Professional Documents
Culture Documents
Date 02.04.2022 03.04.2022 08.04.2022 10.04.2022 14.04.2022 20.04.2022 23.04.2022 24.04.2022 30.04.2022
Time
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
X4
X5
X6
Xbar 0.03 0.04 0.07 0.06 0.06 0.06 0.07 0.04 0.05
R 0.02 0.04 0.04 0.03 0.04 0.03 0.06 0.04 0.06
Xbar Chart
0.2
0.15
0.1
0.05
-0.05
-0.1
-0.15
-0.2
R Chart
0.12
0.1
0.08
0.06
0.04
0.02
Engineering Target:
(Used only if spec is two-sided)
T= 15.00 * Lower Available Tolerance:
LAT = Xbar - LSL
LAT = 0.2518
Upper Process
Specification type Type -- §
and skewness
Capability Index CpU = 2.09
Skew n/a CpU = 2 x UAT / NV
Standard deviation:
(Required if data are not time-ordered,
or if process is not in statistial control.)
s= * Enter "P" for Performance
Indices (Pp& Ppk)
Performance indices require
a standard deviation (s) entry.
Appropriate d2 for
the sample of size n: d2 = 1.693 NOTES:
† Use MRbar if IX-MR control chart was used.
Natural Variation of the process ‡ Use Xdouble bar if Xbar & R control chart was used.
NV = 6 x Rbar / d2
NV = 0.142 * User supplied data.
« Applies only when target is not centered in spec.
Potential § Target is not bracketed by LSL and USL. Be sure LSL < T <
Process Capability Cp = -- USL.
Cp = ET / NV
Table of d2 values:
n d2 Engineering Tolerance (ET) & Process Variation (NT) n
2 1.128
3 1.693
Proc. Var,
4 2.059 NV
5 2.326
6 2.534 Spec, ET Tgt
2.534
7 2.704
8 2.847 2.847
2.847
9 2.970 -2 0 2 4 6 8 10 12 14 16
10 3.078 3.078
3.078
3.078
3.078
3.078