriell RS485, RJ45
1 x optisch seriell, 820 nm, ST-Stecker, 1,5 km über 62,5/125 μm
Multimode – Fasern
2 x optisch seriell, 820 nm, ST-Stecker, 1,5 km über 62,5/125 μm
Multimode – Fasern
2 x elektrisch Ethernet 100 Mbit/s, RJ45, 20 m
2 x optisch Ethernet 100 Mbit/s, 1300 nm, LC-Duplex Stecker,
2 km über 50/125 μm oder 62,5/125 μm Multimode – Fasern
Anwendungen
DIGSI 5 Protokoll x x x x
x x
IEC 61850-8-1 Server (inklusive GOOSE, Reporting zu 6 Clients)
IEC 61850-8-1 Server (ohne GOOSE, Reporting zu 6 Clients) x
IEC 60870-5-104 x x
Modbus TCP x x
DNP 3 seriell x x x x
DNP 3 über Ethernet (DNP3 TCP) x x
PROFINET IO x x
RSTP (Ethernet-Ringredundanz) x x
SNMP V3 (Netzwerk-Management-Protokoll) x x
Energy Automation
11.2016
Seite 5 von 8
SIPROTEC 5
Kommunikation
- Deutsche Version -
Hinweis:
Die Steckmodule vom Typ USART und ETH sind auf den Steckplätzen E und F im Basismodul
sowie auf den Steckplätzen N und P im Erweiterungsmodul CB202 verwendbar. Sie sind nicht für
Steckplatz M im Erweiterungsmodul CB202 geeignet.
Energy Automation
11.2016
Seite 6 von 8
SIPROTEC 5
Kommunikation
- Deutsche Version -
Modultyp: USART-AH-1LDFO 1)
Modultyp: USART-AX-2LDFO 3)
Modultyp: USART-AY-2LDFO 4)
Modultyp: USART-AJ-1LDFO 2)
Modultyp: USART-AW-2LDFO
Modultyp: USART-AG-1LDFO
Modultyp: USART-AU-2LDFO
Modultyp: USART-AK-1LDFO
Modultyp: USART-AV-2LDFO
Modultyp: USART-AF-1LDFO
Steckmodul:
Physikalischer Anschluss
1 x optisch seriell, 1300 nm, LC-Duplex-Stecker, 24 km über
9/125 μm Singlemode – Fasern, 4 km über
62,5/125 μm Multimode - Fasern
2 x optisch seriell, 1300 nm, LC-Duplex-Stecker, 24 km über
9/125 μm Singlemode – Fasern, 4 km über
62,5/125 μm Multimode - Fasern
1 x optisch seriell, 1300 nm, LC-Duplex-Stecker, 60 km über
9/125 μm Singlemode – Fasern
2 x optisch seriell, 1300 nm, LC-Duplex-Stecker, 60 km über
9/125 μm Singlemode – Fasern
1 x optisch seriell, 1550 nm, LC-Duplex-Stecker, 100 km
über 9/125 μm Singlemode – Fasern
2 x optisch seriell, 1550 nm, LC-Duplex-Stecker, 100 km
über 9/125 μm Singlemode – Fasern
1 x optisch seriell, bidirektional über 1 LWL-Faser,
1300 nm/1550 nm (Tx/Rx), LC-Simplex-Stecker, 40 km über
9/125 μm Singlemode – Faser 1)
1 x optisch seriell, bidirektional über 1 LWL-Faser,
1550 nm/1300 nm (Tx/Rx), LC-Simplex-Stecker, 40 km über
9/125 μm Singlemode – Faser 2)
2 x optisch seriell, bidirektional über 1 LWL-Faser,
1300 nm/1550 nm (Tx/Rx), 2 x LC-Simplex-Stecker, 40 km
über 9/125 μm Singlemode – Faser 3)
2 x optisch seriell, bidirektional über 1 LWL-Faser,
1550 nm/1300 nm (Tx/Rx), 2x LC-Simplex-Stecker, 40 km
über 9/125 μm Singlemode – Faser 4)
Anwendung
Wirkschnittstelle x x x x x x x x x x
1)
USART-AH-1LDFO nur in Verbindung mit USART-AJ-1LDFO oder USART-AY-2LDFO auf der Gegenseite
2)
USART-AJ-1LDFO nur in Verbindung mit USART-AH-1LDFO oder USART-AX-2LDFO auf der Gegenseite
3)
USART-AX-2LDFO nur in Verbindung mit USART-AJ-1LDFO oder USART-AY-2LDFO auf der Gegenseite
4)
USART-AY-2LDFO nur in Verbindung mit USART-AH-1LDFO oder USART-AX-2LDFO auf der Gegenseite
Hinweis:
Die Steckmodule vom Typ USART sind auf den Steckplätzen E und F im Basismodul sowie auf
den Steckplätzen N und P im Erweiterungsmodul CB202 verwendbar. Sie sind nicht für
Steckplatz M im Erweiterungsmodul CB202 geeignet.
Energy Automation
11.2016
Seite 7 von 8
SIPROTEC 5
Kommunikation
- Deutsche Version -
Modultyp: ANAI-CA-4EL
Modultyp: ARC-CD-3FO
Steckmodul:
Physikalischer Anschluss
8-polige Schraub-Klemmleiste
Messumformer, 4 Eingänge, DC ± 20 mA x
Lichtbogenschutz x
Hinweis:
Steckmodule vom Typ ANAI und ARC sind auf beiden Steckplätzen im Basismodul (Ports E und
F) sowie auf allen Steckplätzen im Erweiterungsmodul CB202 (Ports M, N und P) verwendbar.
Energy Automation
11.2016
Seite 8 von 8