Professional Documents
Culture Documents
20 min
In this exercise you will create a new part, a thread/tap feature, reorder some features
according to the design intent, and modify feature properties. Detailed instructions
for this exercise are provided.
By the end of this exercise you will be able to:
Create a thread/tap
Reorder a feature
Change the properties of a feature
CATIA V5 Part Design - Thread and Tap
2 3
CATIA V5 Part Design - Thread and Tap
2
Create a pocket.Define a sketch
from below to extrude. 3
1
CATIA V5 Part Design - Thread and Tap
2
CATIA V5 Part Design - Thread and Tap
Threads and taps are not visually b. Select the following surface as the
represented in the 3D environment; lateral face.
however, the feature will appear in c. Select the following surface as the
the specification tree. limit face.
1
b
c
CATIA V5 Part Design - Thread and Tap
2
CATIA V5 Part Design - Thread and Tap
Exercise: Thread
Recap Exercise
10 min
In this exercise you will create a bolt and complete the exercise with the techniques
and tools you have already learned, without any detailed instructions.
25 min
You will practice what you learned by completing the case study model using
only a detailed drawing and hints as guidance.
In this exercise you will create the case study model. Recall the design intent of
this model:
R 25
R 36
140
R 10