Professional Documents
Culture Documents
4. __________________ are important man-made polymers (synthetic polymers). They are made up of
monomers obtained mainly from _______________ and ___________.
6 . The different types of plastics, their properties and uses are: (pgs.129-132)
Type of Plastic Properties Uses
Polyethylene Low density, soft, transparent,
(polyethene/ flexible
polythene)
High-density,___________
______________________
______________________
Polyvinyl chloride
(PVC) /
polychloroethene
Name:____________________________(____) Class: ___________ Date:___________
Type of Plastic Properties Uses
___________________________________________________________________________
____________________________________________________________________________
___________________________________________________________________________
____________________________________________________________________________
Name:____________________________(____) Class: ___________ Date:___________
CHP. 16 –NOTES
1. In the box, draw a circuit diagram of the electrical circuit below.
An electrical circuit
A circuit diagram
2. Current is ___________________________________________________________.
3. A ________________ is used to measure current. It is always connected in series with the
electrical component.(see below)
4. The SI unit for current is _____________.( ). A Smaller unit for current is ____________.
5.
1A=
10. When a voltmeter is connected across an electrical component it measures the __________
______________ (p.d.)
11. The potential difference is the amount of ___________________________________
________________________________________________________________.
13. A resistance is something that reduces the flow of current. The (higher/lower) the resistance the
(higher/lower) the current and vice versa.
14. A resistor had a fixed resistance while a ____________ has a variable resistance.
15. The resistance of an electrical component can be calculated by using the formula;
Resistance (R) =
17. The unit for resistance is ohm ( ). Larger unit for resistance is kiloohm (k).
18. To measure resistance, we need to connect an ammeter in _____________ with the electrical
componenet and a voltmeter in _____________ to the electrical component.