Professional Documents
Culture Documents
Ezi Fence Calculator
Ezi Fence Calculator
DISCLAIMER
Instructions
Draw out your fence plan and identify how many different straight fence runs you have as you will
For each straight fence run enter the length of the run, in inches, into the fence run details table.
If the run has a gate in it select "Yes", otherwise select "No".
If the gate is at one end of the fence run select "Yes" if the gate is partway along the run select "No
From your plan determine the number of intersections and enter the details into the table.
Review the dimension check table.
If the table indicates that no cutting is required then the length of that run can be produced with th
If the table indicates that cutting is required then the length of that run is such that you will need to
If the table indicates that the run is over length, the length of the run is up to 5 inches longer than
calculator has included one panel for this additional length so by changing your design you may be
If the table indicates that the run is under length, the length of the run is up to 5 inches shorter tha
be able to change your design to eliminate cutting.
Important notes
Minimum length for a fence run is 20 inches.
Maximum length for a fence run is 742 inches (calculator will not work for fences above this length
this).
Minimum width for a gate is 20 inches.
This model does not take into account using excess material from one run in another run.
This model assumes you will use Ezi-Fence posts in the fence, it does not make allowances for the u
This model will not work if you have more than one gate in any run.
This model assumes you will be installing the fence onto an existing structure so it includes basepla
be going into ground.
STRATCO EZI-FENCE C
Examples
Panel
Panel 2 runs
1 intersection
Select "No" for gate in all runs
Panel
3 runs
Panel 2 intersections
Select "No" for gate in all runs
Panel
Intersection - Two fence runs meeting at 90 degrees with a post at the point of intersectio
EZI-FENCE CALCULATOR
Panel Gate
3 runs
Panel 2 intersections
Select "Yes" for gate in run 1
Panel Select "Yes' for gate at one end in run 1
Select "No" for gate in runs 2 and 3
point of intersection
STRATCO EZI-FENCE CALCULATOR
Step 1 - enter fence run details Step 2 - review and modify design if necessary
FENCE RUN DETAILS DIMENSION CHECK
Length (inches) Gate Gate and one end Cutting Required Tolerance
Run 1 No No Run 1
Run 2 No No Run 2
Run 3 No No Run 3
Run 4 No No Run 4
Run 5 No No Run 5
Run 6 No No Run 6
Run 7 No No Run 7
Run 8 No No Run 8
Run 9 No No Run 9
Intersections
Step 4 - make note of the goods required and click the color you would like to place the order for