Professional Documents
Culture Documents
PIPESIM 2022
Version 2022.1
Release notes
PIPESIM 2022.1 Release notes Page i
Security Notice
The software described herein is configured to operate with at least the minimum specifications set
out by Schlumberger. You are advised that such minimum specifications are merely
recommendations and not intended to be limiting to configurations that may be used to operate the
software. Similarly, you are advised that the software should be operated in a secure environment
whether such software is operated across a network, on a single system and/or on a plurality of
systems. It is up to you to configure and maintain your networks and/or system(s) in a secure
manner. If you have further questions as to recommendations regarding recommended
specifications or security, please feel free to contact your local Schlumberger representative.
Table of contents
INTRODUCTION .............................................................................................................................. 1
ENHANCEMENTS IN PIPESIM 2022.1 .............................................................................................. 2
New PVT fluid package: Symmetry ....................................................................................................................... 2
Support for ESP Permanent Magnet Motor .......................................................................................................... 2
Expose ESP motor performance parameters ....................................................................................................... 2
Gas lift diagnostics plot added to P/T and NODAL Analysis tasks ................................................................... 3
Upgrade to Python 3.9 and support additional variables under Python Toolkit .............................................. 3
Internal file format upgrade ..................................................................................................................................... 3
FIXED ISSUES AND MINOR ENHANCEMENTS IN PIPESIM 2022.1 ........................................................ 4
SUMMARY OF FUNCTIONALITY AVAILABLE ON DIFFERENT PLATFORMS ................................................ 5
RELEASE HISTORY ......................................................................................................................... 6
PIPESIM 2021.1 (Nov 2021) ................................................................................................................................... 6
PIPESIM 2020.1 (Dec 2020) ................................................................................................................................... 6
PIPESIM 2019.5 (Jul 2020) ..................................................................................................................................... 6
PIPESIM 2019.4 (Jun 2020) ................................................................................................................................... 7
PIPESIM 2019.3 (Dec 2019) ................................................................................................................................... 7
PIPESIM 2019.2 (Nov 2019) ................................................................................................................................... 7
Introduction
The PIPESIM* steady-state multiphase flow simulator is Schlumberger’s flagship well and network
modeling software for steady-state multiphase flow simulation. Together with the OLGA* dynamic
multiphase flow simulator, Schlumberger provides a complete software solution for design and
optimization of production systems.
These notes accompany the release of PIPESIM 2022.1 from Schlumberger. The notes describe
changes in PIPESIM 2022.1 relative to PIPESIM 2021.1. This document should be read by all
users of the program. The complete program documentation consists of the PIPESIM Help, the
release notes, and the installation guides.
The Schlumberger Software Support Hub provides useful information about the product, and a
knowledge base.
Please contact Schlumberger if problems or missing functionality are encountered when using
PIPESIM or any of the related tools included in the PIPESIM software package.
.
With Symmetry, you can define composition components by using the standard components list or
add user-defined components by defining the fluid basic properties, such as molecular weight,
boiling point and so on.
In addition, like the other existing fluid packages in PIPESIM, you can interactively perform flash
calculation under certain pressure and temperature conditions.
The Symmetry PVT package is a powerful fluid engine that offers, in addition to the basic fluid
characterization capabilities, the ability to model solid formation risks of hydrate, wax, and
asphaltene. It also offers the ability to display a solid CO2 line on the phase diagram.
In PIPESIM 2022.1, you can model the installation of Permanent Magnet Motor (PMM) in ESP
systems.
The overall ESP system, including operating speed, power, head, and efficiency is adjusted based
on the number of poles in the PMM, which allows for high operating frequencies more than 420 hz.
When you enable the Surface power correction under the ESP Calculation options tab and add
a motor and a cable to the model, various motor variables are exposed as part of the ESP node
and profile results. This includes motor load, efficiency, current, voltage, power factor, and cable
voltage drop.
Gas lift diagnostics plot added to P/T and NODAL Analysis tasks
If you model a well with a gas lift injection valve system and enable multi-pointing option, the gas lift
diagnostics plot is now added to the P/T and NODA Analysis tasks. Previously, this plot was only
available under the gas lift diagnostics task.
• You now cannot select water as production stream for a 2-phase separator.
• Performance is now improved when opening the well editor for compositional fluid.
• Permeability effect when injecting water in the gas reservoir has been fixed.
• You can now perform ESP design for a well with 10 or more completions.
• An issue related to GIS that causes the model UI to freeze has been fixed.
• A validation error has been added to handle junctions with long character names with more
than 120 characters.
• An issue related to the Heat transfer value when importing a well model into a network has
been fixed.
• Errors in the PIPESIM Help have been corrected for the Standing z factor correlation, and a
statement has been added indicating if the deviation from vertical is equal to or higher than
75 degrees, then the skin factor is 0.
Note: User Access Control (UAC) Limitations – PIPESIM runs with the lowest available permission.
The Windows 10 restrictions UAC applies to PIPESIM. For example, when UAC is activated, it
prevents programs from writing to the Programs folder. If you cannot write to the Programs folder,
do one of the following:
o Before running case studies, copy the files to a writeable folder, such as the Documents
folder.
o Run PIPESIM as an administrator.
Release history
Enhancements and changes to PIPESIM (besides various bug fixes) and documentation
enhancements and improvements are summarized below. More details are available in the release
notes included with the PIPESIM installation kit or through the Schlumberger Software Support
Hub.
• VPC for gas lift calculations in P/T profile, System analysis, and Gas lift diagnostics
• tasks
• Gas lift multi-pointing in System analysis task
• Erosion and corrosion risks indication
• Add ESP motors to catalog
• ESP actual performance and variable speed curves displayed for P/T profile and Nodal
analysis tasks
• PIPESIM Python Toolkit updates