Professional Documents
Culture Documents
CHAPTER – 4
STEAM CONDENSERS & COOLING TOWER
1. Define steam condenser and write objectives of steam condenser.
2. Classify steam condenser and explain any one condenser with neat sketch.
3. Give difference between Jet condenser and Surface Condenser.
4. Explain following types of cooling tower with advantage and disadvantage.
a. Natural draft cooling tower
b. Hyperbolic cooling tower
c. Forced draft cooling tower
d. Induced draft cooling tower
CHAPTER – 5
AIR COMPRESSOR
1. Classify air compressor.
2. Differentiate between reciprocating and rotary air compressor.
3. Explain single stage reciprocating air compressor with neat sketch.
4. Differentiate between centrifugal and axial flow air compressor.
5. Write necessity and advantage of multistage compressor.
6. Write the application of Compressed Air
CHAPTER – 6
HEAT TRANSFER
1. Explain modes of heat transfer.
2. Differentiate between free convection and forced convection.
3. Define heat exchanger and classify heat exchanger.
4. Explain parallel flow and counter flow heat exchanger with neat sketch.
5. Explain shell and tube type heat exchanger with neat sketch.
6. Define following terms related to heat transfer:
a. Thermal conductivity
b. Logarithmic mean temperature difference (LMTD)
c. Thermal insulation
d. Absorptivity
e. Reflectivity
f. Transmitivity
g. Emissivity
7. A furnace wall is made from fire bricks, concrete & cast iron respectively. And their
thickness 200mm, 35mm, & 20mm respectively. Also, it has a thermal conductivity
0.4W/mk; 1.8W/mk & 60 W/mk. The temperature difference between two side of wall
1150 K. then find heat loss per unit area of wall.
8. Explain Fourier’s law for heat conduction
9. Explain Stefan-Boltzman Law for heat radiation.
10. Explain parallel flow and counter flow heat exchanger with neat sketch.