Professional Documents
Culture Documents
CLIENT
CARE PVT LTD.
M/s SandBox NUETRACUETICAL R&D FACILITY
Engineering LOCATION: JEEDIPALLY, NEAR HYDERABAD DATE 12.10.2021
Services PROJECT NO: 2103 DOC. NO CM1-M.Q-01.01
DOCUMENTS TITLE:- SUMMARY
SUPPLY
INSTALLATION (Rs.)
SR. NO. DOCUMENT TITLE (Rs.)
1 SS304 PIPE AND PIPE FITTINGS BOQ 0.00 0.00
2 CS (ERW) [CSE] PIPE AND PIPE FITTINGS BOQ
3 GALVANIZED IRON [GI] PIPE AND PIPE FITTINGS BOQ - -
4 CPVC PIPE AND PIPE FITTINGS BOQ - -
5 HOT & COLD INSULATION BOQ - -
6 STRUCTURAL SUPPORT - -
7 BOQ FOR MODIFICATION - -
8 MISCELLANEOUS BOQ - -
9 LIFTING & SHIFITING BOQ - -
10 VALVES BOQ - -
TOTAL - -
TOTAL OF SUPPLY + INSTALLATION -
BILL OF QUANTITY OF SS 304 Piping
CLIENT : M/s SARVOTHAM CARE PVT LTD.,
NUETRACUETICAL R&D FACILITY
LOCATION: JEEDIPALLY, NEAR HYDERABAD DATE :12.10.2021
PROJECT NO: 2103 DOCUMENT NO :CM1-M.Q-02-01
Bill Of Quantity Of SS Piping SUPPLY ERECTION
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) QTY R Unit QTY R Unit
CA WATER N2 QTY Rate Amount Rate Amount
1 Pipes (in Mtrs) Stainless steel welded pipes, material to ASTM A 312 TP 15 0.5 126 74 200 200 Meter - 100.00 Inch Meter -
304 Sch. 40S, dimensions to ANSI B 36.19, plain ends. 20 0.75 0 0 Meter - 0.00 Inch Meter -
25 1 0 0 Meter - 0.00 Inch Meter -
32 1.25 0 0 Meter - 0.00 Inch Meter -
Stainless steel welded pipes, material to ASTM A 312 TP 40 1.5 0 0 Meter - 0.00 Inch Meter -
304 Sch. 10S dimensions to ANSI B 36.19 BE to ANSI 16.25 50 2 0 0 Meter - 0.00 Inch Meter -
65 2.5 0 0 Meter - 0.00 Inch Meter -
Note: All pipies inside clean room shall be external polished to Grit-
80 3 0 0 Meter - 0.00 Inch Meter -
220
TOTAL
0 0 - -
2 Flanges Slip On Type flanges,Serrated Finish,Raised face 15 0.5 63 37 100 100 Nos. - 50.00 Inch Dia -
material ASTM A 240 Gr. 304, Dimensional Suitability to 20 0.75 0 0 Nos. - 0.00 Inch Dia -
ANSI B 16.5 / ASTM A 182 F 304, ASME B16.5; ASA 150# 25 1 0 0 Nos. - 0.00 Inch Dia -
With gaskets,nuts, bolts and washer 32 1.25 0 0 Nos. - 0.00 Inch Dia -
40 1.5 0 0 Nos. - 0.00 Inch Dia -
50 2 0 0 Nos. - 0.00 Inch Dia -
65 2.5 0 0 Nos. - 0.00 Inch Dia -
TOTAL
0 0 - -
3 Flanges blind Slip On Type flanges,Serrated Finish,Raised face 15 0.5 0 0 Nos. - 0.00 Inch Dia -
material, A 182 F-304 or A-403 WP304, ERW, Sch. 40s, 20 0.75 0 0 Nos. - 0.00 Inch Dia -
Dimensional Suitability to ANSI B 16.5; ASA 150# 25 1 0 0 Nos. - 0.00 Inch Dia -
With gaskets,nuts, bolts and washer 32 1.25 0 0 Nos. - 0.00 Inch Dia -
40 1.5 0 0 Nos. - 0.00 Inch Dia -
50 2 0 0 Nos. - 0.00 Inch Dia -
65 2.5 0 0 Nos. - 0.00 Inch Dia -
80 3 0 0 Nos. - 0.00 Inch Dia -
TOTAL 0
0 0 - -
2 TC Flanges TC Flanges of SS 304 15 0.5 0 0 Nos. - 0.00 Inch Dia -
20 0.75 0 0 Nos. - 0.00 Inch Dia -
25 1 0 0 Nos. - 0.00 Inch Dia -
32 1.25 0 0 Nos. - 0.00 Inch Dia -
40 1.5 0 0 Nos. - 0.00 Inch Dia -
50 2 0 0 Nos. - 0.00 Inch Dia -
65 2.5 0 0 Nos. - 0.00 Inch Dia -
80 3 0 0 Nos. - 0.00 Inch Dia -
TOTAL
0 0 - -
4 Elbows 90º A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickness to 15 0.5 0 0 Nos. - 0.00 Inch Dia -
Long radius match with pipe thickness. Dimension as per ANSI B 16.11 / 20 0.75 0 0 Nos. - 0.00 Inch Dia -
(R-1.5D) ASME B 16.9 25 1 0 0 Nos. - 0.00 Inch Dia -
32 1.25 0 0 Nos. - 0.00 Inch Dia -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 40 1.5 0 0 Nos. - 0.00 Inch Dia -
pipe thickness. Dimension as per ANSI B 16.11 50 2 0 0 Nos. - 0.00 Inch Dia -
65 2.5 0 0 Nos. - 0.00 Inch Dia -
80 3 0 0 Nos. - 0.00 Inch Dia -
TOTAL 0
TOTAL
0 0 - -
9 Nipple, Two End SS 304, material is ASTM A 240 Gr. 304 to BSPP (M), 6" long 15 0.5 32 19 51 51 Nos. - 25.50 Inch Dia -
Threaded 20 0.75 0 0 Nos. - 0.00 Inch Dia -
25 1 0 0 Nos. - 0.00 Inch Dia -
40 1.5 0 0 Nos. - 0.00 Inch Dia -
TOTAL
0 0 - -
10 Nuts & Bolts ASTM A193 Gr.B8 BOLTS & A194 Gr.8 M14X55 252 148 400 400 Nos. - 400.00 Nos. -
0 0 - -
24 Temperature sensor NA 15 0.5 0 0 Nos. - 0.00 Nos. -
20 0.75 0 0 Nos. - 0.00 Nos. -
25 1 0 0 Nos. - 0.00 Nos. -
32 1.25 0 0 Nos. - 0.00 Nos. -
TOTAL
0 0 - -
Air filter regulator with lubricator; screwed end; with dial presure
AFRL 15 0.5 0 0 - 0.00 -
33 gauge on top; with 0.2 micron filter of SS MOC Nos. Inch Dia
20 0.75 0 0 Nos. - 0.00 Inch Dia -
25 1 0 0 Nos. - 0.00 Inch Dia -
40 1.5 0 0 Nos. - 0.00 Inch Dia -
TOTAL
0 0 - -
Air filter regulator; screwed end; with dial presure gauge on top; with
AFR 15 0.5 0 0 - 0.00 -
34 0.2 micron filter of SS MOC Nos. Inch Dia
20 0.75 0 0 Nos. - 0.00 Inch Dia -
25 1 0 0 Nos. - 0.00 Inch Dia -
40 1.5 0 0 Nos. - 0.00 Inch Dia -
TOTAL
0 0 - -
35 AR Air regulator screwed end 15 0.5 0 0 Nos. - 0.00 Inch Dia -
20 0.75 0 0 Nos. - 0.00 Inch Dia -
25 1 0 0 Nos. - 0.00 Inch Dia -
50 1.5 0 0 Nos. - 0.00 Inch Dia -
TOTAL
0 0 - -
36 FLEXIBLE HOSE NA 15 0.5 0 0 Nos. - 0.00 Inch Dia -
Grand Total 0 0
15 NB Nos.
20 NB Nos.
25 NB Nos.
ELBOW 32 NB Nos.
CPVC- 90° Elbow
40 NB Nos.
50 NB Nos.
65 NB Nos.
80 NB Nos.
15x15 NB Nos.
20x20 NB Nos.
25x25 NB Nos.
EQUAL TEE 32x32 NB Nos.
Equal tee as per IS 1239 (CPVC .)
Part II 40x40 NB Nos.
50x50 NB Nos.
65x65 NB Nos.
80x80 NB Nos.
100x100 NB Nos.
20 X 15 NB Nos.
25 X 15 NB Nos.
25 X 20 NB Nos.
32 x 15 NB Nos.
32 x 20 NB Nos.
32 x 25 NB Nos.
40 x 15 NB Nos.
40 x 20 NB Nos.
40 x 25 NB Nos.
40 x 32 NB Nos.
50 x 15 NB Nos.
UN-EQUAL TEE 50 X 25 NB Nos.
Unequal tee as per IS 1239 50 X 32 NB Nos.
CPVC .) Part II
50 x 40 NB Nos.
65 x 15 NB Nos.
65 x 20 NB Nos.
65 x 25 NB Nos.
65 x 32 NB Nos.
65 x 40 NB Nos.
65 x 50 NB Nos.
80 x 15 NB Nos.
80 x 25 NB Nos.
80 x 40 NB Nos.
80 x 50 NB Nos.
100 X 80 NB Nos.
25 x 15 NB Nos.
25 x 20 NB Nos.
40 X 25 NB Nos.
40 x 32 NB Nos.
50 x 15 NB Nos.
ECCENTRIC REDUCER 50 x 40 NB Nos.
GI- Ecentric reducer as per IS
1239 (CPVC .) Part II 80 x 40 NB Nos.
80 x 50 NB Nos.
80 x 65 NB Nos.
100 x 50 NB Nos.
100 x 65 NB Nos.
100 x 80 NB Nos.
25 x 15 NB Nos.
40 X 25 NB Nos.
40 x 15 NB Nos.
CONCENTRIC REDUCER
GI- Concentric reduceer as per IS
1239 (GALV.) Part II
50 x 15 NB Nos.
CONCENTRIC REDUCER 50 x 40 NB Nos.
GI- Concentric reduceer as per IS 80 x 40 NB Nos.
1239 (GALV.) Part II
80 x 50 NB Nos.
80 x 65 NB Nos.
100 x 50 NB Nos.
100 x 65 NB Nos.
100 x 80 NB Nos.
15 NB Nos.
NIPPLE 20 NB Nos.
GI- Nipple as per IS 1239 (GALV.)
Part II 25 NB Nos.
15 NB Nos.
HALF COUPLING 20 NB Nos.
GI- Half Coupling as per IS 1239
(GALV.) Part II 25 NB Nos.
15 NB Nos.
FULL COUPLING 20 NB Nos.
GI- Full Coupling as per IS 1239
(GALV.) Part II 25 NB Nos.
15 NB Nos.
20 NB Nos.
UNION (THREADED)
25 NB Nos.
50 NB Nos.
15 NB Nos.
15 NB (Blind) Nos.
20 NB Nos.
20 NB (Blind) Nos.
25 NB Nos.
25 NB (Blind) Nos.
32 NB Nos.
32 NB (Blind) Nos.
40 NB Nos.
GI FLANGES : SORF ASA 150 #
40 NB (Blind) Nos.
50 NB Nos.
50 NB (Blind) Nos.
65 NB Nos.
65 NB (Blind) Nos.
80 NB Nos.
80 NB (Blind) Nos.
100 NB Nos.
100 NB (Blind) Nos.
15 NB Nos.
20 NB Nos.
25 NB Nos.
32 NB Nos.
GASKET (STYLE -11)
40 NB Nos.
50 NB Nos.
65 NB Nos.
80 NB Nos.
M12X60 24 Nos.
M12X65 Nos.
M12X75 Nos.
Bolt Nuts (GI) Hexagonal WITH M14X85 Nos.
WASHER M14X90 48 Nos.
M16x105 Nos.
M16x115 Nos.
M20X125 Nos.
Miscellenous
15 NB 4 Nos.
20 NB Nos.
GI cap 25 NB Nos.
32 NB Nos.
50 NB Nos.
15 NB 4 Nos.
20 NB Nos.
25 NB 8 Nos.
32 NB 8 Nos.
U' Clamp 40 NB Nos.
50 NB 20 Nos.
65 NB Nos.
80 NB 4 Nos.
U' Clamp
100 NB Nos.
0
Total Amount
Value (Rs.)
Installation
0
BILL OF QUANTITY OF MS-CS PIPING
: M/s SARVOTHAM CARE PVT LTD.,
NUETRACUETICAL R&D FACILITY
LOCATION: JEEDIPALLY, NEAR HYDERABAD :12.10.2021
PROJECT NO: 2103 :CM1-M.Q-03-01
Chilled Water- Chilled Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Hot Water Total Unit QTY R
PROCESS Water- HVAC Rate Amount Rate Amount
5 Equal Tee Equal Tee, material as per A 105/ASTM A 105, SW end, 3000# 15 0.5 0 - 0.00
Nos.
Dimention as per ANSI 16.11/ B-16.11 / IS1239(II) 20 0.75 0 Nos. - 0.00
25 1 22 22 Nos. - 0.00
32 1.25 0 Nos. - 0.00
Equal Tee, material as per ASTM A 234 Gr. WPB 40 1.5 0 Nos. - 0.00
Dimention as per ANSI 16.11 50 2 0 Nos. - 0.00
65 2.5 0 Nos. - 0.00
80 3 0 Nos. - 0.00
100 4 0 Nos. - 0.00
125 5 0 Nos. - 0.00
150 6 1 1 Nos. - 0.00
200 8 0 Nos. - 0.00
250 10 0 Nos. - 0.00
300 12 0 Nos. - 0.00
TOTAL
0
6 Unequal Tee Unequal Tee, material as per A 105, SW end, 3000# 50x25 23 23 Nos. - 0.00
Dimention as per ANSI 16.11 80x25 10 10 Nos. - 0.00
Unequal Tee, material as per ASTM A 234 Gr. WPB 100X80 2 2 Nos. - 0.00
Dimention as per ANSI 16.11 0 Nos. - 0.00
0 Nos. - 0.00
TOTAL
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 12 14 13 39 - 0.00
Nos.
suitable for class ASA 150#, RF flange Dimensions suitable 20 0.75 0 - 0.00
Nos.
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 150 C To 0 C)
0 0
25 1 99 160 83 342 Nos. - 0.00
32 1.25 0 0 Nos. - 0.00
40 1.5 2 126 128 Nos. - 0.00
50 2 96 10 60 166 Nos. - 0.00
65 2.5 36 36 Nos. - 0.00
80 3 31 56 87 Nos. - 0.00
100 4 78 0 78 Nos. - 0.00
125 5 0 Nos. - 0.00
150 6 36 36 Nos. - 0.00
200 8 14 14 Nos. - 0.00
250 10 6 6 Nos. - 0.00
300 12 0 Nos. - 0.00
TOTAL
With matching pair of flanges, nuts and bolts,washer and
40 1.5
gaskets
12 Expansion Bellow MOC: MS 50 2 0 - 0.00
Nos.
Flange end - ASA 150, 65 2.5 0 Nos. - 0.00
PN-10 Rating 80 3 0 Nos. - 0.00
Temp.- (-)10 Dg C to 70 Dg C 100 4 0 Nos. - 0.00
Spool Piece length of minimum 300 mm 125 5 0 Nos. - 0.00
Capable of absorbing combinations of axial, lateral and angular
movement type of expansion joint (Universal Expansion Joint 150 6 0 - 0.00
to take care of the seismic variations). Nos.
TOTAL
Grand Total - -
0
4 Elbows 90º Elbows to IS 1239 Part 2 Pipe Fittings up to 1/2" to 6" 15 0.5 63 63 72.45 Nos. 36.23 Inch Dia - 36.23
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) CA Total QTY R Unit QTY R Unit QTY R
Rate Amount Rate Amount
Long radius Dimension Suitability to ASME B16.9 20 0.75 0 0 Nos. 0.00 Inch Dia - 0.00
(R-1.5D) Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D 25 1 16 16 18.4 Nos. 18.40 Inch Dia - 18.40
IS 1239 Material Size up to 1/2" to 6" 32 1.25 0 0 Nos. 0.00 Inch Dia - 0.00
GI 90º Elbows, material per ASME B16.9, B16.28 40 1.5 1 1 1.15 Nos. 1.73 Inch Dia - 1.73
50 2 5 5 5.75 Nos. 11.50 Inch Dia - 11.50
65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
80 3 12 12 13.8 Nos. 41.40 Inch Dia - 41.40
100 4 0 0 Nos. 0.00 Inch Dia - 0.00
125 5 0 0 Nos. 0.00 Inch Dia - 0.00
150 6 0 0 Nos. 0.00 Inch Dia - 0.00
200 8 0 0 Nos. 0.00 Inch Dia - 0.00
250 10 0 0 Nos. 0.00 Inch Dia - 0.00
300 12 0 0 0.00
TOTAL
7 Concentric Reducer, material as per A 105/ASTM A 105/, SW end. 20X15 0 0 Nos. - Nos. - -
Reducer Dimensional Suitability to ASME B16.9 25X15 0 0 Nos. - Nos. - -
25X20 0 0 Nos. - Nos. - -
40X15 0 0 Nos. - Nos. - -
40X20 0 0 Nos. - Nos. - -
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) CA Total QTY R Unit QTY R Unit QTY R
Rate Amount Rate Amount
40X25 0 0 Nos. - Nos. - -
40X32 0 0 Nos. - Nos. - -
50x15 0 0 Nos. - Nos. - -
50x20 0 0 Nos. - Nos. - -
50x25 0 0 Nos. - Nos. - -
50x40 1 1 1 Nos. 1.00 Nos. - 1.00
65X40 1 1 1 Nos. 1.00 Nos. - 1.00
65 x 50 1 1 1 Nos. 1.00 Nos. - 1.00
80x25 0 0 Nos. - Nos. - -
80x32 0 0 Nos. - Nos. - -
80x50 0 0 Nos. - Nos. - -
100X50 0 0 Nos. - Nos. - -
150X50 0 0 Nos. - Nos. - -
150X80 0 0 Nos. - Nos. - -
200X80 0 0 Nos. - Nos. - -
200X150 0 0 Nos. - Nos. - -
300X200 0 0 Nos. - Nos. - -
TOTAL
0 0
8 Eccentric Reducer, material as per A 105/ASTM A 105/, SW end. 20X15 0 0 Nos. - Nos. - -
Reducer Dimensional Suitability to ASME B16.9 25X15 0 0 Nos. - Nos. - -
25X20 0 0 Nos. - Nos. - -
40X15 0 0 Nos. - Nos. - -
40X20 0 0 Nos. - Nos. - -
40X25 0 0 Nos. - Nos. - -
50x15 0 0 Nos. - Nos. - -
50x20 0 0 Nos. - Nos. - -
50x25 0 0 Nos. - Nos. - -
50x40 0 0 Nos. - Nos. - -
65X40 0 0 Nos. - Nos. - -
65 x 50 0 0 Nos. - Nos. - -
80x25 0 0 Nos. - Nos. - -
80x32 0 0 Nos. - Nos. - -
80x50 0 0 Nos. - Nos. - -
100X50 0 0 Nos. - Nos. - -
150X50 0 0 Nos. - Nos. - -
150X80 0 0 Nos. - Nos. -
150X200 0 0 Nos. - Nos. - -
200X80 0 0 Nos. - Nos. - -
300X200 0 0 Nos. - Nos. - -
0 0 Nos. - Nos. - -
TOTAL
9 Nipple, Two End GI material to ASTM A106 Grade B Seamless Pipe 15 0.5 9 9 9 Nos. 4.50 Inch Dia - 4.50
Size 75-100 mm, 2-5 Inch Long, with both side screwed end to
Threaded 20 0.75 1 1 1 0.75 Inch Dia - 0.75
BSPT(M) Nos.
25 1 0 0 Nos. 0.00 Inch Dia - 0.00
40 1.5 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
0 0 Nos. - Nos.
10 Nuts & Bolts GI Nuts & Bolts to IS : 7935/1975 M12X75 0 0 Nos. - Nos. - 0.00
bolts, fully threaded M12X70 0 0 Nos. - Nos. 0.00
Material to IS-1363/Part-I & III/1984. M14X50 528 528 528 Nos. 528.00 Nos. 528.00
M14X65 144 144 144 Nos. 144.00 Nos. 144.00
M16X75 192 192 192 Nos. 192.00 Nos. 192.00
M16X80 0 0 Nos. - Nos. 0.00
M20x90 0 0 Nos. - Nos. 0.00
M16x105 0 0 Nos. - Nos. 0.00
M16x115 0 0 Nos. - Nos. 0.00
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) CA Total QTY R Unit QTY R Unit QTY R
Rate Amount Rate Amount
M20 X 90 0 0 Nos. - Nos. 0.00
M24X 100 0 0 Nos. - Nos. - 0.00
0 0 Nos. - Nos. - 0.00
TOTAL
11 Gaskets Pre cut Ring Gasket, Non-Asbestos 15 0.5 131 131 131 Nos. 131.00 Nos. - 65.50
Dimensions suitable to ASME / ANSI B 16.5 & BS 1560 20 0.75 1 1 1 Nos. 1.00 Nos. - 0.75
25 1 34 34 34 Nos. 34.00 Nos. - 34.00
32 1.25 0 0 Nos. - Nos. - -
40 1.5 2 2 2 Nos. 2.00 Nos. - 3.00
50 2 9 9 9 Nos. 9.00 Nos. - 18.00
65 2.5 3 3 3 Nos. 3.00 Nos. - 7.50
80 3 36 36 36 Nos. 36.00 Nos. - 108.00
100 4 0 0 Nos. - Nos. - -
125 5 0 0 Nos. - Nos. - -
150 6 0 0 Nos. - Nos. - -
200 8 0 0 Nos. - Nos. - -
250 10 0 0 Nos. - Nos. - -
300 12 0 0 Nos. - Nos. - -
TOTAL
With matching pair of flanges, nuts and bolts,washer and
40 1.5
gaskets
12 Expansion Bellow MOC: GI 50 2 0 0 0.00 Inch Dia - 0.00
Nos.
Flange end - ASTM A105 65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
Spool Piece length of minimum 300 mm 80 3 0 0 Nos. 0.00 Inch Dia - 0.00
Capable of absorbing combinations of axial, lateral and angular
movement type of expansion joint (Universal Expansion Joint 100 4 0 0 0.00 Inch Dia - 0.00
to take care of the seismic variations). Nos.
125 5 0 0 Nos. 0.00 Inch Dia - 0.00
150 6 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
Grand Total - -
0 0
Note: ALL PIPING & & ACCESSORIES QTY. 10 TO 15 % ±
BILL OF QUANTITY OF CPVC PIPING
CLIENT : M/s SARVOTHAM CARE PVT LTD.,
NUETRACUETICAL R&D FACILITY
LOCATION: JEEDIPALLY, NEAR HYDERABAD DATE :12.10.2021
PROJECT NO: 2103 DOCUMENT NO :CM1-M.Q-05-01
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) POW Total QTY R Unit QTY R Unit QTY R
Rate Amount Rate Amount
1 Pipes (in Mtrs) CPVC pipe to IS:15778:2007 up 2″ (50 mm) 15 0.5 74 74 74 Meter 37.00 Inch Meter - 37.00
Dimension Std: ASTM 2846 20 0.75 30 30 30 Meter 22.50 Inch Meter - 22.50
CPVC pipe to ASTMF 441 Above 2″ (50 mm) 25 1 118 118 118 Meter 118.00 Inch Meter - 118.00
Dimension Std:ASTMF 438 & 439 32 1.25 0 0 Meter 0.00 Inch Meter - 0.00
40 1.5 116 116 116 Meter 174.00 Inch Meter - 174.00
50 2 120 120 120 Meter 240.00 Inch Meter - 240.00
65 2.5 0 0 Meter 0.00 Inch Meter - 0.00
80 3 142 142 142 Meter 426.00 Inch Meter - 426.00
100 4 12 12 12 Meter 48.00 Inch Meter - 48.00
125 5 0 0 Meter 0.00 Inch Meter - 0.00
TOTAL
-
CPVC CLASS 150 slip-on flange to ASTM F 439, complete
2 Flanges 15 0.5 37 37 37 18.50 - 18.50
with Nuts, Bolts &clamps. Nos. Inch Dia
Blind Type,Closed ring design for capping off a mating flange, 20 0.75 8 8 8 6.00 - 6.00
Nos. Inch Dia
Dimensional Suitability to ANSI B16.5 25 1 40 40 40 Nos. 40.00 Inch Dia - 40.00
32 1.25 0 0 Nos. 0.00 Inch Dia - 0.00
40 1.5 22 22 22 Nos. 33.00 Inch Dia - 33.00
50 2 24 24 24 Nos. 48.00 Inch Dia - 48.00
65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
80 3 14 14 14 Nos. 42.00 Inch Dia - 42.00
100 4 8 8 8 Nos. 32.00 Inch Dia - 32.00
125 5 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
-
CPVC CLASS 150 slip-on flange to ASTM F 439, complete
3 Flanges blind 15 0.5 0 0 0.00 Inch Dia - 0.00
with Nuts, Bolts &clamps. Nos.
Blind Type,Closed ring design for capping off a mating flange, 20 0.75 1 1 1 0.75 Inch Dia - 0.75
Nos.
Dimensional Suitability to ANSI B16.5 25 1 2 2 2 Nos. 2.00 Inch Dia - 2.00
32 1.25 0 0 Nos. 0.00 Inch Dia - 0.00
40 1.5 0 0 Nos. 0.00 Inch Dia - 0.00
50 2 1 1 1 Nos. 2.00 Inch Dia - 2.00
65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
80 3 0 0 Nos. 0.00 Inch Dia - 0.00
100 4 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
4 Elbows 90º Elbows to IS:15778:2007 Pipe Fittings up to 1/2" to 1" 15 0.5 0 0 Nos. 0.00 Inch Dia - 0.00
Long radius Dimension Suitability to ANSI B16.5 20 0.75 5 5 5 Nos. 3.75 Inch Dia - 3.75
(R-1.5D) Bending Radius R=1D, 2D, 3D, 25 1 8 8 8 Nos. 8.00 Inch Dia - 8.00
IS 1239 Material Size up to 1/2" to 1" 32 1.25 0 0 Nos. 0.00 Inch Dia - 0.00
CPVC 90º Elbows, material per ASME B16.9 40 1.5 5 5 5 Nos. 7.50 Inch Dia - 7.50
50 2 6 6 6 Nos. 12.00 Inch Dia - 12.00
65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
80 3 9 9 9 Nos. 27.00 Inch Dia - 27.00
100 4 3 3 3 Nos. 12.00 Inch Dia - 12.00
125 5 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
5 Equal Tee Equal Tee, material as per ASTM F437, SW end, 3000# 15 0.5 0 0 Nos. 0.00 Inch Dia - 0.00
Dimensional Suitability to ANSI B16.5 20 0.75 0 0 Nos. 0.00 Inch Dia - 0.00
25 1 0 0 Nos. 0.00 Inch Dia - 0.00
32 1.25 0 0 Nos. 0.00 Inch Dia - 0.00
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) POW Total QTY R Unit QTY R Unit QTY R
Rate Amount Rate Amount
40 1.5 0 0 Nos. 0.00 Inch Dia - 0.00
50 2 0 0 Nos. 0.00 Inch Dia - 0.00
65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
80 3 0 0 Nos. 0.00 Inch Dia - 0.00
100 4 1 1 1 Nos. 4.00 Inch Dia - 4.00
125 5 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
0 0
6 Unequal Tee Unequal Tee, material as per ASTM F437, SW end, 3000# 20x15 2 2 2 Nos. 2.00 Nos. - 2.00
Dimensional Suitability to ANSI B16.5 25x15 8 8 8 Nos. 8.00 Nos. - 8.00
40x15 9 9 9 Nos. 9.00 Nos. - 9.00
40x25 1 1 1 Nos. 1.00 Nos. - 1.00
50x15 12 12 12 Nos. 12.00 Nos. - 12.00
80X15 4 4 4 Nos. 4.00 Nos. - 4.00
80X20 1 1 1 Nos. 1.00 Nos. - 1.00
80x25 1 1 1 Nos. 1.00 Nos. - 1.00
80x50 1 1 1 Nos. 1.00 Nos. - 1.00
100X20 1 1 1 Nos. 1.00 Nos. - 1.00
100X40 1 1 1 Nos. 1.00 Nos. - 1.00
TOTAL
7 Concentric Reducer material as per ASTM F437, SW end, 3000# 20X15 1 1 1 Nos. 1.00 Nos. - 1.00
Reducer Dimensional Suitability to ANSI B16.5 40X25 2 2 2 Nos. 2.00 Nos. - 2.00
80x40 1 1 1 Nos. 1.00 Nos. - 1.00
100X80 1 1 1 Nos. 1.00 Nos. - 1.00
TOTAL
0 0
8 Eccentric Reducer material as per ASTM F437, SW end, 3000# 20X15 0 0 Nos. - Nos. - -
Reducer Dimensional Suitability to ANSI B16.5 25X15 0 0 Nos. - Nos. - -
25X20 0 0 Nos. - Nos. - -
40X15 0 0 Nos. - Nos. - -
40X20 0 0 Nos. - Nos. - -
0 0 Nos. - Nos. - -
TOTAL
9 Nipple, Two End CPVC material to ASTM D 178 15 0.5 0 0 Nos. 0.00 Inch Dia - 0.00
Size 75-100 mm, 2-5 Inch Long, with both side screwed end to
Threaded 20 0.75 0 0 0.00 Inch Dia - 0.00
ANSI B16.5; ASTM D 4024 Nos.
25 1 0 0 Nos. 0.00 Inch Dia - 0.00
40 1.5 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
0 0 Nos. - Nos.
10 Nuts & Bolts CPVC Nuts & Bolts to ANSI B16.5; ASTM D 4024 M12X75 0 0 Nos. - Nos. - 0.00
bolts, fully threaded M12X70 0 0 Nos. - Nos. 0.00
Material to ASTM D 1784 CPVC Cell Classification 23447-B. M14X50 #REF! #REF! #REF! #REF!
Nos. #REF! Nos.
M14X65 124 124 124 Nos. 124.00 Nos. 124.00
M16X70 0 0 Nos. - Nos. 0.00
M16X75 116 116 116 Nos. 116.00 Nos. 116.00
M20x90 0 0 Nos. - Nos. 0.00
M16x105 0 0 Nos. - Nos. 0.00
M16x115 0 0 Nos. - Nos. 0.00
M20 X 90 0 0 Nos. - Nos. 0.00
M24X 100 0 0 Nos. - Nos. - 0.00
0 0 Nos. - Nos. - 0.00
TOTAL
11 Gaskets Gasket made up of black rubber EPDM material 25 1 20 #REF! #REF! Nos. #REF! Nos. #REF! #REF!
Dimensions suitable to ANSI B16.5 32 1.25 #REF! #REF! Nos. #REF! Nos. #REF! #REF!
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) POW Total QTY R Unit QTY R Unit QTY R
Rate Amount Rate Amount
40 1.5 11 20 20 Nos. 20.00 Nos. - 20.00
50 2 14 0 0 Nos. - Nos. - -
65 2.5 11 11 Nos. 11.00 Nos. - 16.50
80 3 6 14 14 Nos. 14.00 Nos. - 28.00
100 4 3 0 0 Nos. - Nos. - -
TOTAL
With matching pair of flanges, nuts and bolts,washer and
40 1.5
gaskets
12 Expansion Bellow MOC: CPVC 50 2 0 0 0.00 Inch Dia - 0.00
Nos.
Flange end - ANSI B16.5 65 2.5 0 0 Nos. 0.00 Inch Dia - 0.00
Plastic Threaded End 80 3 0 0 Nos. 0.00 Inch Dia - 0.00
Capable of absorbing combinations of axial, lateral and angular
movement type of expansion joint (Universal Expansion Joint 100 4 0 0 0.00 Inch Dia - 0.00
to take care of the seismic variations). Nos.
125 5 0 0 Nos. 0.00 Inch Dia - 0.00
150 6 0 0 Nos. 0.00 Inch Dia - 0.00
TOTAL
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 83.522 Meter 62.64 Inch Meter - -
25 1 16.872 Meter 16.87 Inch Meter - -
32 1.25 71.872 Meter 89.84 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 150 40 1.5 103.55 Meter 155.33 Inch Meter - -
Heavy bevelled end 50 2 168.15 Meter 336.30 Inch Meter - -
65 2.5 99.732 Meter 249.33 Inch Meter - -
80 3 246.83 Meter 740.49 Inch Meter - -
100 4 93.08 Meter 372.32 Inch Meter - -
125 5 164.77 Meter 823.85 Inch Meter - -
150 6 90.764 Meter 544.58 Inch Meter - -
200 8 18.04 Meter 144.32 Inch Meter - -
250 10 76.662 Meter 766.62 Inch Meter - -
TOTAL 4302.49 Inch Meter - -
2 Flanges Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Slip On Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 0 Nos. 0 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
32 1.25 3 - -
SORF, SF Nos. 3.75 Inch Dia
40 1.5 5 Nos. 7.5 Inch Dia - -
50 2 11 Nos. 22 Inch Dia - -
65 2.5 5 Nos. 12.5 Inch Dia - -
80 3 7 Nos. 21 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 32 Nos. 192 Inch Dia - -
200 8 2 Nos. 16 Inch Dia - -
250 10 16 Nos. 160 Inch Dia - -
TOTAL 434.75 - -
3 Flanges blind Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Blind Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 0 Nos. 0 Inch Dia - -
32 1.25 3 Nos. 3.75 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
40 1.5 5 7.5 Inch Dia - -
SORF, SF Nos.
50 2 11 Nos. 22 Inch Dia - -
65 2.5 5 Nos. 12.5 Inch Dia - -
80 3 7 Nos. 21 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 1 Nos. 6 Inch Dia - -
200 8 2 Nos. 16 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 88.75 Inch Dia - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000# 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 104 78 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Long radius Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239 Part
25 1 52 52 Inch Dia - -
(R-1.5D) 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 56 Nos. 70 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 52 Nos. 78 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 31 Nos. 62 Inch Dia - -
Seamless, Sch. 40. 65 2.5 40 Nos. 100 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 28 Nos. 84 Inch Dia - -
100 4 4 Nos. 16 Inch Dia - -
125 5 8 Nos. 40 Inch Dia - -
150 6 6 Nos. 0 Inch Dia - -
200 8 2 Nos. 16 Inch Dia - -
250 10 32 Nos. 320 Inch Dia - -
TOTAL 916.00 Inch Dia - -
5 Equal Tee Equal Tee, material as per A 105/ASTM A 105, SW end, 30 15 0.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11/ B-16.11 / IS1239(II) 20 0.75 0 Nos. - Inch Dia - -
25 1 0 Nos. - Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
Equal Tee, material as per ASTM A 234 Gr. WPB 40 1.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11 50 2 0 Nos. - Inch Dia - -
65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Unequal Tee, material as per A 105, SW end, 3000# 20x15 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 25x15 0 Nos. - Nos. - -
Unequal Tee, material as per ASTM A 234 Gr. WPB 25x20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 32x15 0 Nos. - Nos. - -
40x15 0 Nos. - Nos. - -
40x20 0 Nos. - Nos. - -
40x25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
7 Concentric Reducer, material as per A 105/ASTM A 105/, B 16.11, SW 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 2 Nos. 2.00 Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 1 Nos. 1.00 Nos. - -
125 x 50 1 Nos. 1.00 Nos. - -
125 x 80 2 Nos. 2.00 Nos. - -
125 x 100 3 Nos. 3.00 Nos. - -
150 x 100 1 Nos. 1.00 Nos. - -
TOTAL 10.00 Nos. - -
8 Eccentric Reducer, material as per A 105/ASTM A 105/, B 16.11, SW 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded M14X65 0 Nos. - Nos. - -
IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitable 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem. Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 0 Nos. 0 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 3 Nos. 3 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 0 Nos. 0 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 0 Inch Dia - -
insulation pipe shall be provided with extended stem. Nos.
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 3.00 Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 3 Nos. 18 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 3 Nos. 30 Inch Dia - -
TOTAL 48.00 Inch Dia - -
22 Check valve same as non return valve specification 25 1 6 Nos. 6.00 Inch Dia 1 6.00 -
TOTAL 6.00 Inch Dia 6.00 -
26
Safety Valve(Pilot Piston type)
Material outlet body WCB, CF8M, CF8 15 0.5 0 Nos. - Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange
25 1 0 - -
rating inlet PN 10 - PN 250/ 400 Nos. - Inch Dia
Spring loaded, Screwed lifting lever cap, Set Pressure 0.49 32 1.25 0 - -
- 250 bar Nos. - Inch Dia
TOTAL - Inch Dia - -
27 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(Screw End) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Connection type: screwed end BSPT 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
28 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(FlangeEnd) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Flange type: ANSI 150 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
Body & Cover :ASTM A216 GR WCB,
Valve seat, Ball Float & Lever Assly , SLR Valve seat :
15 0.5 - -
29 Steam Trap AISI304 Nos. - Inch Dia
Strainer screen : AISI 304 , 40 Mesh 20 0.75 0 Nos. - Inch Dia - -
Steel Ball : SS 420C, 25 1 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 40 1.5 0 Nos. - Inch Dia - -
(Make:Spirax, Uni Klinger), Flange end to #150 50 2 0 Nos. - Inch Dia - -
- Inch Dia - -
PRS station having moisture seperator, drain valve and trap
30 PRS pressure gauge,isolation valve,safety relief valve 50 2 0 Nos. - Inch Dia - -
End Connections:flange / Body Materials:Carbon steel 125 5 0 Nos. - Inch Dia - -
Control Pressure Range: (0 to 40bar) , Maximum Body
Design Rating:PN40 and ANSI 300 (10.54 Kg/Cm2g to 3.5 150 6 0 - -
Kg/Cm2) Nos. - Inch Dia
TOTAL - Inch Dia - -
Flow trap having isolation valve,strainer, disc check valve
31 Flow Trap AssemblyBody & Cover :ASTM A216 GR WCB, 20 0.75 0 Nos. - Inch Dia - -
Valve seat, Ball Float & Lever Assly , SLR Valve seat :
25 1 0 - -
AISI304 Nos. - Inch Dia
Strainer screen : AISI 304 , 40 Mesh 40 1.5 0 Nos. - Inch Dia - -
Steel Ball : SS 420C, 50 2 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 65 2.5 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
32 Drain Trap Rating: 600# (BSPT (M) Thread),Body & Disc: AISI 420 15 0.5 0 Nos. - Inch Dia - -
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 157.61 Meter 118.21 Inch Meter - -
25 1 77.353 Meter 77.35 Inch Meter - -
32 1.25 161.58 Meter 201.98 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 15 40 1.5 8.7 Meter 13.05 Inch Meter - -
Heavy bevelled end 50 2 70.4 Meter 140.80 Inch Meter - -
65 2.5 63.263 Meter 158.16 Inch Meter - -
80 3 76.042 Meter 228.13 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 937.67 Inch Meter - -
2 Flanges Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Slip On Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 8 Nos. 8 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
32 1.25 6 - -
SORF, SF Nos. 7.5 Inch Dia
40 1.5 0 Nos. 0 Inch Dia - -
50 2 3 Nos. 6 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 24 Nos. 72 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 93.50 - -
3 Flanges blind Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Blind Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 8 Nos. 8 Inch Dia - -
32 1.25 6 Nos. 7.5 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
40 1.5 0 0 Inch Dia - -
SORF, SF Nos.
50 2 3 Nos. 6 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 21.50 Inch Dia - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 128 96 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Long radius Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 14 14 Inch Dia - -
(R-1.5D) Part 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 8 Nos. 10 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 4 Nos. 6 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 2 Nos. 4 Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. 0 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 8 Nos. 24 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 154.00 Inch Dia - -
5 Equal Tee Equal Tee, material as per A 105/ASTM A 105, SW end, 3 15 0.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11/ B-16.11 / IS1239(II) 20 0.75 0 Nos. - Inch Dia - -
25 1 0 Nos. - Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
Equal Tee, material as per ASTM A 234 Gr. WPB 40 1.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11 50 2 0 Nos. - Inch Dia - -
65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
7 Concentric Reducer, material as per A 105/ASTM A 105/, B 16.11, S 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
8 Eccentric Reducer, material as per A 105/ASTM A 105/, B 16.11, S 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded M14X65 0 Nos. - Nos. - -
IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitabl 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 3 Nos. 1.5 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 2 Nos. 3 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 2 Nos. 8 Inch Dia - -
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 8.00 Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 1 Nos. 2 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 2 Nos. 8 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 10.00 Inch Dia - -
18 Air vent Assembly With ASTM A 105 body, 15 0.5 2 Nos. 1 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 2 Nos. 3 Inch Dia - -
TOTAL 4 1.00 Inch Dia 0 0
4.00
Pressure gauge Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with 15 0.5 4 4 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 4 4.00 - -
22 Check valve same as non return valve specification 25 1 0 Nos. - Inch Dia 1 - -
TOTAL - Inch Dia - -
26 Safety Valve(Pilot Piston type) Material outlet body WCB, CF8M, CF8 15 0.5 0 Nos. - Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange
25 1 2 - -
rating inlet PN 10 - PN 250/ 400 Nos. 2.00 Inch Dia
Spring loaded, Screwed lifting lever cap, Set Pressure 32 1.25 0 - -
0.49 - 250 bar Nos. - Inch Dia
TOTAL 2.00 Inch Dia - -
27 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(Screw End) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Connection type: screwed end BSPT 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
28 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(FlangeEnd) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 2 Nos. 4.00 Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Flange type: ANSI 150 100 4 0 Nos. - Inch Dia - -
32 Drain Trap Rating: 600# (BSPT (M) Thread),Body & Disc: AISI 420 15 0.5 0 Nos. - Inch Dia - -
Main Bore Cap: AISI 420,ISO tube :SS 20 0.75 0 Nos. - Inch Dia - -
Filter: AISI 304, Perforated sheet,Filter cap: AISI 420 25 1 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 40 1.5 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
Grand Total - -
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 35.928 Meter 26.95 Inch Meter - -
25 1 0 Meter 0.00 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 15 40 1.5 65.917 Meter 98.88 Inch Meter - -
Heavy bevelled end 50 2 125 Meter 250.00 Inch Meter - -
65 2.5 20.009 Meter 50.02 Inch Meter - -
80 3 98.004 Meter 294.01 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 719.86 Inch Meter - -
2 Flanges Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Slip On Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 0 Nos. 0 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
32 1.25 0 - -
SORF, SF Nos. 0 Inch Dia
40 1.5 1 Nos. 1.5 Inch Dia - -
50 2 0 Nos. 0 Inch Dia - -
65 2.5 1 Nos. 2.5 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 4.00 - -
3 Flanges blind Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Blind Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 0 Nos. 0 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
40 1.5 1 1.5 Inch Dia - -
SORF, SF Nos.
50 2 0 Nos. 0 Inch Dia - -
65 2.5 1 Nos. 2.5 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 4.00 Inch Dia - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 14 10.5 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Long radius Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 0 Inch Dia - -
(R-1.5D) Part 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. 0 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 11 Nos. 16.5 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 4 Nos. 8 Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. 0 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 4 Nos. 12 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 47.00 Inch Dia - -
5 Equal Tee Equal Tee, material as per A 105/ASTM A 105, SW end, 3 15 0.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11/ B-16.11 / IS1239(II) 20 0.75 0 Nos. - Inch Dia - -
25 1 0 Nos. - Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
Equal Tee, material as per ASTM A 234 Gr. WPB 40 1.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11 50 2 0 Nos. - Inch Dia - -
65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Unequal Tee, material as per A 105, SW end, 3000# 20x15 0 Nos. - Nos. - -
Page 34 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
Dimention as per ANSI 16.11 25x15 0 Nos. - Nos. - -
Unequal Tee, material as per ASTM A 234 Gr. WPB 25x20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 32x15 0 Nos. - Nos. - -
40x15 0 Nos. - Nos. - -
40x20 0 Nos. - Nos. - -
40x25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 0 - - -
7 Concentric Reducer, material as per A 105/ASTM A 105/, B 16.11, S 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
Page 35 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
8 Eccentric Reducer, material as per A 105/ASTM A 105/, B 16.11, S 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded M14X65 0 Nos. - Nos. - -
IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitabl 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 0 Nos. 0 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 0 Nos. 0 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos.
125 5 0 Nos. 0 Inch Dia - -
Page 36 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
Page 37 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
18 Air vent Assembly With ASTM A 105 body, 15 0.5 10 Nos. 5 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 10 5.00 Inch Dia 0 0
5.00
Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with
Pressure gauge 15 0.5 6 6 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 6 6.00 - -
SUITABLE WITH CONNECTING IN RS485(MODBUS)
TEMP:at 0 to 100 deg centi, Electrical conductivity: >300 0 - -
20 Flow meter μS/cm, FLOW CAPACITY: 600 M3/HR 40 1.5 Nos. - Nos.
Application range: Continuous measurement of
instantaneous and totalized flow, velocity, mass flow (at 1 - -
constant density) 80 3 Nos. 1.00 Nos.
Large back lit liquid crystal display, Supply voltage: 110 / 0 - -
220 VAC (4 wire) 150 6 Nos. - Nos.
Page 38 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
Push buttons / Hall Effect sensors for programming, 0 - -
Flange end connection 250 10 Nos. - Nos.
TOTAL 1.00 - -
22 Check valve same as non return valve specification 25 1 0 Nos. - Inch Dia 1 - -
TOTAL - Inch Dia - -
Page 39 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
26 Safety Valve(Pilot Piston type) Material outlet body WCB, CF8M, CF8 15 0.5 0 Nos. - Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange
25 1 2 - -
rating inlet PN 10 - PN 250/ 400 Nos. 2.00 Inch Dia
Spring loaded, Screwed lifting lever cap, Set Pressure 32 1.25 0 - -
0.49 - 250 bar Nos. - Inch Dia
TOTAL 2.00 Inch Dia - -
27 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(Screw End) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Connection type: screwed end BSPT 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
28 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(FlangeEnd) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 34 Nos. 25.50 Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 1 Nos. 1.00 Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 4 Nos. 6.00 Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 5 Nos. 10.00 Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 3 Nos. 9.00 Inch Dia - -
Flange type: ANSI 150 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL 51.50 Inch Dia - -
Body & Cover :ASTM A216 GR WCB,
Valve seat, Ball Float & Lever Assly , SLR Valve seat :
15 0.5 0 - -
29 Steam Trap AISI304 Nos. - Inch Dia
Strainer screen : AISI 304 , 40 Mesh 20 0.75 0 Nos. - Inch Dia - -
Steel Ball : SS 420C, 25 1 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 40 1.5 2 Nos. 3.00 Inch Dia - -
(Make:Spirax, Uni Klinger), Flange end to #150 50 2 0 Nos. - Inch Dia - -
3.00 Inch Dia - -
PRS station having moisture seperator, drain valve and trap
30 PRS pressure gauge,isolation valve,safety relief valve 50 2 0 Nos. - Inch Dia - -
End Connections:flange / Body Materials:Carbon steel 125 5 0 Nos. - Inch Dia - -
Page 40 STEAM
Bill Of Quantity Of STEAM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
Strainer screen : AISI 304 , 40 Mesh 40 1.5 4 Nos. 6.00 Inch Dia - -
Steel Ball : SS 420C, 50 2 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 65 2.5 0 Nos. - Inch Dia - -
TOTAL 24.50 Inch Dia - -
32 Drain Trap Rating: 600# (BSPT (M) Thread),Body & Disc: AISI 420 15 0.5 6 Nos. 3.00 Inch Dia - -
Main Bore Cap: AISI 420,ISO tube :SS 20 0.75 0 Nos. - Inch Dia - -
Filter: AISI 304, Perforated sheet,Filter cap: AISI 420 25 1 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 40 1.5 0 Nos. - Inch Dia - -
TOTAL 3.00 Inch Dia - -
Grand Total - -
Page 41 STEAM
Bill Of Quantity Of CONDENSATE Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 35.951 Meter 26.96 Inch Meter - -
25 1 66.126 Meter 66.13 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 15 40 1.5 0 Meter 0.00 Inch Meter - -
Heavy bevelled end 50 2 20.009 Meter 40.02 Inch Meter - -
65 2.5 97.503 Meter 243.76 Inch Meter - -
80 3 0 Meter 0.00 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 376.86 Inch Meter - -
2 Flanges Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Slip On Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 1 Nos. 1 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
32 1.25 0 - -
SORF, SF Nos. 0 Inch Dia
40 1.5 0 Nos. 0 Inch Dia - -
50 2 1 Nos. 2 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 3.00 - -
3 Flanges blind Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Blind Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 1 Nos. 1 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
40 1.5 0 0 Inch Dia - -
SORF, SF Nos.
50 2 1 Nos. 2 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 3.00 Inch Dia - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 0 0 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Long radius Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 0 Inch Dia - -
(R-1.5D) Part 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. 0 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 0 Nos. 0 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. 0 Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. 0 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
5 Equal Tee Equal Tee, material as per A 105/ASTM A 105, SW end, 3 15 0.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11/ B-16.11 / IS1239(II) 20 0.75 0 Nos. - Inch Dia - -
25 1 0 Nos. - Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
Equal Tee, material as per ASTM A 234 Gr. WPB 40 1.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11 50 2 0 Nos. - Inch Dia - -
65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Unequal Tee, material as per A 105, SW end, 3000# 20x15 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 25x15 0 Nos. - Nos. - -
Unequal Tee, material as per ASTM A 234 Gr. WPB 25x20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 32x15 0 Nos. - Nos. - -
40x15 0 Nos. - Nos. - -
40x20 0 Nos. - Nos. - -
40x25 0 Nos. - Nos. - -
Page 42 CONDENSATE
Bill Of Quantity Of CONDENSATE Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 0 - - -
7 Concentric Reducer, material as per A 105/ASTM A 105/, B 16.11, SW 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
Page 43 CONDENSATE
Bill Of Quantity Of CONDENSATE Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
8 Eccentric Reducer, material as per A 105/ASTM A 105/, B 16.11, SW 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded M14X65 0 Nos. - Nos. - -
IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitabl 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 0 Nos. 0 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 0 Nos. 0 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Page 44 CONDENSATE
Bill Of Quantity Of CONDENSATE Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
Butterfly Valves Disc : ASTM A351 Gr CF8/CF8M SS Fully polished / A 15 0.5 0 Inch Dia - -
14 216-WCB,API-609, Nos. -
Seat material : White nitrile / EPDM (tasteless), 20 0.75 0 Nos. - Inch Dia - -
Body :CI 25 1 0 Nos. - Inch Dia - -
HANDLE : Lever Operated for size upto 150 mm 32 1.25 0 Nos. - Inch Dia - -
HANDLE : Gear Operated for size 200 mm &above 40 1.5 0 Nos. - Inch Dia - -
End Connection : Wafer Type (Sandwitched type) 50 2 0 Nos. - Inch Dia - -
Rating: 150#, ANSI B16.5, 100% Leak Test 65 2.5 0 Nos. - Inch Dia - -
PN-10 rating 80 3 0 Nos. - Inch Dia - -
Shaft: AISI 410 PTFE coated for permanent dry lubrication 100 4 0 Inch Dia - -
Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
18 Air vent Assembly With ASTM A 105 body, 15 0.5 5 Nos. 2.5 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 5 2.50 Inch Dia 0 0
2.50
Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with
Pressure gauge 15 0.5 0 0 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
SUITABLE WITH CONNECTING IN RS485(MODBUS)
TEMP:at 0 to 100 deg centi, Electrical conductivity: >300 0 - -
20 Flow meter μS/cm, FLOW CAPACITY: 600 M3/HR 40 1.5 Nos. - Nos.
Application range: Continuous measurement of
instantaneous and totalized flow, velocity, mass flow (at 1 - -
constant density) 80 3 Nos. 1.00 Nos.
Large back lit liquid crystal display, Supply voltage: 110 /
0 - -
220 VAC (4 wire) 150 6 Nos. - Nos.
Push buttons / Hall Effect sensors for programming, 0 - -
Flange end connection 250 10 Nos. - Nos.
TOTAL 1.00 - -
Page 45 CONDENSATE
Bill Of Quantity Of CONDENSATE Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
Lower/ Upper Disc - SS-410; Body/Bonnet Gasket-CAF; 200 8 0 - -
Steam/ Seat seal - EPDM Nos. - Inch Dia
Body/Bonnet Bolts - A 307 Gr. B; Gland Packing - 250 10 0 - -
Graphited Asbestos Nos. - Inch Dia
TOTAL 0 - Inch Dia - -
22 Check valve same as non return valve specification 25 1 0 Nos. - Inch Dia 1 - -
TOTAL - Inch Dia - -
26 Safety Valve(Pilot Piston type) Material outlet body WCB, CF8M, CF8 15 0.5 0 Nos. - Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange
25 1 0 - -
rating inlet PN 10 - PN 250/ 400 Nos. - Inch Dia
Spring loaded, Screwed lifting lever cap, Set Pressure 32 1.25 0 - -
0.49 - 250 bar Nos. - Inch Dia
TOTAL - Inch Dia - -
27 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(Screw End) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Connection type: screwed end BSPT 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
28 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(FlangeEnd) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Flange type: ANSI 150 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
Body & Cover :ASTM A216 GR WCB,
Valve seat, Ball Float & Lever Assly , SLR Valve seat :
15 0.5 - -
29 Steam Trap AISI304 Nos. - Inch Dia
Strainer screen : AISI 304 , 40 Mesh 20 0.75 0 Nos. - Inch Dia - -
Steel Ball : SS 420C, 25 1 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 40 1.5 0 Nos. - Inch Dia - -
(Make:Spirax, Uni Klinger), Flange end to #150 50 2 0 Nos. - Inch Dia - -
- Inch Dia - -
PRS station having moisture seperator, drain valve and trap
30 PRS pressure gauge,isolation valve,safety relief valve 50 2 0 Nos. - Inch Dia - -
End Connections:flange / Body Materials:Carbon steel 125 5 0 Nos. - Inch Dia - -
Page 46 CONDENSATE
Bill Of Quantity Of CONDENSATE Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
31 Flow Trap Assembly Body & Cover :ASTM A216 GR WCB, 20 0.75 18 Nos. 13.50 Inch Dia - -
Valve seat, Ball Float & Lever Assly , SLR Valve seat :
25 1 5 - -
AISI304 Nos. 5.00 Inch Dia
Strainer screen : AISI 304 , 40 Mesh 40 1.5 4 Nos. 6.00 Inch Dia - -
Steel Ball : SS 420C, 50 2 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 65 2.5 0 Nos. - Inch Dia - -
TOTAL 24.50 Inch Dia - -
32 Drain Trap Rating: 600# (BSPT (M) Thread),Body & Disc: AISI 420 15 0.5 6 Nos. 3.00 Inch Dia - -
Main Bore Cap: AISI 420,ISO tube :SS 20 0.75 Nos. - Inch Dia - -
Filter: AISI 304, Perforated sheet,Filter cap: AISI 420 25 1 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 40 1.5 0 Nos. - Inch Dia - -
TOTAL 3.00 Inch Dia - -
Grand Total - -
Page 47 CONDENSATE
Bill Of Quantity Of DUST EXTRACTION Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 0 Meter 0.00 Inch Meter - -
25 1 0 Meter 0.00 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 15 40 1.5 0 Meter 0.00 Inch Meter - -
Heavy bevelled end 50 2 0 Meter 0.00 Inch Meter - -
65 2.5 0 Meter 0.00 Inch Meter - -
MS Pipes to IS-1239, Heavy, ERW, Galvanized - BSPT (M) ( 80 3 0 Meter 0.00 Inch Meter - -
100 4 202 Meter 808.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 808.00 Inch Meter - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. 0 Inch Dia - -
5 Equal Tee Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. - Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 0 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Nos. -
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 Inch Dia - -
Part 2 Smls.upto 150 nb Nos. -
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. - Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 0 Nos. - Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. - Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. - Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Carbon steel 90º Elbows, material to A 105 Seamless,3000 20x15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
25x15 0 - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Nos. - Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25x20 0 - -
Part 2 Smls.upto 150 nb Nos. - Nos.
Dimensional suitability to ANSI B 16.9 32x15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40x15 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40x20 0 Nos. - Nos. - -
7 Concentric Carbon steel 90º Elbows, material to A 105 Seamless,3000 20X15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
25X15 0 - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Reducer Nos. - Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25X20 0 - -
Part 2 Smls.upto 150 nb Nos. - Nos.
Dimensional suitability to ANSI B 16.9 40X15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40X20 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40X25 0 Nos. - Nos. - -
Seamless, Sch. 40. 50x15 0 Nos. - Nos. - -
Dimensional suitability to ANSI B 16.9 50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded with hexagonal nuts & M14X65 0 Nos. - Nos. - -
a pair of washers,IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitabl 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos. -
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 22 Nos. 11 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 0 Nos. 0 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos.
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 11.00 Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
18 Air vent Assembly With ASTM A 105 body, 15 0.5 0 Nos. 0 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 0 - Inch Dia 0 0
-
Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with
Pressure gauge 15 0.5 0 0 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
Grand Total - -
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 0 Meter 0.00 Inch Meter - -
25 1 0 Meter 0.00 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 40 1.5 122 Meter 183.00 Inch Meter - -
Heavy bevelled end 50 2 0 Meter 0.00 Inch Meter - -
65 2.5 0 Meter 0.00 Inch Meter - -
MS Pipes to IS-1239, Heavy, ERW, Galvanized - BSPT (M 80 3 0 Meter 0.00 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 211.64 Meter 1058.20 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 1241.20 Inch Meter - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
ERW. Above 150NB (Above 250 NB Fabricated on 20 0.75 0 0 Inch Dia - -
Long radius Site) Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 0 Inch Dia - -
(R-1.5D) Part 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. 0 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 48 Nos. 72 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. 0 Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. 0 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 20 Nos. 100 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 172.00 Inch Dia - -
5 Equal Tee Carbon steel 90º Elbows, material to A 105 Seamless,3 15 0.5 0 Nos. - Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
ERW. Above 150NB (Above 250 NB Fabricated on 20 0.75 0 Inch Dia - -
Site) Nos. -
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 Inch Dia - -
Part 2 Smls.upto 150 nb Nos. -
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. - Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 0 Nos. - Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. - Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. - Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Carbon steel 90º Elbows, material to A 105 Seamless,3 20x15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
ERW. Above 150NB (Above 250 NB Fabricated on 25x15 0 - -
Site) Nos. - Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25x20 0 - -
Part 2 Smls.upto 150 nb Nos. - Nos.
Dimensional suitability to ANSI B 16.9 32x15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40x15 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40x20 0 Nos. - Nos. - -
Seamless, Sch. 40. 40x25 0 Nos. - Nos. - -
Dimensional suitability to ANSI B 16.9 50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 0 - - -
Page 55 VACUUM
Bill Of Quantity Of VACUUM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
7 Concentric Carbon steel 90º Elbows, material to A 105 Seamless,3 20X15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
ERW. Above 150NB (Above 250 NB Fabricated on 25X15 0 - -
Reducer Site) Nos. - Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25X20 0 - -
Part 2 Smls.upto 150 nb Nos. - Nos.
Dimensional suitability to ANSI B 16.9 40X15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40X20 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40X25 0 Nos. - Nos. - -
Seamless, Sch. 40. 50x15 0 Nos. - Nos. - -
Dimensional suitability to ANSI B 16.9 50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
Page 56 VACUUM
Bill Of Quantity Of VACUUM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded with hexagonal nuts & M14X65 0 Nos. - Nos. - -
a pair of washers,IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 t 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suit 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in
any insulation pipe shall be provided with extended 100 4 0 Inch Dia - -
stem. Nos. -
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 10 Nos. 5 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 9 Nos. 13.5 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in
any insulation pipe shall be provided with extended 100 4 0 0 Inch Dia - -
stem. Nos.
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 18.50 Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
Page 57 VACUUM
Bill Of Quantity Of VACUUM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
18 Air vent Assembly WiASTM A 105 body, 15 0.5 0 Nos. 0 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 0 - Inch Dia 0 0
-
Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with
Pressure gauge 15 0.5 0 0 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
Page 58 VACUUM
Bill Of Quantity Of VACUUM Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
40 1.5 0 Nos. - Inch Dia - -
50 2 0 Nos. - Inch Dia - -
65 2.5 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
Grand Total - -
Page 59 VACUUM
Bill Of Quantity Of TOILET FLUSH Piping
Supply Supply Erection Erection
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit Qty Unit
Rate Amount Rate Amount
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 0 Meter 0.00 Inch Meter - -
25 1 0 Meter 0.00 Inch Meter - -
32 1.25 0.65 Meter 0.81 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 15 40 1.5 149.63 Meter 224.45 Inch Meter - -
Heavy bevelled end 50 2 0 Meter 0.00 Inch Meter - -
65 2.5 0 Meter 0.00 Inch Meter - -
MS Pipes to IS-1239, Heavy, ERW, Galvanized - BSPT (M) ( 80 3 0 Meter 0.00 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 225.26 Inch Meter - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 0 0 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Long radius Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 0 Inch Dia - -
(R-1.5D) Part 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 16 Nos. 20 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 6 Nos. 9 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. 0 Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. 0 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 29.00 Inch Dia - -
5 Equal Tee Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. - Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 0 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Nos. -
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 Inch Dia - -
Part 2 Smls.upto 150 nb Nos. -
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. - Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 0 Nos. - Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. - Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. - Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Carbon steel 90º Elbows, material to A 105 Seamless,3000 20x15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
25x15 0 - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Nos. - Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25x20 0 - -
Part 2 Smls.upto 150 nb Nos. - Nos.
Dimensional suitability to ANSI B 16.9 32x15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40x15 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40x20 0 Nos. - Nos. - -
Seamless, Sch. 40. 40x25 0 Nos. - Nos. - -
Dimensional suitability to ANSI B 16.9 50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 0 - - -
7 Concentric Carbon steel 90º Elbows, material to A 105 Seamless,3000 20X15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
25X15 0 - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Reducer Nos. - Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25X20 0 - -
Part 2 Smls.upto 150 nb Nos. - Nos.
Dimensional suitability to ANSI B 16.9 40X15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40X20 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40X25 0 Nos. - Nos. - -
Seamless, Sch. 40. 50x15 0 Nos. - Nos. - -
Dimensional suitability to ANSI B 16.9 50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
8 Eccentric Carbon steel 90º Elbows, material to A 105 Seamless,3000 20X15 0 Nos. - Nos. - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
Reducer 25X15 0 Nos. - Nos. - -
ERW. Above
R=1.5D, ASTM150NB (Above 250
A 234-WPB, SW,NBBE,Fabricated
B16.9, IS on Site)
1239
25X20 0 Nos. - Nos. - -
Part 2 Smls.upto 150 nb
Dimensional suitability to ANSI B 16.9 40X15 0 Nos. - Nos. - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40X20 0 Nos. - Nos. - -
material shall be wrought steel A 234 Gr. WPB, 40X25 0 Nos. - Nos. - -
Seamless, Sch. 40. 50x15 0 Nos. - Nos. - -
Dimensional suitability to ANSI B 16.9 50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded with hexagonal nuts & M14X65 0 Nos. - Nos. - -
a pair of washers,IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitabl 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos. -
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 0 Nos. 0 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 25 Nos. 18.75 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 0 Nos. 0 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos.
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 18.75 Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
Application : Water 65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
18 Air vent Assembly With ASTM A 105 body, 15 0.5 0 Nos. 0 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 0 - Inch Dia 0 0
-
Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with
Pressure gauge 15 0.5 0 0 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
Grand Total - -
1 Pipes (in Mtrs) Carbon steel black pipe to IS 1239 / IS 3589 ERW,BE,BW 15 0.5 0 Meter 0.00 Inch Meter - -
Heavy plan end 20 0.75 0 Meter 0.00 Inch Meter - -
25 1 0 Meter 0.00 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Carbon steel black pipe to IS 1239, ERW, BE, BW upto 15 40 1.5 210 Meter 315.00 Inch Meter - -
Heavy bevelled end 50 2 20 Meter 40.00 Inch Meter - -
65 2.5 0 Meter 0.00 Inch Meter - -
80 3 0 Meter 0.00 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 355.00 Inch Meter - -
2 Flanges Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Slip On Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 0 Nos. 0 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
SORF, SF complete with Nuts, Bolts & Washers / 32 1.25 0 - -
GASKETS Nos. 0 Inch Dia
40 1.5 0 Nos. 0 Inch Dia - -
50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - - -
3 Flanges blind Carbon Steel flanges of IS 2062 Gr-A, 15 0.5 0 Nos. 0 Inch Dia - -
Blind Type,Serrated Finish,Raised face 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5 25 1 0 Nos. 0 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
Flanges to suit ASA 150# pressROe Rating,ASTM A 105,
SORF, SF complete with Nuts, Bolts & Washers / 40 1.5 0 0 Inch Dia - -
GASKETS Nos.
50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
4 Elbows 90º Carbon steel 90º Elbows, material to A 105 Seamless,3000 15 0.5 0 Nos. 0 Inch Dia - -
,R=1.5D, ASTM A 234-WPB, BW, BE, B16.9, IS 3589
20 0.75 0 0 Inch Dia - -
ERW. Above 150NB (Above 250 NB Fabricated on Site)
Long radius Nos.
R=1.5D, ASTM A 234-WPB, SW, BE, B16.9, IS 1239
25 1 0 0 Inch Dia - -
(R-1.5D) Part 2 Smls.upto 150 nb Nos.
Dimensional suitability to ANSI B 16.9 32 1.25 0 Nos. 0 Inch Dia - -
Carbon steel 90º Elbows, material per ANSI B 16.9 40 1.5 0 Nos. 0 Inch Dia - -
material shall be wrought steel A 234 Gr. WPB, 50 2 0 Nos. 0 Inch Dia - -
Seamless, Sch. 40. 65 2.5 0 Nos. 0 Inch Dia - -
Dimensional suitability to ANSI B 16.9 80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
5 Equal Tee Equal Tee, material as per A 105/ASTM A 105, SW end, 3 15 0.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11/ B-16.11 / IS1239(II) 20 0.75 0 Nos. - Inch Dia - -
25 1 0 Nos. - Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
Equal Tee, material as per ASTM A 234 Gr. WPB 40 1.5 0 Nos. - Inch Dia - -
Dimention as per ANSI 16.11 50 2 0 Nos. - Inch Dia - -
65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee Unequal Tee, material as per A 105, SW end, 3000# 20x15 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 25x15 0 Nos. - Nos. - -
Unequal Tee, material as per ASTM A 234 Gr. WPB 25x20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 32x15 0 Nos. - Nos. - -
40x15 0 Nos. - Nos. - -
40x20 0 Nos. - Nos. - -
40x25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 0 - - -
7 Concentric Reducer, material as per A 105/ASTM A 105/, B 16.11, SW 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
8 Eccentric Reducer, material as per A 105/ASTM A 105/, B 16.11, SW 20X15 0 Nos. - Nos. - -
Reducer Dimention as per ANSI 16.11/B-16.11 / IS1239(II) 25X15 0 Nos. - Nos. - -
25X20 0 Nos. - Nos. - -
40X15 0 Nos. - Nos. - -
Reducer, material as per ASTM A 234 Gr. WPB 40X20 0 Nos. - Nos. - -
Dimention as per ANSI 16.11 40X25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65 x 50 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100 x 32 0 Nos. - Nos. - -
125 x 50 0 Nos. - Nos. - -
125 x 80 0 Nos. - Nos. - -
125 x 100 0 Nos. - Nos. - -
150 x 100 0 Nos. - Nos. - -
TOTAL - Nos. - -
9 Nipple, Two End CS, heavey material to IS 1239, BSPP, 6" long 15 0.5 0 Nos. 0 Inch Dia - -
A 106-B, Sch-30, PE, 100 mm Long, with both side
20 0.75 0 0 Inch Dia - -
Threaded screwed end to BSPT(M) Nos.
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts Carbon steel black machined hexagonal headed M14X60 0 Nos. - Nos. - -
bolts, fully threaded with hexagonal nuts & M14X65 0 Nos. - Nos. - -
a pair of washers,IS 1367 CL.4.6/4.0. M14X70 0 Nos. - Nos. - -
and ASTM A 154 Gr.24, Duly galvanised. M14X75 0 Nos. - Nos. - -
Make: Laxmi precision / unbrako M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Pre cut Ring Gasket, Asbestos aramide fibre gasket, 3 thk, 15 0.5 0 Nos. - Nos. - -
suitable for class ASA 150#, RF flange Dimensions suitabl 20 0.75 0 Nos. - Nos. - -
to ANSI B 1 6.21 / ,ANSI B-16.5. (Temp: 1500C To 00C) 25 1 0 Nos. - Nos. - -
32 1.25 0 Nos. - Nos. - -
Make 40 1.5 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 50 2 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
12 Ball Valves Rating: 600#, BSPT (F) 15 0.5 0 Nos. - Inch Dia - -
(Secrewed End) Body: ASTM A 105 (Three Piece, Floating design) 20 0.75 0 Nos. - Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. - Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 32 1.25 0 Nos. - Inch Dia - -
Steam: AISI 304 40 1.5 0 Nos. - Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. - Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. - Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. - Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos. -
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
13 Ball Valves Rating: 150#, ANSI B16.5 15 0.5 0 Nos. 0 Inch Dia - -
(Flange End) Body: A 216 Gr. WC B (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8 25 1 0 Nos. 0 Inch Dia - -
Steam: AISI 304 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A216 Gr. WCB 40 1.5 0 Nos. 0 Inch Dia - -
Hardware: A193 Gr. B 7/ A194 Gr. 2H (Galvanised) 50 2 0 Nos. 0 Inch Dia - -
Handle: CS, zinc coated having PVC cap. 65 2.5 0 Nos. 0 Inch Dia - -
( Make: Audco, BDK) 80 3 0 Nos. 0 Inch Dia - -
Note: Valves in chilled water, Hot water, Brine or in any
100 4 0 0 Inch Dia - -
insulation pipe shall be provided with extended stem.
Nos.
complete with Nuts, Bolts & Washers / GASKETS 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
Butterfly Valves Disc : ASTM A351 Gr CF8/CF8M SS Fully polished / A 15 0.5 0 Inch Dia - -
14 216-WCB,API-609, Nos. -
Seat material : White nitrile / EPDM (tasteless), 20 0.75 0 Nos. - Inch Dia - -
Body :CI 25 1 0 Nos. - Inch Dia - -
HANDLE : Lever Operated for size upto 150 mm 32 1.25 0 Nos. - Inch Dia - -
HANDLE : Gear Operated for size 200 mm &above 40 1.5 0 Nos. - Inch Dia - -
End Connection : Wafer Type (Sandwitched type) 50 2 0 Nos. - Inch Dia - -
Rating: 150#, ANSI B16.5, 100% Leak Test 65 2.5 0 Nos. - Inch Dia - -
PN-10 rating 80 3 0 Nos. - Inch Dia - -
Shaft: AISI 410 PTFE coated for permanent dry lubrication 100 4 0 Inch Dia - -
Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Design Standard: EN 558-1 20 0.75 0 Nos. 0 Inch Dia - -
Body Cast Iron, ASTM A 126 25 1 0 Nos. 0 Inch Dia - -
Disc A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Star ASTM A 351 Gr. CF8 / CF8M (Cast Stainless Steel) 40 1.5 0 Nos. 0 Inch Dia - -
Spring AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Circlip AISI 304 / AISI 316 65 2.5 0 Nos. 0 Inch Dia - -
Body Seat Soft Rubber, EPDM / BUNA-N / VITON 80 3 0 Nos. 0 Inch Dia - -
PN-10 Rating 100 4 0 Nos. 0 Inch Dia - -
Seat leakage : Zero leak / tight shut off 125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351,ASTM A 216 Gr. WCB 15 0.5 0 Nos. 0 Inch Dia - -
18 Air vent Assembly With ASTM A 105 body, 15 0.5 0 Nos. 0 Inch Dia - -
Valve ASTM A 276 valve seat 20 0.75 0 Nos. 0 Inch Dia - -
with inbuilt screen, air bottle, 25 1 0 Nos. 0 Inch Dia - -
Screwed to BSPP, 32 1.25 0 Nos. 0 Inch Dia - -
CS ,stand pipe ,IS 1239 `H' Class 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 0 - Inch Dia 0 0
-
Pressure gauge Type: SS 316 Diaphram Type/ 0 - 10 kg/cm2 with 15 0.5 0 0 - -
19 syphone Nos. Nos.
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
SUITABLE WITH CONNECTING IN RS485(MODBUS)
TEMP:at 0 to 100 deg centi, Electrical conductivity: >300
0 - -
20 Flow meter μS/cm, FLOW CAPACITY: 600 M3/HR 40 1.5 Nos. - Nos.
Application range: Continuous measurement of
instantaneous and totalized flow, velocity, mass flow (at 0 - -
constant density) 80 3 Nos. - Nos.
Large back lit liquid crystal display, Supply voltage: 110 / 0 - -
220 VAC (4 wire) 150 6 Nos. - Nos.
Push buttons / Hall Effect sensors for programming, 0 - -
Flange end connection 250 10 Nos. - Nos.
TOTAL - - -
22 Check valve same as non return valve specification 25 1 0 Nos. - Inch Dia 1 - -
TOTAL - Inch Dia - -
26 Safety Valve(Pilot Piston type) Material outlet body WCB, CF8M, CF8 15 0.5 0 Nos. - Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange
25 1 0 - -
rating inlet PN 10 - PN 250/ 400 Nos. - Inch Dia
Spring loaded, Screwed lifting lever cap, Set Pressure 32 1.25 0 - -
0.49 - 250 bar Nos. - Inch Dia
TOTAL - Inch Dia - -
27 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(Screw End) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Connection type: screwed end BSPT 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
28 Piston Valve Body & Bonnet :Forged Carbon Steel ASTM A105N 15 0.5 0 Nos. - Inch Dia - -
(FlangeEnd) Piston :Stainless Steel ASTM A 276 TYPE 304 20 0.75 0 Nos. - Inch Dia - -
Spindle :Stainless Steel ASTM A 276 TYPE 410 25 1 0 Nos. - Inch Dia - -
Stud: Carbon Steel ASTM A193 Gr. B7, 32 1.25 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 40 1.5 0 Nos. - Inch Dia - -
Spacer :Stainless Steel ASTM A 276 TYPE 410 50 2 0 Nos. - Inch Dia - -
Gap ring :Stainless Steel ASTM A 276 TYPE 410 65 2.5 0 Nos. - Inch Dia - -
Sealing stack :S.S. Reinforced Graphite 80 3 0 Nos. - Inch Dia - -
Flange type: ANSI 150 100 4 0 Nos. - Inch Dia - -
Belleville Washer: Spring Steel 125 5 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 150 6 0 Nos. - Inch Dia - -
Make: (Spirax Marshall, Uni Klinger) 200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
Body & Cover :ASTM A216 GR WCB,
Valve seat, Ball Float & Lever Assly , SLR Valve seat :
15 0.5 - -
29 Steam Trap AISI304 Nos. - Inch Dia
Strainer screen : AISI 304 , 40 Mesh 20 0.75 0 Nos. - Inch Dia - -
Steel Ball : SS 420C, 25 1 0 Nos. - Inch Dia - -
Valve seat Gasket : AISI 304, DRAIN PLUG : CS 40 1.5 0 Nos. - Inch Dia - -
(Make:Spirax, Uni Klinger), Flange end to #150 50 2 0 Nos. - Inch Dia - -
- Inch Dia - -
PRS station having moisture seperator, drain valve and trap
30 PRS pressure gauge,isolation valve,safety relief valve 50 2 0 Nos. - Inch Dia - -
End Connections:flange / Body Materials:Carbon steel 125 5 0 Nos. - Inch Dia - -
32 Drain Trap Rating: 600# (BSPT (M) Thread),Body & Disc: AISI 420 15 0.5 0 Nos. - Inch Dia - -
Main Bore Cap: AISI 420,ISO tube :SS 20 0.75 Nos. - Inch Dia - -
Filter: AISI 304, Perforated sheet,Filter cap: AISI 420 25 1 0 Nos. - Inch Dia - -
Hardware: A 193 Gr.137, A194 Gr. 2H, Galvanised 40 1.5 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
Grand Total - -
1 Pipes (in Mtrs) Stainless steel welded pipes, material to ASTM A 312 TP 15 0.5 396.3 Meter 198.15 Inch Meter - -
304 Sch. 40S, dimensions to ANSI B 36.19, plain ends. 20 0.75 145.7 Meter 109.27 Inch Meter - -
25 1 38.802 Meter 38.80 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Stainless steel welded pipes, material to ASTM A 312 TP 40 1.5 60 Meter 90.00 Inch Meter - -
304 Sch. 10S dimensions to ANSI B 36.19 BE to ANSI 16.25 50 2 112.15 Meter 224.30 Inch Meter - -
65 2.5 36.565 Meter 91.41 Inch Meter - -
80 3 0 Meter 0.00 Inch Meter - -
100 4 45 Meter 180.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 931.94 Inch Meter - -
2 Flanges Slip On Type flanges,Serrated Finish,Raised face 15 0.5 2 Nos. 1 Inch Dia - -
material ASTM A 240 Gr. 304, Dimensional Suitability to 20 0.75 4 Nos. 3 Inch Dia - -
ANSI B 16.5 / ASTM A 182 F 304, ASME B16.5; ASA 150# 25 1 1 Nos. 1 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
50 2 2 Nos. 4 Inch Dia - -
65 2.5 20 Nos. 50 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 59.00 - -
3 Flanges blind Slip On Type flanges,Serrated Finish,Raised face 15 0.5 2 Nos. 1 Inch Dia - -
material, A 182 F-304 or A-403 WP304, ERW, Sch. 40s, 20 0.75 5 Nos. 3.75 Inch Dia - -
Dimensional Suitability to ANSI B 16.5; ASA 150# 25 1 1 Nos. 1 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
50 2 1 Nos. 2 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 7.75 Inch Dia - -
4 Elbows 90º A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickness to 15 0.5 133 Nos. 66.5 Inch Dia - -
Long radius match with pipe thickness. Dimension as per ANSI B 16.11 / 20 0.75 12 Nos. 9 Inch Dia - -
(R-1.5D) ASME B 16.9 25 1 6 Nos. 6 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 40 1.5 0 Nos. 0 Inch Dia - -
pipe thickness. Dimension as per ANSI B 16.11 50 2 4 Nos. 8 Inch Dia - -
65 2.5 10 Nos. 25 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 114.50 Inch Dia - -
5 Equal Tee A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickness to 15 0.5 0 Nos. - Inch Dia - -
match with pipe thickness. Dimension as per ANSI B 16.11/ 20 0.75 0 Nos. - Inch Dia - -
ASME B16.5 25 1 0 Nos. - Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
40 1.5 0 Nos. - Inch Dia - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 50 2 0 Nos. - Inch Dia - -
pipe thickness. Dimension as per ANSI B 16.11/ ASME B16.5 65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
6 Unequal Tee A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickness to 20x15 0 Nos. - Nos. - -
match with pipe thickness. Dimension as per ANSI B 16.11 25x15 0 Nos. - Nos. - -
ASME B16.5 , 150# RF 25x20 0 Nos. - Nos. - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 32x15 0 Nos. - Nos. - -
pipe thickness. Dimension as per ANSI B 16.11 40x15 0 Nos. - Nos. - -
40x20 0 Nos. - Nos. - -
40x25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 0 - - -
9 Nipple, Two End SS 304, material is ASTM A 240 Gr. 304 to BSPP (M), 6" long 15 0.5 0 Nos. 0 Inch Dia - -
Threaded 20 0.75 0 Nos. 0 Inch Dia - -
25 1 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
10 Nuts & Bolts ASTM A193 Gr.B8 BOLTS & A194 Gr.8 M14X60 0 Nos. - Nos. - -
SS Nut & Bolt machined hexagonal headed bolts, M14X65 0 Nos. - Nos. - -
Fully threaded M14X70 0 Nos. - Nos. - -
Dimention to suit with ANSI B 18.2.1 & B 18.2.2 M14X75 0 Nos. - Nos. - -
M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Ring gaskets asbestos free, 3mm thk, 15 0.5 0 Nos. - Nos. - -
suitable for insertion between raised face 20 0.75 0 Nos. - Nos. - -
of ANSI B 16.5, ASA 150#, SORF flanges 25 1 0 Nos. - Nos. - -
MAKE: 32 1.25 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 40 1.5 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 50 2 0 Nos. - Nos. - -
65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
13 Ball Valves Rating: Flanged Cl 150 15 0.5 83 Nos. 41.5 Inch Dia - -
(Flange End) Body: ASTM A351 Grade CF8M (Three Piece, Floating design) 20 0.75 0 Nos. 0 Inch Dia - -
Ball: A351 Gr. CF 8M 25 1 2 Nos. 2 Inch Dia - -
Stem: SS ASTM A479 316 32 1.25 0 Nos. 0 Inch Dia - -
Seat: PTFE; Gland: A351 Gr. CF 8 40 1.5 0 Nos. 0 Inch Dia - -
Handle: SS 304 having PVC cap. 50 2 0 Nos. 0 Inch Dia - -
65 2.5 9 Nos. 22.5 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 66.00 Inch Dia - -
Butterfly Valves Disc : ASTM A351 Gr CF8/CF8M SS Fully polished / A 216- 15 0.5 0 Inch Dia - -
14 WCB,API-609, Nos. -
Seat material : White nitrile / EPDM (tasteless), 20 0.75 0 Nos. - Inch Dia - -
Body :CI 25 1 0 Nos. - Inch Dia - -
HANDLE : Lever Operated for size upto 150 mm 32 1.25 0 Nos. - Inch Dia - -
HANDLE : Gear Operated for size 200 mm &above 40 1.5 0 Nos. - Inch Dia - -
End Connection : Wafer Type (Sandwitched type) 50 2 0 Nos. - Inch Dia - -
Rating: 150#, ANSI B16.5, 100% Leak Test 65 2.5 0 Nos. - Inch Dia - -
PN-10 rating 80 3 0 Nos. - Inch Dia - -
Shaft: AISI 410 PTFE coated for permanent dry lubrication 100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Body :A351 Gr.CF8M Cast Stainless Steel 20 0.75 0 Nos. 0 Inch Dia - -
Disc : A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 25 1 0 Nos. 0 Inch Dia - -
Star :ASTM A 351 Gr. CF8 and CF8M (Cast Stainless Steel) 32 1.25 0 Nos. 0 Inch Dia - -
Spring :AISI 304 / AISI 316 40 1.5 0 Nos. 0 Inch Dia - -
Circlip :AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Body Seat : Cladded 13% Cr / Metal to Metal / Viton / BUNA-N Soft 65 2.5 0 0 Inch Dia - -
Seat Nos.
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351 Grade CF8M 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
Size of Mess : 40 25 1 0 Nos. 0 Inch Dia - -
Flange end ASA 150 # b 16.5 RF 32 1.25 0 Nos. 0 Inch Dia - -
Gasket cover : Rubber Gasket ( Nitrile Gasket) 40 1.5 0 Nos. 0 Inch Dia - -
PN-10 Rating 50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
18 Air vent Assembly With Body / cover : Brass OT 58 15 0.5 0 Nos. 0 Inch Dia - -
Valve Plug: EPDM rubber; Seals: NBR rubber 20 0.75 0 Nos. 0 Inch Dia - -
Spring : Stainless steel 25 1 0 Nos. 0 Inch Dia - -
Cap : Polyamide ; Lever Polyacetal; 32 1.25 0 Nos. 0 Inch Dia - -
Float : High density expanded polyethylene 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 0 - Inch Dia 0 0
-
19 Pressure gauge Type: SS 316 Diaphram Type 15 0.5 0 Nos. 0 Nos. - -
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
SUITABLE WITH CONNECTING IN RS485(MODBUS)
TEMP: at 0 to 100 deg centi, Electrical conductivity: >300 μS/cm,
1 - -
20 Flow meter FLOW CAPACITY: 600 M3/HR 40 1.5 Nos. 1.00 Nos.
Application range: Continuous measurement of instantaneous and
0 - -
totalized flow, velocity, mass flow (at constant density) 80 3 Nos. - Nos.
Large back lit liquid crystal display, Supply voltage: 110 / 220 VAC
0 - -
(4 wire) 150 6 Nos. - Nos.
Push buttons / Hall Effect sensors for programming, Flange end 0 - -
connection 250 10 Nos. - Nos.
TOTAL 1.00 - -
22 Check valve same as non return valve specification 25 1 0 Nos. - Inch Dia 0 - -
TOTAL - Inch Dia - -
26 Safety Valve(Pilot Piston type) Material outlet body WCB, CF8M, CF8 15 0.5 1 Nos. 0.50 Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange rating inlet
25 1 0 - -
PN 10 - PN 250/ 400 Nos. - Inch Dia
32 1.25 0 - -
Spring loaded, Screwed lifting lever cap, Set Pressure 0.49 - 250 bar Nos. - Inch Dia
TOTAL 0.50 Inch Dia - -
Grand Total - -
1 Pipes (in Mtrs) Stainless steel welded pipes, material to ASTM A 312 TP 15 0.5 142.25 Meter 71.13 Inch Meter - -
304 Sch. 40S, dimensions to ANSI B 36.19, plain ends. 20 0.75 0 Meter 0.00 Inch Meter - -
25 1 250 Meter 250.00 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Stainless steel welded pipes, material to ASTM A 312 TP 40 1.5 10 Meter 15.00 Inch Meter - -
304 Sch. 10S dimensions to ANSI B 36.19 BE to ANSI
50 2 20 Meter 40.00 Inch Meter - -
16.25
65 2.5 0 Meter 0.00 Inch Meter - -
80 3 0 Meter 0.00 Inch Meter - -
100 4 0 Meter 0.00 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 0 Meter 0.00 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 376.13 Inch Meter - -
2 Flanges Slip On Type flanges,Serrated Finish,Raised face 15 0.5 80 Nos. 40 Inch Dia - -
material ASTM A 240 Gr. 304, Dimensional Suitability to 20 0.75 0 Nos. 0 Inch Dia - -
ANSI B 16.5 / ASTM A 182 F 304, ASME B16.5; ASA 150 25 1 69 Nos. 69 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
40 1.5 2 Nos. 3 Inch Dia - -
50 2 16 Nos. 32 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 144.00 - -
3 Flanges blind Slip On Type flanges,Serrated Finish,Raised face 15 0.5 0 Nos. 0 Inch Dia - -
material, A 182 F-304 or A-403 WP304, ERW, Sch. 40s, 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5; ASA 150# 25 1 2 Nos. 2 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 2.00 Inch Dia - -
4 Elbows 90º A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickne 15 0.5 40 Nos. 20 Inch Dia - -
Long radius match with pipe thickness. Dimension as per ANSI B 16.11 20 0.75 0 Nos. 0 Inch Dia - -
(R-1.5D) ASME B 16.9 25 1 20 Nos. 20 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 40 1.5 0 Nos. 0 Inch Dia - -
pipe thickness. Dimension as per ANSI B 16.11 50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 40.00 Inch Dia - -
5 Equal Tee A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickne 15 0.5 0 Nos. - Inch Dia - -
match with pipe thickness. Dimension as per ANSI B 16.11 20 0.75 0 Nos. - Inch Dia - -
ASME B16.5 25 1 4 Nos. 4.00 Inch Dia - -
32 1.25 0 Nos. - Inch Dia - -
40 1.5 0 Nos. - Inch Dia - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 50 2 0 Nos. - Inch Dia - -
pipe thickness. Dimension as per ANSI B 16.11/ ASME B1 65 2.5 0 Nos. - Inch Dia - -
80 3 0 Nos. - Inch Dia - -
100 4 0 Nos. - Inch Dia - -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL 4.00 Inch Dia - -
6 Unequal Tee A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickne 20x15 0 Nos. - Nos. - -
match with pipe thickness. Dimension as per ANSI B 16.11 25x15 20 Nos. 20.00 Nos. - -
ASME B16.5 , 150# RF 25x20 0 Nos. - Nos. - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match with 32x15 0 Nos. - Nos. - -
pipe thickness. Dimension as per ANSI B 16.11 40x15 0 Nos. - Nos. - -
40x20 0 Nos. - Nos. - -
40x25 0 Nos. - Nos. - -
50x15 0 Nos. - Nos. - -
50x20 0 Nos. - Nos. - -
50x25 0 Nos. - Nos. - -
50X32 0 Nos. - Nos. - -
50x40 0 Nos. - Nos. - -
65X20 0 Nos. - Nos. - -
65X40 0 Nos. - Nos. - -
65X50 0 Nos. - Nos. - -
80X15 0 Nos. - Nos. - -
80X20 0 Nos. - Nos. - -
80x25 0 Nos. - Nos. - -
80x40 0 Nos. - Nos. - -
80x50 0 Nos. - Nos. - -
80X65 0 Nos. - Nos. - -
100X20 0 Nos. - Nos. - -
100X25 0 Nos. - Nos. - -
100X40 0 Nos. - Nos. - -
100X50 0 Nos. - Nos. - -
100X65 0 Nos. - Nos. - -
100X80 0 Nos. - Nos. - -
125X100 0 Nos. - Nos. - -
250x25 0 Nos. - Nos. - -
250x40 0 Nos. - Nos. - -
250x65 0 Nos. - Nos. - -
250x80 0 Nos. - Nos. - -
TOTAL 20 20.00 - -
10 Nuts & Bolts ASTM A193 Gr.B8 BOLTS & A194 Gr.8 M14X50 300 Nos. 300.00 Nos. - -
SS Nut & Bolt machined hexagonal headed bolts, M14X65 0 Nos. - Nos. - -
Fully threaded M14X70 0 Nos. - Nos. - -
Dimention to suit with ANSI B 18.2.1 & B 18.2.2 M14X75 0 Nos. - Nos. - -
M16x70 36 Nos. 36.00 Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL 336.00 Nos. - -
11 Gaskets Ring gaskets asbestos free, 3mm thk, 15 0.5 40 Nos. 40.00 Nos. - -
suitable for insertion between raised face 20 0.75 0 Nos. - Nos. - -
of ANSI B 16.5, ASA 150#, SORF flanges 25 1 35 Nos. 35.00 Nos. - -
MAKE: 32 1.25 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 40 1.5 1 Nos. 1.00 Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 50 2 8 Nos. 8.00 Nos. - -
65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL 84.00 Nos. - -
Grand Total - -
1 Pipes (in Mtrs) Stainless steel welded pipes, material to ASTM A 312 TP 15 0.5 0 Meter 0.00 Inch Meter - -
304 Sch. 40S, dimensions to ANSI B 36.19, plain ends. 20 0.75 0 Meter 0.00 Inch Meter - -
25 1 0 Meter 0.00 Inch Meter - -
32 1.25 0 Meter 0.00 Inch Meter - -
Stainless steel welded pipes, material to ASTM A 312 TP 40 1.5 0 Meter 0.00 Inch Meter - -
304 Sch. 10S dimensions to ANSI B 36.19 BE to ANSI 16.2 50 2 0 Meter 0.00 Inch Meter - -
65 2.5 0 Meter 0.00 Inch Meter - -
80 3 0 Meter 0.00 Inch Meter - -
100 4 128.4 Meter 513.60 Inch Meter - -
125 5 0 Meter 0.00 Inch Meter - -
150 6 154.3 Meter 925.80 Inch Meter - -
200 8 0 Meter 0.00 Inch Meter - -
250 10 0 Meter 0.00 Inch Meter - -
TOTAL 1439.40 Inch Meter - -
2 Flanges Slip On Type flanges,Serrated Finish,Raised face 15 0.5 0 Nos. 0 Inch Dia - -
material ASTM A 240 Gr. 304, Dimensional Suitability to 20 0.75 0 Nos. 0 Inch Dia - -
ANSI B 16.5 / ASTM A 182 F 304, ASME B16.5; ASA 150 25 1 0 Nos. 0 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 6 Nos. 36 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 36.00 - -
3 Flanges blind Slip On Type flanges,Serrated Finish,Raised face 15 0.5 0 Nos. 0 Inch Dia - -
material, A 182 F-304 or A-403 WP304, ERW, Sch. 40s, 20 0.75 0 Nos. 0 Inch Dia - -
Dimensional Suitability to ANSI B 16.5; ASA 150# 25 1 0 Nos. 0 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
40 1.5 0 Nos. 0 Inch Dia - -
50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 6 Nos. 36 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 36.00 Inch Dia - -
4 Elbows 90º A 182 F-304 or A-403 WP304, ERW, Sch. 40s, wall thickne 15 0.5 0 Nos. 0 Inch Dia - -
match with pipe thickness. Dimension as per ANSI B
20 0.75 0 0 Inch Dia - -
Long radius 16.11 / Nos.
(R-1.5D) ASME B 16.9 25 1 0 Nos. 0 Inch Dia - -
32 1.25 0 Nos. 0 Inch Dia - -
A351 Gr.CF8. ERW, Sch. 10s, wall thickness to match
40 1.5 0 0 Inch Dia - -
with Nos.
pipe thickness. Dimension as per ANSI B 16.11 50 2 0 Nos. 0 Inch Dia - -
65 2.5 0 Nos. 0 Inch Dia - -
80 3 0 Nos. 0 Inch Dia - -
100 4 34 Nos. 136 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 25 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL 136.00 Inch Dia - -
10 Nuts & Bolts ASTM A193 Gr.B8 BOLTS & A194 Gr.8 M14X60 0 Nos. - Nos. - -
SS Nut & Bolt machined hexagonal headed bolts, M14X65 0 Nos. - Nos. - -
Fully threaded M14X70 0 Nos. - Nos. - -
Dimention to suit with ANSI B 18.2.1 & B 18.2.2 M14X75 0 Nos. - Nos. - -
M16x85 0 Nos. - Nos. - -
M16x90 0 Nos. - Nos. - -
M20X105 0 Nos. - Nos. - -
TOTAL - Nos. - -
11 Gaskets Ring gaskets asbestos free, 3mm thk, 15 0.5 0 Nos. - Nos. - -
suitable for insertion between raised face 20 0.75 0 Nos. - Nos. - -
of ANSI B 16.5, ASA 150#, SORF flanges 25 1 0 Nos. - Nos. - -
MAKE: 32 1.25 0 Nos. - Nos. - -
1. Champion (Style No. AF-120) 40 1.5 0 Nos. - Nos. - -
2. Klinger (Style No. UNISIL-C1-18) 50 2 0 Nos. - Nos. - -
65 2.5 0 Nos. - Nos. - -
80 3 0 Nos. - Nos. - -
100 4 0 Nos. - Nos. - -
125 5 0 Nos. - Nos. - -
150 6 0 Nos. - Nos. - -
200 8 0 Nos. - Nos. - -
250 10 0 Nos. - Nos. - -
TOTAL - Nos. - -
Butterfly Valves Disc : ASTM A351 Gr CF8/CF8M SS Fully polished / A 15 0.5 0 Inch Dia - -
14 216-WCB,API-609, Nos. -
Seat material : White nitrile / EPDM (tasteless), 20 0.75 0 Nos. - Inch Dia - -
Body :CI 25 1 0 Nos. - Inch Dia - -
HANDLE : Lever Operated for size upto 150 mm 32 1.25 0 Nos. - Inch Dia - -
HANDLE : Gear Operated for size 200 mm &above 40 1.5 0 Nos. - Inch Dia - -
End Connection : Wafer Type (Sandwitched type) 50 2 0 Nos. - Inch Dia - -
Rating: 150#, ANSI B16.5, 100% Leak Test 65 2.5 0 Nos. - Inch Dia - -
PN-10 rating 80 3 0 Nos. - Inch Dia - -
Shaft: AISI 410 PTFE coated for permanent dry lubrication 100 4 0 Inch Dia - -
Nos. -
125 5 0 Nos. - Inch Dia - -
150 6 0 Nos. - Inch Dia - -
200 8 0 Nos. - Inch Dia - -
250 10 0 Nos. - Inch Dia - -
TOTAL - Inch Dia - -
16 Non Return Valve SINGLE DISC CHECK VALVE 15 0.5 0 Nos. 0 Inch Dia - -
Body :A351 Gr.CF8M Cast Stainless Steel 20 0.75 0 Nos. 0 Inch Dia - -
25 1 0 0 Inch Dia - -
Disc : A 351 Gr. CF8 and CF8M (Cast Stainless Steel) Nos.
Star :ASTM A 351 Gr. CF8 and CF8M (Cast Stainless 32 1.25 0 0 Inch Dia - -
Steel) Nos.
Spring :AISI 304 / AISI 316 40 1.5 0 Nos. 0 Inch Dia - -
Circlip :AISI 304 / AISI 316 50 2 0 Nos. 0 Inch Dia - -
Body Seat : Cladded 13% Cr / Metal to Metal / Viton / 65 2.5 0 0 Inch Dia - -
BUNA-N Soft Seat Nos.
80 3 0 Nos. 0 Inch Dia - -
100 4 0 Nos. 0 Inch Dia - -
125 5 0 Nos. 0 Inch Dia - -
150 6 0 Nos. 0 Inch Dia - -
200 8 0 Nos. 0 Inch Dia - -
250 10 0 Nos. 0 Inch Dia - -
TOTAL - Inch Dia - -
17 Y type Strainer Body, cover , plug : ASTM A351 Grade CF8M 15 0.5 0 Nos. 0 Inch Dia - -
Moc of mess : SS 304 20 0.75 0 Nos. 0 Inch Dia - -
18 Air vent Assembly With Body / cover : Brass OT 58 15 0.5 0 Nos. 0 Inch Dia - -
Valve Plug: EPDM rubber; Seals: NBR rubber 20 0.75 0 Nos. 0 Inch Dia - -
Spring : Stainless steel 25 1 0 Nos. 0 Inch Dia - -
Cap : Polyamide ; Lever Polyacetal; 32 1.25 0 Nos. 0 Inch Dia - -
Float : High density expanded polyethylene 40 1.5 0 Nos. 0 Inch Dia - -
TOTAL 0 - Inch Dia 0 0
-
19 Pressure gauge Type: SS 316 Diaphram Type 15 0.5 0 Nos. 0 Nos. - -
Body: Chemical sealed food grade Glecerine filled 20 0.75 0 Nos. 0 Nos. - -
SS case 25 1 0 Nos. 0 Nos. - -
Size: 4" 32 1.25 0 Nos. 0 Nos. - -
End Connection: 1/2" BSPP 40 1.5 0 Nos. 0 Nos. - -
(Make: Waree, H-Guru, Gen. Instru, Mass) 0 0 - -
Pressure 0-10 Bar 0 0 - -
TOTAL 0 - - -
SUITABLE WITH CONNECTING IN RS485(MODBUS)
TEMP: at 0 to 100 deg centi, Electrical conductivity: >300
0 - -
20 Flow meter μS/cm, FLOW CAPACITY: 600 M3/HR 40 1.5 Nos. - Nos.
Application range: Continuous measurement of
instantaneous and totalized flow, velocity, mass flow (at 0 - -
constant density) 80 3 Nos. - Nos.
Large back lit liquid crystal display, Supply voltage: 110 / 0 - -
220 VAC (4 wire) 150 6 Nos. - Nos.
Push buttons / Hall Effect sensors for programming, 0 - -
Flange end connection 250 10 Nos. - Nos.
TOTAL - - -
22 Check valve same as non return valve specification 25 1 0 Nos. - Inch Dia 0 - -
TOTAL - Inch Dia - -
26 Safety Valve(Pilot Piston type) Material outlet body WCB, CF8M, CF8 15 0.5 0 Nos. - Inch Dia - -
Material inlet body SS 316, Hastelloy, Monel 20 0.75 0 Nos. - Inch Dia - -
Flange acc. to DIN EN 1092-1 or ASME B16.5, Flange
25 1 0 - -
rating inlet PN 10 - PN 250/ 400 Nos. - Inch Dia
Spring loaded, Screwed lifting lever cap, Set Pressure 32 1.25 0 - -
0.49 - 250 bar Nos. - Inch Dia
TOTAL - Inch Dia - -
Grand Total - -
HOT INSULATION FOR LOW PRESSURE STEAM : Mineral Wool Section having minimum density of 144 kg/cu.m and thermal conductivity 0.022 Btu/hr ft Deg. F at mean temperature at 122 Deg. F. The
material should be confirming to IS 9842.
Rate of
Quantity Rate of Supply Supply Value Installation Value
Installation
(KG) (Rs.) (Rs.) (Rs.) (Rs.)
Total Amount
BILL OF QUANTITY FOR
MODIFICATION : M/s SARVOTHAM
CLIENT
NUETRACUETICAL R&D CARE PVT LTD.,
FACILITY
LOCATION: JEEDIPALLY,
DATE :12.10.2021
NEAR HYDERABAD
PROJECT NO: 2103 DOCUMENT:CM1-M.Q-09-01
BOQ FOR MODIFICATION
Sr. Rate Rate Value Value
DESCRIPTION OF WORK UNIT QUANTITY
No. Supply Installation Supply Installation
Sr.
No.
1 C.S. Pipes upto 6mm Thick
a. Cutting Inch dia Qro. 0.00 0.00
b. Bevelling Inch dia Qro. 0.00 0.00
c. Welding Inch dia Qro. 0.00 0.00
10 Dismantling of Pipe & Pipe Fittings Inch Dia Qro. 0.00 0.00
3 Colour coding for lines & board QRO per Inch Dia 0.00 0.00
4 Antivibration pad
3500 Kg x 4 QRO Nos. 0.00 0.00
6000 Kg x 4 QRO Nos. 0.00 0.00
4000 Kg x 4 QRO Nos. 0.00 0.00
2900 Kg x 4 QRO Nos. 0.00 0.00
2500 Kg x 4 QRO Nos. 0.00 0.00
8000 Kg x 4 QRO Nos. 0.00 0.00
1000 Kg x 4 QRO Nos. 0.00 0.00
500 Kg x 4 QRO Nos. 0.00 0.00
400 Kg x 4 QRO Nos. 0.00 0.00
300 Kg x 4 QRO Nos. 0.00 0.00
200 Kg x 4 QRO Nos. 0.00 0.00
100 Kg x 4 QRO Nos. 0.00 0.00
2 Lifting and Shifting of process and utility equipments as follows; Shifting from Ground Floor to First Floor at 4.2 m height and positioning
Total Amount
BILL OF QUANTITY OF VALVES
CLIENT : M/s SARVOTHAM CARE PVT
NUETRACUETICAL R&D FACILITY
LOCATION: JEEDIPALLY, NEAR HYDERABAD DATE :12.10.2021
PROJECT NO: 2103 DOC. NO :CM1-M.Q-12-01
Valves Steam Hot Water Chilled Water(HVAC) Chilled Water(24 TR) Compressed Air(GI) POW Supply Supply Erection Erection
Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Distributio TOTAL QTY
Tag. No. Sizes Rate Amount Rate Amount
n n n n n n n n n n n
VB1SC 15 2 8 2 12 6 12 3 7 52
VB4S 15 37 37
VB7SC 15 10 10
VB7SC 20 1 1
VB1SC 20 3 3 6
VB1SW 20 1 1
VB1SC 25 3 9 12
15 0
20 2 2
25 6 1 1 12 20
32 0
40 2 1 3
BALL VALVE
50 2 2
65 0
VB1F
80 12 1 13
100 1 1
125 0
150 0
200 0
250 0
300 0
40 1 1
VB7F 50 1 1
100 3 3
15 0
20 0
25 1 1
32 0
40 0
50 0
65 0
BALL VALVE WAFER END VB1FWEE
80 0
100 0
125 0
150 0
200 0
250 1 1
300 0
15 0
20 0
25 0
32 0
40 0
50 0
65 0
BUTTERFLY VALVE VF1F
80 1 7 8
100 8 3 11
125 0
150 10 10
200 4 4
250 2 2
300 0
15 4 4
20 0
Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Distributio TOTAL QTY
Tag. No. Sizes Rate Amount Rate Amount
n n n n n n n n n n n
25 1 1 2
32 0
40 1 1
50 1 1
65 0
CHECK VALVE VC1F
80 2 2
100 2 2
125 0
150 3 3
200 0
250 0
300 0
15 4 4
20 0
25 4 4
32 0
40 3 3
50 1 1 3 5
65 0
PISTON VALVE VP1F
80 0
100 0
125 0
150 0
200 0
250 0
300 0
15 0
BALL FLOAT VALVE VFL1F 20 0
25 1 1
15 1 63 64
20 0
25 0
32 0
40 0
50 0
65 0
NIDDLE VALVE VN4SC
80 0
100 0
125 0
150 0
200 0
250 0
300 0
15 0
20 0
25 0
32 0
40 0
50 0
65 0
BALANCING VALVE VBL1F
80 2 2 4
100 0
125 0
150 6 6
200 1 1
250 0
300 0
25 1 1
PRESSURE REGULATING VALVE PRV1F
0
Valves Steam Hot Water Chilled Water(HVAC) Chilled Water(24 TR) Compressed Air(GI) POW Supply Supply Erection Erection
Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Distributio TOTAL QTY
Tag. No. Sizes Rate Amount Rate Amount
n n n n n n n n n n n
50 1 1
PRESSURE SAFETY VALVE SRV1F 25X15 1 1
50X40 1 1
15 0
20 0
25 2 2
32 0
40 2 2
50 0
65 0
Y TYPE STRAINER STY1F
80 0
100 0
125 0
150 0
200 0
250 0
300 0
15 0
20 0
25 1 1
32 0
40 0
50 0
65 0
BASKET TYPE STRAINER BST1F
80 0
100 2 2
125 0
150 0
200 0
250 0
300 0
15X25 1 1
40X25 2 1 3
50X80 2 2
CONCENTRIC REDUCER CON.RED.
50X100 2 2
65X40 1 1
100X80 1 1 2
25X15 1 1
25X50 1 1
ECCENTRIC REDUCER EC.RED. 40X65 1 1
80X50 2 2
100X50 2 2
Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Generatio Distributio Distributio TOTAL QTY
Tag. No. Sizes Rate Amount Rate Amount
n n n n n n n n n n n
VD-DIAPHRAGM VALVE
BST-STRAINER BASKET TYPE
STY-STRAINER Y-TYPE
SG - SIGHT GLASS
Bill Of Quantity Of Process Drain HDPE Piping
Supply Supply
Sr.No Specifications for Pipes/Pipe fittings & Accessories Size (NB) Size (Inch) Qty Unit
Rate Amount
HDPE pipe as per IS 4984 for water supply and IS 14993 for
Pipes (in Mtrs) 15 0.5 0 Meter -
sewrage application. (Single pressure butt fusion)
1
20 0.75 0 Meter -
25 1 0 Meter -
32 1.25 0 Meter -
40 1.5 0 Meter -
50 2 0 Meter -
65 2.5 0 Meter -
80 3 0 Meter -
100 4 0 Meter -
125 5 0 Meter -
150 6 0 Meter -
200 8 0 Meter -
250 10 0 Meter -
TOTAL -
-
HDPE pipe as per IS 4984 for water supply and IS 14993 for
Flanges 15 0.5 0 -
2 sewrage application. (Single pressure butt fusion) Nos.
With gaskets,nuts, bolts and washer 20 0.75 0 Nos. -
25 1 0 Nos. -
32 1.25 0 Nos. -
40 1.5 0 Nos. -
50 2 0 Nos. -
65 2.5 0 Nos. -
80 3 0 Nos. -
100 4 0 Nos. -
125 5 0 Nos. -
150 6 0 Nos. -
200 8 0 Nos. -
250 10 0 Nos. -
TOTAL -
-
HDPE pipe as per IS 4984 for water supply and IS 14993 for
Flanges blind 15 0.5 0 -
3 sewrage application. (Single pressure butt fusion) Nos.
20 0.75 0 Nos. -
25 1 0 Nos. -
32 1.25 0 Nos. -
40 1.5 0 Nos. -
50 2 0 Nos. -
65 2.5 0 Nos. -
80 3 0 Nos. -
100 4 0 Nos. -
125 5 0 Nos. -
150 6 0 Nos. -
200 8 0 Nos. -
250 10 0 Nos. -
TOTAL -
HDPE pipe as per IS 4984 for water supply and IS 14993 for
Elbows 90º 15 0.5 0 -
4 sewrage application. (Single pressure butt fusion) Nos.
Long radius 20 0.75 0 Nos. -
(R-1.5D) 25 1 0 Nos. -
32 1.25 0 Nos. -
40 1.5 0 Nos. -
50 2 0 Nos. -
65 2.5 0 Nos. -
80 3 0 Nos. -
100 4 0 Nos. -
125 5 0 Nos. -
150 6 0 Nos. -
200 8 0 Nos. -
250 10 0 Nos. -
TOTAL -
HDPE pipe as per IS 4984 for water supply and IS 14993 for
Equal Tee 15 0.5 0 -
5 sewrage application. (Single pressure butt fusion) Nos.
20 0.75 0 Nos. -
25 1 0 Nos. -
32 1.25 0 Nos. -
40 1.5 0 Nos. -
50 2 0 Nos. -
65 2.5 0 Nos. -
80 3 0 Nos. -
100 4 0 Nos. -
125 5 0 Nos. -
150 6 0 Nos. -
200 8 0 Nos. -
250 10 0 Nos. -
TOTAL -
Grand Total -
Cost Summary
Piping - Fab & Erec Err:509
Structure - Fab & Erec 0
Valve Erec Err:509
Anchor Fastener 0
Summary Loading / Unloading 0
Puf Erection 0
Painting 0
Manpower Supply 0
Miscellaneous Err:509
Total Err:509
Notes:
Sr.No. Description
1 Supply of following material is included in final price & shall be in the contractor’s scope of supply.
Fabrication and Erection of MS/CS pipe and fitting complete along with all accessories Such as Elbow, Bends, Flanges and angle
2 supporting work etc of all sizes complete as per specification, drawings and requirements. (Required all consumables - such as Bolts,
Nuts, Washers, Gasket and required Clamp will be supplied and erected by Vendor.
Fabrication and Erection of SS pipe and fitting complete along with all accessories Such as Elbow, Bends, Flanges and angle supporting
3 work etc of all sizes complete as per specification, drawings and requirements. (Required all consumables - such as Bolts, Nuts, Washers,
Gasket and required Clamp will be supplied and erected by Vendor.
All the required tools/tackles/ To & Fro charges/Loaging & Boarding/Transportion/Freight & insurance upto site will be in the scope of
4
vendor.
5 Necessary testing equipment / instruments.
6 Any chemicals required for cleaning of weld joints and SS piping.
7 Shims, wedges and packing plates.
9 Necessary materials and arrangement required for applicable tests such as radiography, dye penetrate, etc. as needed.
10 Required consumables such as oxygen, acetylene, inert gases, electrodes, filler wire, flux, etc. are included in vendor's scope.
11 Required protecting materials required for protecting equipment supplied by the owner.
14 Oil, graphite, Moly - Kote grease, and cleaning agents for cleaning will be in vendor scope
All Intermediate & General areas GI Nuts & Bolts and Asbestos free gaskets,Teflon Tapes and/ or any other MOC as specified in piping
15
specifications for piping erection work are in contractor’s scope.
16 All SS Nuts & Bolts and PTFE Envelop gaskets required for piping work. In Clean room areas are in contractor’s scope.
All steam lines in premises HT nut bolts with washers & high temp suitable gaskets as specified in piping specification for piping erection
17
work in contractor’s scope.
Any other material though not specified but required for completion of work as per specification and instructions should be arrange by
18
Contractors
19 Safety equipment likes safety goggles, shoes, gloves, belts, head-gears etc. to be arrange by Contractors.
20 Hack saw blade for manual cutting.
21 All misc. Consumable items related to support work are in contractor’s scope
The approved makes for welding rods / SS Filler Wires shall be as follows,
• M/s Advani Orlikon
22
• M/s ESAB
• M/s D & H
Contractor shall engage welders having "welder qualification" certificate from reputed consultants. Certificate shall not be older than 2
24
years. For welding of steam line under IBR, welder must pusses IBR approved certificate.
25 No overtime charges to be considered by TPL.
The Contractor shall make their own arrangement for unloading & loading and internal shifting of Owner's free issue materials (Such as
26
Pipes, Valves, Structures, Fittings etc.) brought at site and such arrangement shall be at contractor's cost and expense.
All cabling, equipment, installations etc. shall comply in all respects with the latest statutory requirements and safety provisions i.e. as per
and the Central/ State Electricity Acts and Rules etc. The Contractor will ensure that his equipment and Electrical wiring etc., are installed,
27
modified maintained by a licensed Electrician/Supervisor. A test certificate is to be produced to the Project Manager/Owner’s consultant for
his approval, before power connection is made available.
Vendor has supposed to make and supply of as built drawing, P & ID and isometric layout in AutoCad format. Also three set of hard copy
28
drawings of each pipe lines to be arrange by Vendor to TPL
Cost Summary
1 Thermal Insulation for Chilled water 0
2 Thermal Insulation for Hot water 0
3 Thermal Insulation for Steam line 0
Total 0
Notes:
Sr.No. Description
Insulation material should be as per specification as described under and the material supply and installation will be in Vendor scope.
Chilled water pipe: Insulation Material should be PIR (Polyisocyanurate) / PUR (Polyurethane), Cladding Material :
1
Aluminium, Chilled water temp. considering at 5 Deg C.
Hot water / Condensate drain pipe: Insulation Material should be LRB mattress (Light Resin Bonded), with SS wire metting
2
(mesh) on both side, Cladding Material : Aluminium, Hot water temp. considering at 90 Deg C.
Steam pipe line : Insulation Material should be LRB mattress (Light Resin Bonded), with SS wire metting (mesh) on both
3
side, Cladding Material : Aluminium, Hot water temp. considering at 135 Deg C.