Professional Documents
Culture Documents
Pages
Sl. No. Particulars
From To
Note : Only one weightage is applicable for a particular work. If two weightages are applicable whichever is severe is
to be considered, depending on the gravity of the situation.
MATERIAL COMPONENTS
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
1. ADHESIVES
1 0009 Adhesive (for linoling flooring) Kgs 174.00
2 0509 Adhesive for tiles Kgs 21.00
3 0514 Adhesive for joints Kgs 59.00
4 0022 Bees Wax Kgs 140.00
5 0513 High bond tile adhesive for vitrified tiles Kgs 17.00
6 2008 Fevicol Kgs 161.00
7 2047 Ball Adhesives Kgs 195.00
8 0387 Shellac Kgs 200.00
2. AGGREGATE
2a. BRICK AGGREGATE/BRIcks/blocks
9 0054 Brick bats 25 to 100 mm Cum 475.00
10 0055 Brick aggregate 20 mm (Nominal) Cum 490.00
11 0056 Brick aggregate 25 mm (Nominal) Cum 490.00
Burnt brick class designation 35 (non modular) Ground moulded)100
12 0064 500
Nos.
13 0503 Burnt brick class designation 35 (modular) 100 Nos. 550.00
14 0488 Table moulded class designation 50(modular) Each 600.00
15 0504 Table moulded class designation 50(modular) 100 Nos. 680.00
16 0505 Wire cut bricks of class designation 75 (non modular) 100 Nos. 1200.00
17 0506 Wire cut bricks of class designation 75 (modular) 100 Nos. 1000.00
18 0311 Pre-cast hollow blocks (40x20x20cms) grade 30 100 Nos. 3570.00
19 0391 Solid blocks (concrete 40x20x20cms) 100 Nos. 4220.00
20 0501 Pre-cast hollow blocks (40x10x20cms) 100 Nos. 2580.00
21 0502 Pre-cast solid blocks (40x10x20cms) 100 Nos. 2948.00
22 0497 Hollow concrete blocks (40x20x20cms) Grade 40 100 Nos. 4500.00
23 0498 Hollow concrete blocks (40x20x15cms) 100 Nos. 3800.00
24 0499 Hollow concrete blocks (40x20x10cms) 100 Nos. 1900.00
25 2109 Pre-cast clay hollow bricks 40cm x 20cm x 20cm Each 44.00
26 2110 Pre-cast clay hollow bricks 40cm x 20cm x 15cm Each 32.00
27 2111 Pre-cast clay hollow bricks 40cm x 10cm x 20cm Each 26.00
2b. STONE AGGREGATE
28 0175 100 mm and down nominal size Cum 600.00
29 0734 53 mm nominal size Cum 780.00
30 0750 40 mm nominal size Cum 840.00
31 0060 30 mm nominal size Cum 950.00
32 0800 25 mm nominal size Cum 950.00
33 0749 20 mm nominal size Cum 1190.00
34 0058 12.5 mm nominal size Cum 980.00
35 0057 10 mm nominal size Cum 980.00
36 0707 6 mm nominal size Cum 700.00
37 0803 Fine aggregate 2.36 mm nominal size Cum 600.00
38 0762 Key aggregates 22.4 to 2.8 mm Cum 870.00
39 0746 Filter media stone aggregates Cum 470.00
40 0904 Coarse aggregates 53 mm cum 780.00
41 0906 Crushed aggregates 37.5mrn cum 700.00
42 0912 Crushed coarse aggregate (Supply of hand broken aggregates) cum 550.00
43 0919 Key aggregates passing 26.5mm to 2.8mm cum 900.00
44 0921 Crushed stone aggregate 13.2mm to 10mm cum 800.00
45 0922 Crushed stone chipping, 19mm cum 850.00
46 0926 Crushed aggregate 9.5mm to 4.75mm cum 450.00
47 567 Filler Aggregates Tonne 1000.00
2c. STONE CHIPPINGS
48 0732 Crushed sone chippings 11.2 mm Cum 850.00
49 0733 Crushed sone chippings 13.2 mm Cum 850.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
50 0400 Stone dust Cum 325.00
51 0815 Crushed stone chipping 5.6 mm size cum 570.00
52 0819 Lime stone dust Tonne 5700.00
2d. SAND/GRAVEL
53 0287 Pea size gravel / 6mm and down stone grit cum 270.00
54 0334 Sand/ Artificial Sand/ Manufactured Sand cum 1300.00
55 0551 Shahabad metal 40 mm and down cum 45.00
56 0731 Sand cum 1300.00
57 0751 Granular material cum 120.00
58 0752 Gravel 2.36 mm cum 120.00
59 0772 Natural sand 5.6 to 75 micron cum 1300.00
60 0781 Quartz sand Kgs 385.00
3. stones
61 0037 Bond stones 20cms x 20cms x 45cms Each 20.00
62 0039 Boulders cum 500.00
63 0066 Burnt stone slabs 10cms thick Sqm 280.00
64 0174 Granite stone slabs fine dressed 40mm thick Sqm 1400.00
65 0330 Rubble stones cum 250.00
66 0390 Size stone 20x20x25 cm Each 10.00
67 0401 stone slab 10 to 12 cm thick Sqm 425.00
68 0720 Bond stone 20x20x45cm Each 20.00
69 0780 Quarry spalls cum 220.00
70 0789 Size stone 20x20x25 cms Each 10.00
71 0790 Spall (jelly used for packing) cum 63.00
72 0793 Stone at quarry cum 250.00
73 0794 stone boulders cum 500.00
74 0795 Stone spalls cum 130.00
75 0939 Stone with minimum size of 200mm cum 560.00
4. ALLUMINIUM
76 0010 Aluminium beading Kgs 132.00
77 0011 Aluminium handles Each 58.00
78 0012 Aluminium hinges 75 mm length Each 38.00
79 0013 Alumimium stays Each 39.00
80 0014 Aluminium tower bolt Each 75.00
81 0017 Aluminium sheet for strips Sqm 280.00
82 0018 Aluminium window frame Section 1.2 mm thick Kgs 172.00
83 0522 Aluminium Composite panel of approved colour straight portion Sqm 3200.00
84 0533 Aluminium frame section Kgs 8.13
85 0544 Aluminium Composite panel of curved portion Sqm 3600.00
86 0860 Aluminium studs 100 x 100mm fitted with lense reflectors Nos. 230.00
87 0942 Aluminium sheeting fixed with encapsulated lens type reflective
sheeting of size 0.9sqm Sqm 3775.00
88 0943 Aluminium alloy/galvanised steel/Galvanised MS plate
including 5% wastage Tonne 52900.00
89 0944 Aluminium alloy plate, 2mm thick, fixed with high intensity grade
sheeting vide Clause 801.3 Sqm 3775.00
90
91 2069 Alluminium anodised profile top cap beading m 345.00
5. ASBESTOS CEMENT PRODUCTS EXCEPT PIPES
92 0007 AC sheet 6 mm thick semi corrugated Sqm 165.00
93 0008 AC sheet 6 mm thick semi trafford Sqm 190.00
94 0327 Ridges (AC sheet) Pair 201.00
6. BITUMEN
95 0717 Bitumen 80/100 Grad Bulk Tonne 49038.00
96 835 Bitumen 80/100 Packed Tonne 53075.00
97 0814 Bitumen 60/70 Grade Bulk Tonne 50048.00
98 836 Bitumen 60/70 Packed Tonne 54084.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
99 0030 Bitumen 85/25 Grade Tonne 49035.00
100 0820 Bitumen 30/40 Grade Tonne 49035.00
101 0730 CRMB Tonne 49101.00
102 0806 NRMB70 Tonne 78807.00
103 0735 Cut back MC 70 Tonne 75806.00
104 0718 Bitumen emulsion Tonne 49515.00
105 0031 Bitumen felt ( Hersian based) Sqm 80.00
106 0032 Bitumen washer Each 1.00
107 0109 Coal tar Sqm 15.00
108 0108 Coal tar paint L 25,00
109 0035 Blown or residual bitumen Tonne 49035.00
110 0807 Polymer MB 70 Tonne 78807.00
7. BLASTING MATERIAL
111 0736 Detonator Each 6.00
112 0738 Drill bits Nos 350.00
113 0786 Safety fuse wire Coil 180.00
114 0791 Gelatin Kg 100.00
8. BOARDS
115 0002 12 mm thick pre laminated board (Novapan) exterior grade Sqm 582.00
116 0312 Prelaminated board 19 mm thick of approved laminationon
both side Sqm 672.00
117 0313 Prelaminated board of approved lamination on one side
and blanacing white colour Sqm 582.00
118 0301 a. Plywood 12 mm thick (Commercial) Sqm 875.00
b. Plywood 19 mm thick (Commercial) Sqm 1000.00
c. Plywood 25 mm thick (Commercial) Sqm 1900.00
d. Plywood 6 mm thick (Commercial) Sqm 600.00
119 0293 Plain particle board Sqm 450.00
120 0180 Hard board 45 x 45 mm size Sqm 120.00
121 0181 Hard board 600 x 450 mm size Sqm 138.00
122
123 0955 Pre-moulded asphalt filler board Sqm 600.00
124 2006 12mm plywood Sqm 720.00
125 2007 4mm thick veneer Sqm 1080.00
126 2009 19mm Plyboards Sqm 1050.00
127 2010 1.5mm Laminate Sqm 780.00
128 2090 5mm PVC sheet Sqm 745.20
129 2099 5mm BS prelam PVC sheet Sqm 1004.00
130 2100 5mm SS prelam PVC sheet Sqm 873.00
131 2101 2mm PVC sheet Sqm 345.00
9. CEMENT
132 0084 Cement Qtl. 680.00
133 0439 White cement Qtl. 1800.00
134 1557 Portland Slag Cement(PSC)/Portland Pozzolona Cement(PPC) Qtl 680.00
135 1558 Groun Granulated Blast Furnace Slag (GGBS) Qtl. 340.00
10. flooring materials
136 0088 Chequered mosaic tiles grey Sqm 250.00
137 0089 Chequered mosaic tiles light shade Sqm 300.00
138 0090 Chequered mosaic tiles medium shade Sqm 275.00
139 0091 Chequered mosaic tiles white colour Sqm 350.00
140 0110 Cobble stone 60 mm thick Sqm 400.00
141 0111 Cobble stone 75 mm thick Sqm 458.00
142 0116 Cuddapah slab 2.5 cm to 4 cm thick Sqm 286.00
143 0176 Grey colour mosaic tiles Sqm 225.00
144 0213 Light shade mosaic tiles Sqm 225.00
145 0228 Machine cut granite stone slab 40 mm Sqm 750.00
146 0229 Machine polished granite stone slab 20 mm Sqm 525.00
147 0231 Marble chips Kgs 20.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
148 0234 Marble dust Cum 858.00
149 0235 Marble powder Cum 725.00
150 0237 Marble slab 20 mm thick Sqm 1200.00
151 0248 Metallic floor hardner Kgs 550.00
152 0386 Shahabad Slabs 2.5 cm to 4 cm thick Sqm 343.00
153 0448 White mosaic tiles Sqm 175.00
154 0507 Vitrified tiles 10 mm thick 600x600 mm granite finish Sqm 612.00
155 0508 Vitrified tiles 600x600 mm 10 mm thick Sqm 544.00
156 0545 20 mm thick Hassan Green granite Sqm 1500.00
157 0546 Ceramic tiles 30x30 cms Sqm 435.00
158 0510 Grout for vetrified tiles Kgs 91.00
159 0511 Spacers for Vetrified tiles No. 1.50
160 0512 Sealer for Vetrified tiles Sqm 1.70
161 0515 Prepolished Grey granite 20 mm thick Sqm 1030.00
162 0517 20mm thick Ruby red granite Sqm 1717.00
163 0518 20mm thick grey granite Sqm 973.00
164 0519 20mm thick Shiva gold granite Sqm 1946.00
165 0520 20mm thick Black granite Sqm 1300.00
166 0521 Propolished black granite 20mm thick Sqm 1400.00
167 0523 Prepolished Water cut grey granite Sqm 1030.00
168 0725 Chequered cement concrete tiles Sqm 207.00
169 0416 Tandur blue slabs 2.5cms to 4cms thick Sqm 286.00
170 0545 20mm thick Hassan green granite Sqm 1500.00
171 2076 Lakared granite Sqm 3300.00
172 2085 Sadarahalli flammed granite 40mm Sqm 1100.00
173 2086 Sadarahalli pre polished granite 20mm Sqm 950.00
174 2108 Black granite 40mm thick Sqm 2100.00
11. tiles
175 0112 Colour glazed tiles 15 x 15 cms 10mm thick Each 7.00
176 0113 White glazed tiles 15 x 15 cms 6mm thick Each 5.50
177 0186 Hersian cloth for using in tiles as reinforcement Sqm 40.00
178 0217 Linolium sheet fir tile 30 cmsx30cms Sqm 250.00
179 0464 Yelahanka tiles of size 250x250 mm Each 4.00
180 0481 Mangalore tiles first class and special tile for ridges and hips Nos 13.00
181 0485 Medium shade mosaic tiles Sqm 100.00
182 0486 Ceramic tiles 15 cms x 15 cms Sqm 250.00
183 0444 White glazed tiles 15 cms x 15 cm, 10 mm thick plain Each 6.50
184 0445 Color glazed tiles 15 cm x 15 cm, 10 mm thick anti skid Each 6.70
185 578 Pre polished grey granite tile 10mm Sqm 450.00
186 579 Pre polished black granite tile 10mm Sqm 650.00
187 2073 Concrete designers tiles Sqm 485.00
188 2074 Ceramic tiles of 300 x 600mm Sqm 450.00
189 2075 Ceramic tiles of 300 x 450mm Sqm 350.00
190 2042 Border tiles 30 x 10 cms Each 125.00
191 2043 Glazed tiles 300 x 450 Sqm 50.00
192 2026 Ceramic tiles 400 x 400 mm Sqm 400.00
12. RMC
193 0495 Ready Mix Concrete M 20 (1:1.5:3) cum 4750.00
194 0496 Ready Mix Concrete M 25 (1:1:2) cum 4800.00
195 2200 Ready Mix Concrete M 30 Cum 5000.00
196 2201 Ready Mix Concrete M 35 Cum 5200.00
197 2202 Ready Mix Concrete M 40 Cum 5400.00
13. steel
198 0003 18 gauge 75 mm MS laths of 2.8 m length Nos 200.00
199 0004 Z section Kgs 52.00
200 0019 Angle iron 40x40x6mm Kgs 52.00
201 0087 Channels 25x25x6 mm Kgs 52.00
202 0187 High tension coil oxidised MS Each 650.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
203 0203 Hooks oxidised MS 150 mm Each 15.50
204 0221 M.S. flat 30 cmx25mmx3mm Kgs 52.00
205 0223 M.S. Round Bright bars 20mm q 5581.00
206 0224 M.S. Square Bright bars 20mm q 5581.00
207 0249 Mild steel 6 mm dia Kgs 52.00
208 0250 Mild steel bars q 4100.00
209 0252 MS Channels Kgs 52.00
210 0255 MS flats 20 mm x 6 mm Kgs 52.00
211 0257 MS plates Kgs 58.00
212 0258 MS rods Kgs 52.00
213 0259 MS Sheet 1 mm thick Kgs 58.00
214 0260 MS Sheet 20 gauge Kgs 58.00
215 0262 MS tees Kgs 52.00
216 0264 Mullion section (MS) Kgs 53.00
217 0288 Pig lead Kgs 50.00
218 0414 T section Kgs 53.00
219 0484 M.S. Shoes Kgs 53.00
220 0547 Expanded metal 12.5 mm to 25 mm 14 G Sqm 280.00
221 0714 Bearing plates Tonne 60500.00
222 0716 Binding wire Kgs 53.00
223 0723 Cast Steel Kgs 57.00
224 0724 Cast steel rocker assembly Kgs 83.00
225 0739 Edge beams of steel of special shape and section Kgs 58.00
226 0748 Forges Steel (2 rollers) Kgs 230.00
227 0756 High Tensile steel wires/strands Tonne 49500.00
228 0757 High Tensile strands q 4950.00
229 0758 Thermo Mechanically Treated bars (TMT bars) Tonne 48000.00
230 0759 ISMC 1002.806x1.05 Tonne 58000.00
231 0763 Mild steel q 5200.00
232 0764 Mild Steel anchors Kgs 52.00
233 0765 Mild steel matrix including wastage Kgs 52.00
234 0766 Mild Steel plate (Galvanised) Tonne 57200.00
235 0767 MS bars Tonne 57200.00
236 0770 MS flats Tonne 57200.00
237 0771 MS gratings 260 mm x 260 mm Each 89.00
238 0777 Pile shoes - CI Kgs 89.00
239 0778 Pile shoes - MS Kgs 58.00
240 0792 Stainless steel 304 grade Kgs 288.00
241 0862 Mild Steel pipe 100mm dia m 264.00
242 0863 Mild steel pipe 25mm dia 2.5mm thick m 90.00
243 0864 CGI sheets Kgs 40.00
244 0865 Angle iron 45 x 45 x 5mm Kgs 53.00
245 0866 MS sheet 300mm wide, 2.5mm long & 2.6mm thick Kgs 53.00
246 0867 Angle iron 50 x 50 x 2mm long, 2 Nos. Kgs 53.00
247 0868 MS sheet of 12 SWG, 3 nos, of 200mm width & 4m length Kgs 58.00
248 0870 Steel drum 300mm dia 1.2m high/empty Nos. 111.00
249 0940 Mild steel angle iron 75 x 75 x 6mm Nos. 55.00
250 0941 Mild steel angle iron 75 x 75 x 6mm, 2.85 metres long Kgs. 52.00
251 0957 Corrugated steel, 3mm thicken "W" beam section railing, Kgs 55.00
4.5m in length.
252 0958 Channel post 150 x 75 x 5mm, 1.8m long, 3 Nos. at Kgs 55.00
16.4 kg per mtr.
253 0959 Spacer 150 x 75 x 5 mm channel 0.33, long, 3 Nos. at Kgs. 55.00
16.4 kg per m.
254 0963 Structural steel in plates, angles, Galvanised structural steel Tonne 53815.00
plate etc., including 5% wastage
255 0972 RS Joist 100 x 75 mm - 16.5m at 11.5 kg/mtr Kgs. 52.00
256 0973 Struts - 2 Nos. for terminal posts, 2m long each 2 x 2 x 11.50 Kgs. 52.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
257 0974 Tile 2 Nos. of 8mm steel plate, 1.5sqm each for terminal posts Kgs. 52.00
at 62.80kg/sqm (2x1.5)
258 0975 Steel wire rope 40mm Kgs. 52.00
259 0976 Mild steel pipe 25mm dia, 2.5mm thick m 89.00
260 0977 MS sheet for 600 x 300 x 3mm rectangular vane, one number Kgs. 56.00
at 24 kg/sqm
261 0978 MS sheet for 250mm dia circular vane 3mm thick, 4 numbers Kgs. 56.00
at 24kg/sqm
262 0979 MS sheet 3mm thick at 24kg/sqm Kgs. 58.00
263 0981 Galvanised angle sections 100mm x 10mm of 12mm thickness Kgs. 53.00
weldable structural steel as per IS : 2062.2 Nos. of 12m
length each at 17.7 kg/m
264 0988 Helical pipes 600mm diametre m 166.00
265 0989 Tie rods 20mm diametre No. 56.00
266 1100 Steel circular hollow pole of standard specification for street Each 7700.00
lighting to mount light at 9m height above road level.
267 1510 Tube anchorage set complete with bearing plate, permanent No. 12690.00
wedges etc.
268 1512 Bearing No. 0.55
269 1513 Bearing Rocker & Roller No. 4400.00
270 1516 Sheating duct ID 66mm Tonne 57200.00
271 1519 32mm mild steel dowel bars of grade S 240 Tonne 54637.00
272 1520 16mm deformed steel tie bars of grade S 415 Tonne 54637.00
273 1534 20 x 5 mm diagonals Kgs. 53.00
274 1553 Cast steel rocker bearing assemly of 250 tonne design load Nos. 78490.00
capacity duly painted complete with all its componets as per
specifications
PTTE sliding plate bearing assembly of 80 t. design load
275 1554 capacityNos. 78,490.00
duly painted complete with all its components as per drawing &
drawing and technical specification.
276 558 M.S. Angles 65 x 65 x 6mm 34.7 kgs Kgs. 53.00
277 562 38 mm dia of 14 guage MS Black pipe m 50.00
278 561 20mm dia hold fast rod No. 58.00
279 571 Stainless steel strips m 211.00
280 573 M.S. clamps for shoe Kgs. 54.00
281 576 Steel column 400 x 250mm (ISHB Series) Tonne 60512.00
282 577 Forged steel roller bearing of 250 tonne No. 3349.00
283 1103 Steel circular hollow pole of standard specification for street Each 4950.00
lighting to mount light at 5m height above road level
284 2022 MS flat 12x75mm Kgs 53.00
285 2021 MS Tubes Kgs 60.00
286 2027 50mm dia M.S. Hollow pipe B Class 14 Gauge Kgs 60.00
287 2028 20mm x 20mm vertical M.S. Square Straight Rod Kgs 54.00
288 2015 Gusset plates 6mm thick Kgs 59.00
289 2016 Base plate / base plate Kgs 59.00
290 2018 Anchor Bolts 750mm No. 127.00
291 2029 12x12 M.S. Square Rod Kgs 59.00
292 2030 16x16mm M.S. Square Rod Kgs 59.00
293 2031 40x6mm M.S. Plate Kgs 61.00
294 2032 12mmx6mm M.S. Plate Kgs 61.00
295 2033 Cat iron spike Nos. 88.00
296 2034 50x50 M.S. Hollow pipe Kgs 60.00
297 2036 36mm x 6mm M.S. Plates Kgs 60.00
298 2038 Stainless steel hollow pipes 14 gauge 50mm dia. Kgs 294.00
299 2039 Stainless steel hollow pipe 14 gauge 25mm dia. Kgs 294.00
300 2040 5" dia thick M.S. Plate Nos. 56.00
301 2067 MS Pipes of 80mm to 100mm dia Kgs 61.00
302 2068 RMS Gusset plate Kgs 68.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
303
304 2078 Stainless steel tubes 40mm, 14 gauge Kgs 281.00
305 2091 M.S. Tube m 264.00
306 489 M.S 20mm Square bar q 5287.00
307 0949 MS angle iron 40mm x 40mm x 6mm 23 metre in length at Kgs. 54.00
3.5 kg per metre
308 0950 MS angle iron 50mm x 50mm x 6mm 33.8 metre in length at Kgs. 54.00
4.5 kg per metre
309 0951 Runner flat 50 x5mm Kgs. 54.00
310 0952 Welded steel with fabric 75 x 50mm mesh at 4kg/sqm, Kgs. 54.00
4 x30 x 1.2+5% wastage
311 0953 Steel pipe 50mm external dia as per IS:1239 2.5mm thick m 176.00
312 0954 Medium wt. steel channel (ISMC series) 100mm x 50mm, Kgs. 55.00
10.8 metre length at 9.2 kg per m
14. wood work
313 0115 Corner beads 45 x 45 mm m 15.00
314 0190 Honne wood cum 68700.00
315 0191 Honne wood beading 10 mm wide m 15.00
316 0193 Honne wood beading 20x20mm m 21.00
317 0194 Honne wood scantling cum 68700.00
318 0195 Honne wood scantling for styles and rails 30mm thick cum 68700.00
319 0196 Honne wood scantling for styles abd rails 35 mm thick cum 68700.00
320 0198 Honne wood planks for shutters (frame) 35 mm thick cum 74200.00
321 0200 Honne wood planks for panels 20 mm thick cum 74200.00
322 0201 Honne wood battens cum 68700.00
323 0202 Honne wood beads cum 68700.00
324 0205 Jungle wood battens 25mm x 40mm cum 31300.00
325 0206 Jungle wood battens 50mm x 40mm cum 31300.00
326 0207 Jungle wood runners and planks cum 34000.00
327 0208 Jungle wood runners and planks cum 34000.00
328 0209 Jungle wood scantling cum 34000.00
329 0238 Mathi or Nandi wood cum 56000.00
330 0239 Mathi or Nandi wood planks for panels 20 mm thick cum 56000.00
331 0240 Mathi or Nandi wood scantling for styles and rails 25 mm thick cum 56000.00
332 0241 Mathi/Nandi wood cum 56000.00
333 0242 Mathi/Nandi wood battens cum 56000.00
334 0243 Mathi/Nandi wood beading 10 mm wide m 12.00
335 0244 Mathi/Nandi wood planks for panels 25 mm thick cum 56000.00
336 0245 Mathi/Nandi wood scantling cum 56000.00
337 0246 Mathi/Nandi wood scantling for styles and rails 30 mm thick cum 56000.00
338 0266 Nandi wood reepers 50x25 mm m 65.00
339 0269 NUWUD (MDF) panel filling 18 mm thick sqmt 495.00
340 0286 Panel filled with NUWUD (MDF) board 12 mm thick Sqm 420.00
341 0294 Planks for filing cum 12500.00
342 0332 Sal wood cum 46000.00
343 0333 Sal wood battens cum 46000.00
344 0389 Silver oak or equivalent planks 38 mm thick cum 24000.00
345 0417 Teak wood cum 1,23,000.00
346 0418 Teak wood beading 10mm wide cum 25.00
347 0419 Teak wood beading 20 x 20 mm m 60.00
348 0420 Teak wood cum 1,23,000.00
349 0421 Teak wood gutties Each 5.00
350 0422 Teak wood planks for panels 25 mm thick cum 1,40,000.00
351 0423 Teak wood reepers 50x25 mm m 150.00
352 0424 Teak wood scantling for styles and rails 30mm thick cum 1,40,000.00
353 0425 Teak wood scantling for styles and rails 35 mm thick cum 1,40,000.00
354 0426 Teak wood beads cum 1,40,000.00
355 0429 TW beading for fixing glass m 18.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
356 0463 Wooden strips of I class teak wood (25mm / 6mm) 4mtr. long Each 50.00
357 0490 Jungle wood reepers 50x25 mm m 35.00
358 0706 25 mm thick silver oak planks cum 17250.00
359 0798 Wooden blocks Nos. 172.00
360 0462 Wooden cleats Each 2.30
361 0080 Casuarina bellies 75 to 100mm dia m 25.00
362 0081 Casurina poles 100-150 mm m 42.00
363 0082 Casurina Poles 75-100 mm dia m 36.00
364 0869 Jungle wood cum 34000.00
365 0872 Wooden staff for fastening of flag 25mm dia, one m long Each 8.00
366 0961 Wooden ballies 8" dia & 9m long No. 250.00
367 0962 Wooden ballies 2" fia for bracing m 22.00
368 2002 50x35mm salwood crunnel cum 46000.00
369 2003 Teak wood gutties Nos. 1.50
370 2011 Teak wood beading m 24.00
15. Glass
371 0006 5.5 mm thick plain glass Sqm 590.00
372 0170 Glass shelf 600x120mm with guard rail Each 920.00
373 0171 Glass strips Sqm 517.00
374 0172 Glazing clips Kgs 195.00
375 0467 4mm thick plain glass Sqm 370.00
376 0324 Reeded glass Sqm 259.00
377 0325 Reeded glass 3mm thick Sqm 299.00
378 0538 Imported glass 6 mm thick Sqm 900.00
379 2012 12mm thick plain tuffened glass Sqm 1970.00
380 2014 12mm thick frosted toughened glass Sqm 1200.00
381 2071 Glass etching Sqm 1350.00
16. Fixtures
382 0005 25 mm dia pulley (for alluminium sliding door) Each 68.00
383 0011 Alluminium handles - 15 cms Each 58.00
384 0012 Alluminium hingles 75 mm length Each 38.00
385 0038 Bottom lock nail Each 47.00
386 0046 Brass screws 25 mm Each 2.10
387 0085 Center pulley Each 100.00
388 0086 Central ball bearing Each 127.00
389 0107 Cleat angles Each 53.00
390 0133 Door closure heavy duty floor mounting Each 1319.00
391 Door Lock Each 401.00
392 0177 Gusset plates 3.15 mm thick Kgs 61.00
393 0178 Handles powder coated 150 mm Each 56.00
394 0179 Handles to full width 2m long Each 1002.00
395 0188 Hingles 5" heavy duty Each 37.00
396 0189 Hold fasts MS Each 38.00
397 0220 Locking arrangements Each 633.00
398 0222 M.S. holder bat clamp 32mm Each 44.00
399 0225 Each 47.00
M.S. stays and clamps for 200mm length including bolts and nuts
400 0226 M.S. stays and clamps for 50mm length including bolts and nuts Each 26.00
401 0227 M.S. stays and clamps for 75mm length including bolts and nuts Each 33.00
402 0253 MS clamps Each 38.00
403 0254 MS cleats with bolts and nuts to rest on pipe Each 13.00
404 0256 MS handles oxidised 150mm Each 63.00
405 0261 MS side shed clamps Each 62.00
406 0265 Nails and screws Kgs 54.00
407 0314 Pulleys 38 mm dia Each 51.00
408 0326 Reeper nails 50 mm long Kgs 52.00
409 0384 screws 40mm Each 3.00
410 0388 Side guides Each 135.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
411 0399 Stays (MS) Each 20.00
412 0427 Tower bolt 300 mm long Each 116.00
413 0474 Pivots Nos 550.00
414 0540 Screws Nos. 4.00
415 0537 Box cleats Nos 38.00
416 0541 Anchor Bolts Nos. 17.00
417 0542 Galvanized brackets Nos 40.00
418 0708 Steel inserts with stainless steel bolts and nuts Kgs 74.00
419 0719 Bolts and nuts Kgs 84.00
420 0768 MS bolts, nuts and washers Tonne 89000.00
421 0710 Anchorages Each 120.00
422 0711 Anchor loops (IS 2062) Each 325.00
423 0712 Anchor plates (IS 2062) Each 235.00
424 0713 Anchorage Sets Each 100.00
425 0094 Chromium plated screws - 25 mm Each 4.00
426 0167 GI 'J' or 'L' hook with nuts and bolts 8 mm dia Each 17.00
427 0291 Pintels including welded pins Each 13.00
428 0492 C.P. Brass brackets Pair 33.00
429 2084 Hydraulic door clouser - aluminium body No. 897.00
17. Paintings
430 0015 Aluminium paint L 198.00
431 0016 Aluminium paint primer (red oxide) L 99.00
432 0020 Anticorrosive bitumastic paint L 132.00
433 0033 Black Japan paint L 110.00
434 0131 Dark shade pigment Kgs 202.00
435 0132 Distemper primer L 66.00
436 0136 Dry Distemper Kgs 66.00
437 0137 Enamel metal paint L 250.00
438 0138 Enamel primer L 99.00
439 0214 Light shade pigment Kgs 180.00
440 0247 Medium shade pigment Kgs 211.00
441 0285 Paint remover L 100.00
442 0289 Pigment Kgs 110.00
443 0290 Pink primer paint L 99.00
444 0300 Plastic emulsion paint L 220.00
445 0320 Ready mix primer paint L 83.00
446 0321 Ready mix red lead paint L 83.00
447 0323 Red oxide Kgs 88.00
448 0430 Undercoat flatting varnish L 155.00
449 0431 Unslaked lime qtls 305.00
450 0432 Varnish L 110.00
451 0433 Wall paint L 181.00
452 0435 Water proof cement paint Kgs 56.00
453 0438 Wax polish Kgs 223.00
454 0271 Oil bound distemper Kgs 66.00
455 0428 Turpentine Oil L 33.00
456 0543 Anodized RF painting Sqm 330.00
457 0447 White lead paint for priming L 110.00
458 0461 Whitening Kgs 22.00
459 0528 Wax Kgs 198.00
460 0529 Sealer Coat L 220.00
461 0530 Melamine Patty Kgs 210.00
462 0531 melamine Polish L 220.00
463 0532 Thinner L 153.00
464 0775 Paint I quality (synthetic enamel paint) L 198.00
465 0776 Pigments Kgs 60.00
466 0784 Road marking paint L 275.00
467 0779 Primer (for painting sides for sealing coat) L 77.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
468 0173 Gopi powder Kgs 60.00
469 0218 Linseed Oil L 104.00
470 0219 Liquid wood filler L 148.00
471 0524 Sand paper Dozen 40.00
472 0525 50 size sand paper Dozen 40.00
473 0526 36 size sand paper Dozen 40.00
474 569 Primer Kgs 104.00
475 0528 Wax Kgs 198.00
476 0529 Sealer Coat L 220.00
477 0530 Melamine Patty Kgs 210.00
478 0531, 2020 Melamine Polish L 220.00
479 0532 Thinner L 153.00
480 0543 Anodized M R F painting Sqm 330.00
481 1504 Epoxy resin hardner mix for primne coat Kgs 660.00
482 2044 Light House Polish L 206.00
483 2045 Texture material Kgs 28.00
484 2046 Antifungal paint L 294.00
485 2050 Textured based white cement Kgs 46.00
486 2060 Soap powder Kgs 120.00
487 2081 Wiping cloths Each 23.00
488 2083 Soap oil / Phenol L 44.00
489 2092 Solvent cement adhesive L 194.00
490 0995 Water based paint for cement concrete surface L 39.00
18. PIPES
491 0021 Asbestos cement pipes 75 mm dia of length 2 mtrs Each 140.00
492 0095 CI Bends 100 mm dia Each 338.00
493 0096 CI Bends 75 mm dia Each 275.00
494 0097 CI Bends 90 mm dia Each 143.00
495 0098 CI heads 100mm dia Each 172.00
496 0099 CI pipe 100mm dia of 1.8 m length Each 1338.00
497 0100 CI Pipes 75 mm dia of 1.8m length Each 1088.00
498 0101 CI shoes 100mm dia Each 286.00
499 0102 CI shoes 110mm dia Each 320.00
500 0103 CI shoes 75 mm dia Each 238.00
501 0146 G.I. Overflow pipe 20mm dia m 149.00
502 0147 G.I. Pipe 100mm dia B class m 802.00
503 0148 G.I. Pipe 150mm dia B class m 1208.00
504 0149 G.I. Pipe 15mm dia B class m 109.00
505 0150 G.I. Pipe 20mm dia B class m 137.00
506 0151 G.I. Pipe 25mm dia B class m 197.00
507 0152 G.I. Pipe 32mm dia B class m 223.00
508 0153 G.I. Pipe 40mm dia B class m 279.00
509 0154 G.I. Pipe 50mm dia B class m 321.00
510 0155 G.I. Pipe 65mm dia B class m 480.00
511 0156 G.I. Pipe 80mm dia B class m 611.00
512 0157 G.I. Tee 32mm Each 100.00
513 0158 G.I. Tee 65mm Each 350.00
514 0169 G.I. Washers Each 14.00
515 0182 HDPE 110 mm dia, 4kg/sqcm m 183.00
516 0183 HDPE 110 mm outer dia, 2.5kg/sqcm m 185.00
517 0184 HDPE 90 mm outer dia, 4kg/sqcm m 143.00
518 0185 HDPE 90mm outer dia 2.5 kg/sqcm (rain down water pipes) m 120.00
519 0212 P.V.C. Lead connection pipe 32mm dia (for wash basin) Each 137.00
520 0303 Polyethylene pipes high density 32mm external dia m 155.00
521 0304 Polyethlene pipes high density 40mm external dia m 172.00
522 0305 Polyethlene pipes high density 50mm external dia m 235.00
523 0306 Polyethlene pipes low density 20mm external dia m 44.00
524 0307 Polyethlene pipes low density 25mm external dia m 63.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
525 0308 Polyethlene pipes low density 32mm external dia m 115.00
526 0309 Polyethlene pipes low density 40mm external dia m 143.00
527 0310 Polyethlene pipes low density 50mm external dia m 172.00
528 0335 Sand cast iron bend 100mm dia with access door, washers, Each 378.00
bolts and nuts
529 0336 Sand cast iron bend 50mm dia with access door, washers, Each 286.00
bolts and nuts
530 0337 Sand cast iron bend 75mm dia with access door, washers, Each 309.00
bolts and nut
531 0338 Sand cast iron pipe 100mm dia 1.8m length Each 802.00
532 0339 Sand cast iron pipe 50mm dia 1.8m length Each 378.00
533 0340 Sand cast iron pipe 75mm dia 1.8m length Each 779.00
534 0342 Sand cast iron plain bend 50mm dia Each 229.00
535 0344 Sand cast iron soil waste 114mm offsets 3" dia Each 326.00
536 0345 Sand cast iron soil waste 152mm offsets 3" dia Each 555.00
537 0346 Sand cast iron soil waste 230mm offsets 3" Each 600.00
538 0347 Sand cast iron soil waste double equal invert Each 836.00
plain branches of required degree 100x100x100x100mm
539 0348 Sand cast iron soil waste double equal invert Each 342.00
plain branches of required degree 50x50x50x50mm
540 0349 Sand cast iron soil waste double equal invert Each 550.00
plain branches of required degree 75x75x75x75mm
541 0350 Sand cast iron soil waste double equal junction of required Each 721.00
degee 100x100x100x100mm
542 0351 Sand cast iron soil waste double equal junction of required Each 342.00
degee 50x50x50x50mm
543 0352 Sand cast iron soil waste double equal junction of required Each 916.00
degree with access door, rubber washers bolts and nuts,
100x100x100x100mm
544 0353 Sand cast iron soil waste double equal junction of required Each 802.00
degree with access door, rubber washers bolts and nuts,
100x100x50x50mm
545 0354 Sand cast iron soil waste double equal junction of required Each 916.00
degree with access door, rubber washers bolts and nuts,
100x100x75x75mm
546 0355 Sand cast iron soil waste double equal junction of required Each 660.00
degree with access door, rubber washers bolts and nuts,
75x75x75x75mm
547 0356 Sand cast iron soil waste double equal junction of required Each 492.00
degree with access door, rubber washers bolts and nuts,
75x75x50x50mm
548 0357 Sand cast iron soil waste double unequal invert plain branches Each 607.00
of required degree 100x100x75x75mm
549 0359 Sand cast iron soil waste double unequal invert plain branches Each 893.00
of required degree 100x100x75x75mm
550 0360 Sand cast iron soil waste double unequal invert plain branches Each 555.00
of required degree 75x75x50mm
551 0361 Sand cast iron soil waste double unequal invert plain branches Each 458.00
of required degree 75x75x50x50mm
552 0362 Sand cast iron soil waste double unequal junction of required Each 916.00
degree 100x100x50x50mm
553 0363 Sand cast iron soil waste double unequal junction of required Each 922.00
degree 100x100x75x75mm
554 0364 Sand cast iron soil waste double unequal junction of required Each 344.00
degree 75x75x50x50mm
555 0365 Sand cast iron soil waste single equal invert plain branches Each 802.00
of required degree 100x100x100x100mm
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
556 0366 Sand cast iron soil waste single equal invert plain branches Each 504.00
of required degree 50x50x50x50mm
557 0367 Sand cast iron soil waste single equal invert plain branches Each 573.00
of required degree 75x75x75x75mm
558 0368 Sand cast iron soil waste single equal junction of required Each 573.00
degree with access door, rubber washers bolts and nuts,
75x75x75mm
559 0369 Sand cast iron soil waste single equal junction of required Each 784.00
degree with access door 100x100x100mm
560 0370 Sand cast iron soil waste single equal junction of required Each 441.00
degree with access door 50x50x50mm
561 0371 Sand cast iron soil waste single equal junction of required Each 573.00
degree with access door 75x75x75mm
562 0372 Sand cast iron soil waste single equal junction of required Each 802.00
degree with access door, rubber washers bolts and nuts,
100x100x100mm
563 0373 Sand cast iron soil waste single equal junction of required Each 504.00
degree with access door, rubber washers bolts and nuts,
50x50x50mm
564 0374 Sand cast iron soil waste single unequal junction of required Each 401.00
degree 100x100x50mm
565 0375 Sand cast iron soil waste single unequal junction of required Each 395.00
degree 100x100x75mm
566 0376 Sand cast iron soil waste single unequal junction of required Each 332.00
degree 75x75x50mm
567 0377 Sand cast iron soil waste single unequal junction of required Each 653.00
degree with access door, rubber washers, bolts and nuts,
100x100x50mm
568 0378 Sand cast iron soil waste single unequal junction of required Each 687.00
degree with access door, rubber washers, bolts and nuts,
100x100x75mm
569 0379 Sand cast iron soil waste single unequal junction of required Each 452.00
degree with access door, rubber washers, bolts and nuts,
75x75x50mm
570 0380 Sand cast iron solid waste double equal junction of required Each 573.00
degree with access door, rubber washers, bolts and nuts,
50x50x50x50mm
571 0381 Sand cast iron trap 100mm dia Each 567.00
572 0382 Sand cast iron trap 50mm dia Each 447.00
573 0383 Sand cast iron trap 75mm dia Each 498.00
574 0393 Special for overview pipe Each 40.00
575 0402 Stoneware pipes 100mm dia 60 cms long Each 60.00
576 0403 Stoneware pipes 150mm dia 60 cms long Each 100.00
577 0404 Stoneware pipes 200mm dia 60 cms long Each 140.00
578 0405 Stoneware pipes 230mm dia 60 cms long Each 150.00
579 0406 Stoneware pipes 250mm dia 60 cms long Each 160.00
580 0407 Stoneware pipes 300mm dia 60 cms long Each 175.00
581 0408 Stoneware pipes 350mm dia 60 cms long Each 180.00
582 0409 Stoneware pipes 400mm dia 60 cms long Each 190.00
583 0410 Stoneware pipes 450mm dia 60 cms long Each 225.00
584 0476 100 mm dia asbestos cement pipe of length 2 mtrs Each 120.00
585 0477 110 mm outer dia 2 kg/sqcm pressure pipe of approved make(PVC) m 172.00
586 0478 110 mm outer dia 2.5 kg/sqcm pressure pipe of approved make(PVC) m 177.00
587 0479 90 mm outer dia 2 kg/sqcm pressure pipe of approved m 132.00
make (PVC)
588 0493 Sand cast iron waste double equal junction of required m 527.00
degree, 75x75x75x75 mm
589 0534 M.S. Square pipe 16G Black pipe Kg 57.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
590 0702 100 mm asbestos cement pipes m 50.00
591 0703 100 mm dia 1 m long GI pipe m 824.00
592 0755 HDPE pipes - 90mm dia m 120.00
593 0782 RCC pipes NP3 1200 mm dia including collars m 6600.00
594 0783 RCC pipes NP3 900 mm dia including collars m 4200.00
595 0821 RCC pipes NP3 300 mm dia including collars m 1000.00
596 0822 RCC pipes NP3 450 mm dia including collars m 1840.00
597 0823 RCC pipes NP3 600 mm dia including collars m 2330.00
598 0824 RCC pipes NP3 750 mm dia including collars m 2560.00
599 0825 RCC pipes NP2 300 mm dia including collars m 700.00
600 0826 RCC pipes NP2 450 mm dia including collars m 1000.00
601 0827 RCC pipes NP2 600 mm dia including collars m 1500.00
602 0828 RCC pipes NP2 750 mm dia including collars m 1900.00
603 0829 RCC pipes NP2 900 mm dia including collars m 2500.00
604 0830 RCC pipes NP2 1200 mm dia including collars m 4300.00
605 0831 RCC pipes NP4 900 mm dia including collars m 5100.00
606 0832 RCC pipes NP4 1200 mm dia including collars m 8300.00
607 565 RCC pipes NP2 150 mm dia including collars m 300.00
608 566 RCC pipes NP2 250 mm dia including collars m 400.00
609 0911 RCC pipes NP2 200 mm dia, 2.5m long for drainage m 250.00
610 0929 Plastic tubes 50cm dia, 1.2m high Nos. 36.00
611 565 RCC pipes NP2 150 mm dia including collar m 300.00
612 566 RCC pipes NP2 250 mm dia including collar m 400.00
613 568 RCC pipes NP4 1000 mm dia including collar m 7600.00
19. water supply
614 0001 100mm 'S' or 'P' trap Each 60.00
615 0023 Bevel lead edge mirror of superior glass of size 600x450mm Each 850.00
616 0024 Bib cock 15mm nominal bore - NP Each 170.00
617 0025 Bib cock 20mm nominal bore - NP Each 189.00
618 0026 Bib cock 25mm nominal bore - NP Each 212.00
619 0027 Bib cock 32mm nominal bore - NP Each 287.00
620 0028 Bib cock 40mm nominal bore - NP Each 287.00
621 0029 Bib cock 50mm nominal bore - NP Each 343.00
622 0034 Black plastic seat and lid as specified Each 286.00
623 0040 Brass ball valve with plastic float 15mm nominal bore Each 280.00
624 0041 Brass ball valve with plastic float 20mm nominal bore Each 300.00
625 0042 Brass ball valve with plastic float 25mm nominal bore Each 450.00
626 0043 Brass ferrule and C.I. Mouth cover 15mm nominal bore Each 100.00
627 0044 Brass ferrule and C.I. Mouth cover 20mm nominal bore Each 150.00
628 0045 Brass ferrule and C.I. Mouth cover 25mm nominal bore Each 180.00
629 0047 Brass shower rose C.P. 100 mm dia Each 555.00
630 0048 Brass shower rose C.P. 100mm dia Each 600.00
631 0049 Brass stop cock - 15mm Each 200.00
632 0050 Brass union 15mm nominal bore with PVC connection pipe Each 150.00
300mm length
633 0051 Brass union 15mm nominal bore with PVC connection pipe Each 175.00
450mm length
634 0052 Brass union 20mm nominal bore with PVC connection pipe Each 175.00
300mm length
635 0053 Brass union 20mm nominal bore with PVC connection pipe Each 200.00
450mm length
636 0067 C.I. manhole cover with frame 610x455mm size (38kgs) Each 2200.00
637 0068 C.I./M.S. brackets for flushing cistern Pair 100.00
638 0069 C.I. Cover 500mm dia - 50mm thick (16kgs) Each 1030.00
639 0070 C.P. brass chain with plug Each 1250.00
640 0071 C.P. brass chain with stainless steel plug Each 215.00
641 0072 C.P. brass pillar tap elbow operated Each 460.00
642 0073 C.P. brass screws 25mm with washers Each 5.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
643 0074 C.P. brass towel rail 600mm length 20mm dia Each 450.00
644 0075 C.P. brass towel rail 740mm length 20mm dia Each 500.00
645 0076 C.P. brass waste union 32mm of standard pattern Each 120.00
646 0077 C.P. brass waste union 40mm with fittings Each 183.00
647 0079 Cast Iron foot rest Each 131.00
648 0105 Circular shape mirror of size 450mm dia with plastic Each 515.00
moulded frame
649 0114 Copper plated brass piller tap Each 230.00
650 0117 Gun metal non-return valve 100mm nominal bore horizontal type Each 2290.00
651 0118 Gun metal non-return valve 100mm nominal bore vertical type Each 2347.00
652 0119 Gun metal non-return valve 25mm nominal bore horizontal type Each 515.00
653 0120 Gun metal non-return valve 25mm nominal bore vertical type Each 415.00
654 0121 Gun metal non-return valve 32mm nominal bore horizontal type Each 665.00
655 0122 Gun metal non-return valve 32mm nominal bore vertical type Each 665.00
656 0123 Gun metal non-return valve 40mm nominal bore horizontal type Each 859.00
657 0124 Gun metal non-return valve 40mm nominal bore vertical type Each 802.00
658 0125 Gun metal non-return valve 50mm nominal bore horizontal type Each 1202.00
659 0126 Gun metal non-return valve 50mm nominal bore vertical type Each 1145.00
660 0127 Gun metal non-return valve 65mm nominal bore horizontal type Each 1660.00
661 0128 Gun metal non-return valve 65mm nominal bore vertical type Each 1431.00
662 0129 Gun metal non-return valve 80mm nominal bore horizontal type Each 1947.00
663 0130 Gun metal non-return valve 80mm nominal bore vertical type Each 1740.00
664 0139 European type water closet of specified make Each 1050.00
665 0143 G.I. 32mm dia telescopic flush pipes with fittings / specials Set 350.00
666 0144 G.I. Flush pipe of standard size and C.P. brass spreaders, Set 500.00
brass unions and clamps including fittings
667 0145 G.I. Jam nut Each 23.00
668 0159 Gate valve 15mm nominal bore - gun metal Each 250.00
669 0160 Gate valve 20mm nominal bore - gun metal Each 316.00
670 0161 Gate valve 25mm nominal bore - gun metal Each 460.00
671 0162 Gate valve 32mm nominal bore - gun metal Each 750.00
672 0163 Gate valve 40mm nominal bore - gun metal Each 1000.00
673 0164 Gate valve 50mm nominal bore - gun metal Each 1600.00
674 0165 Gate valve 65mm nominal bore - gun metal Each 2050.00
675 0166 Gate valve 80mm nominal bore - gun metal Each 2462.00
676 0204 Indian type water closet of size 580 mm of specified make Each 687.00
with footrests
677 0273 Orissa pattern of size 575x425 mm with integral type foot rests Each 1400.00
678 0274 Oval shape mirror of size 450x350mm with plastic Each 580.00
moulded frame
679 0275 P.V.C. automatic flushing cistern 7.5 litres with fittings Each 687.00
680 0276 P.V.C. automatic flushing cistern with fittings 10 lts Each 744.00
681 0277 P.V.C. automatic flushing cistern with fittings 15 litrs Each 801.00
682 0278 P.V.C. flushing cistern 10 litres low level with accessories Each 650.00
40mm flush pipe
683 0279 P.V.C. pipes unplasticised 16mm m 44.00
684 0280 P.V.C. Pipes unplasticised 20mm m 46.00
685 0281 P.V.C. Pipes unplasticised 25mm m 56.00
686 0282 P.V.C. Pipes unplasticised 32mm m 65.00
687 0283 P.V.C. automatic flushing cistern 5 litres with fittings Each 500.00
688 0284 P.V.C. flushing cistern 10 lts low level with fitting Each 600.00
689 0411 Stop cock Each 125.00
690 0434 Water meter Each 744.00
691 0302 Polythlene water storage tank of specified capacity and make L 6.20
692 0322 Rectangular shape mirror of size 1500x450mm with plastic Each 1174.00
moulded frame
693 0396 Stainless steel kitchen sink of size 400x470mm with drain Each 4500.00
board of specified make
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
694 0397 Stainless steel kitchen sink of size 500x1000mm with drain Each 6900.00
board of specified make
695 0398 Stainless steel kitchen sink of size 510x1575mm with drain Each 13600.00
board of specified make
696 0440 White glazed fire clay kitchen sink of size 600x450x250mm Each 1400.00
697 0441 White glazed fire clay kitchen sink of size 750x450x250mm Each 1660.00
698 0442 White glazed fire clay laboratory sink of size 450x300x150mm Each 900.00
699 0443 White glazed fire clay laboratory sink of size 600x450x200mm Each 1145.00
700 0446 White glazed/vitreous china clay 10 lts low level flushing Set 1832.00
cistern, with fittings and/brackets and 40mm white C.P.flush pipe
701 0449 White vitreous china clay angle back wash basin size Each 773.00
500x400mm
702 0450 White vitreous china clay angle back wash basin size Each 1000.00
600x480mm
703 0451 White vitreous china flat back lipped front urinal basin of Each 700.00
430x260x350mm size
704 0453 White vitreous china flat back large urinal basin of size Each 2060.00
580x380x350mm
705 0454 White vitreous china clay flat back wash basin size 450x330mm Each 600.00
706 0455 White vitreous china clay flat back wash basin size 550x400mm Each 780.00
707 0456 White vitreous china clay flat back wash basin size 630x450mm Each 900.00
708 0457 White vitreous china clay squatting plate Each 1000.00
709 0458 White vitreous china clay surgeon type wash basin size Each 1000.00
660x460mm
710 0460 White vitreous china clay wall corner type, lipped front urinal Each 630.00
basin of size 340x410x265mm
711 0487 C.P. brass tap with union Each 285.00
712 0491 Rectangular shape mirror of size 453x357mm with plastic Each 802.00
713 0546 Ceramic tiles of size 30x30 cms Sqm 435.00
714 2035 Colour Glazed tiles 30x60 cms thick Each 85.00
715 2096 L. Bracket Nos. 29.00
716 0542 Galvanized L brackets Nos. 40.00
717 2079 Granite sink 23cm thick Each 10305.00
718 2098 Rubber Gaskete m 17.00
20 Miscellaneous
719 0083 Caustic soda Kgs 46.00
720 0092 Chicken mesh Sqm 19.00
721 0168 GI plaster mesh 0.35 mm thick 10 cms wide m 35.00
722 0251 Mosquito proof coupling 25mm Each 29.00
723 0295 Plaster mesh 150mm wide m 23.00
724 0296 Plaster mesh 200mm wide m 29.00
725 0297 Plaster mesh 200mm wide m 35.00
726 0318 Rabbit wire mesh Sqm 63.00
727 0548 Weld Mesh 75mm x 25mm of 6G to 10G Sqm 280.00
728 0549 Weld Mesh 75mm x 50mm of 6G to 10G Sqm 213.00
729 0729 Copper plate12 m long x 250 mm wide Kgs 460.00
730 0796 Wire crate size (1.8 x 1.8m x 0.9m) = 2.916 Kgs 172.00
(4mm dia 2GI wire in 15 cms x 15 cms mesh)
731 0797 Wire mesh 50 mm x 50 mm Sqm 322.00
732 0816 Form work for kerb stone / Km stone Sqm 20.00
733 0104 Cinder ballast cum 287.00
734 0093 Chlorophriphos emulsitiable concentrate L 200.00
735 0065 Burnt lime / shell lime q 345.00
736 0141 Fly ash cum 20.00
737 0142 Fuel (firewood) q 550.00
738 0210 Keroscene oil L 45.00
739 0215 Lime cum 2743.00
740 0216 Lime surkhi mortar 1:2 cum 500.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
741 0263 Mud mortar cum 230.00
742 0267 Nitric Acid L 80.00
743 0299 Plaster of Paris Kgs 21.00
744 0394 Spirit L 46.00
745 0412 Surkhi cum 345.00
746 0436 Water proofing compound Kgs 46.00
747 0483 Diesel L 57.00
748 0709 Admixture / Super plasticizer L 207.00
749 0715 Bentonite Tonne 4800.00
750 0741 Epoxy for mortar Kgs 172.00
751 0742 Epoxy for tack coat Kgs 345.00
752 0743 Epoxy material for fixing Kgs 207.00
753 0760 Joint filler (0.01 cm wide and 0.12 mm wide) Sqm 230.00
754 0761 Joint sealing com 25 mm deep Kgs 168.00
755 811 Chloroperene C.C. 1.00
756 0812 Natural Rubber C.C. 1.00
757 0813 Neoprene Kgs 230.00
758 0818 Water KL 40.00
759 0268 Northlight adjustable ridges of 1.22 m Pair 150.00
760 0270 Nylon rollers Each 6.00
761 0315 Putty for filling holes Kgs 80.00
762 0319 Rawl plug 40 to 50mm Each 2.50
763 0317 PVC beading Sqm 12.00
764 0328 Roofing felt Type-2 grade-1 fibre based self finish and Sqm 110.00
bituminous based
765 0329 Rubber heading for shutters beading m 35.00
766 0392 Spun yarn Kgs 40.00
767 0413 Suspension shaft m 950.00
768 0516 Plastic sheet Sqm 6.00
769 0527 Steel wool Pack 25.00
770 0535 Glazing seal m 350.00
771 0536 Weather Seal Nos 200.00
772 0539 Spacer tape Sqm 40.00
773 0704 20 mm thick compressible fiber band 12 m long x 25 cm deep Sqm 410.00
774 0705 20 mm thick filler 12 m long x 25 cm deep Sqm 430.00
775 0737 Deviator plates Tonne 46000.00
776 0740 Elastomeric slab with MS plates inserted inside polysulphine C.C. 0.50
compound filling space around bolts and nuts
777 0774 Nipples Each 10.00
778 0788 Sheathing duct ID m 15.00
779 0809 PTFE Nodules Sq.cm 8.00
780 0810 PTFE Nodules cm 0.10
781 0331 S.F.R.C. Cover and frame 560mm (ID) heavy duty Each 900.00
782 0850 Fine Grass Kgs 7.00
783 0851 Hedge Plant Each 3.00
784 0852 Flowring Plants Each 2.50
785 0853 Shrubs Each 2.00
786 0854 Sapling 2m high 25mm dia Each 10.00
787 0855 Neem cake q 900.00
788 0856 Empty bitumen drum Each 100.00
789 0857 Rivets Each 3.00
790 0858 Steel wire 3mm dia Kgs 45.00
791 0859 Sapling 1 to 1.5m high 2cm dia stem Nos. 8.00
792 0861 Traffic 1 to 1.5m high 2cm dia stem Nos. 400.00
793 0871 Flag of red colour cloth 600 x 600mm Each 20.00
794 0900 Supply of quarried stone 150-200mm size cum 42.00
795 0901 Stone Boulder of size 150mm and below cum 402.00
796 0910 Precast cement concrete tiles Tiles size 300 x 300mm & Nos. 26.00
Sl. Rate
Code No. Material Component Name No. Unit
No. Rs. Ps.
25 mm thick
797 1104 Jute Rope m 5.50
798 0925 Cold milling machine at 20cum per hour cum 20.00
799 0927 Scrap tyres of size 900 x 20 Nos. 218.00
800 0928 20mm steel wire rope Kgs. 40.00
801 0933 Geotextile filter fabric Sqm 76.00
802 0934 Performed geosynthetic pipe 150mm dia m 250.00
803 0935 Paving fabric Sqm 20.00
804 0936 Geogrids Sqm 310.00
805 0937 Connectors / Staples Each 6.00
806 0938 Polymer braids m 32.00
807 0945 Hot applied thermoplastic compound L 110.00
808 0946 Reflectorising glass beads Kgs. 55.00
809 0947 Cost of approved type of delineators from ISI certified firm Each 260.00
as per the standard drawing given in IRC : 79
810 0948 Barbed wire 335 metre length at 9.38 kg per 100 metre Kgs. 35.00
811 0960 Sand bags (Cost of sand in empty cement bag) No. 50.00
812 0964 Admixture Kgs. 65.00
813 0966 M 35 grade RCC corvel provided for supporting of equipment cum 4200.00
814 0971 Nuts and bolts Kgs. 52.00
815 0980 Elastomeric slab seal expansion, joint assembly manufactured m 12660.00
by using chloroprene, elastomer for elastomeric slab unit
confirming to clause 9150.1 of IRC : 83 (part II) conforming to
clause 2600.6 of MORTH specification.
816 0982 Preformed continuous chloroprene elastomer or closed cell m 13715.00
foam sealing element with high mtear strength, vulcanised in
a single operation for the full length of a joint of ensure water
tightness.
817 0983 Supply of complete assembly of strip seal expansion joint m 12325.00
comprising of edge beams, anchorage, strip seal element and
complete accessories as per approved specifications and
drawings.
818 0984 Supply of a modular strip / box seal joint assembly comprising m 5697.00
of edge beams, central beam, 2 modules chloroprene seal,
anchorage elements, support and control system, all steel
sections protected against corrision and installed by the
manufacturer or his authorised representative.
819 0985 Supply of a modular box/box seal joint assembly containing m 6857.00
3 modular / cells and comprising of edge beams, two central
beams, chloroprene seal, anchorage elements, support and
control system, all steel sections protected against corrosion
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
4 Kirloskar Pumps 36200.00 5.50% 38191.00
15 7.5hp/5.5kw 12 1 1 atalanta pumps pvt.ltd 33100.00 5.50% 34920.50
2 suguna pumps 34570.00 5.50% 36471.35
3 c.r.i. pumps pvt. ltd 39662.00 5.50% 41843.41
4 Kirloskar Pumps - - -
16 7.5hp/5.5kw 14 1 1 atalanta pumps pvt.ltd 34300.00 5.50% 36186.50
2 suguna pumps 32370.00 5.50% 34150.35
3 c.r.i. pumps pvt. ltd 40680.00 5.50% 42917.40
4 Kirloskar Pumps 41500.00 5.50% 43782.50
17 7.5hp/5.5kw 16 1 1 atalanta pumps pvt.ltd 35200.00 5.50% 37136.00
2 suguna pumps 38320.00 5.50% 40427.60
3 c.r.i. pumps pvt. ltd 45391.00 5.50% 47887.51
4 Kirloskar Pumps - - -
18 10hp/7.5kw 8 1 1 atalanta pumps pvt.ltd 34750.00 5.50% 36661.25
2 suguna pumps 37220.00 5.50% 39267.10
3 c.r.i. pumps pvt. ltd 42778.00 5.50% 45130.79
4 Kirloskar Pumps 47450.00 5.50% 50059.75
19 10.0hp/7.5kw 10 1 1 atalanta pumps pvt.ltd 35750.00 5.50% 37716.25
2 suguna pumps 38440.00 5.50% 40554.20
3 c.r.i. pumps pvt. ltd 46320.00 5.50% 48867.60
4 Kirloskar Pumps 45400.00 5.50% 47897.00
20 10.0hp/7.5kw 16 1 1 atalanta pumps pvt.ltd 36100.00 5.50% 38085.50
2 suguna pumps 43660.00 5.50% 46061.30
3 c.r.i. pumps pvt. ltd 46278.00 5.50% 48823.29
4 Kirloskar Pumps 45550.00 5.50% 48055.25
21 10.0hp/7.5kw 20 1 1 atalanta pumps pvt.ltd 40100.00 5.50% 42305.50
2 suguna pumps 47380.00 5.50% 49985.90
3 c.r.i. pumps pvt. ltd 52016.00 5.50% 54876.88
4 Kirloskar Pumps 51150.00 5.50% 53963.25
22 12.5hp/9.3kw 16 1 1 atalanta pumps pvt.ltd 51800.00 5.50% 54649.00
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps - - -
23 12.5hp/9.3kw 20 1 1 atalanta pumps pvt.ltd 54200.00 5.50% 57181.00
2 suguna pumps 50110.00 5.50% 52866.05
3 c.r.i. pumps pvt. ltd 56952.00 5.50% 60084.36
4 Kirloskar Pumps - - -
24 12.5hp/9.3kw 25 1 1 atalanta pumps pvt.ltd 57650.00 5.50% 60820.75
2 suguna pumps 54650.00 5.50% 57655.75
3 c.r.i. pumps pvt. ltd 60096.00 5.50% 63401.28
4 Kirloskar Pumps - - -
25 12.5hp/9.3kw 10 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps 55850.00 5.50% 58921.75
26 12.5hp/9.3kw 12 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps 55150.00 5.50% 58183.25
27 12.5hp/9.3kw 24 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps 60150.00 5.50% 63458.25
28 15.0Hp/11kw 16 1 1 atalanta pumps pvt.ltd 59600.00 5.50% 62878.00
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
Rate list of materials (Submarsible Three phase) for SR of 2013-14
Sl. Code 2012-13
Item Stage Unit Brand Basic Rate Taxes Total rate Remarks
No. No. SR rate
1 2 3 4 5 6 7 8 9 10
4 Kirloskar Pumps - - -
29 15.0hp/11kw 20 1 1 atalanta pumps pvt.ltd 60000.00 5.50% 63300.00
2 suguna pumps 51660.00 5.50% 54501.30
3 c.r.i. pumps pvt. ltd 58002.00 5.50% 61192.11
4 Kirloskar Pumps - - -
30 15.0hp/11kw 25 1 1 atalanta pumps pvt.ltd 61800.00 5.50% 65199.00
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd 63056.00 5.50% 66524.08
4 Kirloskar Pumps - - -
31 15.0hp/11kw 15 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd 54628.00 5.50% 57632.54
4 Kirloskar Pumps 61600.00 5.50% 64988.00
32 15.0hp/11kw 28 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps 66350.00 5.50% 69999.25
33 15.0hp/11kw 30 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps 67550.00 5.50% 71265.25
34 17.5hp/13kw 30 1 1 atalanta pumps pvt.ltd 72000.00 5.50% 75960.00
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd 69390.00 5.50% 73206.45
4 Kirloskar Pumps - - -
35 17.5hp/13kw 29 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps 70550.00 5.50% 74430.25
36 20hp/15kw 20 1 1 atalanta pumps pvt.ltd 64000.00 5.50% 67520.00
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd 74526.00 5.50% 78624.93
4 Kirloskar Pumps 71200.00 5.50% 75116.00
37 20hp/15kw 30 1 1 atalanta pumps pvt.ltd 73250.00 5.50% 77278.75
2 suguna pumps - - -
3 c.r.i. pumps pvt. ltd 77326.00 5.50% 81578.93
4 Kirloskar Pumps - - -
38 20hp/15kw 16 1 1 atalanta pumps pvt.ltd - - -
2 suguna pumps 62320.00 5.50% 65747.60
3 c.r.i. pumps pvt. ltd - - -
4 Kirloskar Pumps - - -
Rate list of materials (Submarsible Singal phase) for SR of 2013-14
Sl. Code 2012-13
Item Stage Unit Brand Basic Rate Taxes Total rate Remarks
No. No. SR rate
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Sl. Rate
Code No. Hire charges Components Name Unit
No. Rs. Ps.
117 999 Compressor with guniting equipment along with accessories hr 275.00
Statement showing the labour rates,
KPW & IWTD mysore circle for the year 2013-14
Annexure - 1
(For Payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
Equivalent
72 Laboratory Attender ### 52.20 192.40 139.20 52.20 191.40
Cadre
73 Watchman / Peon ### 52.20 193.38 139.61 52.20 191.81
Equivalent
74 Gurkha Watchman ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
75 Cartman with cart and single ### 52.20 192.40 139.20 52.20 191.40
Cadre
bullock
Equivalent
76 Cartman with cart and double ### 52.20 192.40 139.20 52.20 191.40
Cadre
bullock
77 Hot asphalt spraying mazdoor ### 52.20 192.40 139.20 52.20 191.40
Equivalent
78 Hot asphalt premix spraying ### 52.20 192.40 139.20 52.20 191.40
Cadre
mazdoor
Equivalent
79 Spun pipe moulder Class I ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
80 Spun pipe moulder Class II ### 52.20 192.40 139.20 52.20 191.40
Cadre
81 Patkary / Sowdy / Neerganti ### 52.20 192.40 139.20 52.20 191.40
82 Horticultural Assistant (Trained) ### 52.20 192.40 139.20 52.20 191.40
Equivalent
83 Boatman (Licenced) with boat ### 52.20 192.40 139.20 52.20 191.40
Cadre
84 Boatman ### 52.20 192.40 139.20 52.20 191.40
Equivalent
85 Guage Reader ### 52.20 192.40 139.20 52.20 191.40
Cadre
86 Sweeper ### 52.20 192.40 139.20 52.20 191.40
87 Chawalies ### 52.20 192.40 139.20 52.20 191.40
Equivalent
88 Navaganies ### 52.20 192.40 139.20 52.20 191.40
Cadre
89 Brick layer Class I / Moulder ### 52.20 192.40 139.20 52.20 191.40
90 Brick Layer Class II ### 52.20 192.40 139.20 52.20 191.40
91 Fireman ### 52.20 192.40 139.20 52.20 191.40
92 Gangman / Survey / Mazdoor ### 52.20 192.40 139.20 52.20 191.40
93 Wood Sawer (with tools) ### 52.20 192.40 139.20 52.20 191.40
Equivalent
94 Compounder / Pharmasist ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
95 Compounder (SSLC) ### 52.20 192.40 139.20 52.20 191.40
Cadre
96 School Bus Conductor ### 52.20 192.40 139.20 52.20 191.40
Equivalent
97 I.B. Maity ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
98 I.B. Waterman ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
99 Photographer ### 52.20 192.40 139.20 52.20 191.40
Cadre
100 Dhobi ### 52.20 192.40 139.20 52.20 191.40
Equivalent
101 Artisan Chistler ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
102 Artisan Mason ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
103 Artisan Helper ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
104 Artisan fitter ### 52.20 192.40 139.20 52.20 191.40
Cadre
Statement showing the labour rates,
KPW & IWTD mysore circle for the year 2013-14
Annexure - 1
(For Payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
Equivalent
111 Engineering Degree Final Year ### 52.20 192.40 139.20 52.20 191.40
Cadre
course completed
Equivalent
112 Engineering Diploma Final Year ### 52.20 192.40 139.20 52.20 191.40
Cadre
course completed
113 Electrician or Lineman with ### 52.20 197.40 142.20 52.20 194.40
wireman permit
114 Foreman - heavy machiner work ### 52.20 197.40 142.20 52.20 194.40
shop (General)
115 Fabricator
Field Asst. spraying attender, ### 52.20 197.40 142.20 52.20 194.40
Equivalent
116 Plant ### 52.20 192.40 139.20 52.20 191.40
Cadre
propagators, Prunders with
Horticulture Dept, certificate
117 Mali (Gardner) trained ### 52.20 192.40 139.20 52.20 191.40
Equivalent
118 Mali (Gardner) untrained heavy ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
119 Mali (Gardner) Untrained light ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
120 Literate Assistant (Graduate) ### 52.20 197.40 142.20 52.20 194.40
Cadre
Equivalent
121 Literate Assistant (SSLC passed) ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
122 Literate Assistant (Non SSLC) ### 52.20 192.40 139.20 52.20 191.40
Cadre
123 Hammer Mazdoor ### 52.20 197.40 142.20 52.20 194.40
Equivalent
124 Helper (Electrical) ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
125 Medicine sprayer - Malnad ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
126 Medicine sprayer - Maiden ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
127 Jack Hammer Driller ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
128 Laboratory Assit. (Graduate) ### 52.20 197.40 142.20 52.20 194.40
Cadre
Equivalent
129 Laboratory Asst. (SSLC Passed) ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
130 Mechanic Class I ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
131 Mechanic Class II ### 52.20 192.40 139.20 52.20 191.40
Cadre
132 Operator for pump compressor ### 52.20 192.40 139.20 52.20 191.40
Mixer without ITI
Equivalent
133 Drilling mechanic Grade I ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
134 Drilling mechanic Grade II ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
135 Revenue Surveyor ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
136 Gate Operator Grade I ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
137 Gate Operator Grade II ### 52.20 192.40 139.20 52.20 191.40
Cadre
Statement showing the labour rates,
KPW & IWTD mysore circle for the year 2013-14
Annexure - 1
(For Payment of wages of daily wage employees & For adoption in data rates and preparation of SR)
Equivalent
145 Turner with ITI Cerficate Gr. II ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
146 Valveman ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
147 Welder Grade I ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
148 Welder Grade II ### 52.20 192.40 139.20 52.20 191.40
Cadre
149 Work
Inspector / Maistry / Supervisor
Equivalent
150 -do- Graduate ### 52.20 197.40 142.20 52.20 194.40
Cadre
Equivalent
151 -do- SSLC passed ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
152 -do- non SSLC ### 52.20 192.40 139.20 52.20 191.40
Cadre
Equivalent
153 Electrical Inspector with ### 52.20 192.40 139.20 52.20 191.40
Cadre
Supervisor with 5 years
experience
154 Driver for Rig / Night
Ex-Serviceman ### 52.20 197.40 142.20 52.20 194.40
Equivalent
155 Watchman ### 52.20 193.38 139.61 52.20 191.81
Cadre
156 Ballower ### 52.20 193.38 139.61 52.20 191.81
Equivalent
157 Chinnadika Cooli ### 52.20 192.40 139.20 52.20 191.40
Cadre
158 Saranga / Khasari ### 52.20 197.40 142.20 52.20 194.40
Rate
Sl. No. Description Unit
Rs. Ps.
Mortar
Rate
Sl. No. Description Unit
Rs. Ps.
1.14 KSRB 0.5-3.3 : - do - lime surkhi mortar of mix 1:3 (1 lime putty : 3 surkhi) cum 2,123.50
1.15 KSRB 0.5-4.1 : Providing lime surkhi sand mortar of mix 1:1:1 (1 lime putty : cum 3,015.00
1 surkhi : 1 sand) including cost of all materials, labour charges, HOM of
machinery complete as per specifications.
Specification No.KBS
1.16 KSRB 0.5-4.2 : - do - lime surkhi sand mortar of mix 1:1:2 (1 lime putty : 1 cum 2,367.50
surkhi : 2 sand)
1.17 KSRB 0.5-5.1 : Providing cement mortar with stone dust of mix 1:2 (1 cum 6,235.00
cement : 2 stone dust) including cost of all materials, labour charges, HOM of
machinery complete as per specifications.
Specification No.KBS
1.18 KSRB 0.5-6.1 : Providing cement lime mortar of mix 1:1:3 (1 cement : 1 lime cum 6,347.50
putty : 3 sand) including cost of all materials, labour charges, HOM of
machinery complete as per specifications.
Specification No.KBS 0.5-2.3
1.19 KSRB 0.5-6.2 : - do - cement lime mortar of mix 1:1:4 (1 cement : 1 lime cum 6,453.00
putty : 4 sand)
1.2 KSRB 0.5-6.3 : - do - cement lime mortar of mix 1:1:5 (1 cement : 1 lime cum 5,659.00
putty : 5 sand)
1.21 KSRB 0.5-6.4 : - do - cement lime mortar of mix 1:1:6 (1 cement : 1 lime cum 5,014.00
putty : 6 sand)
1.22 KSRB 0.5-6.5 : - do - cement lime mortar of mix 1:1:7 (1 cement : 1 lime cum 4,668.00
putty : 7 sand)
1.23 KSRB 0.5-6.6 : - do - cement lime mortar of mix 1:1:8 (1 cement : 1 lime cum 4,342.00
putty : 8 sand)
1.24 KSRB 0.5-6.7 : - do - cement lime mortar of mix 1:2:9 (1 cement : 2 lime cum 4,532.00
putty : 9 sand)
Rate
Sl. No. Description Unit
Rs. Ps.
1.25 KSRB 0.5-6.8 : - do - cement lime mortar of mix 1:3:12 (1 cement : 3 lime cum 4,297.50
putty : 12 sand)
1.26 KSRB 0.5-7.1 : Providing white cement mortar with marble dust of mix 1:2(1 cum 16,079.00
white cement : 2 marble dust) including cost of all materials, labour charges,
HOM of machinery complete as per specifications.
Specification No.KBS
1.27 KSRB 0.5-7.2 : - do - white cement mortar with marble dust of mix 1:3 (1 cum 12,495.00
white cement : 3 marble dust)
1.28 KSRB 0.5-7.3 : - do - white cement mortar with marble dust of mix 1:4 (1 cum 9,659.00
white cement : 4 marble dust)
1.29 KSRB 0.5-7.4 : - do - white cement mortar with marble dust of mix 1:5 (1 cum 8,132.00
white cement : 5 marble dust)
1.3 KSRB 0.5-8.1 : Providing fly ash sand mortar of mix 1:1.5:3(1 white cement : cum 4,194.00
1.5 fly ash : 3 sand) including cost of all materials, labour charges, HOM of
machinery complete as per specifications.
Specification No.KBS 0.5-2.4
1.31 KSRB 0.5-8.2 : - do - fly ash sand mortar of mix 1:2:4 (1 cement : 2 fly ash : 4 cum 3,452.00
sand)
1.32 KSRB 0.5-8.3 : - do - fly ash sand mortar of mix 1:2.5:5 (1 cement: 2.5 fly ash : cum 3,040.00
5 sand)
1.33 KSRB 0.5-8.4 : - do - fly ash sand mortar of mix 1:3:6.5 (1 cement: 3 fly ash : cum 2,711.00
6.5 sand)
1.34 Mud mortar cum 100.00
Rate
Sl. No. Description Unit
Rs. Ps.
Earthwork for
Buildings
Rate
Sl. No. Description Unit
Rs. Ps.
2.11 KSRB 2.4 : Rifilling available earth around pipe lines cables in layers not cum 56.8
exceeding 20 cms. in depth, compacting each deposited layer by ramming
after watering with lead upto 50m. and lift upto 1.5m. including cost of all
labour complete as per specifications.
2.12 KSRB 2.5 : Earthwork excavation(in deposited soil) and filling sides of cum 189.35
foundation upto plinth in layers not exceeding 20 cms. in depth, compacting
each deposited layer by ramming after watering with all lead lift including
cost of all labour complete as per specifications.
Note :
KSRB 2.2
1 Excavation for foundation of buildings, water supply, sanitary lines,
electrical conduits either in pits or in trenches where excavation width is
above 600 mm below 1.5 mts. add 25% extra and for width upto 600 mm add
50% extra for respective rates due to restricted conditions.
KSRB 2-2
Extra for excavation under water conditions and/or foul conditions
including balling/pumping out, removing slush add 20% of the rate of the
respective rate on account of slow progress of work under these conditions.
Rate
Sl. No. Description Unit
Rs. Ps.
Anti Termite
Treatment
Rate
Sl. No. Description Unit
Rs. Ps.
Specification No.KBS
3.6 KSRB-3.6 : Providing, injecting chemical emulsion for Pre-constructional m 64.4
Anti-Termite Treatment of existing masonry using chemical emulsion at one
litre / hole at 300mm intervals incluing drilling of holes at 45 degree and
plugging them with cement mortar 1:2 to the full depth of the hole with
Chloropyriphos emulsifiable concentration 20% including cost of chemical
diluting in water to one percent concentration, labour, HOM equipments,
complete as per specifications.
Cement Concrete
Rate
Sl. No. Description Unit
Rs. Ps.
4.8 KSRB-4-1.8 : Extra for laying cement concrete under water including cost of cum 76
pumping or dewatering and clearing slush as per specifications Details cost
for depth of water 0.3 metres bailing out.
Specification No. KBS 4.2, 4.8
4.9 KSRB 4-1.9 : Extra for laying cement concrete under foul conditions. cum 103
Specification No. KBS
4.10 KSRB 4.2.1: Providing and laying in position reinforced cement concrete of cum 5,300.00
design mix M25 with OPC cement @ 340 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.70cum and fine aggregates @
0.47cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for all works in foundation plinth and ground floor level
for roof slabs, staircase, lintles, retaining walls, return walls, walls (any
thickness) including attached plasters, columns, piers, abutments, pillars,
posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks,
anchor blocks, plain window cills, fillets etc., including cost of all materials,
labour, HOM of machinery, curing, complete as per specifications. (Excluding
cost of steel fabrication & plastering charges) Specification No. KBS4.1, 4.6
Rate
Sl. No. Description Unit
Rs. Ps.
4.11 KSRB 4.2.2: Providing and laying in position reinforced cement concrete of cum 4,566.00
design mix M20 with OPC cement @ 320 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.878cum and fine aggregates @
0.459cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for all works in foundation plinth and ground floor level
for roof slabs, staircase, lintles, retaining walls, return walls, walls (any
thickness) including attached plasters, columns, piers, abutments, pillars,
posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks,
anchor blocks, plain window cills, fillets etc., including cost of all all
materials, labour, HOM of machinery, curing, complete as per specifications.
(Excluding cost of steel fabrication & plastering charges) Specification No.
KBS 4.1, 4.6
4.12 KSRB 4.2.3: Providing and laying in position reinforced cement concrete of cum 5,494.00
design mix M15 with OPC cement @ 240 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.878cum and fine aggregates @
0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in foundation plinth and ground floor level for roof
slabs, staircase, lintles, retaining walls, return walls, walls (any thickness)
including attached plasters, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window cills, fillets etc., including cost of all all materials,
labour, HOM of machinery, curing, complete as per specifications. (Excluding
cost of steel fabrication & plastering charges) Specification No. KBS 4.1, 4.6
4.13 KSRB 4.2.4: Providing and laying in position reinforced cement concrete of cum 4,423.00
design mix M10 with OPC cement @ 220 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.792cum and fine aggregates @
0.465cum, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in foundation plinth and ground floor level for roof
slabs, staircase, lintles, retaining walls, return walls, walls (any thickness)
including attached plasters, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window cills, fillets etc., including cost of all all materials,
labour, HOM of machinery, curing, complete as per specifications. (Excluding
cost of steel fabrication & plastering charges) Specification No. KBS 4.1, 4.6
4.14 KSRB 4.2.5: Providing and laying in position reinforced cement concrete of cum 4,470.00
design mix M15 with OPC cement @ 240 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.878cum and fine aggregates @
0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in foundation plinth and ground floor level for roof
slabs, staircase, lintles, retaining walls, return walls, walls (any thickness)
including attached plasters, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window cills, fillets etc., including cost of all materials, labour,
HOM of machinery, curing, complete as per specifications. (Excluding cost of
steel fabrication & plastering charges) Specification No. KBS 4.1, 4.6
Rate
Sl. No. Description Unit
Rs. Ps.
4.15 KSRB 4.2.6: Providing and laying in position reinforced cement concrete of cum 4,300.00
design mix M10 with OPC cement @ 220 kgs, with 40mm and down size
graded granite metal coarse aggregates @ 0.892cum and fine aggregates @
0.465cum, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in foundation plinth and ground floor level for
retaining walls, return walls, walls (any thickness) including attached
plasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or
lacing courses, parapets, coping, bed blocks, anchor blocks, plain window
cills, fillets etc., including cost of all materials, labour, HOM of machinery,
curing, complete as per specifications. (Excluding cost of steel, fabrication &
plastering charges) Specification No. KBS 4.1, 4.6
4.16 KSRB 4.2.7: Providing and laying in position reinforced cement concrete of cum 5,494.00
design mix M25 with OPC cement @ 340 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.70cum and fine aggregates @
0.47cum, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for R.C.C. beams, columns of all sizes in foundation plinth and
superstructure ground floor level for roof slabs, staircase, lintles, columns,
including cost of all materials, labour, HOM of machinery, curing, complete
as per specifications. (Excluding cost of steel, fabrication & plastering
charges) Specification No. KBS 4.1, 4.6
4.17 KSRB 4.2.8: Providing and laying in position reinforced cement concrete of cum 5,300.00
design mix M20 with OPC cement @ 320 kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.69cum and fine aggregates @
0.46cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for R.C.C. beams, columns of all sizes in foundation plinth
and superstructure ground floor level for roof slabs, staircase, lintles,
columns, including cost of all materials, labour, HOM of machinery, curing,
complete as per specifications. (Excluding cost of steel, fabrication &
plastering charges)
4.18 KSRB 4.2.9: Providing and laying in position reinforced cement concrete of cum 4,566.00
mix M15 with OPC cement @ 240 kgs, with 20mm and down size graded
granite metal coarse aggregates @ 0.878cum and fine aggregates @
0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for R.C.C. beams, columns of all sizes in foundation plinth and
superstructure ground floor level for roof slabs, staircase, lintles, columns,
including cost of all materials, labour, HOM of machinery, curing, complete
as per specifications. (Excluding cost of steel, fabrication & plastering
charges)
4.26 KSRB 4-4.3: Extra for use of water proofing compound in Cement concrete of cum 151
mix M15, at one kg of compound per bag of cement.
Specification No. KBS
4.27 KSRB 4-4.5: Providing lath plaster with cement mortar 1:3, 5cms thick with sqm 851.65
6mm dia mild steel bars at 20 cms, c to c both horizontally and vertically
fixing chicken mesh for drop chajja, facia, backing to cup boards including
cost of all materials, labour, providing and removing form work HOM of
machineries, curing, complete as per specifications. (Excluding finishing)
SpecificationNo. KBS
4.28 KSRB 4-6.1: Providing and removing centering, shuttering, strutting, sqm 209.25
propping etc., and removal of form work for foundations,footings, bases of
columns for mass concrete including cost of all materials, labour complete
as per specifications. SpecificationNo. KBS 4.6.2
4.29 KSRB 4-6.2: Providing and removing centering, shuttering, strutting, sqm 268.9
propping etc., and removal of form work for flat surface such as suspended
floors, roofs, landings, balconies and likes, thickness upto 200 mm including
cost of all materials, labour complete as per specifications.
4.33 KSRB 4-6.6: Providing and removing centering, shuttering, strutting, sqm 790.00
propping etc., and removal of form of work for columns, pillars, piers, post
and struts, circular or curved in plan including cost of all materials, labour
complete as per specifications.
specification No.KBS
4.43.2 KSRB 4-7 : Scaffolding for stone massonry as in sr no. 4.43 converted to cum. cum 192.10
4.43.3 KSRB 4-7 : Scaffolding for stone massonry work as in sr no. 4.43 converted to sqm 75.00
sqm.
4.444 KSRB 4-8: Providing 2 legged scaffolding for brick masonary work using 10-
15 cms, dia best quality Casurina poles of 4m over all length (3m + 0.5m
projection + 0.5m In to the ground), the distance between two rows being
1.25m and spacing of posts being 2m in both rows with 2 horizontal posts
with 0.5 mm overlap on either side and braces at 2m c to c including
longitudinal and transveres middle braces to step up and providing platform
with casurina poles, forms tied up using coir rope complete as per
specifications.
specification No.KBS
4.46 KSRB 4.9.2: Providing T.M.T. steel reinforcement for R.C.C. work including
straightening cutting, bending, hooking, placing in position, lapping and (or
welding wherever required, trying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
and wastage shall not be measured and paid) cost of materials, labour, HOM
of machinery complete as per specifications.
Specification No. KBS 4.6.3
4.48.1 Ready mixed Cement concrete M-20 for raft foundation, column footing, cum 4988.00
main and secondary beams.
4.49 Providing and laying cement concrete using 20 mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for R.C.C.
works laid in 15 cms thick layers and well compacted including vibrating,
curing etc., including smooth finish in CM 1:3, with all lead and lift etc.,
complete. (exclusive of cost of steel and fabrication charges)
4.49.1 -do- Ready mixed Cement concrete for Beams, Columns, Staircase and Roof cum 5986.00
with M-20 (Cement-320 Kg/cum)
4.49.2 -do- Ready mixed Cement concrete for Beams, Columns, Staircase and Roof cum 5989.00
with M-25 (Cement-340 Kg/cum)
4.49.3 -do- Ready mixed Cement concrete for Beams, Columns, Staircase and Roof cum 6289.00
with M-30 (Cement-360 Kg/cum)
4.49.4 -do- Ready mixed Cement concrete for Beams, Columns, Staircase and Roof cum 6532.00
with M-35 (Cement-390 Kg/cum)
4.49.5 -do- Ready mixed Cement concrete for Beams, Columns, Staircase and Roof cum 6774.00
with M-40 (Cement-420 Kg/cum)
4.5 Providing and mixing synthetic fibers 100% virgin triangular monofilament
polyester fibers, 12mm in cut length for use as secondary fibre reinforcement
in concrete works. Application per cubic meter shall be 125 grams per bag of
cement or 0.25% by weight of cement.
4.52 Providing and mixing fibermesh stealth e3 Fibermesh 150 multi dimensiional Kgs 395.00
graded multifilament 100% virgin polypropylene fibres contains no
reprocessed olfrin materials and are specifically manufactured for use as
concrete secondary reinforcement. Application per cubic meter shall be @
0.9kg to 1.8kg per cum of concrete. Fibermesh stealth e3 shall confirm to
ASTM C 1116 type 111.4.106.
Rate
Sl. No. Description Unit
Rs. Ps.
4.53 Providing and casting reinforced cement concrete racks with design mix Sqm 693.03
M20, granite or trap jelly 12mm and down size 5 cms thick and below with
reinforcements of 6mm dia MS bars at 15 cms. Centre to centre for main
reinforcement at 30 cms centre to centre for distibution including supports
wherever necessary with burnt brick in CM 1:8 and plastered with CM 1:4 or
composite mortar 1:6 including centring, form work, curing etc., complete
(including of cost of steel and fabrication charges).
4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 Sqm 395.00
using clean granite or trap jelly of 20mm and down size with necessary form
work, centring, curing, finishing the exposed faces with cement mortar (1:3)
etc., complete (exclusive of cost of steel and fabrication charges).
4.55 Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and Sqm 604.00
down size jelly cement concrete design mix M20 including CM 1:3 plaster
finishing, curing etc., complete (excluding the cost of steel and fabrication
charges).
4.56 Providing RCC design mix M20 using granite 20mm and down size for 7.5cms
thick solid parapet or perforated as per design, specification and directions.
(exclusive of cost of steel and fabrication charges) including necessary
centering, form work and finishing smooth with CM (1:3) etc., complete.
Note:
Concrete mix proportioning
1 IS 456-2000 has recommended that minimum grade of concrete shall not be
less than M20 in reinforced concrete work. Design mix concrete is preferred
to nominal mix. If design mix concrete cannot be used for any reason on the
work for grades M20 or lower, nominal mixes may be used with permission
of Engineer-in-charge, which however is likely to involve higher cement
content. Accordingly all concrete above M20 grade for RCC work must be
design mixes.
Proporations for nominal mix concrete (Kg per cubic metre of concrete)
cement constants for concrete grade m20 and above (for opc 43/53 grade cements)
Rate
Sl. No. Description Unit
Rs. Ps.
4 The rates for the items under Sl.No. 4.48.1, 4.49.1, 4.49.2, 4.50, 4.51, 4.52,
4.52.1, 4.52.2, 4.53 & 4.54 are for ground floor and is applicable for all
additional floors.
7 Lift charges : An additional rate of Rs.50,00/cum per floor may be added for
every additional floor for items Sl.No.4.1 to 4.18 and Rs.3.00/-sqm per floor
may be added for every additional floor for items under Sl.No.4.19, 4.20, 4.27,
4.55, 4.56, 4.57, 4.58.1, 4.58.2, 4.28 to 4.42. For 4.43 to 4.44.4 an additional
rate of Rs.3/floor may be added.
8 Centering height of 3.5 meters is considered for item No.4.28, 4.30 to 4.44.4.
An additional rate Rs.20 shall be added for every additional meter or part
thereof for the above limits.
10 The difference in cost of cement for RMC items shall be effected for every
price revision of cement.
11 RMC : While using RMC, taking out the sample at worksite is mandotory for
conducting necessary tests. It is the responsibility of the contractor to assure
and ensure quality of RMC at the work spot as per design mix for which
Executive Engineer shall obtain necessary test certificates as per IS
Standards.
12 TMT Steel : For Major works suchas RCC framed structures, bridges,
retaining walls, the contractor shall purchase the TMT STEEL manufactured
by the Primary plants (TMT Steel from iron ore) or from their authorized
dealers and necessary physical tests for the TMT Steel so procured shall be
conducted.
For remaining RCC works,TMT Steel shall also be procured from secondary
plants for which necessary certificates shall be insisted from the
manufacturers that their plant is fitted with Ladle furnace and necessary
physical tests for the TMT Steel shall be conducted.
For re-rolled TMT Steel - both physical and chemical tests conforming IS
1786 / IS 2830 shall be conducted before its usage.
In road works only Round TMT bars shall be used for dowel bars.
For lapping steel reinforcement, preferably 25mm and above, only welding
splices shall be done.
Rate
Sl. No. Description Unit
Rs. Ps.
Stone Work
Rate
Sl. No. Description Unit
Rs. Ps.
5 STONE WORK
5.1 KSRB-5.1.1: Providing and constructing granite / trap / basalt rubble stone cum 1277.00
masonry in foundation with mud mortar (uncoursed), bond stones at two m.
apart in each course including cost of materials, labour, curing complete as
per specifications.
KBS 5.1.12
5.2 KSRB-5.1.2: Providing and constructing granite / trap / basalt rubble stone cum 2370.00
masonry in foundation with cement mortar 1:8 (uncoursed), bond stones at
two m. apart in each course including cost of materials, labour, curing
complete as per specifications.
KBS 5.1.12
5.3 KSRB-5.1.3: Providing and constructing granite / trap / basalt rubble stone cum 2537.00
masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at
two m. apart in each course including cost of materials, labour, curing
complete as per specifications.
KBS 5.1.12
5.4 KSRB-5.2-1: Providing and constructing granite / trap / basalt size stone cum 2236.00
masonry in foundation with mud mortar, stone hammerd dressed in courses
not less than 20 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications.
KBS 5.1.12
5.5 KSRB-5.2-2: Providing and constructing granite / trap / basalt size stone cum 3163.00
masonry in foundation with cement mortar 1:8, stone hammerd dressed in
courses not less than 20 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications.
KBS 5.1.13
5.6 KSRB-5.2-3: Providing and constructing granite / trap / basalt size stone cum 3305.00
masonry in foundation with cement mortar 1:6, stone hammerd dressed in
courses not less than 20 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications.
KBS 5.1.13
5.7 KSRB-5.3-1: Providing and constructing granite / trap / basalt size stone cum 2862.50
masonry in basement with mud mortar edges of stones chistle dressed in
courses not less than 15 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications.
KBS 5.1.13
5.8 KSRB-5.3-2: Providing and constructing granite / trap / basalt size stone cum 3789.60
masonry in basement with cement mortar 1:8, edges of stones chistle dressed
in courses not less than 15 cms high, bond stones at two m. apart in each
course including cost of materials, labour, curing complete as per
specifications.
KBS 5.1.13
Rate
Sl. No. Description Unit
Rs. Ps.
5.9 KSRB-5.3-3: Providing and constructing granite / trap / basalt size stone cum 3931.00
masonry in basement with cement mortar 1:6, edges of stones chistle dressed
in courses not less than 15 cms high, bond stones at two m. apart in each
course including cost of materials, labour, curing complete as per
specifications.
KBS 5.1.13
5.10 KSRB-5.4-1: Providing and constructing granite / trap / basalt size stone cum 3045.00
masonry in superstructure with cement mortar 1:6, edges of stones chistle
dressed in courses not less than 15 cms high, bond stones at two m. apart in
each course including cost of materials, labour, scaffolding, curing complete
as per specifications.
KBS 5.1.13
5.11 KSRB-5.4-2: Providing and constructing granite / trap / basalt size stone cum 3972.00
masonry in superstructure with cement mortar 1:8, edges of stones chistle
dressed in courses not less than 15 cms high, bond stones at two m. apart in
each course including cost of materials, labour, scaffolding, curing complete
as per specifications.
KBS 5.1.13
5.12 KSRB-5.4-3: Providing and constructing granite / trap / basalt size stone cum 4114.00
masonry in superstructure with cement mortar 1:6, edges of stones chistle
dressed in courses not less than 15 cms high, bond stones at two m. apart in
each course including cost of materials, labour, scaffolding, curing complete
as per specifications.
KBS 5.1.13
5.13 KSRB-5.4-4: Providing and constructing granite / trap / basalt size stone cum 4421.00
masonry in superstructure with cement mortar 1:4, edges of stones chistle
dressed in courses not less than 15 cms high, bond stones at two m. apart in
each course including cost of materials, labour, scaffolding, curing complete
as per specifications.
KBS 5.1.13
5.14 KSRB-5-5: Extra lift charges for size stone masonry above ground floor for cum 144.70
every additional floor.
KBS 5.1.13
5.15 KSRB-5-6: Extra for constructing stone masonry in square or rectangular cum 223.60
pillars complete as per specifications.
KBS 5.1.13
5.16 KSRB-5-7: Extra for constructing masonry in circular pillars including cum 520.00
rectangular pillars complete as per specifications.
KBS 5.1.13
5.17 KSRB-5-8.1: Providing one line dressing to granite stone slab / granite stone cum 406.00
masonry as per specifications.
KBS 5.1.13
5.18 KSRB-5-8.2: Providing two line dressing to granite stone slab / granite stone sqm 677.00
masonry as per specifications.
KBS 5.1.13
5.19 KSRB-5-8.3: Providing three line dressing to granite stone slab / granite sqm 947.45
stone masonry as per specifications.
KBS 5.1.13
5.20 KSRB-5-8.4: Providing pulmane finish only on three line dressed surface as sqm 267.6
per specifications.
KBS 5.1.13
5.21 KSRB-5-8.5: Providing quoin dressing to stone masonry and stone slabs, two m 67.70
line 5 cms wide on each face as per specifications.(measurement including
mortar joints)
KBS 5.1.13
5.22 KSRB-5-9: Providing chamfering edges to stone slab 2.5 cms wide as per m 26.3
specifications.(only chamfered length shall be recorded)
Rate
Sl. No. Description Unit
Rs. Ps.
KBS 5.1.13
5.23 KSRB-5-10: Providing hammer dressing to size stones as per specifications. No. 4.8
KBS 5.1.13.3
5.24 KSRB-5-11: Providing and constructing load bearing wall with cement sqm 758.2
concrete cavities blocks (hollow blocks) of proportion 1:5:3 blocks of size
40x20x20 cms. (lxbxh) strength not less than 50 kg. per sqm with cement
mortar 1:4 conforming to I.S 2185 of 1967 having not less than 40 mm. shell
thickness with two or more large cavities and having solid material between
including cost of materials, labour charges, scaffolding, curing complete as
per specifications.
KBS 5.4
5.25 KSRB-5-12: Providing and constructing load bearing wall with cement sqm 751.80
concrete cavities blocks (hollow blocks) of proportion 1:5:3 blocks of size
40x20x20 cms. (lxbxh) strength not less than 35 kg. per sqm with cement
mortar 1:4 conforming to I.S 2185 of 1965 having not less than 40 mm. shell
thickness with two or more large cavities and having solid material between
including cost of materials, labour charges, scaffolding, curing complete as
per specifications.
5.26 KSRB-5-13: Providing and constructing non-load bearing wall with cement sqm 599.50
concrete cavities blocks (hollow blocks) of proportion 1:5:3 blocks of size
40x10x20 cms. (lxbxh) strength not less than 35 kg. per sqm with cement
mortar 1:4 conforming to I.S 2185 of 1967 having not less than 40 mm. shell
thickness 50% of total volume of block having two large cavities with 20mm,
wall thickness in between including cost of materials, labour charges,
scaffolding, curing complete as per specifications.
5.27 KSRB-5-14: Providing and constructing precast concrete solid blocks with sqm 858.00
compressive strength not less than 35 kg/sqm with cement mortar 1:4
masonry (quoin, Jamb, closer blocks) with solid concrete blocks of size
40x20x20 cms. conforming to I.S 2185 of 1965 in superstructure including
cost of materials, labour charges, scaffolding, curing complete as per
specifications.
5.28 KSRB-5-15: Providing and constructing non-load bearing wall with cement Sqm 614.80
concrete solid blocks with compressive strength not less than 35 kgs/sqm
with cement mortar 1:4 (Jamb, closer blocks) with blocks of size 40x10x20
cms. (lxbxh) conforming to I.S.2185/1965 in superstructure including cost of
materials, labour charges, scaffolding, curing complete as per specifications.
5.29 Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4
and finished with CM 1:3 plastering and finishing cutting etc., complete.
5.33 Refixing stone slabs of drains and pointing in C.M. (1:3). Sqm 66.1
Rate
Sl. No. Description Unit
Rs. Ps.
Brick Work
Rate
Sl. No. Description Unit
Rs. Ps.
6.10 KSRB-6.3.3: Providing and constructing burnt brick masonry with approved cum 8740.00
quality of class non-modular bricks of standard size of class designation 75
with cement mortar 1:4 for basement and superstructure(Machine moulded
Wirecut bricks) with cost of materials, labour charges, scafflolding, curing
complete as per specifications.
6.13 KSRB-6.4.2: Providing and constructing burnt brick masonry with approved cum 5,051.00
quality of modular bricks ground moulded of standard size of class
designation 35 with cement mortar 1:8 for basement and superstructure
with cost of materials, labour charges, scafflolding, curing complete as per
specifications.
6.19 KSRB-6.6.1: Providing and constructing burnt brick masonry with approved cum 7,915.00
quality of modular bricks of standard size of class designation 75 (Machine
moulded Wirecut bricks) with cement mortar 1:8 for basement and
superstructure cost of materials, labour charges, scafflolding, curing
complete as per specifications.
6.20 KSRB-6.6.2: Providing and constructing burnt brick masonry with approved cum 8,021.00
quality of modular bricks of standard size of class designation 75 (Machine
moulded Wirecut bricks) with cement mortar 1:6 for basement and
superstructure cost of materials, labour charges, scafflolding, curing
complete as per specifications.
6.28 KSRB-6.8.2: Construction of partition wall 10 cms thick with table moulded Sqm 723.1
modular burnt bricks of class designation 50 with cement mortar 1:4
including providing and fixing plaster mesh manufactured out of hot dipped
gelvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per I.S.
2212/1991 at 7.5m. c to c including cost of materials, labour charges,
scafflolding, curing complete as per specifications.
6.32 Providing and constructing non load bearing wall with Light weight Sqmt 1,450.00
Concrete (Autoclaved aereated cellular) Blocks of size 60 x 20 x15 cm with
CM 1:4 for super structure with necessary scaffolding, curing complete.
Rate
Sl. No. Description Unit
Rs. Ps.
Note:
4 Lift charges : The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.25.00/cum and Rs.2.50/sqm per
floor may be added for every additional floor. Same lift charges shall be
adopted for concrete blocks.
Steel and
Steel and
Rate
Sl. No. Description Unit
Rs. Ps.
Alluminium Work
7.7 KSRB-7.7: Providing and fixing in position in cement concrete 1:3:6 steel m 3,442.00
glazed windows and ventilatos side hung/top hung fully openable as per
approved drawing using Z angles of 25x33x3mm. weighing 1.419 Kg/m both
for outer and inner frames and central mullion section of size 25x46x3mm.
weighing 2.28Kg/m duly providing T section 19x19x3mm weighing 0.839
Kg/m for glazing of windows not more than 34 cms. c to c including
providing and fixing 4mm. thick reeded glass with teakwood beading of
required size, all steel sections should confirm to I.S. 7452:1990, 4nos. of
holdfasts of approved size,section should be cut to length welded and
electrically grinded subdividing frames of unit shall be tenonned and
revetted into the frames electrically. All the steel surface shall be throughly
cleaned free of rust and painted with one coat of anti-corosive paint and
finishing with two coats of ready mix paint of approved colour and make
including cost of materials, fixtures, labour and HOM of machinery complete
as per specifications.
7.9 KSRB-7.9: Providing and fixing M.S. grill work for windows and ventilatos Kgs 89.7
weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of
M.S. flats and square rods as per approved design, drawing including cutting
steel sections and welding the same to required plattern with a coat of red
lead primer, cost of materials, fixtures, labour and HOM of machinery
complete as per specifications.
7.10.1 -do- using aluminium section anodized to 12-15 microns. Sqm 3,516.00
7.10.2 -do- using aluminium section powdered coated to a minimum of 60-70 Sqm 3,616.00
microns with exterior durable pure polyester grade powder of approved
quality.
Rate
Sl. No. Description Unit
Rs. Ps.
7.11 KSRB 7.11: Providing and fixing in position aluminium windows and
ventilators as per approved drawing with sliding shutters using three track
window frame of size 92x31.75mm. bottom section 1.3mm thick, weight 1.07
Kg/m, sides and top sections 1.3 mm. thick weight 0.933 kg/m; shutter frame
section comprising top and bottom section of size 40mmx18mm, wall
thickness 1.25mm, weight 0.417 kg./m; shutter interlock section
40mmx26.7mm. wall thickness 1.1mm. thick, weight 0.469 kg/m. the shutters
mounted on nylon rollers with approved quality of fixtures such as
aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain
grass for shutters fitted with rubber beading all aluminium sections
including cutting to required length, joints mitred subdiving the frame
tenonned and rivetted, in the assembled frame, stiffened with end clips for
corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the
case may be with necessary steel screws, raul plugs or teak wood gatties
including cutting masonry or concrete and making good the original surface
using cement mortar.
7.13.1 -do- using aluminium section anodized to 12 -15 micrones. Sqm 4,187.00
7.13.2 do- using aluminium section powdered coated to a minimum of 60-70 Sqm 4,286.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.14 KSRB 7.14 : Providing, fabricating, assembling and fixing in position
aluminium partition using sections in combination of plain, single grove and
double grove as per requirements for the frames of overall size 101.6 mm x
44.45 mm, 3.18 mm. thick having section weight, plain sections 2.40kg/m
single grove section 2.541 kg/m, and doubled grove section 2.683 kg/m and
bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick
section weight 0.43kg/m; bottom portions proved with 12mm. thick
prelaminated sheet both side of approved colour lamination exterior grade;
aluminium sections of mat finish or glossy finish using section, spacing of
vertical member shall not exceed 0.6m c to c; sections are cut to the required
lengths, joints mitered and corners grinded subdividing frames tennoned and
rivetted to the frames, the assembled frame should be shiffened with corner
angles stripped and fixed with screws, rawl plugs and teak wood gutties to
R.C.C. columns or masonry on sides, R.C.C. linteles or beams at top and floor
at bottom, including cutting chistling and making good with cement mortar
to match the surface, providing and fixing bottom panel filled with the
materials to a height of 0.9m. floor level; and 5.5mm. thick plain glass for
middle portion viz., 0.9m to 2.13 m. and top panel with lower sections, the
glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of
0.9mm. weight 0.124kg/m; aluminum sections pre-treated for removal of
7.14.1 any
-do- rust
usingand prevention
aluminium of further
section rusttoinformation,
anodized and coated with greasy
12 -15 micrones. Sqm 4,385.00
7.14.2 do- using aluminium section powdered coated to a minimum of 60-70 Sqm 4,485.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.15 KSRB 7.15 : Providing, fabricating, assembling and fixing in position
aluminium partition using sections of mat finish or glassy finish in
combination of plain grove, single grove and double grove as per
requirements for the frames of overall size 63.5mm x 38.1 mm with thickness
of 2 mm. having section weight, plain sections 1.054kg/m single grove
thickness 1.95mm. section weight 1.094 kg/m, doubled grove thickness
1.9mm section weight 1.094 kg/m and bottom member 114.3 mm x44.45mm.
thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size
36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom
portions provided with 12mm. thick prelaminated sheet both sides of
approved colour lamination exterior grade upto 0.9m height, spacing of
vertical member shall not exceeding 0.6m c to c; sections are cut to the
required lengths, joints mitered and corners grinded subdividing frames
tennoned and rivetted to the frames; the assembled frame stiffened with
corner angles, stripped and fixed with screws, rawl plugs and teak wood
gutties to R.C.C. columns on sides, R.C.C. linteles or beams at top and floor at
bottom, including cutting chistelling and making good with cement mortar
to match the surface; providing and fixing 5.5mm. thick plain glass for
middle portion viz., 0.9m to 2.13 m. and top panel with louvres sections; the
glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of
0.9mm. weight 0.124kg/m; aluminum sections treated for removal of any
rust and prevention of further rust formation, coated with greasy materials
Rate
Sl. No. Description Unit
Rs. Ps.
7.15.1 -do- using aluminium section anodized to 12 -15 micrones. Sqm 2,991.00
7.15.2 do- using aluminium section powdered coated to a minimum of 60-70 Sqm 3,091.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.16 KSRB 7.16 : Providing, fabricating, assembling and fixing in position
aluminium shutters to the existing door frame in the partition using
47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical
frame; 47.62x44.45mm thickness of 3mm, weight 1.42kg/m for top section,
49.91mmx44.45mm with wall thickness 3mm, weight 1.495kg/m for central
rail, and 114.3mmx44.45mm thickness 3.18mm, weight 2.646kg/m for
bottom rail; aluminium sections and cut to length joint metered and corners
grinded, the bottom rail and top rail hingled or pivoted, opening
arrangements including providing and fixing standard accessories, such as
aluminium handles, tower bolts, lock, pivots, hingles P.V.C. or rubber gasket,
12mm prelaminated sheets(Novopan) exterior grade of approved colour
both sides same colour for bottom panel maximum height 0.90m and 5.5mm
thick palin glass for top panel (Novopan) and glass fixed with glazed clips
19mmx17.3mmx11mm. 0.9mm thick, weight 0.124kg/m; aluminium sections
treated for removal of any rust and prevention of further rust formation, and
any coated with greasy materials for non-adherance of mortars or any other
sticky materials, including cost of materials, fixtures, labour and HOM of
machinery complete as per specifications.
7.16.1 -do- using aluminium section anodized to 12 -15 micrones. sqm 3,714.00
7.16.2 do- using aluminium section powdered coated to a minimum of 60-70 sqm 3,814.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.17 KSRB 7.16 : Providing, fabricating, assembling and fixing in position
aluminium doors using following aluminium mat finish or glossy finish, outer
frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404
kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm,
section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.18mm,
setion weight 1.426kg/m, bottom section 114.3x44.45mm thickness 3.00mm,
section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm
section weight 0.124kg/m; aluminium sections cut to length joint metered
corners grinded, the shutters pivoted opening arrangement with heavy duty
aluminium alloy automatic door closures floor mounted, providing and fixing
standard approved accessories, such as aluminium handle for full width or
lengthm tower bolts, lock, pivots; P.V.C. or rubber gasket with 5.5m. thick
plain glass for top and bottom panel; aluminium sections treated for
removal of any rust and prevention of further rust formation, and coated
with greasy materials for non-adherance of mortars or any other sticky
materials; the assembled frame fitted with the corner angles, strips and
fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or
masonry on sides. beams and flooring in bottom, including cutting,
chistelling an making good with cement free from rust, scale, or dirt
including cost of materials, fixtures, labour and HOM of machinery complete
as per specifications.
7.17.1 -do- using aluminium section anodized to 12 -15 micrones. Sqm 5,886.00
7.17.2 do- using aluminium section powdered coated to a minimum of 60-70 Sqm 5,956.00
microns with exterior durable pure polyester grade powder of approved
quality.
Rate
Sl. No. Description Unit
Rs. Ps.
7.18 Providing and fixing of Aluminium composite panel of approved make and Sqm 4,409.00
colour for wall cladding for straight Brick/Rcc/stone stone walls &
coloumns/beams with necessary with necessary aluminium frame works at
required level made out of 50x25x3mm C section or equalent. The panel
should consist of 2.5mm thermoplastic core of antitoxic LDPE sandwiched
between 0.25 skins thick aluminium sheet making a total panel thickness of
3mm. The surfaces will be finished with PVDF based coating on topsides and
service coating on reverse sides would be in polyester paint. The system shall
be fixed using GL brackets, aluminium L Cleats and stainless steel bolts and
nuts complete with spring washer and cap nuts and all other necessary
accessories, sealing shall be done using weather sealant of Dow Corning 789
with necessary rods etc., complete.
7.19 Providing and fixing of Aluminium composite panel of approved make and Sqm 4,951.00
colour for wall cladding for curved Brick/Rcc/stone stone walls &
coloumns/beams with necessary with necessary aluminium frame works at
required level made out of 50x25x3mm C section or equalent. The panel
should consist of 2.5mm thermoplastic core of antitoxic LDPE sandwiched
between 0.25 skins thick aluminium sheet making a total panel thickness of
3mm. The surfaces will be finished with PVDF based coating on topsides and
service coating on reverse sides would be in polyester paint. The system shall
be fixed using GL brackets, aluminium L Cleats and stainless steel bolts and
nuts complete with spring washer and cap nuts and all other necessary
accessories, sealing shall be done using weather sealant necessary rods etc.,
complete.
7.2 Providing, fabricating and fixing of stick type structure glazing using Sqm 5,378.00
Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/mtr for
Vertical and Horizontal members and 63.5 mm x 38.1 x 1.33 mm of 0.759
kg/Mtr.as outer frame with Electro Anodized Paint coated block finishing,
using 6mm thick imported glass reflective hard coated ocean blue raw glass
with all necessary accessories like ultra glass Silicon sealant of Space tape,
Masking tape, Galvanized Anchaor bolt, machine screws, 6mm thick M.S.
angle 50mm x 150mm x 6mm M.S. Galvanized L Brackets, structural sealant
setting clocks, fasteners, wall connection etc., complete.
7.21 Providing fusion bonded epoxy coating not less than 175 microns thickness
and upto 300 microns to reinforcement of all diameters as per IS: 13620-
1993 including testing of coating at plant. The rate is inclusive of cost on
account of careful handling, PVC coated binding wire instead of GL Binding
wire, touch up material supplied by coating agency, repair work, loading,
unloading, and straightening of bent rods etc., complete as per specification
and as directed by the Engineer in charge. (Inclusive of all taxes but
excluding transportation charges)
7.22.1 -do- using aluminium section anodized to 12 -15 micrones. Sqm 2,900.00
7.22.2 do- using aluminium section powdered coated to a minimum of 60-70 Sqm 3,000.00
microns with exterior durable pure polyester grade powder of approved
quality.
7.23 Providing and fixing door frame with or without ventilator made out of cold Sqm 2,200.00
rolled steel section of thickness 1.25mm formed into section of 60mm x
105mm welded to form a rectangular door conforming to IS 513-1973 and
phosphated and painted and with one coat of red oxide primer, two coat of
approved enamel paints the frames work with 4nos. of hold fast of size 200 x
25 x 4mm fixed in cement concrete 1:3:6 of 20mm down size jelly and 4nos. of
ISI marked hinges 125mm long welded to the frame and fixed with shutter
made out of Honne wood styles and rails of 30mm thick with panes of 12mm
thick ‘Ecoboard’ Plain Particle Board of exterior grade conforming to IS-
3087 excluding the cost of fixtures but including labour charge for fixing of
fixtures. The hollow portion of the frame to be filled with c.c 1:2:4 of 20mm
down size jelly.
7.24 ‘Providing and fixing cold rolled prepainted steel windows of IS standards,
made out of 0.6mm thick deep drawing quality galvanised on both sides
120gms/sq.mtr. Primer coat upto 5 microns with thermosetting epoxy resin
and finish painted with a polyester based paint 20 microns thick. The size of
profiles is approximately 46x52mm for external frames, 46x46mm section for
shutters, 46x70mm section for centre mullion/transom and 18x31mm
section is for fixing glasses. The section should be cut to length joint mitred
and assembling by means of corner brackets made out of cold rolled cold
annealed strips of 1.2mm thick duly galvanised and fixed with nickle plated
self taping screws. The shutters are provided with approved quality of
fixtures like handles made out of zamac alloy die cast and powder coated,
receiver made of glass filled nylone and hingles made out of CRCA powder
coated. 4mm thick glass should be fixed with EPDM gaskets. Guard bars
fabricating out of 10mm square bright bars shall be fixed horizontally at
125mm C/C by rivetting to the external frame. The above frame are fixed to
the concrete/masonry walls by means of self expanding screws.
7.24.1 a) -do- with 4mm float glass without gaurd bars Sqm 3,520.00
b) -do- with 4mm tinted glass without gaurd bars Sqm 3,600.00
c) -do- with 4mm float glass with gaurd bars Sqm 4,000.00
d) -do- with 4mm tinted glass with gaurd bars Sqm 4,250.00
Rate
Sl. No. Description Unit
Rs. Ps.
7.25 ‘Providing and fixing cold rolled prepainted steel partitions of IS standards, Sqm 2,700.00
made out of 0.6mm thick deep drawing quality galvanised on both sides
120gms/sq.mtr. Primer coat upto 5 microns with thermosetting epoxy resin
and finish painted with a polyester based paint 20 microns thick. The size of
profiles is 46x52mm for external frame. section for mullion or transom is of
size 46x52mm section for fixing glass/board is of 18x3mm. The section
should be cut to length joint mitred and assembling by means of corner
brackets made out of cold rolled cold annealed strips of 1.2mm thick duly
galvanised and fixed with nickle plated self taping screws. 5mm thick glass
should be fixed with EPDM gaskets. 10mm thick prelaminated particle board
shall be fixed with the help of the clipping bead. The above frame are fixed to
the concrete/masonry walls and floor by means of self expanding screws.
7.26 Supplying and fixing pressed steel door frames size 125x65 mm Sqm 3,500.00
manufactured from 1.25mm thick carbon steel or imported steel strips with
mitred joints of 900 for door for openings and shutter made out of seasoned
Honne wood, styles of 30mm, thick with lock rail of 160mm, width top and
side rails of 100 mm. width and bottom rails of 250mm width and panel
filling with 12mm thick particle board of exterior grade bonded with phenol
formal dehide resin and the shutter shall be rot proof, vermin proof, heat
resistant guaranteed against shrinkage, warpage and such other defects for
a period of 3 years. This shall be as per approved drawings, specification and
direction including cost of conveyance, manufacturing, painting with enamel
paint 2 coats over primer coat, cost of labour for all items of work,
machinery, equipment and all other incidental charges with all lead, lift
loading and unloading etc., complete. The Hollow portion of the frame to be
filled with cement concrete 1:2:4.
7.27 Supplying and fixing pressed steel door frames of size 100x50 mm Sqm 3,800.00
manufactured from 1.25mm thick carbon steel or imported steel strips with
mitred joints of 900degree for window openings and shall be suitable to fix
M.S. grills as per design and drawings using 12mm dia rods at 100mm centre
to centre horizontally and two members of M.S. flats of 6mmx40mm size at
150 mm apart, welded into a frame of 6mmx40mm size M.S. flats with 16mm
size lugs, and 8 Nos. of 100mm size hingles, 4 Nos of Butt Stay pins and 4 Nos.
Tower bolts and shutters half panelled and half glazed with shutters made
out of seasoned honne wood, styles of 30mm thick and 100mm width and
rails of 30mm thick and 100 mm width and using 4mm thick pin headed
glass and panel, filling with 12mm thick particle board of exterior grade
bonded with phenol formal dehide resin and the shutter shall be rot proof
vermin proof, heat resistant guaranteed against shrinkage, warp age and
such other defects for a period of 3 years. This shall be as per approved
drawings, specification and direction including cost of conveyance,
manufacturing, painting with 2 coats enamel paint over one coat of primer,
cost of labour for all items of work, machinery, equipment and all other
incidental charges with all lead, lift loading and unloading etc., complete.
The Hollow portion of the frame to be filled with cement concrete 1:2:4.
7.28 Providing electric welding using carbon electrodes including cost of welding cm 2.15
machine, power charges, welding rods, and labour charges for welding etc.,
complete as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
7.29 Fabrication supplying and erecting M.S. tubular trusses of all spans with Kgs 133.50
prefabricated steel applications using quality material and are durable,
reliable and corrosion and abrasion resistant. Welding shall confirm to latest
structural welding code. Quality shall be on various parameters like shape,
size design gauge amd polish. The entire trusses is anchored in RCC column
by using 4 nos. of M.S. anchor bolts at each support with 10mm thick base
plate and shoe plate. The work includes cutting, straightening, placing in
position of M.S. pipes and welding wherever necessary and applying one coat
of redoxide primer coat to all the member including cost of all materials,
labour charges, and hire charges of machineries for cutting, welding,
grinding and erection equipments, with all lead and lift, transportation etc.,
complete as per specification.
7.30 Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The Kgs 119.30
bottom & top member is provided with 50x50x6mm double equal angle,
welded back to back and in between top & bottom line, in areas of mid
section is provided with 50x50x6mm equal single angle for vertical and
inclined members and at supporting ends 40x40x5mm single angle is
provided. All the members are welded together with 6mm gusset plate as per
Drawing No.CBS/SD/K-Mantap/9/MND/97. The entire truss is anchored in
RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm
thick base plate and shoe plate. The work includes cutting, straightening,
placing in position of M.S. angle and welding wherever necessary, and
applying one coat of red oxide primer coat to all the members including cost
all materials, labour charges, and hire charges of machineries for cutting,
welding, grinding and erection equipments,etc., complete as per
specification.
7.31 Fabricating, providing and erecting in position of M.S. Ornamental security Kgs 137.20
Grill Gate without hot dip using 75x 12mm MS Flat for alround frame work
with verticals at the centre and horizontal centre support MS Square of 20 x
20 mm of different heights as shown in the drawing are to be fixed at 16 cms
C/C for square bars of full height and at 8cms C/C for bottom rods providing
ornamental. C1 Designers at the bottom and C1 arrows inthe middle and top.
The entire frame work is to be fixed by means of expansion bolts to the brick
pillars with necessary drilling holes, the work includes providing two coats of
enamel painting over one coat of red lead ready mix primer coat etc.,
complete cost of labour, painting, erection charges using hoist pulleycranes
with all lead and lift, loading, transporting and unloading using hoist pulley
cranes, scaffolding charges and all other incidental charges required for
successful completion to the work as per specification and drawings.
7.32 Fabricating, providing and erecting in position of Hot dip galvanised M.S. Kgs 156.50
Ornamental security Grill Gate using 75x 12mm MS Flat for alround frame
work with verticals at the centre and horizontal centre support MS Square of
20 x 20 mm of different heights as shown in the drawing are to be fixed at 16
cms C/C for square bars of full height and at 8cms C/C for bottom rods
providing ornamental. C1 Designers at the bottom and C1 arrows inthe
middle and top. The entire frame work is to be fixed by means of expansion
bolts to the brick pillars with necessary drilling holes, the work includes
providing two coats of enamel painting over one coat of red lead ready mix
primer coat etc., complete cost of labour, painting, erection charges using
hoist pulleycranes etc., as per specification and drawings.
Rate
Sl. No. Description Unit
Rs. Ps.
7.33 Fabricating, providing and erecting in position of M.S. Ornamental security Kgs 135.00
Grill Gate without hot dip using 75x 12mm MS Flat for alround frame work
with verticals at the centre and horizontal centre support MS Square of 20 x
20 mm of different heights as shown in the drawing are to be fixed at 16 cms
C/C for square bars of full height and at 8cms C/C for bottom rods providing
ornamental C1 Designers at the bottom and C1 arrows inthe middle and top.
The entire frame work is to be fixed by means of expansion bolts to the brick
pillars with necessary drilling holes, the work includes providing two coats of
enamel painting over one coat of red lead ready mix primer coat etc.,
complete cost of labour, painting, erection charges using hoist pulleycranes
etc., as per specification and drawings.
7.34 Fabricating, providing and erecting in position Hot dip galvanised M.S. Kgs 161.00
Ornamental security Grill using 75x 12mm MS Flat for alround frame work
with verticals at the centre and horizontal centre support MS Square of 20 x
20 mm of different heights as shown in the drawing are to be fixed at 16 cms
C/C for square bars of full height and at 8cms C/C for bottom rods providing
ornamental C1 Designers at the bottom and C1 arrows inthe middle and top.
The entire frame work is to be fixed by means of expansion bolts to the brick
pillars with necessary drilling holes, the work includes providing two coats of
enamel painting over one coat of red lead ready mix primer coat etc.,
complete cost of labour, painting, erection charges using hoist pulleycranes
with all lead and lift, loading, transporting and unloading using hoist pulley
cranes, scaffolding charges and all other incidental charges required for
successful complete to the work as per specification and drawings.
7.35 Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. Sqm 2514.00
hollow pipe of 14 gauge, welded to 20mmx20mm M.S. square rod placed
vertically, spaced at 100mm at regular intervals of 600mm. These vertical
rods laterally tied to 3 horizontal rods spaced at equal interval. These
assembly is fixed to concrete by using expansion bolts and welding the same
to reinforcement bars and making good the surface. All the joints and
sections should be cut to length, welded and grinded wherever necessary etc.,
complete. The work includes cost of all materials, labour charges for all items
of work, hire charges for welding, cutting and grinding equipment, and
electrically charges, etc., complete as per specification and drawing.
7.36 Providing and fixing M.S. Grill over existing compound wall as per Chief Sqm 5526.00
Architect drawing No.12686, using 16mm x 16mm M.S. Square rod at
150mm c/c spacing and 6mm x 40mm M.S. flats at horizontal and 6mm x
12mm M.S. flat for ornamental design and providing shop edge design at the
vertex of every vertical rods, including welding, grinding wherever necessary.
All the steel surface should be thorougly cleaned free of rust and painted
with anti corrosive paint (shop paint) etc., complete. The work includes cost
of all materials, labour charges for all items or work, hire charges for
welding, cutting and grinding equipment, and electrically charges, etc.,
complete as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
7.37 Providing and fixing M.S. Gate as per Chief Architect Drawing, using Sqm 3097.00
50mmx50mm 14 guage M.S. hollow pipe frame work bent to ornamental
shape as shown in the drawing and 35mmx6mm and 16x16mm Square rods
for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm
M.S. flats for horizontal member and at the top cast iron spikes are provided
at alternate vertical members as shown inthe drawing etc., complete. All the
steel surface should be thorougly cleaned free of rust and painted with anti
corrosive paint (shop paint) etc., complete. The work includes cost of
materials, labour charges for all items of work, hire charges fo welding,
cutting and grinding equipment, and electrically charges, with lead and lift,
loading and unloading charges, etc., complete as per specification.
7.38 Providing and fixing Stainless steel staircase railing with hand rail 50mm dia Sqm 5920.00
16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage,
stainless steel vertical pipe spaced at 1.20m regular intervals, and 5 Nos.of
25mm dia. stainless steel hollow horizontal pipe are welded to vertical
50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by
using expansion bolts by drilling concrete etc., complete including cost of
materials, labour, HOM of machineries and electrical charges, etc., complete
as per specifications.
7.39 Providing and fixing 304 - grade stainless steel hand rails of 14-guage pipes Sqm 5770.00
for Ramps or Staircase are made out of stainless steel hallow pipes, using
50mm dia for verticals @ 1.60 mtr c/c are fixed tot he ramps or steps by
drilling with bolts and 100mm dia MS base plates 10mm gauge for fixing of
Vertical pipes 4 - Nos anchor bolts & 40mm dia pipes are fixed horizontally
for 2-rows top, one pipes are fixed with vertical pipes another one are fixed
with elbows and 25mm dia pipes are fixed horizontally for 2-rows below top
measure @ equal intervals including cutting, welding, bending wherever
necessary with suitable caps @ tops, bottoms & corners finishing with mat /
shining etc., complete including cost and conveyance of all materials, labour
for all items of work, HOM of equipment with all lead and lift, loading and
unloading, transportation charges and all other incidental charges etc.,
complete as per specification and directions of the Engineer-in-charge of the
work. Ramps or Staircase for physically challenged.
Note:
1 KSRB 7-14 and KSRB 7-15 : Door opening shall only be deleted from the
overall measurements and balance area shall only be considered for
payment.
2 Lift charges : The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.2.50/sqm per floor may.
Rate
Sl. No. Description Unit
Rs. Ps.
Rate
Sl. No. Description Unit
Rs. Ps.
Roofing
Rate
Sl. No. Description Unit
Rs. Ps.
8.00 ROOFING
8.1 KSRB-8.1: Providing and fixing in position stone slab roofing 10 to 12 cms Sqm 758.50
thick laid to line and level over wooden rafters or R.C.C. battens, pointing
exposed joints with cement mortar 1:4 including cost of materials, labour,
curing complete as per specifications. (wooden rafters and R.C.C. battens to
be paid separately)
8.3 KSRB-8.3-1: Providing and laying to required line and slope roofing with Sqm 342.10
corrugated asbetos cement sheet 6mm. thick fixed with galvanised iron J or L
hooks, bolts and nuts 8mm. dia C.1 plain and bitumen washers over the
existing purities, rafters and trusses including cost of materials, labour,
complete as specifications.
8.5 KSRB 8.6-1 : Providing and fixing on wall surfaces cast iron rain down water m 1087.00
pipes 75 mm dia including filling the joints with spun yarn soaked in neat
cement slurry 1:2 with necessary specials like shoes, bends and offsets fixed
with iron clamps, wall plugs, screws, including cost of materials, labour,
complete as per specifications.
8.6 KSRB 8.3-2 : Providing and laying to required line and slope roofing with Sqm 375.10
semi-corrugated (Trafford) asbestos cement sheet 6mm. thick fixed with
galvanised iron J or L hooks, bolts and nuts 8mm. dia G.I plain and bitumen
washers, over the existing purlins, rafters and trusses including cost of
materials, labour, complete as per specifications.
8.7 KSRB 8.3-3 Extra for A.C. sheet corrugated / semi-corrugated sheet roofing Sqm 7.25
with vertical sheeting to a pitch exceeding 60 degrees.
8.8 KSRB 8.3-4 : Providing and fixing ridges, hips with asbetos cement sheet m 258.80
roofing with G.l. J or L hooks, bolts and nuts 8mm. dia G.I plain and bitumen
washers, serrated or plain wings, adjustable ridges, including cost of
materials, labour, complete as per specifications.
8.9 KSRB 8.3-5 : Providing and fixing northlight adjustable ridges, hips with m 211.15
asbestos cement sheet roofing with G.l. J or L hooks, bolts and nuts 8mm. dia
G.I plain and bitumen washers, serrated or plain wings, adjustable ridges,
including cost of materials, labour, complete as per specifications.
8.1 KSRB 8.4-1 : Providing and fixing Mangalore tile roofing using first class tiles Sqm 1093
with necessary special tiles for ridges and hips, teak wood reepers of size
50x25mm and pointed with cement mortar 1:4 over the existing rafters
including cost of materials, labour, curing complete as per specifications.
8.13 KSRB 8.6-2 : Providing and fixing on wall surface cast iron rain down water m 1257.00
pipes 100mm dia including filling the joints with spun yarn soaked in neat
cement slurry 1:2 with necessary specials like shoes, bends and offsets fixed
with iron clamps, wall plugs, screws, including cost of materials, labour,
curing complete as per specifications.
8.17 KSRB 8.6-6 : - do - 2.5kg / sq.cm H.D.P.E. rain down water pipes 110 mm m 473.00
outer dia.
8.18 KSRB 8.6-7 : Providing and fixing on wall surface 4.0 kg / sq.cm H.D.P.E. m 422.30
8.19 KSRB 8.6-8 : -do- 4.0 kg / sq.cm H.D.P.E. rain down water pipes 110 mm m 562.5
outer dia.
8.2 KSRB 8.7-1 : Providing and fixing in position 10mm thick plaster of paris Sqm 1326.00
(Gypsum anhydrous) for ceiling flat surface upto a height of 5 m above floor
level first class teakwood strips 25mm / 6mm with 10cm gap in between and
reinforced with rabbit wire mesh fixed to wooden frames (frame work to be
measured and paid separately) including cost of materials, labour, curing
complete as per specifications.
8.25 KSRB 8.7-6 : Extra over item No. 8.7-5 for providing plaster of paris (Gypsum Sqm/m 33.05
anhydrous) ceiling tiles above 5m height from floor level.
8.26 Proving top layer with 12mm thick silica latex plaster with smooth finishing Sqm 360.00
on top surfaces.
8.27 Providing and fixing 6mm Bronze Multi wall poly carbonate sheet for sqm 2347.00
Tubular structure. The work including cost of all materials, labour charges,
and hire charges of machineries for cutting, welding, grinding and erection
equipements, complete as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
8.28 Providing and fixing 15 mm thick densified tegular edged eco friendly light Sqm 1566.00
weight calcium silicate ceiling tiles of approved texture
spintone/cosmos/Hexa or equivalent of size 595 x 595 mm in true horizontal
level suspended on inter locking metal grid of hot dipped galvanized steel
sections (galvanizing @ 120 grams per sqm including both sides) consisting
of main T runner suitably spaced at joints to get required length and of size
24 x 38 mm made from 0.00 mm thick (minimum) sheet, spaced 1200 mm
centre to centre, and cross T of size 24 x 28 mm made out of 0.33 mm
(minimum) sheet, 1200 mm long spaced between main T at 600 mm centre
to centre to form a grid of 1200 x 600 mm and secondary cross T of length
600mm and size 24 x 28 mm made of 0.00 mm thick (minimum) sheet to be
inter locked at middle of the 1200 x 600 mm panel to form grid of size 600 x
600 mm resting on periphery walls / particulars on a Perimeter wall angle
precioated steel of size 24 x 24 x 3000 mm made of 0.40 mm thick with 25
mm long dry wall screws at 230 mm intervals and laying 15 mm thick
densifed edges calcium silicate ceiling tiles of approved texture (spintone /
Cosmos / Hexa) in the grid including cutting / making opening for services
like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever
required, Main T runners ti be suspended from ceiling using G I slotted cleats
of size 25x35x1.6 mm fuixed to ceiling with 12.5 mm dia and 50 mm long
dash fasterners, 4 mm GI adjustable rods with galvanized stell level clips of
size 85 x 30 x 0.80mm spaced at 1200 mm centre to centre along main T
bottom exposed with 24 mm of all T sections shall be prepainted with
polyster baked paint for all heights, as per specifications, drawings and as
directed by Engineer in charge.
1 Only calcium silicate false ceiling area will be measured from wall to
wall. No deduction shall be made for exposed frames / openings (cut
outs) having area less than 0.30 sqm. The calcium silicate ceiling tile
shall have NRC value of 0.50 (Minimum) light reflection > 85% non-
combustible as per B S 476 part IV, 100% humidity resistance and also
having thermal conductivity < 0.043 w/m 0 KC.
Rate
Sl. No. Description Unit
Rs. Ps.
Wood Work
Rate
Sl. No. Description Unit
Rs. Ps.
9.29 KSRB-9.10-2: -do- Honne wood half panelled and half glazed shutters for Sqm 3419.00
doors, styles and rails of 35mm. thick with bottom and lock rails 180mm
wide top rail and styles 100mm wide as per drawing and panels of 25mm
thick, 4mm thick plain glass, fixed with beading 15mm wide and thickness of
finish with the shutters surface including cost of materials, labour, HOM of
machineries complete as specifications. (excluding cost of fixtures)
Specification No. Providing and fixing in position Teak wood half panelled
shutters at bottom and half glazed at top for window shutters with styles and
rails of 35mm, thick, 75mm wide in two halves with panels of 25mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including
cost of materials, labour charges, HOM of machineries complete as per
specifications. (excluding cost of fixtures).
9.60 KSRB-9.20-1: Providing and fixing in position Teak wood half panelled Sqm 6157.00
shutters at bottom and half glazed at top for window shutters with styles and
rails of 30mm, thick, 75mm wide in two halves with panels of 20mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including
cost of materials, labour charges, HOM of machineries complete as per
specifications. (excluding cost of fixtures).
Rate
Sl. No. Description Unit
Rs. Ps.
Specification No. KBS 9.34, 9.42
9.61 KSRB-9.20-2: -do- Honne wood Sqm 3628.00
9.62 KSRB-9.20-3: -do- Mathi / Nandi wood Sqm 3121.00
9.63 KSRB-9.20-4: Providing and fixing in position windows half panelled shutters Sqm 2855.00
at bottom and half glazed at top for window shutters with Honne wood styles
and rails of 35mm, thick, 75mm wide in two halves with panels filled with
NUWUD (MDF) of 18mm thick, 3mm thick reeded glass for top panels fixed
with wooden beading including cost of materials, labour charges, HOM of
machineries complete as specifications. (excluding cost of fixtures)
9.87 Supply and fixing of door shutters made of rigid PVC extruded hollow section Sqm 1947.00
(Nandi or equivalent) of 20mmx200mm with the wall thikness of 1.0mm + /
0.01mm equally divided into 4nos with tongue and groove locking
arrangements. The shutter frame is made of 30mmx79 mm with the wall
thickness of 1.5mm+/-0.15 mm section metric cut and joined at 4 corners
125 mmx225mm plastic brackets. The shutter shall be horizonatally
reinforced with 2nos of 8mm PVC rods. Teak wood battoms shall be
reinforced inside the door shutter during the fabrication of the door shutter
at those points wherever the hardware is fixed on to the door shutter.
9.88 Supply and fixing of door frame made of hollow extruded PVC Section having m 230.00
dimension of 40x57 mm with the wall thickness of 2mm+/0.2mm duly
reinforced with seasoned wood plank at the hingles side. The door frame top
2 corners shall be metric cut / welded.
9.89 Supply and fixing of door frame made of hollow extruded PVC Section having m 218.00
dimension of 40x46 mm with the wall thickness of 2mm+/0.2mm duly
reinforced with seasoned wood plank at the hingles side. The door frame top
2 corners shall be metric cut / welded.
9.90 Providng and fixing factory made splendoor of solid single leaf rigid
composite polymer laminated sal wood, door shutter of required thickness,
manufactured out of solid core door confirming to IS 2202 (Part-1) 1991,
laminated with 0.8 mm thick polymer, termite, water resistant and fire
retardent with superior gluing based on vacuum lamination technology and
with various pre moulded design on both faces conforming to IS 6307-1985,
using adhesive confirming to IS 4835-1979 and door shutters tested in
confirmation to IS 4020-1994. The finish of shutters will be
TEAK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs
WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive
of supply of shutters to respective work spot.
9.92 Providing and fixing PVC Hollow Door Frame of the size 50x47mm with a m 370.00
wall thickness of 5mm, made out of extruded 5mm rigid PVC foam brackets
of 15x15mm M.S. Square tube. The two vertical door profiles are to be
reinforced with 19x19 mm M.S. Square tube of 19 gauge, EPDM rubber
gasket weather seal to be provided through out the frame. The door screws
through the frame by using PVC fasteners. A Minimum of 4 Nos. of screws to
be provided for each vertical member & minimum 2 Nos. for horizontal
member.
9.93 Providing and fixing factory made single leaft rigid GRP Sandwich composite Sqm 3168.00
door shutter of 32 mm thick, laminated with two GRP Isopthalic Gelcoat and
one layer of 45 gsm E-Glass Chopped strand Mat (CSM). Impregnated with
orthopthalic polyster resin. The thickness of the skins shall not be less than
1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm
thickness and a density of 20 Kg/m3 shall be used as core material. Wooden
reinforcements made of Seasoned Salwood block of cross section not less
than 28mmx32mm and also necessary salwood reinforcements for fixing the
metal fittings such as tower bolts, aldrops, handles, etc., shall be provided. A
structural adhesive compatible with EPS foam shall be used for bonding the
core material, the Salwood reinforcement and the skins. The material and
process for manufacturing the door shutters shall confirm to RV/TIFAC
Composites Design centre Standards and specifications and the door shutters
tested in cofirmation to IS 4020-1994. The finish of shutter will be plain
colour White/Ivory/Beige/Light Grey or any other colour using high quality
pigments. Exclusing cost of fixtures and inclusive of suppy of shutters to
respective work spot.
9.94 Providing and fixing factory made single leaf rigid GRP Sandwich composite Sqm 3960.00
door shutter of 40 mm thick, laminated with two GRP skins with wood grain
finish, fabricating using U.V-Stabilized Isopthalic Gelcoat and one layer of
450 gns E-Glass Chopped strand Mat (CSM). Impregnated with orthopthalic
polyster resin. The thickness of the skins shall not be less than 1.5mm.
Expanded Polystyrene (EPS) structural foam panel of 37mm thickness and a
density of 20 Kg/m3 shall be used as core material. Wooden reinforcements
made of Seasoned Salwood block of cross section not less than 36mmx32mm
and also necessary salwood reinforcements for fixing the metal fittings such
as tower bolts, aldrops, handles, etc., shall be provided. A structural adhesive
compatible with EPS foam shall be used for bonding the core material, the
Salwood reinforcement and the skins. The material and process for
manufacturing the door shutters shall confirm to RV/TIFAC Composites
Design Centre Standards and specifications and the door shutters tested in
cofirmation to IS 4020-1994. The finish of shutter will be plain colour
White/Ivory/Beige/Light Grey or any other colour using high quality
pigments. Excluding cost of fixtures and inclusive of suppy of shutters to
respective work spot.
Rate
Sl. No. Description Unit
Rs. Ps.
9.95 Providing and fixing 65mmx90mm GRP Door frame fabricated using E-Glass m 473.00
Chopped Strand Mat (CSM). U.V-Stabilized Isopthalic Gelcoat and Isopathalic
resin.The thickness of the GRP skin shall not be less than 2.0 mm. The door
frame consists of four segments, which are provided with plug-in-socket
arrangement in-situ in the mould. The segments are plugged in and are
joined together by means of screws. The GRP frame shall be provided with
wooden reinforcement of 6 locations for high screw holding capacity for
fixing metalic hold fast and shall be consolidated by filling with medium
density foam/plaster with fibre reinforcement. Six Numbers of 260
mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the
frame.
9.96 Providing and fixing 65mmx125mm GRP Door Frame fabricated using E- Sqm 550.00
glass Chopped Strand Mat (CSM) U.V-Stabilized Isopthalic Gelcoat and
Isopathalic resin.The thickness of the GRP skin shall not be less than 2.0 mm.
The door frame consists of four segments, which are provided with plug-in-
socket arrangement in-situ in the mould. The segments are plugged in and
are joined together by means of screws. The GRP frame shall be provided
with wooden reinforcement of 6 locationsfor high screw holding capacity for
fixing metaling hold fast and shall be consolidated by filling with medium
density foam/plaster of Paris with fibre reinforcement. Six Numbers of 260
mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the
frame.
9.97 Providng G.R.P. unbreakable railings available in a wide range of attaractive Each 435.00
colours made out of cross section > 70mmx 64mm of standard length 7 feet
(approximate 3.6kg/m). The material and process for manufactured railing
shall confirm to RV-TIFAC composites design centre standards and
specifications.
9.98 Providing and fixing RCC door frames factory manufatured, with C.C. 1:1 m 218.00
1/2 :3 reinforced with 3 Nos. of 6mm dia. Main bars and 6mm dia. Stirrups
welded at 30cm C/C, vibrating, curing including cost of steel and fabricated
charges having 3 Nos. of hingles with 20mm x 3mm M.S. flat welded with
required iron rods and flats with drilling and fixing 4 No. of flat screw nuts
each in concrete for fixing hinges and making necessary provision in
concrete for fixing aldrops, tower bolts etc., including cost of one coat of oil
based enamel primer, 4 No. of hold fasts, 3 Nos. ISS Iron oxidised hinges
necessary metal screws etc., complete. 60mm x 100 mm size-Door frames.
9.99 Providing and fixing mosquito mesh to mesh to windows with 7.5 mm to 1.25 Sqm 726.00
mm thick Honne wood petties including labour charges etc., complete.
9.100 Providing and fixing require line and slope roofing with semi-corrugated PVC Sqm 836.00
roofing sheets of industrial profile 250/40 in 2.00 mm thick white colour, fire
and heat resistant having width of 1.054 mtrs. fixed with self tapping screws
with washers, over the existing purlins, rafters and trusses including cost of
materials, labour, complete as per specification.
9.101 Providing and fixing Teak Wood Hand railing to stair case using bulusters of vm 7857.00
sections 40mm x 25mm as per design drawing No: 11863 / railing issued by
the Principal Chief Architect and fixing it to the steps using anchor bolts and
necessary adhesive materials and fixing T.W. handrail of section 75 x 75 mm
to bulusters and finishing the same by using colourless polish etc., complete.
The work includes cost of all materials, labour charges for all items of work,
hire charges for welding, cutting and grinding equipment, and electricity
charges, with lead and lift, loading and unloading charges, etc., complete as
per drawing and specification.
Rate
Sl. No. Description Unit
Rs. Ps.
9.102 Providing Maranthi wood frames of doors, windows, clear story windows, cum 49808.00
ventilation and other frames, wrought, framed or assembled including
making plaster grooves (excluding cost of concrete cement and side clamps)
but including cost of materials, labours, HOM of machineries complete as per
specifications.
9.103 Providing and fixing Mosquito mesh shutters made out of Stainless Steel Sqm 7857.00
mosquito proof mesh with 95% & above visibility which is fixed to the
Powder coated aluminium frame 32mm thick of approved shade. The work
including fixing the shutters with necessary accessories, to complete as per
specification including the labour charges for fixing the shutter to the
existing frames.
9.104 Providing & Fixing Mosquito mesh shutters made out of Stainless Steel cum 2600.00
mosquito proof mesh with 95% & above visibility which is fixed to the
powder coated aluminium frame 20mm thick of approved shade. The work
including fixing the shutters with necessary accessories, to complete as per
specification including the labour charges for fixing the shutter to the
existing frames.
9.105 Providing & Fixing Mosquito mesh shutters made out of Stainless Steel cum 650.00
mosquito proof mesh with 95% & above visibility which is fixed to the
powder coated aluminium frame of size 2 1/2 x 1 1/2 all round & 32 mm
thick of approved shade. The work including fixing the shutters with
necessary accessories, to complete as per specification including the labour
charges for fixing the shutter to the existing frames.
Note:
1 Lift charges : The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.3.00/sqm per floor may be added
for every additional floor for items vide Sl.No.9.6 to 9.9, 9.14 to 9.99,
9.101 and 9.102.
Rate
Sl. No. Description Unit
Rs. Ps.
Water Proofing
10.3 KSRB 10-4: Providing and laying four courses water proofing treatment with Sqm 348.90
bitumen felt over roof consisting of first and third courses of blown and / or
residual bitumen applied hot at 1.45 kg / sqm of area for each course second
course of roofing felt Type -3 grade-1 (hessian based self finish bitumen felt)
and forth and final course of stone grit 6mm and down size or pea sized
gravel spread at 0.06 cum. / sqm including preparation of surface but
excluding grading complete with bitumen felt (hessian based) Type -3 grade-
1 blown or / and residual bitumen applied hot 1.4kg / sqm including cost of
materials, labour complete as per specifications. KBS 10.4.3
10.4 KSRB 10-5 : Providing and laying six courses water proofing treatment with Sqm 628.70
bitumen felt over roof consisting of first, third and fifth courses of blown
and / or residual bitumen applied hot at 1.45kg, 1.2kg and 1.7 kg / sqm of
area respectively, second and fourth courses of roofing felt Type-2
grade-1 (fibre based self finish bitumen felt) and sixth and final course of
stone grit 6mm and down size or pea sized gravel spread at 0.06 cum / sqm
including preparation of surface, excluding grading but including cost of
materials, labour complete as per specifications.
KBS 10.4.3
Rate
Sl. No. Description Unit
Rs. Ps.
10.5 Chipping and cleaning, construction joint and slab joint, treatment, grouting
of honey comb by cement with inorganic accelerator for cement, spray of
biological modified Ortho esters and alkaline earth, providing and laying of
patch concrete 1:2:4 for required thickness by clean granite trap jelly 20mm
and down size mixed with poly carbonxylic sulphonated neutral cellulose @
100ml/bag and aqueous acrylic silicons emulsion @ 125 ml/bag, providing
plaster for a thickness of 20mm mixed with polycarboxylic sulphonated
neutral cellulose @ 100ml/bag and aqueous acrylic silicone emulsion @
125ml/bag, slurry of cement and silica sand should be mixed with cross
linked Acrylic/styrene/butadiene based, polymer, spraying of silane and
silanol linear copolymer as water proof agent, applying of modified polymers
slurry of soft acrylic esters for extra protection for taking, and filling the bore
wherever necessary with concrete, brushing one coat of acrylic copolymer
cross linked formation on the bore.
10.7 Cleaning RCC sump tanks and RCC overhead tanks with mechanical L 0.25
dewatering including removal of sludge, mud, dirt, algea, etc. and cleaning
the wall surface of tanks using high pressure jet, vacuum cleaning and
spraying anti bacterial treatment to the wall and ceiling surfaces and UV
treatment, including removing of sludge etc., using suitable coconut
broomstick, squeesers / wipers / rubber brushes, coir brushes, plastic
buckets, mugs, dewatering using motor with portal arrangement, hose pipe
etc., complete including all safety measures.
Rate
Sl. No. Description Unit
Rs. Ps.
Drainage Work
Specification No.KBS
11.50.1 -do- 600x600mm and 450mm depth (clear inside dimesion) for single Nos. 7607.00
pipeline, using table moulded non-modular bricks of class designation 50m in
cement mortar 1:5, C.I. cover withframe (light duty) 600x600mm.
11.50.2 -do- 450x450mm and 450mm depth (inside dimesion) for single pipeline, Nos. 4272.00
using table moulded non-modular bricks of class designation 50m in cement
mortar 1:5, C.I. cover withframe (light duty) 450x450mm.
11.50.3 -do- 450x300mm and 450mm depth (inside dimesion) for single pipeline, Nos. 2853.00
using table moulded non-modular bricks of class designation 50m in cement
mortar 1:5, C.I. cover withframe (light duty) 450x300mm.
11.50.4 -do- 230x150mm and 450mm depth (clear inside dimesion) for single Nos. 727.00
pipeline, using table moulded non-modular bricks of class designation 50m in
cement mortar 1:5, C.I. cover withframe (light duty) 230x150mm.
11.51 KSRB 12-8.1.1 : Extra for item No. KSRB 12-8.1 depth beyond 450mm and Each 607.00
brick masonry chamber with table moulded non modular bricks of class
designation 50 in cement mortar 1:5 for every 150mm depth or part thereof
including cost of materials, labour charges, curing complete as per
specifications.
Specification No.KBS
11.53 KSRB 12-8.2.1 : Extra for item No. KSRB 12-8.2 depth beyond 450mm and Each 676.50
brick masonry chamber with table moulded non modular bricks of class
designation 50 in cement mortar 1:5 for every 150mm depth or part thereof
including cost of materials, labour charges, curing complete as per
specifications.
Specification No.KBS
11.55 KSRB 12-8.3.1 : Extra for item No. KSRB 12-8.3 depth beyond 450mm and Each 781.50
brick masonry chamber with table moulded non modular bricks of class
designation 50 in cement mortar 1:5 for every 150mm depth or part thereof
including cost of materials, labour charges, curing complete as per
specifications.
Note:
1 The items vide Sl.No. 11.10 to 11.18 for cement concrete bedding for
stoneware pipes.
2 The items vide Sl.No. 11.19 to 11.27 are for hauncing of stoneware pipes
with cement concrete.
3 The items vide Sl.No. 11.28 to 11.36 are for Haunching of stoneware
pipes with cement concrete surrounded encasing.
4 The walls of manholes and inspection chambers shall be built of one
brick thickness i.e., 112.5mm for depths upto 4.25m. below a depth of
4.25 m in ordinary subsoil the wall thickness shall be increased to one
and half brick i.e., 168.75mm and at 9.75m below ground two brick
thick i.e., 225 mm walls shall be built.
Rate
Sl. No. Description Unit
Rs. Ps.
Sanitary Work
12.4 KSRB 11-4 : Providing and fixing white vitreous china clay, water closet pan 2074.00
Orissa pattern of of size 580 x 440 mm with integral type footrests, 100mm S
or trap, (approved make) cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per
specifications.
12.15 KSRB 11-9.1 : Providing and fixing white vitreous china clay, flat back or half Unit 4685.00
stall urinal basin of size 580x380x350mm with 5 litres P.V.C. automatic
flushing cistern, C.I. / M.S. brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps C.I. dtrap with outlet grating
and other couplings in C.P. brass, painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications.
12.16 KSRB 11-9.2 : Providing and fixing white vitreous china clay, flat back or half Unit 7867.00
stall urinal basin of size 580x380x350mm in the range of two with 7.5 litres
P.V.C. automatic flushing cistern, C.I. / M.S. brackets, standard flush pipe and
C.P. brass spreaders with brass unions and G.I. clamps C.I. trap with outlet
grating and other couplings in C.P. brass, painting of fittings and brackets,
cutting and making good the wall and floor wherever required, including
cost of materials, labour complete as per specifications. Specification No. KBS
11
12.17 KSRB 11-9.3 : Providing and fixing white vitreous china clay, flat back back Unit 10887.00
or half stall urinal basin of size 580x380x350mm in the range of three with
10 litres P.V.C. automatic flushing cistern, C.I. / M.S. brackets, standard flush
pipe and C.P. brass spreaders with brass unions and G.I. clamps C.I. trap with
outlet grating and other couplings in C.P. brass, painting of fittings and
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.18 KSRB 11-9.4 : Providing and fixing white vitreous china clay, flat back back Unit 13834.00
or half stall urinal basin of size 580x380x350mm in the range of four with 10
litres P.V.C. automatic flushing cistern, C.I. / M.S. brackets, standard flush
pipe and C.P. brass spreaders with brass unions and G.I. clamps C.I. trap with
outlet grating and other couplings in C.P. brass, painting of fittings and
brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
12.22 KSRB 11-10.4 : Providing and fixing white vitreous china clay, squatting Unit 7977.00
plate in the range of four single squatting plates with one number 15 litre
P.V.C. automatic flushing cistern including brass coupling C.I. /M.S. brackets,
G.I. flush pipe of standard size and C.P. brass spreaders painting of fittings
and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.23 KSRB 11-11.1 : Providing and fixing white vitreous china clay, flat back wash Unit 3560.00
basin 630x450mm with a pair of 15mm C.P. brass pillar taps with C.I. /M.S.
brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings
and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
12.27 KSRB 11-11.5 : Providing and fixing white vitreous china clay, flat back wash Unit 2374.00
basin size 450x300mm with a single 15mm C.P. brass pillar tap with C.I. /M.S.
brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings
and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.28 KSRB 11-11.6 : Providing and fixing white vitreous china clay, angle back Unit 2878.00
wash basin size 600x480mm with a single 15mm C.P. brass pillar tap with
C.I. /M.S. brackets, 32 mm C.P. brass waste of standard pattern, painting of
fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
12.29 KSRB 11-11.7: Providing and fixing white vitreous china clay, angle back Unit 2592.00
wash basin size 400x400mm with a single 15mm C.P. brass pillar tap with
C.I. /M.S. brackets, 32 mm C.P. brass waste of standard pattern, painting of
fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.30 KSRB 11-11.8: Providing and fixing white vitreous china clay, surgeon type Unit 4266.00
wash basin size 660x460mm with a pair of 15mm C.P. brass pillar taps with
pair of below operated levers, C.I. /M.S. brackets, 32 mm C.P. brass waste of
standard pattern, painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of materials, labour
complete as per specifications.
KBS 11
12.32 KSRB 11-12.1: Providing and fixing kitchen sink of white glazed fire clay of Unit 3335.00
size 600x450x250mm with M.S. /C.I. brackets, C.P. brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per
specifications.
KBS 11
12.33 KSRB 11-12.2: Providing and fixing kitchen sink of white glazed fire clay of Unit 3779.00
size 750x450x250mm with M.S/C.I. brackets, C.P. brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per
specifications.
KBS 11
12.34 KSRB 11-13.1: Providing and fixing laboratory sink of white glazed fire clay Unit 3130.00
of size 600x450x200mm with M.S/C.I. brackets, C.P. brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per
specifications.
KBS 11
12.35 KSRB 11-13.2: Providing and fixing laboratory sink of white glazed fire clay Unit 2822.00
of size 450x300x150mm with M.S/C.I. brackets, C.P. brass chain with rubber
plug, 32 mm C.P. brass waste, tap with union, brass stop cock complete,
painting of fittings and brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per
specifications.
KBS 11
12.36 KSRB 11-14.1: Providing and fixing stainless steel kitchen sink of size Unit 17853.00
510x1040mm bowl depth 178mm, with drain board, M.S/C.I. brackets,
stainless steel plug 40 mm, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
12.37 KSRB 11-14.2: Providing and fixing stainless steel kitchen sink of size Unit 9492.00
500x1000mm bowl depth 178mm, with drain board, M.S/C.I. brackets,
stainless steel plug 40 mm, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications.
12.38 KSRB 11-14.3: Providing and fixing stainless steel kitchen sink of size of size Unit 6496.00
400x915mm bowl depth 160mm, with drain board, M.S/C.I. brackets,
stainless steel plug 40 mm, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications.
12.39 KSRB 11-15.1: Providing and fixing 600x450mm bevel Lead edge mirror or Unit 1214.00
superior glass with 6mm hard board backing and fixed to wooden cleats with
C.P. screws, washers, including cost of materials, labour complete as per
specifications.
12.4 KSRB 11-15.2: Providing and fixing 450mm dia circular shape mirror with Unit 789.20
plastic moulded frame of approved make and shade with 6mm thick hard
board backing including cost of materials, labour complete as per
specifications.
12.41 KSRB 11-15.3: Providing and fixing 453x357mm dia rectangular shape Unit 1136.40
mirror with plastic moulded frame of approved make and shade with 6mm
thick hard board backing including cost of materials, labour complete as per
specifications.
12.42 KSRB 11-15.4: Providing and fixing 450x350mm dia oval shape mirror with Unit 862.00
plastic moulded frame of approved make and shade with 6mm thick hard
board backing including cost of materials, labour complete as per
specifications.
12.43 KSRB 11-15.5: Providing and fixing 1500x450mm dia rectangular shape Unit 1654.00
mirror with plastic moulded frame of approved make and shade with 6mm
thick hard board backing including cost of materials, labour complete as per
specifications.
12.44 KSRB 11-16 : Providing and fixing 600x120mm glass shelf supported on Unit 1202.30
alluminium angle frame with C.P. brass brackets, guard rail fixed to wooden
cleats with C.P. brass screws and washers including cost of materials, labour
complete as per specifications.
12.45 KSRB 11-17.1 : Providing and fixing C.P. brass towel rail 740mm length, Unit 741.00
20mm dia with C.P. brackets, fixed to wooden cleats with C.P. brass screws
including cost of materials, labour complete as per specifications.
12.46 KSRB 11-17.2 : Providing and fixing C.P. brass towel rail 600mm length, Unit 679.70
20mm dia with C.P. brackets, fixed to wooden cleats with C.P. brass screws
including cost of materials, labour complete as per specifications.
12.47 KSRB 11-18-1.1 : Providing and fixing sand cast iron soil waste and vent m 689.70
pipes 100mm dia with spun yarn soaked in cement slurry and cement mortar
1:2 including cost of materials, labour complete as per specifications. KBS
11-1.10
12.48 KSRB 11-18-1.2 : Providing and fixing sand cast iron soil waste and vent m 665.80
pipes 75mm dia with spun yarn soaked in cement slurry and cement mortar
1:2 including cost of materials, labour complete as per specifications. KBS
11-1.10
12.49 KSRB 11-18-1.3 : Providing and fixing sand cast iron soil waste and vent m 331.60
pipes 50mm dia with spun yarn soaked in cement slurry and cement mortar
1:2 including cost of materials, labour complete as per specifications. KBS
11-1.10
Rate
Sl. No. Description Unit
Rs. Ps.
12.50 KSRB 11-18-2.1 : Providing and fixing sand cast iron soil waste bends 100 Each 509.40
mm dia with access door, insertion of rubber washer 3mm thick bolts and
nut, with spun yarn soaked in cement slurry and cement mortar 1:2
including cost of materials, labour, testing complete as per specifications.
12.51 KSRB 11-18-2.2 : Providing and fixing sand cast iron soil waste bends 75 mm Each 425.00
dia with access door, insertion of rubber washer 3mm thick bolts and nut,
with spun yarn soaked in cement slurry and cement mortar 1:2 including
cost of materials, labour, testing complete as per specifications.
12.52 KSRB 11-18-2.3 : Providing and fixing sand cast iron soil waste bends 50 mm Each 396.80
dia with access door, insertion of rubber washer 3mm thick bolts and nut,
with spun yarn soaked in cement slurry and cement mortar 1:2 including
cost of materials, labour, testing complete as per specifications.
12.53 KSRB 11-18-3.1 : Providing and fixing sand cast iron soil waste plain bend Each 390.70
100 mm dia with spun yarn soaked in cement slurry and cement mortar 1:2
including cost of materials, labour, testing complete as per specifications.
KBS 11-1.10
12.54 KSRB 11-18-3.2 : Providing and fixing sand cast iron soil waste plain bend 75 Each 305.00
mm dia with spun yarn soaked in cement slurry and cement mortar 1:2
including cost of materials, labour, testing complete as per specifications.
KBS 11-1.10
12.55 KSRB 11-18-3.3 : Providing and fixing sand cast iron soil waste plain bend 50 Each 327.10
mm dia with spun yarn soaked in cement slurry and cement mortar 1:2
including cost of materials, labour, testing complete as per specifications.
KBS 11-1.10
12.56 KSRB 11-18-4.1 : Providing and fixing sand cast iron soil waste double equal Each 1158.60
junction of required degree with access door 100x100x100x100mm,
insertion of rubber washers 3 mm thick bolts and nuts, including cost of
materials, labour, testing complete as per specifications.
KBS 11-1.10
12.57 KSRB 11-18-4.2 : Providing and fixing sand cast iron soil waste double equal Each 845.20
junction of required degree with access door 75x75x75x75mm, insertion of
rubber washers 3 mm thick bolts and nuts, including cost of materials,
labour, testing complete as per specifications.
KBS 11-1.10
12.58 KSRB 11-18-4.3 : Providing and fixing sand cast iron soil waste double equal Each 738.80
junction of required degree with access door 50x50x50x50mm, insertion of
rubber washers 3 mm thick bolts and nuts, including cost of materials,
labour, testing complete as per specifications.
KBS 11-1.10
12.59 KSRB 11-18-5.1 : Providing and fixing sand cast iron soil waste single equal Each 997.00
junction of required degree with access door 100x100x100mm, insertion of
rubber washers 3 mm thick bolts and nuts, including cost of materials,
labour, testing complete as per specifications.
KBS 11-1.10
12.60 KSRB 11-18-5.2 : Providing and fixing sand cast iron soil waste single equal Each 738.70
junction of required degree with access door 75x75x75mm, insertion of
rubber washers 3 mm thick bolts and nuts, including cost of materials,
labour, testing complete as per specifications. KBS 11-1.10
Rate
Sl. No. Description Unit
Rs. Ps.
12.61 KSRB 11-18-5.3 : Providing and fixing sand cast iron soil waste single equal Each 577.20
junction of required degree with access door 50x50x50mm, insertion of
rubber washers 3 mm thick bolts and nuts, including cost of materials,
labour, testing complete as per specifications.
KBS 11-1.10
12.62 KSRB 11-18-6.1 : Providing and fixing sand cast iron soil waste double Each 1166.00
unequal junction of required degree with access door 100x100x75x75mm,
insertion of rubber washers 3 mm thick bolts and nuts, including cost of
materials, labour, testing complete as per specifications.
KBS 11-1.10
12.63 KSRB 11-18-6.2 : Providing and fixing sand cast iron soil waste double Each 1158.50
unequal junction of required degree with access door 100x100x50x50mm,
insertion of rubber washers 3 mm thick bolts and nuts, including cost of
materials, labour, testing complete as per specifications.
KBS 11-1.10
12.64 KSRB 11-18-6.3 : Providing and fixing sand cast iron soil waste double Each 458.50
unequal junction of required degree with access door 75x75x50x50mm,
insertion of rubber washers 3 mm thick bolts and nuts, including cost of
materials, labour, testing complete as per specifications.
KBS 11-1.10
12.65 KSRB 11-18-7.1 : Providing and fixing sand cast iron soil waste double Each 878.30
unequal junction of required degree with access door 100x100x75mm,
insertion of rubber washers 3 mm thick bolts and nuts, including cost of
materials, labour, testing complete as per specifications.
KBS 11-1.10
12.66 KSRB 11-18-7.2 : Providing and fixing sand cast iron soil waste single Each 836.60
unequal junction of required degree with access door 100x100x50mm,
insertion of rubber washers 3 mm thick bolts and nuts, including cost of
materials, labour, testing complete as per specifications.
12.99 KSRB 11-18-19.1 : Providing and fixing M.S. stays and clamps for sand cast No 184.80
iron pipes of 100mm dia including cost of materials, labour, complete as per
specifications.
12.100 KSRB 11-18-19.2 : Providing and fixing M.S. stays and clamps for sand cast No 165.30
iron pipes of 75mm dia including cost of materials, labour, complete as per
specifications.
12.101 KSRB 11-18-19.3 : Providing and fixing M.S. stays and clamps for sand cast No 45.85
iron pipes of 50mm dia including cost of materials, labour, complete as per
specifications.
12.102 KSRB 11-18-14.2 : Providing and fixing sand cast iron soil waste double Each 1109.00
unequal invert plain branches of required degree 100x100x75x75mm
including cost of materials, labour, testing complete as per specifications.
12.106 Providing vulcanizing or rubber float of approved 1st quality and make Each 167.00
confirming to ISI specifications and fixing for low down cistern as directed
Rate includes cost of materials and conveyance to work spot.
12.107 Providing wash basin brackets of approved 1st quality and make confirming Pair 207.00
to ISI specifications and fixing for low down cistern as directed Rate. includes
cost of materials and conveyance to work spot.
12.108 Providing pedestal for wash basin of approved 1st quality and make Each 835.00
confirming to ISI specifications and fixing for low down cistern as directed
Rate includes cost of materials and conveyance to work spot.
Rate
Sl. No. Description Unit
Rs. Ps.
12.109 Providing and fixing white vitreous china clay urinals with flat back of Each 820.00
approved make fixed to wooden plugs including bends, painting white to
exposed pipes etc., complete as per directions. (Rate includes cost of all
materials and lead). A grade.
12.110 Providing white vitreous china clay Indian pattern squatting urinals with Each 920.00
white glazed foot rests of approved quality and make confirming to ISI
specifications and fixing in Position with M-15 as directed of size 50.8 cms x
38 cms x 10 cms - A Grade (Rate includes cost of all materials and
comveyance to work spot.
12.111 Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia. Each 145.00
12.112 Providing stoneware gully trap of aaproved quality and make fixing in M-15
and plastering with CM 1:3 wherever necessary. (Rate includes cost of all
materials, fixtures and lead).
12.112.1 -do- 10cms x 10 cms Each 175.00
12.112.2 -do- 15 cms x 10 cms Each 250.00
12.113 Providing and fixing CI Nahani trap of approved make confirming to ISI
specifications and construction of Cistern in M-15 as per directions (Rate is
inclusive of cost of materials and fixtures and conveyance of materials to
work spot.
13.10 KSRB-13-3.1: Providing and fixing in trenches galvanosed / mild steel tubes m 147.00
(medium grade) 15mm dia nominal bore with all fittings (earth work in
trenches to be measured and paid for separately) including cost of all
materials, labour charges. HOM of equipments and testing complete as per
specifications.
13.19 KSRB-13-3.10: Providing and fixing in trenches galvanosed / mild steel tubes m 1604.30
(medium grade) 150mm dia nominal bore with all fittings (earth work in
trenches to be measured and paid for separately) including cost of all
materials, labour charges. HOM of equipments and testing complete as per
specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
Specification No. KBS 13.2.14 / 13.6
13.20 KSRB-13-4.1: Making connection of G.I. distribution branch with G.I. main of Nos. 306.70
25 to 40 mm. nominal bore, including cutting and threading the pipes,
providing and fixing Tee, nuts, labour for all item or works, testing and HOM
of equipments complete as per specifications.
13.26 KSRB-13-6.2-1 : Providing and fixing in position brass stop cock of approved Each 160.50
quality 15mm nominal bore including cost of all materials, labour and HOM
of equipments with all leads complete as per specifications.
13.27 KSRB-13-6.2-2 : Providing and fixing in position brass stop cock of approved Each 159.75
quality 20mm nominal bore including cost of all materials, labour and HOM
of equipments with all leads complete as per specifications.
13.28 KSRB-13-6.2-3 : Providing and fixing in position brass stop cock of approved Each 158.25
quality 25mm nominal bore including cost of all materials, labour and HOM
of equipments with all leads complete as per specifications.
13.29 KSRB-13-6.2-4 : Providing and fixing in position brass stop cock of approved Each 158.25
quality 32mm nominal bore including cost of all materials, labour and HOM
of equipments with all leads complete as per specifications.
13.30 KSRB-13-6.2-5 : Providing and fixing in position brass stop cock of approved Each 158.60
quality 40mm nominal bore including cost of all materials, labour and HOM
of equipments with all leads complete as per specifications.
13.31 KSRB-13-6.2-6 : Providing and fixing in position brass stop cock of approved Each 156.15
quality 50mm nominal bore including cost of all materials, labour and HOM
of equipments with all leads complete as per specifications.
13.32 KSRB-13-6.3-1 : Providing and fixing in position brass gate valve with C.I. Each 321.00
wheel of approved quality (screwed end) 15mm nominal bore including cost
of all materials, labour and HOM of equipments with all leads complete as
per specifications.
13.33 KSRB-13-6.3-2 : Providing and fixing in position brass gate valve with C.I. Each 404.25
wheel of approved quality (screwed end) 20mm nominal bore including cost
of all materials, labour and HOM of equipments with all leads complete as
per specifications.
13.34 KSRB-13-6.3-3 : Providing and fixing in position brass gate valve with C.I. Each 580.70
wheel of approved quality (screwed end) 25mm nominal bore including cost
of all materials, labour and HOM of equipments with all leads complete as
per specifications.
13.39 KSRB-13-6.3-8 : Providing and fixing in position brass gate valve with C.I. Each 3043.00
wheel of approved quality (screwed end) 80mm nominal bore including cost
of all materials, labour and HOM of equipments with all leads complete as
per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
Specification No. KBS 13.2.6 / 13.3
13.40 KSRB-13-6.4-1 : Providing and fixing in position brass ball valve high or low Each 377.00
pressure with plastic float of approved quality 15mm nominal bore including
cost of all materials, labour and HOM of equipments with all leads complete
as per specifications.
13.50 KSRB-13-6.7-1 : Providing and fixing in position chromium plated brass Set 787.60
shower rose with 15 or 20mm inlet 100mm dia including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
Specification No. KBS
13.51 KSRB-13-6.7-2 : Providing and fixing in position chromium plated brass Each 817.20
shower rose with 15 or 20mm inlet 150mm dia including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications.
13.61 KSRB-13-7.2-3 : Providing and fixing in position 40mm nominal bore non- Nos. 1005.80
return valve vertical type of approved make including cost of all materials,
labour and HOM of equipments with all leads complete as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
Specification No. KBS 13.2.10 /13.13
13.62 KSRB-13-7.2-4 : Providing and fixing in position 50mm nominal bore non- Nos. 1429.00
return valve vertical type of approved make including cost of all materials,
labour and HOM of equipments with all leads complete as per specifications.
13.63 KSRB-13-7.2-5 : Providing and fixing in position 65mm nominal bore non- Nos. 1777.00
return valve vertical type of approved make including cost of all materials,
labour and HOM of equipments with all leads complete as per specifications.
13.65 KSRB-13-7.2-7 : Providing and fixing in position 100mm nominal bore non- Nos. 2898.00
return valve vertical type of approved make including cost of all materials,
labour and HOM of equipments with all leads complete as per specifications.
13.66 KSRB-13-8.1 : Providing and fixing to wall, ceiling and floor, low density m 83.50
polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter
with special flange, compression type fittings, wall clips, making good the
wall, ceiling and floor including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications.
13.67 KSRB-13-8.2 : Providing and fixing to wall, ceiling and floor, low density m 108.40
polyethylene pipes 6.00 kgf/sq.cm working pressure 25mm outside diameter
with special flange, compression type fittings, wall clips, making good the
wall, ceiling and floor including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications.
13.68 KSRB-13-8.3 : Providing and fixing to wall, ceiling and floor, low density m 176.50
polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter
with special flange, compression type fittings, wall clips, making good the
wall, ceiling and floor including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications.
13.76 KSRB-13-10.3 : Providing and fixing to wall, ceiling and floor unplasticised m 99.20
PVC pipes 10.00kgf/sq.cm working pressure 25mm outside diameter chemp
plast / wavin or equivalent make with pipe fittings, wall clips, making good
the wall, ceiling and floor, including cost of all materials, labour charges,
HOM of equipments and testing complete as per specifications.
13.77 KSRB-13-10.4 : Providing and fixing to wall, ceiling and floor unplasticised m 111.00
PVC pipes 10.00kgf/sq.cm working pressure 32mm outside diameter chemp
plast / wavin or equivalent make with pipe fittings, wall clips, making good
the wall, ceiling and floor, including cost of all materials, labour charges,
HOM of equipments and testing complete as per specifications.
13.78 KSRB-13-11.1 : Providing and placing on terrace, polyethylene water storage Nos. 8332.00
tanks with manhole lid and suitable locking arrangements, making holes of
suitable diameter for inlet, outlet and over flow pipes, including cost of all
materials, labour, transport charges, HOM of equipments and testing
complete as per specifications.
13.79 Providing and fixing gun metal wheel valve conforming to IS specification of
approve make as per directions including all lead and lift etc., complete.
Each 265.00
13.79.1 -do- for 15mm dia :
Each 330.00
13.79.2 -do- for 20mm dia :
Each 460.00
13.79.3 -do- for 25mm dia :
Each 670.00
13.79.4 -do- for 32mm dia :
Each 850.00
13.79.5 -do- for 40mm dia :
13.81 Providing NP/CP waste unions confirming to ISI specifications and fixing
them in position as per directions including of cost of materials and fixtures
and conveyance to spot.
13.81.1 -do- for 32mm dia : Each 110.00
13.81.2 -do- for 40mm dia : Each 140.00
Rate
Sl. No. Description Unit
Rs. Ps.
13.81.3 -do- for 50mm dia : Each 190.00
13.82 Providing and fixing Polythelene-Aluminium-Polythelene (PE-AL-PE)
Composite Pressure Pipes confirming to IS 15450 duly “ISI” marked U.V.
stabilized with Carbon black for hot & cold water supply, capable to
withstand temperature up to 800c including all special composite fittings
(engineering plastic blend and brass inserts wherever required) e.g. elbows,
tees, reduces, couplers & connectors ect., with clamps at 1.00 meter spacing,
cutting & making good the walls etc., including testing complete as required.
(Internal work).
Concealed piping with cutting chases & making good walls etc.,
13.83.1 1216 (16mm OD) Pipe m 240.00
13.83.2 1620(20mm OD) Pipe m 280.00
13.83.3 2025 (25mm OD) Pipe m 340.00
13.83.4 2532 (32mm OD) Pipe m 440.00
13.83.5 3240 (40mm OD) Pipe m 570.00
13.83.6 4050(50mm OD) Pipe m 748.00
13.84 Providing and fixing Polythelene-Aluminium-Polythelene (PE-AL-PE)
Composite Pressure Pipes confirming to IS 15450 duly “ISI” marked U.V.
stabilized with Carbon black for hot & cold water supply, capable to
withstand temperature up to 800c including all special composite fittings
(engineering plastic blend and brass inserts wherever required) e.g. elbows,
tees, reduces, couplers & connectors ect., with cement tranching at 1.00
meter depth including testing complete as required. (External work).
13.89 Providing and fixing polished granite sink of size 60cms x 75cms of 23cm Each 5856.00
thick, the sink portion shall be 15cm in depth of shapes oval/round/square
over brick masonry in cement mortar 1:6 including cost and conveyance of
all materials, labour for all items of work, HOM of equipment with all lead
and lift, loading and unloading, transportion charges and all other incidental
charges etc., complete as per specification and direction of the Engineer-in-
charge of the work.
13.90 Providing and fixing polished granite sink of size 60cms x 60cms of 23cm Each 4743.00
thick, the sink portion shall be 15cm in depth of shapes oval/round/square
over brick masonry in cement mortar 1:6 including cost and conveyance of
all materials, labour for all items of work, HOM of equipment with all lead
and lift, loading and unloading, transportion charges and all other incidental
charges etc., complete as per specification and direction of the Engineer-in-
charge of the work.
Rate
Sl. No. Description Unit
Rs. Ps.
13.91 Providing and Fixing stainless Steel sink of sizes upto 60cms x 45cms of 20cm Each 605.00
thick granite slab of by cutting required thickness and width of grooves and
fixing using adhesives etc., complete including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and
lift, loading and unloading, transportion charges and all other incidental
charges etc., complete as per specification and directions of the Engineer-in-
charge of the work.
13.92 Cutting granite slab upto 40mm thick and required width of grooves for
fixing stainless steel sink and fixing using adhesives.
13.92.1 -do- for fixing Stainless Steel sink upto 60cm x 45 cms No. 473.70
13.92.2 -do- for fixing Stainless Steel sink above 60cm x 45 cms No. 710.60
13.93 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings
including brass threaded polypropelence random fittings including chasing
the walls.
External Plumbing
13.95.1 20mm pipe outer dia (3 layer) m 120.00
13.95.2 25mm pipe outer dia (3 layer) m 170.00
13.95.3 32mm pipe outer dia (3 layer) m 210.00
13.95.4 40mm pipe outer dia (3 layer) m 290.00
13.95.5 50mm pipe outer dia (3 layer) m 520.00
13.95.6 63mm pipe outer dia (3 layer) m 660.00
13.95.7 75mm pipe outer dia (3 layer) m 820.00
13.95.8 90mm pipe outer dia (3 layer) m 1250.00
13.95.9 110mm pipe outer dia (3 layer) m 1320.00
13.95.10 160mm pipe outer dia (3 layer) m 2450.00
Flooring
14.0 FLOORING
14.1 KSRB-14.1: Providing and laying flooring with burnt stone slabs 10 cms Sqm 740.50
thick, rough chistle dressed on sand bed 7.5 cms to 8cms thick and pointed
with cement mortar 1:3, including cost of materials, labour, curing complete
as per specifications.
14.10 KSRB-14.7-3: Providing and laying flooring 40mm thick, with an under layer Sqm 428.30
of 30mm thick M-15 cemente concrete, using broken granite metal of
12.5mm nominal size and top layer of 10mm thick plaster with cement
mortar 1:3 finished with floating coat of neat cement, including cost of
materials, labour, curing, complete as per specifications.
Specification No.KBS
14.16 KSRB-14.10-2: Flooring with 25mm to 40mm thick polished shahabad slabs Sqm 1046.00
using cement mortar 1:6, 25mm thick over existing cement concrete bed or
top of roof laid to line and level and jointed with cement slurry mixed with
pigment to match the shade of the slab, including cost of materials, labour,
curing polishing complete as per specifications.
Specification No.KBS
14.17 KSRB-14.10-3: Providing flooring with 25mm to 40mm thick polished Sqm 964.00
Cadapa slabs using cement mortar 1:6, 25mm thick over existing cement
concrete bed or top of roof laid to line and level and jointed with cement
slurry mixed with pigment to match the shade of the slab, including cost of
materials, labour, curing polishing complete as per specifications.
Specification No.KBS
Rate
Sl. No. Description Unit
Rs. Ps.
14.18 KSRB-14.11-1: Providing mosaic flooring with cast-in-situ 40mm thick using Sqm 1071.00
marble chips flooring rubbed and polished to granolithic finish with under
layer of 28mm thick cement concrete M-15 with stone aggregate 12mm and
down size, and top layer 12mm thick with dark shade pigment with ordinary
with ordinary cement in top layer only using white, black, chacolate, yellow
or baroda green marble chips of size from 7 to 10 nominal size laid in cement
marble powder mix 3:1 (3cement : 1 marble powder by weight) in
proportion of 4:7 (4 cement marble powder mix :7 marble chips by volume)
curing polishing oxalic acid wash, wax polish, including cost of materials,
labour, complete as per specifications.
14.19 KSRB-14.11-2: Providing mosaic flooring with cast-in-situ 40mm thick using Sqm 1196.00
marble chips flooring, rubbed and polished to granolithic finish with under
layer of 28mm thick cement concrete M-15 with stone aggregate 12mm and
down size, and top layer 12mm thick with light shade pigment with white
cement in top layer using white, black, chacolate, yellow or baroda green
marble chips of size from 7 to 10 nominal size laid in cement marble stone
powder mixed 3:1 (3 cement : 1 marble powder by weight) in proportion of
4:7 (4 cement marble powder mix :7 marble chips by volume) curing
polishing oxalic acid wash, wax polish, including cost of materials, labour,
complete as per specifications.
14.20 KSRB-14.11-3: Providing mosaic flooring with cast-in-situ 40mm thick using Sqm 1105.00
marble chips flooring, rubbed and polished to granolithic finish with under
layer of 28mm thick cement concrete M-15 with stone aggregate 12mm and
down size, and top layer 12mm thick with medium shade pigment with
approximately 50% white cement and 50% ordinary cement in top layer
only using white, black, chacolate, yellow or baroda green marble chips of
size from 7 to 10 nominal size laid in cement marble stone powder mixed 3:1
(3 cement : 1 marble powder by weight) in proportion of 4:7 (4 cement
marble powder mix :7 marble chips by volume) curing polishing oxalic acid
wash, wax polish, including cost of materials, labour, complete as per
specifications.
14.22 KSRB-14.11-5: Extra for providing and fixing alumium strips 40mm wide and Sqm 28.35
1.5mm thick painted with a protective coat of bitumen for joints of mosaic
floors, including cost of materials, labour, curing, complete as per
specifications.
Specification No.KBS
Rate
Sl. No. Description Unit
Rs. Ps.
14.23 KSRB-14.11-6: Extra for providing and fixing glass strips 40mm wide and Sqm 39.40
4mm thick for joints of mosaic floors, including cost of materials, labour,
curing, complete as per specifications.
Specification No.KBS
14.24 KSRB-14.12-1: Providing mosaic tiles flooring with precast grey colour Sqm 659.80
mosiac tiles 20mm thick using marble chips of approved colour 7 to 10
nominal size laid in floors and landings on a bed of 25mm thick cement
mortar 1:6 mix, jointed with neat cement slurry mix with pigment to match
the shade of tiles curing, rubbing, polishing, oxalic acid wash, wax polish,
including cost of materials, labour, HOM of machinery complete as per
specifications.
14.27 KSRB-14.12-4: Providing mosaic tiles flooring with white precast cement Sqm 695.00
mosaic tiles 20mm thick using marble chips of 7 to 10 nominal size laid in
floors and landings on a bed of 25mm thick average thickness of cement
mortar 1:6, mix, jointed with neat cement slurry mix with pigment to match
the shade of tiles curing, rubbing, polishing, oxalic acid wash, wax polish,
including cost of materials, labour, HOM of machinery complete as per
specifications.
14.28 KSRB-14.13-1: Providing precast chequered mosaic tiles dark shade using Sqm 853.00
ordinary grey cement for steps and flooring, with precast 20mm thick, using
marble chips of 7 to 10 nominal size laid in floors, steps and landings on a
bed of 12mm thick cement mortar 1:3 mix, and jointed with neat cement
slurry mixed with pigment to match the shade of tiles curing, rubbing,
polishing, oxalic acid wash, wax polish, including cost of materials, labour,
complete as per specifications.
14.29 KSRB-14.13-2: Providing precast chequered mosaic tiles light shade using Sqm 965.00
white cement for steps and flooring, 20mm thick, using marble chips of 7 to
10 nominal size laid in floors, steps and landings on a bed of 12mm thick
cement mortar 1:3 mix, and jointed with neat cement slurry mixed with
pigment to match the shade of tiles curing, rubbing, polishing, oxalic acid
wash, wax polish, including cost of materials, labour, complete as per
specifications.
14.30 KSRB-14.13-3: Providing precast chequered mosaic tiles medium shade Sqm 920.00
pigment using 50% white cement and 50% ordinary cement for steps and
flooring, 20mm thick, using marble chips of 7 to 10 nominal size laid on a bed
of 12mm thick cement mortar 1:3 mix, and jointed with neat cement slurry
mixed with pigment to match the shade of tiles curing, rubbing, polishing,
oxalic acid wash, wax polish, including cost of materials, labour, complete as
per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
Specifications No. KBS 14.13 14.14
14.31 KSRB-14.13-4: Providing precast chequered mosaic tiles white colour for Sqm 1025.50
steps and flooring, 20mm thick, using marble chips of 7 to 10 nominal size
laid on a bed of 12mm thick cement mortar 1:3 mix, and jointed with neat
cement slurry mixed with pigment to match the shade of tiles curing,
rubbing, polishing, oxalic acid wash, wax polish, including cost of materials,
labour, complete as per specifications.
14.33 KSRB-14.14-2: Providing colour glazed tiles all sizes 10mm thick for flooring, Sqm 836.00
treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3
mix, flush pointing using white cement with matching colour pigment,
including cost of materials, labour, curing, complete as per specifications.
Specifications No. KBS 14. 15.2
14.34 KSRB-14.14-3: Providing white glazed tiles all sizes 6mm thick for flooring, Sqm 751.80
treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3
mix, flush pointing using white cement, including cost of materials, labour,
curing, complete as per specifications.
14.36.3 -do- for Ceramic Tiles 400x400mm on a bed of 20 mm thick Sqm 1039.00
14.37 KSRB-14.15-1: Providing marble slab flooring 20mm thick with edges of slab Sqm 2993.00
machine cut, for flooring, treads of steps and landings laid on a bed of 25mm
thick, cement mortar 1:6 mix, to line and level, jointed with cement slurry
curing, rubbing, polishing complete finishing with flush pointing using white
cement, including cost of materials, HOM of machineries labour, curing,
complete as per specifications.
Note: While preparing analysis the quality of slab should be clearly noted
namely white marble, adanga marble, makranda etc., and also size of slab
should be noted clearly.
Specification No. KBS 14.18
14.38 KSRB-14.16-1: Providing skirting upto 30 cms, height with cement mortar Sqm 220.70
1:3 finished with a floating coat of neat cement including rounding off
junctions floor, overall 15mm thick including cost of materials, labour,
complete as per specifications.
14.41 KSRB-14.17-2: Providing skirting, dado, rises of steps with colour glazed tiles
on 10mm thick cement plaster 1:3 and jointed with white cement slurry over
rough plaster surface (exceeding cost of rough plastered surface which
should be measured and paid separately) using, glazed tiles of approved
make and size including cost of materials, labour, complete as per
specifications.
14.41.3 Colour glazed tiles 30x45 cms 6mm thick with border of size 30 x 10 cms. Sqm 1192.50
14.42 KSRB-14.18-1: Providing skirting, dado, rises of steps with marble slabs not Sqm 3113.00
exceeding 30cms, height on 10cms, thick cement mortar 1:3 and jointed with
white cement slurry over rough plaster surface (exceeding cost of rough
plastered which should be measured and paid separately) using, marble slab
with machine cut edges upto 25 cms. thick including cost of materials,
labour, complete as per specifications.
14.44 Providing flooring with 60 cms x 60 cms, size Vitrified glazed tiles of Sqm 1231.50
approved quality and make, fixed on top of existing flooring with suitable
adhesive, including cutting the tiles to the required size and fixing etc.,
complete.
14.45 Providing Vitrified glazed 60 x 60 cms of approved make, shade and size for Sqm 1122.00
flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing
with white cement using colour pigment, including cost of materials, labour,
curing complete as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
14.46 Providing and laying pattern flooring for staircase treads and rises using the Sqm 6922.00
combination of 20mm thick ruby red granite @66%, 20mm thick grey
granite @20%, 20mm thick Shiva gold granite 7%, 20mm thick black granite
7%. The granite materials are laid on existing bed of CM 1:3 20mm thick
pointed with colour pigment, including full rounding for nosing, flaming the
ruby red granite for 50 mm wide curing etc., complete.
14.47 Providing and laying flooring using prepolished, water cut/gang saw 19mm
thick granite laid over existing floor in CM 1:4 at 20mm thick (average) and
pointed with white / grey pigment etc., complete.
14.47.1 #NAME? Sqm 1956.00
14.47.2 #NAME? Sqm 3543.00
14.47.3 -do- using 10mm thick grey granite Sqm 1225.00
14.47.4 -do- using 10mm thick black granite Sqm 1477.00
14.47.5 #NAME? Sqm 3005.00
14.47.6 #NAME? Sqm 2821.00
14.48 Providing and laying flooring for corridors/lobbies using combination of pre
polished 19mm thick water cut/gang saw Grey Granite, Black Granite, and
strips of 50mm wide pre flammed grey granite using pre polished grey
granite 19mm thick 76%, pre polished black granite 19mm thick @2% and
preflamed 19mm thick grey granite @22% over existing cement concrete
bed in CM 1:4 average 20mm thick pointed with white cement/colour
pigment etc., complete.
14.50 Providing and fixing skirting of 300mm high using prepolished water m 749.00
cut/gang saw of 19mm thick grey granite 0.5mm wide chamfered width and
depth and fixing in CM 1:4 of 20mm thick after chipping the walls etc.,
complete.
14.51 Providing and laying Hassan Green granite flooring for staircase, treads and Sqm 4037.00
rises using pre polished 20mm thick water cut green Granite slab laid over
existing cement concrete bed in CM 1:3, average 20 mm thick including full
rounding for nosing, cutting 3 line grooves not more than 3mm wide for
antiskidding, curing etc., complete.
14.52 Providing and laying platform using prepolished, water cut/gang saw 40mm Sqm 3795.00
thick telephonic Black Granite. laid on existing vertical supports and fixing in
CM 1:3 proportion, incluiding cutting to required shape, pattern with paper
joints, including full rounding for nosing, finished with cement mortar,
pointed with colour pigments to match the colour of slab making through
jointing with sealant, making holes 25mm x12mm grooves in joints including
curing.
14.53 Providing full nosing for 40mm thick granite slab using required machinery m 369.60
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification.
14.54 Providing half nosing for 40mm thick granite slab using required machinery m 246.45
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
14.55 Providing full nosing for 20mm thick granite slab using required machinery m 184.80
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification.
14.56 Providing half nosing for 20mm thick granite slab using required machinery m 123.20
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification.
14.57 Providing and fixing 40mm thick sadarhalli grey flammed granite slab for Sqm 1994.00
bath areas in Bathrooms over a bed of 25mm thick CM 1:6 and fixing granite
slab with CM 1:3.
14.58 Providing and fixing granite flooring in combination of 19mm thick (Avg) Sqm 5656.00
gang saw water cut LAKARED granite with 86% and with 14% of 19mm
thick (avg) Black granite in CM 1:4 proportion with a coat of rough
plastering using CM 1:4, cut to required shape, pattern with paper joints,
finished with cement mortar using white cement and colour pigments to
match the colour of slab making through jointing with sealant, grooves in
joints including cost of curing etc., complete including cost and conveyance of
all materials, labour for all items of work, HOM of equipment etc., complete
as per specification.
14.59 Providing and fixing 20mm thick gang saw water cut telephonic black Sqm 2392.00
granite in CM 1:4 proportion with a coat of rough plastering using CM 1:4,
cut to required shape, pattern with paper joints, finished with cement mortar
using white cement and colour pigments to match the colour of slab making
through jointing with sealant, grooves in joints including cost of curing etc.,
complete including cost and conveyance of all materials, labour for all items
of work, HOM of equipment etc., complete as per specification.
14.60 Providing and fixing 20mm thick gang saw water cut LAKARED granite in Sqm 5523.00
CM 1:4 proportion with a coat of rough plastering using CM 1:4, cut to
required shape, pattern with paper joints, finished with cement mortar using
white cement and colour pigments to match the colour of slab making
through jointing with sealant, grooves in joints including cost of curing etc.,
complete including cost and conveyance of all materials, labour for all items
of work, HOM of equipment etc., complete as per specification.
14.61 Providing and fixing 20mm thick gang saw water cut Sadarhalli grey granite Sqm 2144.00
in CM 1:4 proportion, cut to required shape, pattern with paper joints,
finished with cement mortar using white cement and colour pigments to
match the colour of slab making through jointing with sealant, grooves in
joints including cost of curing.
14.62 Providing and laying/fixing cement base, precast, pre polished cement Sqm 972.30
concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles
for flooring, treads of steps and landing, laid on a bed of 12mm thick cement
mortar 1:3 mis finished with flush pointing using white cement, including
cost of materials, including cutting, griding the edge to half/full round
wherever required, labour, curing complete as per specification.
14.63 Providing and fixing Ceramic tiles of size 400x400mm for flooring, threads, Sqm 956.50
steps and landing,laid on a bed of 20mm thick cement mortar 1:3 mix flush
pointing with white cement mixed with matching colour pigment including
curing, cleaning etc., complete. The work includes cost of all materials,
labour charges for all items of work, hire charges for equipment, etc.,
complete as specification.
Rate
Sl. No. Description Unit
Rs. Ps.
14.64 Providing and fixing colour glazed tiles of size 300mmx600mm for walls with Sqm 1052.00
borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with
white cement with matching colour pigment with necessary curing, cleaning
including providing and removing scaffolding wherever necessary etc.,
complete. The work includes cost of all materials, labour charges for all items
of work, hire charges for equipment, etc.,complete as per specification.
14.65 Providing and fixing colour glazed tiles of size 300mmx450mm for walls with Sqm 853.50
borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with
white cement with matching colour pigment with necessary curing, cleaning
including providing and removing scaffolding wherever necessary etc.,
complete. The work includes cost of all materials, labour charges for all items
of work, hire charges forequipment, etc., complete as per specification.
14.66 Providing and laying heavy duty cobble stones 80mm thick interlock pavers,
using cement and course sand for manufacture of block of approved size,
shape and colour with a minumum compressive strength of 281kg per sqm
over 50mm thick sand bed (average thickness) and compacting with plate
vibrator having 3 tons compaction force thereby forcing part of sand
underneath to come up in between joints, final compaction of paver surface
joints into its final level, including cost of materials, labour and HOM of
machineries complete as per specification.
14.68 Providing and fixing of clay tiles for cladding tiles of size 230 x 75 x 10 mm Sqm 1630.00
thick on 12 mm thick cement mortar 1:3 and jointed with adhesive/cement
slurry over rough plaster surface excluding cost of rough plaster surface and
the surface is painted with red apex paint and block apex paint in to the
groves.
14.69 Supplying fabricating and fixing of stainless steel cladding for walls using Sqm 12600.00
304 grade stainless steel 16 gauge sheet wall cladding of thickness over the
frame made out of 50 x 50 x 3 mm thickness anodized aluminium frame work
at an equal distance of 2 ft vertifically fixed to the wall using 100 mm screws,
guttas, anchor bolts and fastners with all necessary bending and cutting as
per the designing and site condition. The frame work finally to be finished
with 12 mm BWP plywood to receive the SS sheet on it uniformly.
14.70 Providing and laying of teak wooden polished flooring of 12 mm thick, high Sqm 4800.00
density timber of approved colour and design with end trims, transition,
profiles, beading, 15 mm thick felt, and 20 micron polyester film with 4 mm
thick foam underlay etc.
14.71 Providing and laying of Modular wooden polished flooring of 12mm thick, Sqm 2800.00
high density timber of approved colour and design with end trims, transition,
profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm
thick foam underlay etc.
14.72 Providing Venyl flooring of approved quality and make, fixed on the top of Sqm 600.00
existing flooring fixed with suitable adhesive, including cutting to the
required size and fixing etc., complete.
Rate
Sl. No. Description Unit
Rs. Ps.
Note: Lift charges : The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.1.50/sqm per floor may be added
for every additional floor for items vide Sl.No. 14.1 to 14.51.
Finishing Work
Rate
Sl. No. Description Unit
Rs. Ps.
15.9 KSRB 15.3.1 Providing 12mm thick cement plaster in single coat with cement Sqm 147.25
mortar 1:3, to brick masonry including rounding off corners wherever
required smooth rendering, : Providing and removing scaffolding, including
cost of materials, labour, curing complete as per specifications.
15.23 KSRB 15.4.1: Extra for providing and mixing waterproofing compound in Sqm 7.50
cement plaster work at one kg per bag or in the proportion recommended by
the manufactures, for cement mortar 1:3, 12mm thick cost of materials
complete as per specifications.
15.24 KSRB 15-4.2 : -do- cement mortar 1:4, 12mm thick Sqm 5.55
15.25 KSRB 15-4.3 : -do- cement mortar 1:4, 15mm thick Sqm 7.05
15.26 KSRB 15-4.4 : -do- cement mortar 1:4, 18mm thick Sqm 8.45
15.27 KSRB 15.4.5: Extra for providing and mixing waterproofing compound in Sqm 9.40
cement plaster for stone work at one kg per bag or in the proportion
recommended by the manufactures, for cement mortar 1:4, 20mm thick cost
of materials complete as per specifications.
15.28 KSRB 15.4.6: Extra for providing and mixing waterproofing compound in Sqm 12.50
cement plaster for brick masonry work at one kg per bag or in the
proportion recommended by the manufactures, for cement mortar 1:3,
20mm thick cost of materials complete as per specifications.
15.29 KSRB 15.4.7: Extra for providing and mixing waterproofing compound in Sqm 9.40
cement plaster for brick masonry work at one kg per bag or in the
proportion recommended by the manufactures, for cement mortar 1:4,
20mm thick cost of materials complete as per specifications.
15.3 KSRB 15.5.1: Providing rough cement plastering 15mm thick in single coat Sqm 143.50
with cement mortar 1:4, to brick masonry for base of dadooing works with
sand of approved quality, provided and removing scaffolding, including cost
of materials, labour, curing complete as per specifications.
15.34 KSRB 15.8.1 : Providing and fixing plaster mesh 100mm wide manufactured m 28.15
out of hot dipped galvanised iron of nominal thickness 0.35 mm with a zinc
coating of 120 gms per sqm width, along route of walls chipped for services,
junction between RCC and brick walls including cost of materials, labour for
fixing complete as per specifications. (length of mesh only be measured for
payment)
15.38 KSRB 15.10.1 : Providing white washing to new wall surface in two coats Sqm 6.00
with lime of approved quality, to give an even shade including cost of
materials, labour, complete as per specifications.
15.39 KSRB 15.10.2 : Providing white washing for every one additional coat with Sqm 2.80
lime of approved quality, to give an even shade including cost of materials,
labour, complete as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
15.40 KSRB 15.10.3 : Providing white washing to ceiling and / or slopping roof Sqm 6.50
surface in two coats with lime of approved quality, to give an even shade
including cost of materials, labour, complete as per specifications.
15.41 KSRB 15.10.4 : Providing white washing to ceiling and / or slopping roof Sqm 3.25
surface with additional one coat with lime of approved quality, to give an
even shade including cost of materials, labour, complete as per specifications.
15.42 KSRB 15.11.1 : Providing cement washing to rough wall surface in one coat Sqm 5.50
with portland cement slurry to give an even shade after throughly brooming
the surface to remove all dirt, mortar drops and other foreign matter
including cost of materials, labour, complete as per specifications.
15.43 KSRB 15.11.2 : Providing cement washing on iron surface in one coat with Sqm 50.05
portland cement slurry mixed with boiled linseed oil to give an even shade
after throughly cleaning the surface to remove all dirt, mortar drops and
other foreign matter including cost of materials, labour, complete as per
specifications.
15.44 KSRB 15.12.1 : Providing Gopal colour washing to new wall surface in two Sqm 8.35
coats with lime and gopal colour of approved quality, to give an even shade
after throughly brooming the surface to remove all dirt, mortar drops and
other foreign matter including cost of materials, labour, complete as per
specifications.
15.45 KSRB 15.12.2 : Providing Gopal colour washing to new wall surface in one Sqm 4.45
coat with lime and gopal colour of approved quality, to give an even shade
after throughly brooming the surface to remove all dirt, mortar drops and
other foreign matter including cost of materials, labour, complete as per
specifications.
15.47 KSRB 15.13.3: Providing and applying two coats dry distemper of of
approved brand, and shade on wall surface including priming coat and
whitening after throughly brooming the surface to remove all dirt, dust,
mortar drops and other foreign matter including preparing the surface, even
and sand paper smooth, cost of materials, labour, complete as per
specifications.
15.49 KSRB 15-14.1 : Providing and applying two coats with oil bound washing
distemper of approved brand and shade on wall surface including priming
coat with distemper primer after throughly brooming the surface free
mortar drops and other foreign matter including preparing the surface even
and sand paper smooth, cost of materials, labour, complete as per
specifications.
15.51 KSRB 15-15.1 : Providing and applying painting in two coats with plastic
emulsion paint of approved brand on wall surface to give an even approved
shade after throughly brooming the surface, free from mortar drops and
other foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour, complete as per specifications.
15.53 KSRB 15-16.1 : Providing and finishing external walls in two coats with
waterproof cement paint of approved brand and shade to give an even shade
after throughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
15.54 KSRB 15-16.2 : Providing and finishing external walls in one coat with
waterproof cement paint of approved brand and shade to give an even shade
after throughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
15.55 KSRB 15-17.1: Applying priming coat over new wood surface and / or wood Sqm 27.70
based surface with white lead paint priming including preparing the surface
after throughly cleaning oil, grease, dirt and foreign matter, sand papering
and knotting ready mix paint including cost of materials, labour, complete as
per specifications.
15.56 KSRB 15-17.2 : Applying priming coat over new wood surface and / or wood Sqm 25.60
based surface after brushing with wood primer pink paint including
preparing the surface after throughly cleaning oil, grease, dirt and foreign
matter, sand papering and knotting ready mix paint including cost of
materials, labour, complete as per specifications.
15.57 KSRB 15-17.3 : Applying priming coat over new wood surface and / or wood Sqm 26.90
based surface after brushing with aluminium paint primer, water resistant
including preparing the surface after throughly cleaning oil, grease, dirt and
foreign matter, sand papering and knotting ready mix paint including cost of
materials, labour, complete as per specifications.
15.58 KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood Sqm 25.60
based surface after brushing with ready mix enamel priming paint including
preparing the surface after throughly cleaning oil, grease, dirt and foreign
matter, sand papering and knotting ready mix paint including cost of
materials, labour, complete as per specifications.
15.59 KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood Sqm 28.50
based surface after preparing the surface after throughly cleaning oil,
grease, dirt and foreign matter, sand papering and knotting liquid wood
filler, for varnish including cost of materials, labour, complete as per
specifications.
15.6 KSRB 15-17.6 : Providing and applying painting two coats (excluding
priming coat) on new wood surface and / or wood based surface with
enamel paint to give an even shade, cleaning surface of all dirt, dust, and
foreign matter, sand papering including cost of materials, labour, complete
as per specifications.
15.62 KSRB 15-17.9 : Applying varnish two coats (excluding priming coat) on new
wood surface and / or wood based surface undercoating with flatting
varnish and finishing coat with varnish to give an even shade after cleaning
surface of all dirt, dust, and foreign matter, sand papering so as to produce
smooth dry, mat surface including cost of materials, labour, complete as per
specifications.
15.63 KSRB 15-17.10: Providing and applying varnishing one coat (excluding
priming coat) on previously varnished wood /or wood based surface to give
an even surface after cleaning the surface of all dirt, dust and foreign matter,
sand papering so as to produce a smooth dry and mat surface, including cost
of materials, labour, complete as per specifications.
15.64 KSRB 15-17.12: Providing and applying polishing with french polish on new Sqm 102.30
wood surface and / or wood based surface to give an even surface after
cleaning the surface of all dirt, dust and foreign matter, sand papered
smooth, including cost of wood filler and materials, labour, complete as per
specifications.
15.65 KSRB 15-17.13: Providing and applying polishing with french polish over Sqm 52.85
previously polished wood or wood based surface to give an even surface after
cleaning the surface of all dirt, dust and foreign matter, sand papered
smooth, including cost of wood filler and materials, labour, complete as per
specifications.
15.66 KSRB 15-17.14: Providing and applying wax polish in two coats on new wood Sqm 48.70
surface and /or wood based surface, with bees wax polish in proportion of
2:1.5:1:0.5 (2 bees wax : 1.5 linseed oil : 1turpentine oil :0.5 varnish by
weight) to give an even surface after cleaning the surface of all dirt, dust and
foreign matter, sand papered smooth, including cost of materials, labour,
complete as per specifications.
15.67 KSRB 15-17.15: Providing and applying wax polish in single coat on new Sqm 24.35
wood surface and /or wood based surface, with bees wax polish in
proportion of 2:1.5:1:0.5 (2 bees wax : 1.5 linseed oil : 1turpentine oil :0.5
varnish by weight) to give an even surface after cleaning the surface of all
dirt, dust and foreign matter, sand papered smooth, including cost of
materials, labour, complete as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
15.68 KSRB 15-17.16: Providing and applying painting two coats (excluding Sqm 28.35
priming coat) on new wood surface and / or wood based surface with coal
tar paint to give an even shade after cleaning the surface of all dirt, dust and
foreign matter, including cost of materials, labour, complete as per
specifications.
15.69 KSRB 15-17.17: Providing and applying painting one coat (excluding Sqm 18.70
priming coat) on new wood surface and / or wood based surface with coal
tar paint to give an even shade after cleaning the surface of all dirt, dust and
foreign matter, including cost of materials, labour, complete as per
specifications.
15.70 KSRB 15-17.18: Providing and applying painting one coat (excluding Sqm 15.90
priming coat) on previously painted wood surface and / or wood based
surface with coal tar paint to give an even shade after cleaning the surface of
all dirt,dust and foreign matter, including cost of materials, labour, complete
as per specifications.
15.71 KSRB 15-17.19: Providing and applying painting one coat (excluding Sqm 26.70
priming coat) on previously painted wood surface and / or wood based
surface with black japan paint to give an even shade after cleaning the
surface of all dirt,dust and foreign matter, including cost of materials,
labour, complete as per specifications.
15.72 KSRB 15-17.20: Applying additional one coat (excluding priming coat) on Sqm 23.90
previously painted wood surface and / or wood based surface with black
japan paint to give an even shade after cleaning the surface of all dirt,dust
and foreign matter, including cost of materials, labour, complete as per
specifications.
15.73 KSRB 15-18.1: Applying red lead ready mix priming coat over new steel or Sqm 23.60
other metal surface including preparing the surface after throughly cleaning
oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine
steel wool, sand papers including cost of materials, labour, complete as per
specifications.
15.74 KSRB 15-18.2: Providing and applying enamel metal paint two coats Sqm 72.00
(excluding priming coat) over new steel or other metal surface brushes to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.
15.75 KSRB 15-18.3 : Providing and applying enamel metal paint one coat Sqm 45.00
(excluding priming coat) on previously painted steel or other metal surface
brushing to give an even shade after cleaning oil, grease, dirt and other
foreign matter, including cost of materials, labour, complete as per
specifications.
15.76 KSRB 15-18.4 : Providing and applying alluminium paint two coats Sqm 45.00
(excluding priming coat) over new steel or other metal surface brushing to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.
15.77 KSRB 15-18.5 : Providing and applying alluminium paint one coat (excluding Sqm 28.25
priming coat) on previously painted steel or other metal surface brushing to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.
15.78 KSRB 15-18.6 : Providing and applying black japan paint one coat (excluding Sqm 26.50
priming coat) on previously painted steel or other metal surface brushing to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
15.79 KSRB 15-18.7 : Extra for applying every subsequent black japan paint on Sqm 23.70
previously painted steel or other metal surface brushing to give an even
shade after cleaning of oil, grease, dirt and other foreign matter, including
cost of materials, labour, complete as per specifications.
15.80 KSRB 15-19.1 : Providing and applying ready mix priming coat over concrete Sqm 21.75
/ masonry / asbestos cement sheet / plastered surfaces including preparing
the surface after thoroughly cleaning of oil, grease, dirt and other foreign
matter, and sand papering including cost of materials, labour, complete as
per specifications.
15.81 KSRB 15-19.2 : Providing and applying spray painting in two coats(excluding Sqm 56.00
priming coat) over concrete / masonry / asbestos cement sheet / plastered
surfaces with flat wall paint of approved brand to give even shade after
cleaning the surface of all dirt dust and other foreign matter, and sand
papering including cost of materials, labour, complete as per specifications.
15.82 KSRB 15-19.3: -do- spray painting in one coat Sqm 35.15
15.83 KSRB 15-20.1 : Providing and applying floor painting with ready mix paint in Sqm 40.70
two coats (excluding priming coat) on new concrete / asbestos cement
sheet / plastered surfaces brushing to give an even shade after preparing the
surface after thoroughly cleaning of oil, dirt, dust other foreign matter, and
sand papering including cost of materials, labour, complete as per
specifications.
15.86 KSRB 15-21.2: -do- previously polished concrete floor Sqm 20.75
15.87 KSRB 15-22.1 : Providing marble chips skirting or dado (upto 30 cms height) Sqm 911.00
rubbed and polished to granolithic finish, top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size dark shade pigment with ordinary cement (in top layer
only) laid in cement marble powder 3:1 (3 cement : 1 marble powdered by
weight) in proportion of 4:7 (4 cement marble powder mix :7 marble chips
by volume) overall thickness 24 mm (18mm thick under layer, 6mm thick top
layer) in cement mortar of mix 1:3 including cost of materials, labour,
complete as per specifications.
15.88 KSRB 15-22.2 : Providing marble chips skirting or dado (upto 30 cms height) Sqm 963.00
rubbed and polished to granolithic finish, top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size light shade pigment with white cement (in top layer only)
laid in cement marble powder 3:1 (3 cement : 1 marble powder by weight) in
proportion of 4:7 (4 cement marble powder mix :7 marble chips by volume)
overall thickness 24 mm (18mm thick under layer, 6mm thick top layer) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
15.89 KSRB 15-22.3 : Providing marble chips skirting or dado (upto 30 cms height) Sqm 945.00
rubbed and polished to granolithic finish, top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size, medium shade pigment with approximately 50% white
cement and 50% ordinary cement (in top layer only) laid in cement marble
powder 3:1 (3 cement : 1 marble powder by weight) in proportion of 4:7 (4
cement marble powder mix :7 marble chips by volume) overall thickness 24
mm (18mm thick under layer, 6mm thick top layer) in cement mortar of mix
1:3 including cost of materials, labour, complete as per specifications.
15.90 KSRB 15-22.4 : Providing marble chips skirting or dado (upto 30 cms height) Sqm 897.50
rubbed and polished to granolithic finish, top layer 6mm thick with white,
black, chocolate, grey, yellow or baroda green marble chips from smallest to
4mm nominal size, white cement without any pigment (in top layer only) laid
in cement marble powder 3:1 (3 cement : 1 marble powder by weight) in
proportion of 4:7 (4 cement marble powder mix :7 marble chips by volume)
overall thickness 24 mm (18mm thick under layer, 6mm thick top layer) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.
15.91 KSRB 15-22.5 : Extra labour for work in dado exceeding 30 cms in height Sqm 14.00
including cost of labour, complete as per specifications.
15.92 KSRB 15-23.1 : Providing pre-cast grey colour mosaic tiles 20mm thick with m 235.30
marble chips of white, black, chocolate, grey, yellow or baroda green from
smallest to 6mm nominal size, with ordinary cement (in top layer only) for
skirting and rises of steps (not exceeding 30cms height) on 10cms thick
cement mortar 1:3 jointed with neat cement slurry, rubbed and polished to
granolithic finish, including cost of materials, labour, complete as per
specifications.
15.93 KSRB 15-23.2 : Providing pre-cast mosaic tiles using light shade pigment m 295.30
with white cement 20mm thick with marble chips of white, black, chocolate,
grey, yellow or baroda green from smallest to 6mm nominal size, with
ordinary cement (in top layer only) for skirting and rises of steps (not
exceeding 30cms height) on 10cms thick cement mortar 1:3 jointed with neat
cement slurry, rubbed and polished to granolithic finish, including cost of
materials, labour, complete as per specifications.
15.94 KSRB 15-23.3 : Providing pre-cast mosaic tiles using medium shade pigment m 241.25
using approximately 50% white cement and 50% ordinary cement 20mm
thick with marble chips of white, black, chocolate, grey, yellow or baroda
green from smallest to 6mm nominal size, with ordinary cement (in top layer
only) for skirting and rises of steps (not exceeding 30cms height) on 10cms
thick cement mortar 1:3 jointed with neat cement slurry, rubbed and
polished to granolithic finish, including cost of materials, labour, complete as
per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
15.95 KSRB 15-23.4 : Providing pre-cast mosaic tiles white shade with white m 197.60
cement without any pigment 20mm thick with marble chips of white, black,
chocolate, grey, yellow or baroda green from smallest to 6mm nominal size,
with ordinary cement (in top layer only) for skirting and rises of steps (not
exceeding 30cms height) on 10cms thick cement mortar 1:3 jointed with neat
cement slurry, rubbed and polished to granolithic finish, including cost of
materials, labour, complete as per specifications.
15.96 Providing melamine polishing of approved shade including removing and Sqm 606.00
refixing of doors shutters scraping with blade and rubbing with zero size
sand paper and applying sealer coat by way of spraying with necessary
compressor and applying patty after rubbing with steel wool including two
coats of approved shade of melamine polish etc., complete.
15.97 Providing melamine polishing of approved shade including removing and Sqm 772.80
refixing of doors shutters, glass, beading and existing polishing, scraping
with blade and rubbing with zero size sand paper and applying sealer coat
by way of spraying with necessary compressor and applying patty after
rubbing with steel wool including two coats of approved shade of melamine
polish etc., complete.
15.98 Providing and mixing Synthetic fibers 100% Virgin traingular monofilament
polyster fibers 6mm in cut length for use as micro reinforcement for
application at 125grams per bag of cement. i.e., 0.25% by weight of cement.
15.1 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin
polypropylene fibers contains no olefin materials and are specially
engineered manufactured to use as cementitious micro reinforcement.
Application @125 gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200
gms for 1:6 CM mix per bag of cement in both coats of the plaster. Harbourite
12mm long shall be used in the back coat and Harbourite 6mm long fibers
shall be used in the top coat. Fibermesh Harbourite fibers should be
confirming to ASTM C 1116 ACI ACI 524-93.
15.103 Providing external walls with texture finish using approved brand paint, Sqm 245.90
applied uniformly in three coats over one coat of primer including cost of all
materials, machineries, labour, transportation, loading and unloading, all
lead and lift and all other incidental charges including scaffolding and
removing stains, complete as per specifictions.
15.104 Providing and finishing external walls in two coats over one coat of primer Sqm 124.00
with antifungal paint of approved brand and shade to give an even shade
after thoroughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
15.105 Providing textures paint of approved quality, colour and shade to wall Sqm 301.20
surface after cleaning and rubbing the wall surface with wire brush of
medium size emery stone to remove all the loosely adhering particles, the
surface is then cleaned with water and ensured that it is in line and level. The
textured materials is then mixed with 40-50% of clean water until a
homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react
completely with ingredients. The textured finish prepared as above is then
applied to the wall surface with suitable roller/spray
gun/putty/blade/trowel to get the desired finish. The finished surface shall
be applied with two coats of exterior paint of approved shade. The rate
including providing and removing scaffolding, all lead and lift and all other
incidental charges etc., complete as per directions of the Engineer-in-charge
of the work.
15.106 Providing applying two coats of wall putty to inside plastered walls and Sqm 46.05
ceiling using white cement putty. Scrapping and levelling the surface using
steel blade and preparing the surface even and smooth by using different
grade sand papers, including cost of materials, cost of labour and scaffolding
etc., complete as per the specifications.
Area to be considered -
(a) 100% for fresh surface
(b) Upto 10% for repainting
Note:
1 Lift charges : The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.3.50/sqm per floor for plastering
works only may be added for every additional floor.
2 Lift charges : The above rates are applicable for Ground and basement
floors only. An additional rate of Rs.1.50/sqm per floor for painting
works of exterior walls only may be added for every additional floor.
Rate
Sl. No. Description Unit
Rs. Ps.
Repairs to Buildings
Rate
Sl. No. Description Unit
Rs. Ps.
16.1.3 KSRB-24.3: Extra for washing the wall surface spoiled by smoke, soot, with Sqm 1.90
clear water before sand papering the surface smooth including necessary
repairs to scraches, cost of labour, complete as per specifications.
16.1.4 KSRB-24.4: Extra Item No.24-3 washing the ceiling and / or sloping roof Sqm 2.15
surface spoiled by smoke, soot with clear water before sand papering the
surface smooth and including necessary repairs to scraches, cost of labour,
complete as per specifications.
16.2 KSRB-24.5: Cleaning and washing of decorated wall surface with soap, soda
and water including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.2.1 -do- Sqm 2.00
16.2.2 KSRB-24.6: Extra for KSRB 24-5 Cleaning and washing the old ceiling and / Sqm 2.25
or sloping roof with soap, soda and water including cost of materials, labour,
complete as per specifications.
16.3 KSRB-24.7: Cleaning and washing the old plastered wall surface with soap,
soda, water including cost of materials, labour, complete as per
specifications.
16.3.1 -do- Sqm 1.95
16.3.2 KSRB-24.8: Extra for Item No.24-7 Cleaning and washing the old plastered Sqm 2.20
ceiling and / or sloping roof surface with soap, soda, water including cost of
materials, labour, complete as per specifications.
16.4 KSRB-24.9: Cleaning and washing of stone masonry wall surface with nitric Sqm 2.80
acid including cost of materials, labour, complete as per specifications.
Specification No.KBS
Rate
Sl. No. Description Unit
Rs. Ps.
16.5 KSRB-24.10: Removing the old paint or polish from wood and / or wood Sqm 34.40
based surfaces with paint remover of approved brand / manufacturer and
making surface even including cost of materials, labour, complete as per
specifications.
Specification No.KBS
16.6 KSRB-24.11: Removing the old paint or polish from wood and / or wood Sqm 23.50
based surfaces with caustic soda solution and making surface even including
cost of materials, labour, complete as per specifications.
Specification No.KBS
16.7 KSRB-24.12: Removing the old paint from wood and / or wood based surface Sqm 48.60
with blow lamp and making surface even including cost of materials, labour,
complete as per specifications.
Specification No.KBS
16.8 KSRB-24.13: Removing the old paint from steel and / or other metal surface Sqm 38.70
with hand scraping and making surface even including cost of materials,
labour, complete as per specifications.
Specification No.KBS
16.9 KSRB-24.14: Removing the old paint from steel and / or other metal surface Sqm 48.60
with flame cleaning and making surface even including cost of materials,
labour, complete as per specifications.
Specification No.KBS
16.10 KSRB-24.15: Removing the old paint from steel and / or other metal surface Sqm 34.00
with paint remover of approved brand / manufacturer cleaning and making
surface even including cost of materials, labour, complete as per
specifications.
Specification No.KBS
16.11 KSRB-24.16: Fixing small pieces (not exceeding 0.015 cum) for making good Piece 11.65
wherever hinges etc., have been removed from frames or joinery etc., with
teak wood excluding cost of materials but including cost of labour, complete
as per specifications.
Specification No.KBS
16.12 KSRB-24.17: Providing and fixing small pieces (not exceeding 0.015 cum) for Piece 175.80
making good wherever hinges etc., have been removed from frames or
joinery etc., with honne wood including cost of materials, labour, complete
as per specifications.
Specification No.KBS
16.13 KSRB-24.18: -do- matti / nandi wood Piece 145.00
16.14 KSRB-24.19: -do- Sal wood pieces (not exceeding 0.015 cum) Piece 120.75
16.15 KSRB-24.20: Renewing bars, styles and rails, straight for joinery upto 50mm Piece 857.00
thick including mitres, haunching, mortices etc., and removing the old
defective pieces and replacing with Teak wood including cost of materials,
labour, complete as per specifications.
Specification No.KBS
16.16 KSRB-24.21: -do- Honne wood Piece 485.20
16.17 KSRB-24.22: -do- Matti / Nandi wood Piece 403.50
16.18 KSRB-24.23: Rewedging, cramping joinery of any description with new Piece 263.50
wedges in glue or white lead and repining including rehanging or refixing of
shutters, hinges or pivots, not exceeding one sqm per leaf, removing or
dismantling excluding cost of wood but including cost of labour, complete as
per specifications.
Specification No.KBS
16.19 KSRB 24-24 : -do- exceeding one sqm but not exceeding two sqm per leaf Leaf 349.80
16.27 KSRB 24-32 : Removing serviceable glass of any description from old wood or Sqm 81.65
metal frames (any thickness of size, quality or description) hacking out old
putty ect., including risk and making good breakages in taking out and
handling, stacking within a lead of 50m. including cost of labour, complete as
per specifications.
16.38 KSRB 24-44 : Repairs to plaster in patches of 2.5 sqm and less in walls, Sqm 210.10
ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches
in proper shape and replastering the surface of the wall including disposal of
rubbish with a lead of 50m including curing cost of materials, labour,
complete as per specifications.
16.42 Removing of existing old or broken Water closet Indian / European and Each 138.00
disposing it with all cost and conveyance labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation
charges and all other incidental charges etc., complete as per specification
and directions of the Engineer-in-charge of the work.
16.43 Removing of existing old Sanitary and plumbing pipelines, stacking and m 46.00
disposing it with all cost and conveyance labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation
charges and all other incidental charges etc., complete as per specification
and directions of the Engineer-in-charge of the work.
16.45 Cleaining stone parapets removing of dirt dust etc., using suitable soap Sqm 1.00
powder, coconut broomstic, squeezers / wipers / rubber brushes, coir
brushes, plastic brushes, mugs, booster pumps with portable arrangement,
hose pipe etc., complete including cost of water charges and electrical
charges.
Rate
Sl. No. Description Unit
Rs. Ps.
16.46 Cleaning Quadrangle chajjas including removing of dirt dust etc., using Sqm 5.00
suitrable soap powder, coconut broomstic, squeezers / wipers / rubber
brushes, coir brushes, plastic brushes, mugs, booster pumps with portable
arrangement, hose pipe etc., complete excluding water charges including
electrical charges and all safety measures.
16.47 Cleaning sub surface drains including removing of dirt dust etc., using m 8.30
suitrable soap powder, coconut broomstic, squeezers / wipers / rubber
brushes, coir brushes, plastic brushes, mugs, booster pumps with portable
arrangement, hose pipe etc., complete.
16.48 Cleaning surface drains including removing of dirt dust etc., using suitrable m 5.45
soap powder, coconut broomstic, squeezers / wipers / rubber brushes, coir
brushes, plastic brushes, mugs, booster pumps with portable arrangement,
hose pipe etc., complete.
16.49 Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage Sqm 1.00
units, furnitures, electrical & electronic equipements, doors, windows,
curtains, blins etc., including cleaning of dust, etc., using suitable bombay
broom stick, squeezers / wipers / rubber brushes, mop sticks, coir brushes,
bamboo baskets, plastic buckets, trolleys, wiping cloths, carry bags, etc.,
removing the debris to the nearest garbage pit complete.
Rate
Sl. No. Description Unit
Rs. Ps.
Roads and
Bridges - Carriage
of
Materials
Rate
Sl. No. Description Unit
Rs. Ps.
17.7 KSRRB M100-5. Supply of quarried stone, hand breaking into coarse cum 916.00
aggregate 63mm nominal size (passing 80mm and retained on 50 mm sieve)
and stacking as directed complete as per specifications.
MORTH / Chapter 2
18.12 KSRRB 200-9. -do- thorney jungle Sqm 7.05
18.13 KSRRB M200-10.1. Clearing and grubbing road land including uprooting Ha 36380.00
rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300
mm, removal of stumps of trees cut earlier and disposal of unserviceable
materials and stacking of serviceable materials to be used or auctioned,
including removal and disposal of top organic soil not exceeding 150 mm in
thickness complete as per specifications. I. By manual Means. A. In area of
light jungle.
Rate
Sl. No. Description Unit
Rs. Ps.
MORTH Specification No.201
18.14 KSRRB M200-10.2 -do- I. By manual Means:B. In area of thorny jungle. Ha 48645.00
18.15 KSRRB M200-11.1. Clearing and grubbing road land including uprooting Ha 19935.00
rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300
mm, removal stumps of trees cut earlier and disposal of unserviceable
materials and stacking of serviceable materials to be used or auctioned,
including removal and disposal of top organic soil not exceeding 150 mm in
thickness complete as per specifications.
18.17 KSRRB M200-12.1. Dismantling of existing strucures like culverts, bridges, cum 235.00
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
18.52 KSRRB M200-28.2 -do- B. Ordinary KM stone (quantity of cement concrete Each 140.00
=0.269 cum).
18.53 KSRRB M200-28.2. -do- B. Hectometer stone (quantity of cement concrete Each 28.05
=0.468 cum).
KSRRB M200-Dismantling of barbed wire fencing
18.54 KSRRB M200-29. Dismantling of barbed wire fencing / wire mesh fencing m 31.10
including posts, foundation concrete, back filling of pit by manual means
including disposal of dismantled materials with all lifts and stacking
serviceable material and unserviceable material separately complete as per
specifications.
Earth Work,
Erosion Control and
Drainage
Rate
Sl. No. Description Unit
Rs. Ps.
MORTH / Chapter 3
19.2 KSRRB 300-2. -do- in hard soil cum 84.40
KSRRB 300-3. Excavation for road formation
19.3 KSRRB 300-3. Earthwork excavation and forming in embankment by manual cum 77.35
means in ordinary soil (When earth is taken from bank cutting of from
borrow pits) including breaking of clods, spreading to required line and level,
forming, and cost of all labour complete as per specifications. (excavation
watering and compaction earth) (with all lead and lift)
MORTH / Chapter 3
19.6 KSRRB 300-6. -do- soft rock without blasting cum 556.40
19.7 KSRRB 300-7. Excavation in hard rock by blasting for formation of roads cum 368.35
including stacking to uniform line and level as directed by the engineer
including cost of explosives, labour, HOM of machineries and equipments
complete as per specifications. (with all lead and lift)
MORTH / Chapter 3
19.8 KSRRB 300-8. Excavation in hard rock by chiselling and / or wedging where cum 836.00
blasting is prohibited for formation of roads including stacking to uniform
line and level including cost of all labour complete as per specifications.
(with all lead and lift)
MORTH / Chapter 3
19.9 KSRRB 300-9. Excavation for roadway in soil using manual means including cum 114.50
loading in truck for carrying of cut earth to embankment site complete as
per specifications.
MORTH Specification No.301
19.10 KSRRB 300-10. Excavation for ordinary rock using manual means including cum 164.75
loading in truck and carrying of excavated material to embankment site and
complete as per specifications.
MORTH Specification No.301
Rate
Sl. No. Description Unit
Rs. Ps.
Excavation in Soil with Dozer
19.11 KSRRB 300-11. Excavation for road way in soil bu mechanical means cum 65.30
including cutting and pushing the earth to site of embankment upto a
including trimming bottom and side slopes in accordance with requirements
of lines, grades and cross sections complete as per specifications.
19.21 KSRRB M300-20. Carrying out excavation in hard rock to achieve a specified sqm 77.80
slope of the rock face by controlled use of explosives and blasting accessories
in properly aligned and spaced drill holes, collection of the excavated rock by
a 80 HP dozer, loading in tipper by a front end loader and disposing of the
material all as specified in clause No.300.3 complete as per specifications.
19.27 KSRRB M300-24 -do- iv) Hard Rock (blasting prohibited) A. Mechanical cum 429.00
Means.
19.28 KSRRB M300-25.2 -do- v) Marshy soil - A. Manual Means (i) upto 3 m depth cum 320.20
19.29 KSRRB M300-25.3 -do- vi) Marshy soil - B) Mechanical means (ii) Upto 3 m cum 81.80
depth
KSRRB 300-Extra additional lead
19.30 KSRRB 300-26.1. Extra for every 7.5m additional lead beyond 15m but upto cum 2.60
60m by manual means for all kinds of soils except hard rock including cost of
all labour complete as per specifications.
MORTH Chapter 3
19.31 KSRRB 300-26.2. When lead is more than 60m upto 500m by any means of cum 3.00
conveyance including loading and unloading for all kinds of soils except hard
rock including cost of all labour complete as per specifications.
MORTH Chapter 3
19.32 KSRRB 300-27. Dressing of earthwork including cutting and filling upto 15 cum 30.50
cms thick or thick or depth including cost of all labour complete as per
specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
MORTH Chapter 3
19.33 KSRRB 300-28. Box cutting / trenching the sub grade to proper slope, sqm 0.75
camber and removing inequalities including removing the stuff and
depositing on the road side slopes (cutting of earthwork shall be paid
seperately in the respective item on the basis of classification of the
excavation) including cost of all labour complete as per specifications.
MORTH Chapter 3
KSRRB M300- Stripping and Storing of top soil
19.34 KSRRB M300-29. Stripping, storing of top soil by road side at 15 internal and cum 139.45
re-application of embankment slopes. Cut slopes and other areas in localities
where the available embankment material is not conducive to plant growth
complete as per specifications.
MORTH / Chapter 3
19.51 KSRRB 300-45. Scarifying stone metal crust 50mm to 100mm thick with pick Sqm 37.50
axes along with premix carpet / surface dressing and stacking of old
serviceable materials by manual means including cost of all labour charges
complete as per specifications.
MORTH / Chapter 3
19.52 KSRRB 300-46. Scarifying stone metal crust 50mm to 100mm thick by road Sqm 23.35
roller with scarifier along with 20mm premix carpet / surface dressing and
stacking of old serviceable materials including cost of all labour charges,
HOM of machinaries complete as per specifications.
MORTH / Chapter 3
19.53 KSRRB 300-47. Scarifying kankar / gravel / metal crust upto 150mm thick Sqm 18.75
with pick axes and disposal of stuff including cost of all labour charges
complete as per specifications.
MORTH / Chapter 3
19.54 KSRRB 300-48. Scarifying kankar / gravel / metal crust upto 150mm thick Sqm 14.00
with power roller and scarifier, disposal to stuff including cost of all labour
charges, HOM of machineries complete as per specifications.
MORTH / Chapter 3
19.55 KSRRB 300-49. Scarifying bituminous course 50mm to 75mm thick along Sqm 42.20
with premix carpet / surface dressing by manual means without disturbing
the base and stacking of the debris materials including cost of all labour
charges complete as per specifications.
MORTH / Chapter 3
19.56 KSRRB 300-50. Scarifying bituminous course 50mm to 75mm thick along Sqm 23.35
with premix carpet / surface dressing by road roller attached with scarifier
without disturbing the base and stacking the debris including cost of all
labour charges, HOM of machineries complete as per specifications.
MORTH / Chapter 3
19.57 KSRRB 300-51. Making 50mm x 50mm furrows at 450 to the cenetre line of Sqm 2.25
the road and at one metre interval in the existing thin bituminous wearing
course including sweeping, taking out old materials, stacking the debris cost
of all labour charges complete as per specifications.
MORTH / Chapter 3
KSRRB M300- Scarifying Existing Granular Surface to a Depth of 50mm by
Manual Means.
19.58 KSRRB 300-52.1. Scarifying the existing granular road surface to a depth of Sqm 15.30
50mm and disposal of scarified material and complete as per specifications.
19.60 KSRRB M300-53. Construction of embankment with approved material cum 208.00
Gravel / Murrum with all lifts and leads, transporting to site, spreading,
grading to required slope and compacting to meet requirement Table 300- 2
complete as per specifications. (which includes cost of gravel / murrum,
watering charges & compaction by vibratory roller).
19.61 KSRRB M300-54. Construction of embankment with approved material cum 62.80
deposited at site from roadway cutting and excavation from drain and
foundation of other structure graded and compacted to meet requirement of
Table 300- 2 complete as per specifications. (which includes, watering
charges & compaction by vibratory roller).
19.62 KSRRB M300-55. Construction of sub-grade and earthen shoulders with cum 234.10
approved material Gravel/Murrum with all lifts & leads, transporting to site,
spreading, grading to required slope and compacted to meet requirement of
Table 300- 2 complete as per specifications. (including cost of earth,
watering charges & compaction by vibratory roller).
19.63 KSRRB M300-56. Construction of rockfill embankment with available broken cum 35.70
hard rock fragments of size not exceeding 300mm laid in layers not
exceeding 500mm thick including filling of surface voids with stone spalls,
binding top layer with granular material, rolled with vibratory road roller,
all complete as per Clause 313 complete as per specifications.
MORTH / Chapter 3
19.65 KSRRB M300-59.1. Loosening of the ground upto a level of 500mm below the cum 48.15
subgrade level, watered, graded and compacted in layers to meet
requirement of Table 300-2 for subgrade construction complete as per
specifications. Case-I : Compacting original ground supporting, subgrade.
(which includes watering charges & compaction by vibratory roller).
Rate
Sl. No. Description Unit
Rs. Ps.
MORTH Specification No. 305.3.4
19.66 KSRRB M300-59.2. Loosening, levelling and compacting original ground cum 24.45
supporting embankment to facilitate placement of first layer of
embankment, scarified to a depth of 150mm, mixed with water at OMC and
then compacted by rolling so as to achieve minimum dry density as given in
Table 300-2 for embankment construction. Complete as per specifications.
Case-II: Compacting original ground supporting embankment. (which
includes watering charges & compaction by vibratory roller).
MORTH / Chapter 3
19.68 KSRRB 300-61. Extra for laying earth by manual means as per specifications cum 32.25
for compaction in 250mm thick loose layers when laying of earth in layers is
done from stacked materials including breaking of clods and dressing but
excluding rolling and watering including cost of all labour complete as per
specifications.
MORTH / Chapter 3
19.69 KSRRB 300-62. Extra for laying earth by mechanical means as per cum 21.10
specifications for compaction in 250mm thick loose layers when laying of
earth in layers is done from stacked materials including breaking of clods
and dressing but excluding rolling and watering including cost of all
labour,HOM of machineries complete as per specifications.
MORTH / Chapter 3
19.7 KSRRB M300-63. Construction of Embankment with Flyash / Pond Ash cum 75.65
available from Coal or Lignite Burning Thermal Plants as Waste Material.
Construction of embankment with flyash conforming to Table 1 of IRC:SP:58-
2001 obtained from coal or lignite burning thermal power stations as waste
material, spread and compacted in layer of 200mm thickness each at OMC,
all as specified in IRC:SP:58-2001 and as per approved plans complete as per
specifications.
19.71 KSRRB 300-64.1. Extra for watering the earth to bring the earth upto cum 5.55
required optimum moisture content manually including cost of all labour
complete as per specifications.
MORTH / Chapter 3
19.72 KSRRB 300-64.2. Extra for watering the earth to bring the earth upto cum 1.75
required optimum moisture content with mechinery including cost of all
labour, HOM of machineries complete as per specifications.
MORTH / Chapter 3
19.73 KSRRB 300-65. Extra for rolling to specification with the use of vibratory cum 15.50
roller when earth is at suitable moisture content with desired field density
not less than 95% of maximum dry density (modified heavy proctor test)
including HOM of machineries complete as per specifications.
MORTH / Chapter 3
Rate
Sl. No. Description Unit
Rs. Ps.
19.74 KSRRB 300-66. Extra for rolling to specification with the use of vibratory cum 19.40
roller when earth is at suitable moisture content with desired field density
not less than 100% of maximum dry density (modified heavy proctor test)
including HOM of machineries complete as per specifications.
MORTH / Chapter 3
19.75 KSRRB 300-67. Extra for rolling to specification with power roller when cum 6.95
earth is at suitable moisture content with desired field density not less than
95% of maximum dry density (ordinary proctor test) including HOM of
machineries complete as per specifications.
MORTH / Chapter 3
19.76 KSRRB 300-68. Extra for rolling to specification with power roller 8-10 tonne cum 8.70
when earth is at suitable moisture content with desired field density not less
than 100% of maximum dry density (ordinary proctor test) including HOM of
machineries complete as per specifications.
MORTH / Chapter 3
KSRRB M300-Horticulture
KSRRB M300- Spreading of sludge farm yard manure or / and good earth
19.77 KSRRB M300-1. Spreading of sludge farm yard manure or / and good earth cum 48.25
in required thickness (cost of sludge, farm yard manure or / and good earth
to be paid for separately) complete as per specifications.
MORTH Specification No. 307
KSRRB M300- Grassing with Doobs grass
19.78 KSRRB M300-2.1. Grassing with Doobs grass including watering and Sqm 45.60
maintenance of the lawn for 30 days or more till grass forms a thick lawn
free from weeds and fit for moving including supplying good earth if needed
complete as per specifications.
19.80 KSRRB M300-3. Making lawns including ploughing and breaking of clod, Sqm 12.85
removal of rubbish, dressing and supplying doobs grass roots and plating at
15 cm apart, including supplying and spreading of farm yard manure at rate
of 0.18 cum per 100 sqm complete as per specifications.
19.81 KSRRB M300-4. Maintenance of lawns or Turfing slopes (rough grassing) for Sqm 77.25
a period of one year including watering etc complete as per specifications.
KSRRB M300- Turfing lawns with fine grassing including ploughing, dressing
Rate
Sl. No. Description Unit
Rs. Ps.
19.82 KSRRB M300-5. Turfing lawns with fine grassing including ploughing, Sqm 15.95
dressing including breaking of clods, removal of rubbish, dressing and
supplying doobs grass roots at 10 cm apart, including supplying and
spreading of farm yard manure at rate of 0.6 cum per 100 sqm complete as
per specifications.
KSRRB M300- Maintenance of lawns with fine grassing for the first year
19.83 KSRRB M300-6. Maintenance of lawns with fine grassing for the first year Sqm 66.55
including watering etc complete as per specifications.
MORTH Specification No.307
19.85 “KSRRB M300-7.2. -do- B) Maintenance of hedges for one year m 101.40
KSRRB M300- Planting and Maintenance of Flowering Plants and Shrubs
19.86 KSRRB M300-8.1. Planting and Maintaining of Flowering Plants and Shrubs - m 16.30
A) Planting flowering plants and shrubs in central verge
MORTH Specification No.307
19.87 KSRRB M300-8.2. -do- B) Maintenance of flowering plants and shrubs in Km 1,10,315.00
central verge for one year.
KSRRB M300- Planting of trees and their maintenance for one year
19.88 KSRRB M300-9. Planting of trees by the road side (Avenue trees) in 0.60 m Each 547.00
dia holes, 1m deep dug in the groun, mixing the soil with decayed farm yard /
sludge manure, planting the saplings, backfilling the trench, watering, fixing
the tree guard and maintenance the plants for one year complete as per
specifications.
19.95 KSRRB M300-16. Making tree guard 53 cm dia and 1:3 m high as per design Each 300.00
from empty bitumen drum, slit suitably to permit sun and air, (supplied by
the department at stock issue rate) including providing and fixing 2 nos MS
sheet rings 50 x 0.5 mm with rivets, complete in all respect complete as per
specifications.
19.96 KSRRB M300-17. Making tree guard 53 cm dia and 2 metres high as per Each 597.50
design from empty bitumen drums, slit suitably to permit sun and air,
(supplied by the department at stock issue rate) including providing and
fixing four legs 40 cm long of 30 x 3 mm MS riveted to tree guard and
providing and fixing 2 nos. MS sheet rings 50 x 0.5 mm with rivets, complete
in all respect complete as per specifications.
19.102 Milling the bituminous pavement surface upto a depth of 55 mm using Sqm 68.00
milling machine, to make a uniform surface without disturbing the base,
cleaning the milled surface, including cost of all labour charges and hire
charges of machineries etc complete, including stacking the milled material
on the sides of road.
Rate
Sl. No. Description Unit
Rs. Ps.
Note:
1 For any additional depth over and above 55 mm, rate shall be worked
out on pro-rata basis
2 Lead charges for the disposal of milled material shall be worked out as
per note 1 indicated in chapter 17. The lead charges shall be allowed
only with prior approval of Executive Engineer.
3 In case there is a situation where the cross-section is of cut and fill and
cut earth is required to be used in embankment in the immediate
vicinity.
4 KSRRB 300-26.2 Note: For lead beyond 500 m earthwork shall be
payable at carriage rates by mechanical transport. These rates also
include earthwork excation in ordinary soil including loading and
unloading.
Sub Bases-Bases
(Non bituminous)
and Shoulders
Rate
Sl. No. Description Unit
Rs. Ps.
20.1 KSRRB 400-1. Providing, laying, spreading and compacting inverted choke of cum 1934.00
screening Type ‘B’ or sand in sub-base course i uniform layer on a prepared
base by mechanical means with motor grader and compacting with power
roller including cost of materials, labour, HOM of machineries complete as
per specifications.
MORTH Chapter 4
20.2 KSRRB 400-2. Providing, laying, spreading and compacting specified graded cum 2100.00
sand, gravel or any other course material in sub-base course including
premixing the material at OMC in mechanical mixer (Pug mill), carriage of
mixed material up to 1km, spreading in uniform layers with motor grader on
a prepared base and compacting with power roller to achieve the desired
density including all materials, labour, HOM of machinery, lighting,
guarding, barricading and maintenance of diversion complete as per
specifications.
MORTH Chapter 4
20.3 KSRRB 400-4. Providing, laying, spreading and compacting specified graded cum 2277.00
sand, gravel or any other course material in sub-base course including
premixing the material at OMC in mechanical mixer (Pug mill), carriage of
mixed material up to 1km, spreading in uniform layers with motor grader on
a prepared base and compacting with power roller to achieve the desired
density, lighting, guarding, barricading and maintenance of diversion,
including cost of materials, labour, HOM of machinery, complete as per
specifications.(material and grinding shall be as per design mix formula)
MORTH Chapter 4
20.4 KSRRB M400-6.1 Construction of granular sub-base by providing close
graded material, mixing in a mechanical mix plant at OMC, carriage of mixed
material to work site, spreading in uniform layers with motor grader on
prepared surface and compacting with vibratory power roller to achieve the
desired density, complete as per specifications.
A. Plant MixMethod.
20.4.1 Close graded granular sub-base material as per 400-1 cum 1199.00
For Grading-I Material
20.4.2 For Grading-II Material cum 1114.00
20.4.3 For Grading-III Material cum 1115.00
Rate
Sl. No. Description Unit
Rs. Ps.
20.5 KSRRB M400-6.2. Construction of granular sub-base by providing close
graded material, spreading in uniform layers with motor grader on prepared
surface, mixing by in place method by rotavator at OMC, and compacting
with vibratory power roller to achieve the desired density, complete as per
specifications. B. By Mix in place Method.
20.5 Close graded granular sub-base material as per 400-1 cum 1300.00
For Grading-I Material
20.5.2 For Grading-II Material cum 1,008..
20.5.3 For Grading-III Material cum 1020.00
KSRRB 400 Granular Sub-base with Coarse Graded Material (table 400-2)
20.6.1 For Close graded granular sub-base material as per 400-2 cum 1290.50
For Grading-I Material
20.6.2 For Grading-II Material cum 1211.00
20.6.3 For Grading-III Material cum 968.50
KSRRB M400-Lime stabilization for improving subgrade
20.7 KSRRB M400-8.1. Laying and spreading available soil in the subgrade on a cum 313.00
prepared surface, pulverising, mixing the spread soil in place with rotavator
with 3 percent slaked lime having minimum content of 70 percent CaO,
grading with motor grader and compacting with the road roller at OMC to
the desired density to form a layer of improved subgrade complete as per
specifications. A. By Mechanical means.
20.17 KSRRB M400-16. Spraying of bitumen over cleaned dry surface of crushed Sqm 21.15
cement concrete base at the rate of 25 kg per 10 sqm by a bitumen pressure
distributor, spreading of key aggregates at the rate of 0.13 cum per 10 sqm
by a mechanical gritter and roller the surface as per Clause 500.6.3.8
complete as per specifications.
20.26 KSRRB M400-23. Lime, Flyash stabilised Soil Sub-base. Construction of sub- cum 232.10
base using lime-flyash admixture with granular soil, free from organic
matter/deleterious material or clayee silts and low plasticity clays having PI
between 5 & 20 and liquid limit less than 25 and commercial dry lime slaked
at site or pre-slaked with CaO content not less than 50%, flyash to conform
to gradation as per Clause 43 of IRC: 88-1984, lime + flyash content ranging
between 10 to 30%, the minimum un-confined compressive strength and CBR
value after 28 days curing and 4 days soaking to be 7.5 kg/sqcm and 25%
respectively, all as specified in IRC:88-1984 complete as per specifications.
KSRRB 400-Base
20.27 KSRRB M400-24. Providing, laying, spreading and compacting stone cum 1259.00
aggregates of specific sizes to water bound macadam specifications by
manual means, including spreading in uniform thickness, hand packing,
rolling with power roller 8-10 tonnes in stages to proper grade and camber.
applying and brooming requisite type of screening/binding materials to fill
up the interstics of coarse aggregates, watering and rolling, making
necessary earthen bund to protect edges, lighting, guarding, barricading,
and maintenance of division, including cost of all materials, labour, HOM of
machinery, complete as per specifications.
MORTH / Chapter 4
Rate
Sl. No. Description Unit
Rs. Ps.
20.28 KSRRB M400-25. -do- by mechanical means cum 967.00
(Bituminous)
Sl. No. Description Unit
Rs. Ps.
MORTH / Chapter 5
21.2 KSRRB 500-2. Cleaning the existing black topped surface with brooms, soft Sqm 2.45
brushes and finally dusting with old gunny bags and / or compressed air to
receive bituminous treatment including cost of all materials, labour, HOM of
machineries complete as per specifications.
MORTH / Chapter 5
21.2 KSRRB 500-3. Scarifying existing stone metal layer upto 75 mm thick along Sqm 74.90
with their bituminous surface, picking up scarified materials and stacking of
old serviceable materials with lead of 100 m. sequential spreading of the
salvaged aggregates with fresh aggregates on prepared base and
consolidating as per water bound macadam specifications including cost of
all labour, HOM of machineries complete as per specifications.
MORTH / Chapter 5
KSRRB 500-Applying primer coat over Prepared surface
21.4 KSRRB 500-4. Providing and applying primer coat from 7.5 to 9.8 kg and 9.8
to 12.2 kg per 10 sqm for surface of low and medium porosity respectively
over prepared surface of granular base with cut back M.C-70 or any other
bitumen mixed with diesel at 10kg per 10 sqm heated in bitumen boiler fitted
with spray set (excluding clearing of road surface) including cost of all
materials, labour, HOM of machineries complete as per specifications.
MORTH / Chapter 5
21.4.1 -do- low porosity Sqm 74.80
21.4.2 -do- medium porosity Sqm 93.15
Rate
Sl. No. Description Unit
Rs. Ps.
21.5 KSRRB 500-5. Providing and applying primer coat from 12.2 to 14.6 kg per Sqm 131.55
10 sqm for surfaces of high porosity over prepared surface of granular base
with cut back M.C-70 or any other bitumen mixed with diesel at 13kg per 10
sqm heated in bitumen boiler fitted with spray set (excluding cleaning of
road surface) including cost of all materials, labour, HOM of machineries
complete as per specifications.
MORTH / Chapter 5
KSRRB 500-Primer Coat / Tack coat
21.6 KSRRB 500-6. Providing and applying primer coat with bitumen emulsion on Sqm 48.85
prepared surface of granular base including clearing of road surface and
spraying primer at the rate of 0.60 kg / sqm using mechanical means
complete as per specifications.
MORTH / Chapter 5
21.8 KSRBB 500-8. Providing and applying tack coat on granular surface treated Sqm 20.80
with primer at 3 kg per 10 sqm, heating bitumen in boiler fitted with spray
set (excluding cleaning of road surface) including cost of all materials,
labour, HOM of machineries complete as per specifications.
MORTH / Chapter 5
21.9 KSRBB 500-9. Providing and applying tack coat on granular base such as Sqm 26.80
WBM and WMM surfaces hot bitumen primed at 4 kg per 10 sqm, heating
bitumen in boiler fitted with spray set (excluding cleaning of road surface)
including cost of all materials, labour, HOM of machineries complete as per
specifications.
MORTH / Chapter 5
21.1 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen
emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm
on the prepared bituminous / granular surface cleaned with mechanical
broom. complete as per specifications.
21.13 KSRRB M500-13. Providing and laying bituminous macadam 50mm thick
with 100-120 TPH mix plant producing an average output of 75 tonnes per
hour using crushed aggregates of specified grading premixed with
bituminous binder, transported to site, laid over a previously prepared
surface with paver finisher to the required grade, level and alignment and
rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction
complete as per specifications.
21.14 KSRRB M500-14.1. Construction of penetration macadam over prepared Sqm 396.50
base by providing a layer of compacted crushed coarse aggregate using chips
spreads with alternate applications of bituminous binder and key aggregates
and rolling with a vibratory roller 8-10 tonne capacity to achieve the desired
degree of compaction, complete as per specifications. A. 50mm thick, MORTH
Specificaton No.505
MORTH / Chapter 5
Rate
Sl. No. Description Unit
Rs. Ps.
21.18 KSRRB M500-17. Providing and laying dense graded bitumenous macadam
with 100-120 TPH batch type HMP producing an average output of 75
tonnes as per hour using crushed aggregates of specified grading, premixed
with bituminous binder at 4.0 to 4.5% by weight of total mix and filler,
transporting the hot mix to work site, laying with a hydrostatic, paver
finisher with sensor control to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MORTH specifiation clause No. 500.7 complete in
all respects as per specifications. Bitumen 80/100 MORTH Specification
No.507
21.18.1 -do- 80-100mm compacted thickness (Grading I) with 4% Bitumen cum 7110.00
21.18.2 -do- 50-75mm compacted thickness (Grading II) with 4.5% Bitumen cum 8350.00
21.19 KSRRB M500-17. Providing and laying dense graded bituminous macadam
with 100-120 TPH batch type HMP produced an average output of 75 tonnes
per hour using crushed aggregates of specified grading, premixed with
bituminous binder at 4.0 to 4.5% by weight of total mix and filler,
transporting the hot mix to work site, laying with a hydrostatic paver
finisher with sensor control to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MORTH specification clause No.500.7 complete in
all respects as specifications.
21.20.1 25-30mm compacted thickness with 5% bitumen 80/100 grade (GradingII) cum 8980.00
21.20.2 25-30mm compacted thickness with 5% bitumen 60/70 grade (GradingII) cum 9120.00
21.20.3 25-30mm compacted thickness with 5% bitumen 80/100 grade using 40-60 cum 9180.00
HMP (GradingII)
21.20.4 25-30mm compacted thickness with 5% bitumen 60/70 grade using 40-60 cum 9320.00
HMP (GradingII)
21.20.5 25-30mm compacted thickness with 5% bitumen 80/100 using 40-60 HMP cum 9130.00
using mechanical paver (Grading II)
21.20.6 25-30mm compacted thickness with 5% bitumen 60/70 using 40-60 HMP cum 9270.00
using mechanical paver (Grading II)
21.20.7 35-40mm compacted thickness with 4.5% bitumen using 80/100 grade cum 8275.00
(Grading I)
21.20.8 35-40mm compacted thickness with 4.5% bitumen using 60/70 grade cum 8400.00
(Grading I)
Rate
Sl. No. Description Unit
Rs. Ps.
21.21 KSRRB M500-18. Providing and laying semi dense bituminous concrete 25-30
with 100-120 TPH batch type HMP producing an average output of 75
tonnes per hour using crushed aggregates of specified grading, premixed
with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot
mix to work site, laying with a hydrostatic paver finisher with sensor control
to the required grade, level and alignment, rolling with smooth wheeled,
vibratory and tandem rollers to achieve the desired compaction as per
MORTH specification clause No.500.8 complete in all respects as per
specifications.
21.22.2 30-45mm compacted thickness (Grading II) with 6% Bitumen 60/70 cum 10685.00
21.22.3 30-45mm compacted thickness (Grading II) with 6% Bitumen 80/100 grade cum 10720.00
using 40-60 HMP
21.22.4 30-45mm compacted thickness (Grading II) with 6% Bitumen 60/70 grade cum 10890.00
using 40-60 HMP
21.22.5 30-45mm compacted thickness (Grading II) with 6% Bitumen 80/100 grade cum 10670.00
using 40-60 HMP using mechanical paver
21.22.6 30-45mm compacted thickness (Grading II) with 6% Bitumen 60/70 grade cum 10840.00
using 40-60 HMP using mechanical paver
21.22.7 50-65mm compacted thickness(Grading II)with 5.5% Bitumen 80/100 cum 10055.00
21.22.8 50-65mm compacted thickness (Grading II) with 5.5% Bitumen 60/70 cum 10215.00
21.23 KSRRB M500-19. Providing and laying bituminous concrete 30-45 mm thick
with 100-120 TPH batch type hot mix plant producing an average output of
75 tonnes per hour bituminous binder at 5.4 to 5.6% of mix and filler,
transporting the hot mix to work site, laying with a hydrostatic paver
finisher with sensor control to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MORTH specification clause No.500.9 complete in
all respects complete as per specifications.
MORTH / Chapter 5
Rate
Sl. No. Description Unit
Rs. Ps.
21.25 KSRRB 500-21.2 Extra labour for protecting the crushed stone chipping for cum 783.00
bitumen including heating and mixing the material by mechanical means
and handling the mixed materials within a lead of 30m. including cost of all
labour, HOM of machineries complete as per specifications.
MORTH / Chapter 5
KSRRB 500-Surfaces dressing
21.26 KSRRB 500-22. Providing and laying single coat surface dressing or first coat Sqm 134.20
of the two surface dressing with 0.15 cum crushed stone chippings and
bitumen 18kg / 10 sqm as wearing course consisting of a layer of bituminous
binder laid on the prepared surface followed by cover of crushed stone
chippings of specified size (may be pre-coated also) and rolling with power
roller 8-10 tonne capacity including cost of all materials, labour, HOM of
machineries complete as per specifications.
MORTH / Chapter 5
21.27 KSRRB 500-23. Providing and laying second coat of two surface dressing Sqm 86.30
(also used as renewal one coat) with 0.10 cum crushed layer as wearing
course and bitumen 11.00 kg/10 sqm on the prepared surface and rolling
with power roller 8-10 tonne capacity including cost of all materials, labour,
HOM of machineries complete as per specifications.
MORTH / Chapter 5
21.28 KSRRB M500-24.1. Providing and laying surface dressing as wearing course Sqm 89.80
in single coat using crushed stone aggregates of specified size on a layer of
bituminous binder laid on prepared surface and rolling with 8-10 tonne
smooth wheeled steel roller complete as per specifications.
21.29 KSRRB M500-24.2. Providing and laying surface dressing as wearing course Sqm 73.65
in single coat using crushed stone aggregates of specified size on a layer of
bituminous binder laid on prepared surface and rolling with 8-10 tonne
smooth wheeled size roller complete as per specifications.
MORTH / Chapter 5
21.31 KSRRB 500-26. -do using crumb rubber modified bitumen (CRMB 55) Sqm 128.00
MORTH / Chapter 5
Rate
Sl. No. Description Unit
Rs. Ps.
21.32 KSRRB 500-27. Providing and laying open graded premix carpet of 20mm Sqm 137.25
thick on prepared surface in a single courses as wearing course composed of
11.2mm and 13.2mm size stone aggregates premixed with bituminous binder
in mini hot mix plant 6-10 tonne capacity laying manually and rolling with
power roller 8-10 tonne excluding cost of primer / tack coat including cost of
all materials, labour, HOM of machineries complete as per specifications.
80/100 Bitumen
MORTH / Chapter 5
21.33 KSRRB 500-28. -do- Using CRMB Sqm 137.35
MORTH / Chapter 5
21.34 “KSRRB M500-29.1. Providing, laying and rolling of open - graded premix Sqm 134.30
surfacing of 20 mm thickness composed of 13.2 mm to 5.5 mm aggregates
either using penetration grade bitumen or cut-back or emulsion to required
line, grade and level to serve as wearing course on a previously prepared
base, including mixing in a suitable plant, laying and rolling with a smooth
wheeled roller 8-10 tonne capacity, finished to required level and grades
complete as per specificatons. Case-I: Mechanical method using penetration
grade bitumen and HMP of appropriate capacity not less than 75
tonne/hour”
21.37 KSRRB 500-31. -do- with crumb rubber modified bitumen (CRMB 55) MORTH Sqm 168.30
/ Chapter 5
21.38 KSRRB 500-32. Providing and laying 20 mm thick mix seal surfacing Type ‘B’ Sqm 151.60
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 11.2mm size premixed with bitumen binder in
hotmix plant 30 to 40 tonne, transporting the mixed materials in tipper to a
distance upto 1 km. and laying with paver finisher to required level and
grade, rolling with power roller 8-10 tonne excluding cost of tack coat
including cost of all materials, labour, HOM of machineries complete as per
specifications using 80/100 grade bitumen.
MORTH / Chapter 5
21.38.1 -do- using 60/70 Sqm 151.60
21.39 KSRRB 500-33. -do- with crumb rubber modified bitumen binder MORTH Sqm 151.80
Chapter 5
Rate
Sl. No. Description Unit
Rs. Ps.
21.40 KSRRB 500-34. Providing and laying 20 mm thick mix seal surfacing Type ‘A’ Sqm 179.00
on prepared surface in a single course composed to specified graded crushed
aggregates of 5.6mm and 11.2mm size premixed with bitumen in a minimix
6/10 tonne, laying manually and rolling with power roller 8-10 tonne
excluding cost of primer / tack coat including cost of all materials, labour,
HOM of machineries complete as per specifications. MORTH / Chapter 5
21.41 KSRRB 500-35. -do- with crumb rubber modified bitumen (CRMB55) MORTH Sqm 179.10
Chapter 5
21.42 KSRRB 500-36. Providing and laying 20 mm thick mix seal surfacing Type ‘B’ Sqm 165.70
on prepared surface in a single course composed to specified graded crushed
aggregates of 5.6mm and 13.2mm size premixed with bitumen in a minimix
6/10 tonne, laying manually and rolling with power roller 8-10 tonne
excluding cost of primer / tack coat including cost of all materials, labour,
HOM of machineries complete as per specifications using 80/100 grade
bitumen.
MORTH / Chapter 5
21.43 KSRRB 500-37. -do- with crumb rubber modified bitumen (CRMB55) MORTH Sqm 159.50
Chapter 5
KSRRB M500-Close-graded premix surfacing / Mixed Seal surfacing
21.44 KSRRB M500-38.1. Providing, laying and rolling of close-graded premix Sqm 147.60
surfacing material of 20 mm thickness composed of 13.2 mm to 0.09 mm
(Type-B) aggregates using penetration grade bitumen to the required line,
grade and level to serve as wearing course on a previously prepared base,
including mixing in a suitable plant, laying with Paver and rolling with a
Smooth wheeled roller 8-10 tonne capacity, and finishing to required level
and grade complete as per specifications.
21.45 KSRRB M500-39.1. Providing and laying a seal coat sealing the voids in
bituminous surface lay to the specified levels, grade and cross fall using Type
“A” and B seal coat. complete as per specifications. Case:I Type A
MORTH Specification No.513
21.45.1 -do- Case. I Type A Sqm 66.65
21.45.2 -do- Case I. Type B Sqm 49.00
21.46 KSRRB M500-39.2. Providing and laying of premix sand seal coat with HMP Sqm 49.10
of appropriate capacity not less than 75 tonnes/hours using crushed stone
chipping 6.7 mm size and penetration bitumen of suitable grade complete as
per specifications. Case : II Type B
21.52 KSRRB M500-47. Recycling pavement by cold milling of existing bituminous cum 6450.00
layers, planning the surface after cold milling, reclaiming excavated
materials to the extent of 30 per cent of the required quantity, hauling and
stock pilling the reclaimed material near the central recycling plant after
carrying out necessary checks and evaluation, adding fresh material
including rejuvenators as required, mixing in a hot mix plant, transporting
and laying at site and compacting to the required grade, level and thickness,
as specified in clause 500.17 complete as per specifications.
21.58 KSRRB M500-49.4. -do- Case - IV : Using cutback bitumen & 19mm or 26.2 cum 12050.00
mm nominal size aggregate.
MORTH Specification No.519
KSRRB M500-Sand-asphalt base course
21.59 KSRRB M500-50. Providing, laying and rolling sand-asphalt base course cum 9410.00
composed of sand, mineral filler and bituminous binder on a prepared sub-
grade or sub-base to the lines, levels, grades and cross sections as per the
drawing including mixing in a plant of suitble type and capacity,
transporting, laying, compacting and finishing complete as per
specifications.
MORTH /Chapter 5
21.63 KSRRB 500-55. -do- using crumb rubber modified bitumen (CRMB55) Sqm 51.60
MORTH /Chapter 5
KSRRB M500-Slurry seal
21.64 KSRRB M500-56.1. Providing and laying slurry seal consisting of a mixture of Sqm 79.00
fine aggregates, portland cement filler, bituminous emulsion and water on a
road surface including cleaning of surface, mixing of slurry seal in suitable
mobile plant, laying and compacting to provide even riding surface complete
as per specifications.
Case - I : 5 mm thickness
MORTH Specification No.516
21.65 KSRRB M500-56.2. -do- Sqm 54.85
Case - II : 3 mm thickness
MORTH Specification No.516
21.66 KSRRB M500-56.3. -do- Sqm 33.50
Case - III : 1.5 mm thickness
MORTH Specification No.516
21.67 KSRRB M500-57.1. Providing and laying of a stress absorbing membrane Sqm 62.40
over a cracked road surface, with crack width below 6 mm after cleaning
with a mechanical broom, using modified binder complying with clause 500-
21, sprayed at the rate of 9 kg per 10 sqm and spreading 5.6 mm crushed
stone aggregates at 0.11 cum per 10 sqm with hydraulic chip spreader,
sweeping the surface for uniform spread of aggregates and surface finished
to conform to clause 900.2 complete as per specification.
Case - I. Stress absorbing membrane (SAM) crack width less than 6mm
MORTH Specification No.522
21.68 KSRRB M500-57.2. Providing and laying of a stress absorbing membrane Sqm 77.55
over a cracked road surface, with crack width below 6 to 9 mm after
cleaning with a mechanical broom, using modified binder complying with
clause 500-21, sprayed at the rate of 11 kg per 10 sqm and spreading 11.2
mm crushed stone aggregates at 0.12 cum per 10 sqm, sweeping the surface
for uniform spread of aggregates and surface finished to conform to clause
900.2 complete as per specification.
Case - II. Stress absorbing membrane (SAM) crack width 6mm to 9mm
MORTH Specification No.522
21.69 KSRRB M500-57.3. Providing and laying a single coat of a stress absorbing Sqm 103.20
membrane over a cracked road surface, with crack width above 9 mm and
cracked area above 50% after cleaning with a mechanical broom, using
modified binder complying with clause 500-21, sprayed at the rate of 15 kg
per 10 sqm and spreading 11.2 mm crushed stone aggregates at 0.12 cum
per 10 sqm, sweeping the surface for uniform spread of aggregates and
surface finished to conform to clause 900.2 complete as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
Case - III. Stress absorbing membrane (SAM) crack width above 9mm and
cracked aread above 50%
MORTH Specification No.522
21.70 KSRRB M500-57.4. Providing and laying a bitumen impregnated geotextile Sqm 150.30
layer after cleaning the road surface, geotextile conforming to requirements
of clause 700.3.3, laid over a tack coat with 1.05 kg per sqm of paving grade
bitumen 80-100 penetration and constructed to the rquirement of clause
700.3.4.5 complete as per specification.
Case - I : 75 mm thickness
MORTH Specification No.519.3
21.72 KSRRB M500-58.2. -do- cum 11007.00
Case - II : 40 mm thickness
MORTH Specification No.519.3
21.73 KSRRB M500-58.3. -do- cum 12643.00
Case - III : 25 mm thickness
MORTH Specification No.519.3
2 Labour for traffic control, watch and ward and other miscellaneous
duties at site including sundries have been included in administrative
overheads of the contactor.
3 Where tack coat is required to be provided before laying mastic
asphalt, the same is required to be measured and paid separately.
4 When anti stripping agent is used conforming to Appendix 5 of MORTH
Specification and IS 14982-2001
(a) add Rs.86.00 per cum for SDBC items 21.20.1,2,3,4,5 and 6
(b) add Rs.96.00/cum for BC items 21.22.1,2,3,4,5 and 6
(c) add Rs.1.21/Sqm for open grade item 21.30, 21.32 and 21.34
(d) add Rs.1.85/Sqm for mixseal Type ‘A’ item 21.36
(e) add Rs.1.62/Sqm for mixseal surface Type ‘B’ item 21.44
(i) add Rs.0.80/Sqm. for seal coat item 21.45
(g) add Rs.0.50/Sqm. for seal coat item 21.45.2
Bituminous mixes :
Rate
Sl. No. Description Unit
Rs. Ps.
5 While laying DBM, SDBC & BC mixes, it is desirable to compact and
prepare Marshall stability Test specifications at the site, by taking the
mix from the paver (rather than from the hot mix plant site only) and
carry out (a) Marshall Stability tests (b) bitumen extraction test and
determination of bituminous binder content and gradation of
aggregates in the mix and (c) determination of density and calculation
of Density - Volds analysis. This will enable to determine the properties
of the mixes at the actual laying temperature.
Concrete
Pavement
22 Concrete Pavement
KSRRB M600 - Cement concrete Pavements
22.1 KSRRB M600-1. Constructing of dry lean cement concrete mix M5 with OPC cum 3340.00
cement @ 160 Kgs, with 25mm and down size graded granite metal coarse
aggregate at 0.86 cum and fine aggregates @ 0.58 cum Sub-base over a
prepared sub-grade with coarse and fine aggregate comforming to IS: 383,
aggregate cement ratio not to exceed 15:1, aggregate gradation after
blending to be as per Table 600-1, cement content not be less than 160
kg/cum, optimum moisture content to be determined during trail length
construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in
a batching plant, transported to site, laid with a paver with electronic sensor,
composing with 8-10 tonnes vibratory roller, finishing and curing complete
as per specifications.
22.5 KSRRB M600-6. Construction of reinforced, dowel jointed,plain cement cum 5642.00
concrete pavement over a prepared sub base with OPC cement design mix
M30 at 360 kg per cum, with 25mm and down size graded granite metal
coarse aggregate at 0.69 cum and fine aggregates @0.46 cum with
superplastisizer at 3lts conforming to IS 9103-1999 Reaffirmed 2008, coarse
and fine aggregate conformin to IS : 383, replacing cement by flyash to the
extent of 15% and sand by 10%, mixed in a batching and mixing plant as per
approved mix design, transported to site, laid with a fixed form or slip form
paver, spread, compacted and finished in a continuous operation including
provision of contraction, expansion, construction and longitudinal joints,
joint filler, separation membrane, sealant primer, joint sealant, debonding
strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing
to lines and grades as per drawing complete as per specifications.
22.6.1 M30 (at 360 Kg per cum coarse aggregate @ 0.69 cum and fine aggregate @ cum 5283.00
0.46 cum)
22.6.2 M20 (at 300 Kg per cum coarse aggregate @ 0.64 cum and fine aggregate @ cum 4673.00
0.43 cum)
22.7 Vaccum de-watering with vaccum pump and suction mat and compaction Sqm 85.00
with skin floater clubbed with floating disc including cost of generator, HOM
of machinery, Screed Vibratory, Power Floater, blade and disc etc., with all
lead and lift.
22.8 Providing groove cutting for width of 5mm to 10mm and depth 80mm-
100mm including cost of cutting machine, generator & HOM of machinery,
including cost of blade, coolant etc., including cleaning of groove & providing
sand and hot bituminous fillars, and filler metal etc., including cost of
conveyance of all materials, labour, lead and lift charges and all other
incidental charges as per drawing and as per specifications.
Geosynthetic and
Reinforced Earth
23.2 KSRRB M700-2. Construction of a narrow filter sub-surface drain Narrow m 605.50
Filter Sub-Surface Drain consisting of porous or performed pipe laid in
narrow trench surrounded by a geotextiles filter fabric, with a minimum of
450 mm overlap of fabric and installed as per clause 700.2.3 and 300.9.3.5
including excavation and backfilling complete as per specifications.
23.3 KSRRB M700-3. Laying Paving Fabric Beneath a Pavement Overlay- Sqm 87.15
Providing and laying paving fabric with physical requirements as per Table
704-2 over a tack coat paving grade Bitumen 80-100 penetration, laid at the
rate of 1 kg per sqm over thoroughly cleaned and repaired surface to provide
a water resistant membrane and crack retarding layer. Paving fabric to be
free of wrinkling and folding and to be laid before cooling of tack coat,
brooming and rolling of surface with pneumatic roller to maximise paving
fabric contact with pavement surface complete as per specifications. MORTH
Specifications No.703
23.4 KSRRB M700-4. Laying Boulder Apron in Crates of Synthetic Geogrids:- cum 3939.00
Providing, preparing and laying of geogrids crated apron 1 m x 5 m, 600 mm
thick including excavation and backfilling with baffles at 1 metre interval,
made with geogrids having characteristics as per clause 700.4.2, joining sides
with connectors/rising staples, top corners to be tie tensioned, placing of
suitable cross interval ties in layers of 300 mm connecting opposite side with
lateral braces and tied with polymer braids to avoid bulging, constructed as
per clause 700.4.3. filled with stone with minimum size of 200 mm and
specific gravity not less than 2.65 packed with stone spalls, keyed to the
foundation recess in case of sloping ground and laid over a layer of
geotextiles to prevent migration of fines, all as per clause 700.4 and laid as
per cluase 200.5.3.3 approved design completes as specification MORTH
Specification No.704
Rate
Sl. No. Description Unit
Rs. Ps.
24.5 KSRRB M800-5.1. Over head Signs :- Providing and erecting over head signs Sqm 80780.00
with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised
with high intesity retro-reflective sheeting of encapsulted lense type with
vertical and lateral clearance given in clause 800.2.2 and 800.2.3 and
installed as per clause 800.2.7 over a designed support system of aluminium
alloy or galvanised steel trestles and trusses of sections and type as per
structural design requirements and approved plans complete as per
specifications.
24.10 KSRRB M800-10. Painting new letter and figures of any shade with synthetic cm 0.35
enamel paint black or any other approved colour to give an even shade
complete as per specifications. (“ii) English and Roman - Hyphen and the like
not to be measured and paid for”
24.13 KSRRB M800-12.1. Painting lines, dashes, arrows etc., on Roads in two coats Sqm 80.30
on Old Work :- Painting lines, dashes, arrows etc on roads in two coats on old
work with ready mixed road marking paint conforming to IS:164 on
bituminous surface, including cleaning the surface of all dirt, dust and other
foreign matter, demarcation at site and traffic control complete as per
specifications. i) Over 10 cm in width.
24.21 KSRRB M800-17. G.L. Barbed Wire Fencing 1.2 Metre High-Providing and m 242.75
fixing 1.2 metres high Gl barbed wire fencing with 1.8 m angle iron posts
40mm x 40 mm x 6 mm placed every 3 metres center to center founded in M-
15 grade cement concrete, 0.6 metre below ground level, every 15th post, last
but one end post and corner post shall be strutted on both sides and end post
on one side only and provided with 12 horizontal lines and 2 diagonals
interwoven with horizontal wires, fixed with GI staples, turn buckles etc
complete as per clause 800.7 as per specifications.
24.27 KSRRB M800-23.1. Metal Beam Crash Barrier :- Providing and erecting a “W” m 2503.00
metal beam crash barrier comprising of 3 mm thick corrugated sheet metal
beam rail, 70 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m
below ground/road level, all steel parts and fiftments to be galvanised by hot
dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to
be fixed on the vertical post with a spacer of channel section 150 x 75 x 5
mm, 330 mm long complete as per clause 800.10 complete as per
specifications. A. Type - A, “W”
24.33 KSRRB M800-28. Lighting on Bridges:- Providing and fixing lighting on Each 7865.00
bridges, mounted on steel hollow circular poles of standard specifications, 5
m high fixed on parapets with cement concrete, 20 m apart and fitted with
sodium vapour lamp complete as per specifications.
24.35 KSRRB M800-29.2. -do- Case-II : Double row for two utility services m 2980.00
24.36 KSRRB M800-29.3. -do- Case-III : Triple row for three utility services m 4395.00
24.37 KSRRB M800-33.1. Providing and erecting gantry mounted variable message Tonne 78330.00
sign board electronically operated capable of flashing the desired message
over a designed support system of aluminium alloy or galvanised steel,
erected as per approved design and drawings and with lateral clearance as
per clause 800.2.3 complete as per specifications.
24.39 KSRRB M800-34.2. Providing and installation of traffic impact attenuator at Sqm 1019.00
abutment/pier of flyovers bridges using plastic/steel barrels 0.60 m dia and
1.0 m in height, filled with sand in three rows and tied with 20 mm steel wire
rope as per approved design and drawings complete as per specifications. B.
Using plastic / steel Barrel, Filled with Sand
24.40 KSRRB M800-34.3. Providing and installing a patentend HI-DRO cell system Sqm 829.00
as a traffic impact attenuators, using plastic tubes 50 cm dia, 1.2 m in height,
25 mm opening at the top, placed in three rows, filled with water and tied
with a 20 mm steel wire rope complete as per specifications. (In this patented
HI-DRO cell system, water gets discharged from plastic tubes on impact over
a pre-determined time, thus absorbing the energy) C. With HI-DRO Cell
Sandwich (Patented)
24.42 KSRRB M800-36. Provision of red fluorescent with white reflective sleeve Nos 482.00
traffic cone made of low density polythylene (LDPE) material with a square
base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at
1.5 m interval, all as per BS:873 complete as per specifications.
24.43 KSRRB M800-39. Provision of a 2 m high (floor to roof) umbrella for traffic Nos 4086.00
policeman at road crossings, where necessary, installed on a raised platform,
built on a central support of a steel pipe 100 mm dia, roof made of 25 mm dia
steel pipe to provide covered area of 3 sqm, roofed with CGI sheets, all steel
parts to be given 2 coats of paint complete as per specifications.
24.44 KSRRB M800-43. Installation of a steel portable barricade with horizontal Each 2952.00
rail 300 mm wide, 2.5 m in length fitted on a ‘A’ frame made with 45 x 45 x 5
mm angle iron section, 1.5 m in height, horizonatal rail painted (2 coats)
with yellow and white stripes, 150 mm in width at an angle of 450, ‘A’ frame
painted with 2 coats of yellow paint, complete as per IRC:SP:55-2001.
complete as per specifications.
24.45 KSRRB M800-44.1. Construction of a permanent type barricade made of steel Each 4964.00
components, 1.5m high from road level, fitted with 3 horizontal rails 200 mm
wide and 4 m long on 50 x 50 x 5 mm angle iron vertical support, painted
with yellow and white strips, 150 mm in width at an angle of 450, complete
as per IRC:SP:55-2001 complete as per specifications.
24.46 KSRRB M800-44.2. Construction of a permanent type barricade made of Each 7709.00
wooden components, 1.5m high from road level, fitted with 3 horizontal
planks 200 mm wide and 3.66 m long on 100 x 100 mm wooden vertical post,
painted with yellow and white strips, 150 mm in width at an angle of 450,
complete as per IRC:SP:55-2001 complete as per specifications.
KSRRB M800-Flagman
24.49 KSRRB M800-46. Positioning of a smart flagman with a yellow vest and a Each 275.00
yellow cap and a red flag 600 x 600 mm security fastened to a start 1 m in
legth for guiding the trafic complete as per specifications.
24.50 Supplying and fixing in position new guard stones of granite/trap/sand Each 164.00
stone/shahabad roughly dressed, of size 700mm x 200 mm x 200 mm
including excavation, painting with white and black paint 15 cm wide strip
alternatively etc., complete.
24.51 Removing and refixing guard stones/KM stones/boundary stones, in a Each 23.80
complete manner embedded in earth excluding painting.
NOTE:
1 Lettering and arrow marks on sign board to be provided separately as
per actual requirement. Rates for these items have been analysed
separately.
2 Rate for excavation, cement concrete M-15 and painting may be taken
from respective chapters
3 Excavation and backfilling are incidental to work and not to be
measure separately.
4 In the case of median crash barrier, ‘W’ metal beam or their beam
section should be provided on both sides of the vertical posts fixed in
the median. Extra provision for metal beam railing and spacer is
required to be made when fixed in the median depending on approved
design.
Bridges - Pile
Foundation
MORTH / Chapter 12
25.1.1 -do- M30, 1000 mm dia piles m 16548.00
25.1.2 -do- M35, 1000 mm dia piles m 17927.00
Rate
Sl. No. Description Unit
Rs. Ps.
24.2 KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500 mm dia. piles with m 5175.00
OPC cement design mix M20 @ 320 kgs, with 20 mm and down size graded
granite metal coarse aggregates @ 0.69 cum and fine aggregates @ 0.46
cum, with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-
2008 excluding reinforcement as per drawings including cost of materials,
labour, HOM of machineries complete as per specifications.
MORTH / Chapter 12
25.2.1 -do- M30, 500 mm dia piles m 5750.00
25.2.2 -do- M35, 500 mm dia piles m 6220.00
25.3 KSRRB M1100-3.1. Bored cast-in-situ R.C.C. Pile with OPC cement design mix m 4755.00
M35 @ 390 kgs, with 20 mm and down size graded granite metal coarse
aggregates @ 0.68 cum and fine aggregates @ 0.45 cum, with
superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-2008,
excluding Reinforcement complete as per Drawing and Techinical
Specifications and removal of excavated earth with all lifts and lead upto
1000 m complete as per specifications. A Pile diametre=750 mm
25.22 KSRRB M1100-10.1. Cement Concrete for Reinforced Concrete in Pile Cap per cum 5075.00
Drawing and Technical Specification complete as per specifications. C. RCC
with OPC cement design mix M30 @ 360kgs, with 20mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregates @
0.46 cum, with superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed
- 2008.
25.26 KSRRB M1100-12. Providing an laying of PCC M15 levelling course 100 mm cum 3628.00
thick below the pile cap complete as per specifications.
MORTH Specifications No. 1100 & 1700
KSRRB M1100- Supplying, Fitting and Placing un-coated HYSD bar / MS Bar
25.27 KSRRB M1100-13. Supplying, Fitting and Placing un-coated TMT bar Tonne 62801.00
Reinforcement in Foundation as per Drawing and Technical Specifications
complete as per specifications.
MORTH Specifications No. 1600
25.27.1 _do_ TMT Bars Fe 415 Tonne 62801.00
25.27.2 _do_ TMT Bars Fe 500 Tonne 63431.00
25.27.3 _do_ TMT Bars Fe 550 Tonne 63997.00
Tonne 68028.00
25.28 KSRRB M1100-14. Supplying, Fitting and Placing un-coated Mild steel
Reinforcement in foundation as per drawing and technical specifications
complete as per specifications.
MORTH Specifications No. 1600
Note 1: Rate for 450 mm dia, 550 mm dia, 750 mm dia, piles and 1200
mm, dia. piles can be extrapolated as per proportion of pile cross-
sectional area.
Bridges - Well
Foundation
26.5.2 KSRRB M1200-3.2. ii) RCC with OPC cement design mix M25 @ 340 kgs, with cum 6245.00
20 mm and down size graded granite metal coarse aggregates @ 0.7 cum
and fine aggregates @ 0.47 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.3 KSRRB M1200-3.3. iii) RCC with OPC cement design mix M35 @ 390 kgs, with cum 6669.00
20 mm and down size graded granite metal coarse aggregates @ 0.68 cum
and fine aggregates @ 0.45 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.4 KSRRB M1200-4.1. i) PCC design mix M15 with OPC cement @240 kgs, with cum 4405.00
40 mm and down size graded granite metal coarse aggregates @ 0.63 cum
and fine aggregates @ 0.42 cum
26.5.5 KSRRB M1200-4.2. ii) PCC with OPC cement design mix M20 @300 kgs, with cum 5149.00
40 mm and down size graded granite metal coarse aggregates @ 0.64 cum
and fine aggregates @ 0.43 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008.
26.5.6 KSRRB M1200-4.3. iii) RCC with OPC cement design mix M20 @ 320 kgs, with cum 5538.00
20 mm and down size graded granite metal coarse aggregates @ 0.69 cum
and fine aggregates @ 0.46 cum, with supersplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.7 KSRRB M1200-4.4. iv) PCC with OPC cement design mix M25 @340kgs, with cum 5655.00
40mm and down size graded granite metal coarse aggregates @ 0.7 cum
and fine aggregates @ 0.47 cum, with supersplastisiser @ 3lts conforming to
IS9103-1999 Reaffirmed-2008
26.5.8 KSRRB M1200-4.5. v) RCC with OPC cement design mix M25 @340kgs, with cum 5745.00
20mm and down size graded granite metal coarse aggregates @ 0.7 cum
and fine aggregates @ 0.47 cum, with supersplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.9 KSRRB M1200-4.6. vi) PCC with OPC cement design mix M30 @360kgs, with cum 5805.00
40mm and down size graded granite metal coarse aggregates @ 0.69 cum
and fine aggregates @ 0.46 cum, with supersplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.10 KSRRB M1200-4.7. vii) RCC with OPC cement design mix M30 @360kgs, with cum 5895.00
20mm and down size graded granite metal coarse aggregates @ 0.69 cum
and fine aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.11 KSRRB M1200-4.8. viii) RCC with OPC cement design mix M35 @390kgs, with cum 6110.00
20mm and down size graded granite metal coarse aggregates @ 0.68 cum
and fine aggregates @ 0.45 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.12 KSRRB M1200-4.9. ix) RCC with OPC cement design mix M40 @420kgs, with cum 6110.00
20mm and down size graded granite metal coarse aggregates @ 0.67 cum
and fine aggregates @ 0.44 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008 - Using Batching Plant, Transit Mixer and
Concrete Pump MORTH Specification No.1200, 1500 & 1700
Rate
Sl. No. Description Unit
Rs. Ps.
26.6 KSRRB M1200-5.1. Plain / Reinforced Cement Concrete, in Well Foundation cum 5045.00
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe. C. Bottom Plug: i) PCC with 43 grade cement design mix
M20 @ 320 kgs, with 40mm and down size graded granite metal coarse
aggregates @ 0.69 cum and fine aggregates @ 0.46 cum, with
superplastisiser @ 3lts confirming to IS9103-1999 Reaffirmed-2008 - Case-I:
Using Concrete Mixer.
Case-II: Using Batching Plant, Transit Mixer and Crane / Concrete Pump
MORTH Specification No.1200, 1500 & 1700
26.8 KSRRB M1200-6.1. Plain / Reinforced Cement Concrete, in Well Foundation cum 5528.00
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe. ii) PCC with OPC cement design mix M25 @ 340 kgs, with
40mm and down size graded granite metal coarse aggregates @ 0.7 cum
and fine aggregates @ 0.47 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008.
Case-II: Using Batching Plant, Transit Mixer and Crane / Concrete Pump
MORTH Specification No.1200, 1500 & 1700
26.1 KSRRB M1200-7.1. Plain / Reinforced Cement Concrete, in Well Foundation cum 6214.00
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe iii) PCC with OPC cement design mix M30 @ 360 kgs, with
20mm and down size graded granite metal coarse aggregates @ 0.69 cum
and fine aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008.
Case-II: Using Batching Plant, Transit Mixer and Crane / Concrete Pump
MORTH Specification No.1200, 1500 & 1700
Rate
Sl. No. Description Unit
Rs. Ps.
26.12 KSRRB M1200-8.1. Plain / Reinforced Cement Concrete, in Well Foundation cum 6479.00
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe iv) PCC with OPC cement design mix M35 @ 390 kgs, with
40mm and down size graded granite metal coarse aggregates @ 0.68 cum
and fine aggregates @ 0.45 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008.
Case-II: Using Batching Plant, Transit Mixer and Crane / Concrete Pump
MORTH Specification No.1200, 1500 & 1700
26.14 KSRRB M1200-9.1. PCC with OPC cement design mix M20 @ 320 kgs, with cum 4820.00
40mm and down size graded granite metal coarse aggregates @ 0.69 cum
and fine aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to
IS9103-1999 Reaffirmed-2008.
26.15.2 KSRRB M1200-9.3. (iii) PCC with OPC cement design mix M30 @ 360 kgs, cum 6215.00
with 40mm and down size graded granite metal coarse aggregates @0.69
cum and fine aggregates @ 0.46 cum, with superplastisiser @ 3lts
confirming to IS9103-1999 Reaffirmed-2008
Case - II: Using Batching Plant, Transit Mixer and Crane / Concrete Pump
“MORTH Specification No.1200, 1500 & 1700
26.22 KSRRB M1200-11.3. Plain / Reinforced Cement Concrete, in Well Foundation cum 5235.00
complete as per Drawing and Technical Specification.
i) RCC with OPC cement design mix M20 @ 320kgs, with 20mm and down
size graded granite metal coarse aggregates @ 0.69cum and fine aggregates
@ 0.46cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed -2008.
26.24 “KSRRB M1200-11.5. Plain / Reinforced Cement Concrete, in Well cum 5575.00
Foundation complete as per Drawing and Technical Specification.
(iii) RCC with OPC cement design mix M30 @ 360kgs, with 20mm and down
size graded granite metal coarse aggregates @ 0.69cum and fine aggregates
@ 0.46cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed -2008.
26.28 “KSRRB M1200-11.12. Plain / Reinforced Cement Concrete, in Well cum 5720.00
Foundation complete as per Drawing and Technical Specification.
(v) RCC with OPC cement design mix M40 @ 420kgs, with 20mm and down
size graded granite metal coarse aggregates @ 0.67cum and fine aggregates
@ 0.44cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed -2008. Using Batching Plant, Transit Mixer and Crane / Concrete
Pump” MORTH Specification No.1200, 1500 & 1700
26.64 KSRRB M1200-20.2 -do- (ii) Beyond 3 m upto 10 m depth. Rate of sinking at m 3180.00
0.17 m/hour. MORTH Specification No. Section 1200
26.68 KSRRB M1200-21.1. Sinking of 6m external diameter well (other than m 1862.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth below bed level upto 3.00 m rate of
sinking at 0.33 m per hour
26.69 KSRRB M1200-21.2 -do- (ii) Beyond 3 m upto 10 m depth. Rate of sinking = m 4342.00
0.17 m per hour
MORTH Specification No. Section 1200
Rate
Sl. No. Description Unit
Rs. Ps.
26.73 KSRRB M1200-22.1. Sinking of 7m external diameter well (other than m 2495.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth below bed level upto 3.0 m. Rate of
sinking at = 0.22 m per hour
26.93 KSRRB M1200-26.1. Sinking of 11 m external diameter well (other than m 6342.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications. (i) Depth from bed level upto 3.0 m. Rate of
sinking at = 0.10 m / hour
(i) Depth below bed level upto 3.0 m. Rate of sinking at = 0.04 m / hour
MORTH Specification No. Section 1200
Rate
Sl. No. Description Unit
Rs. Ps.
26.99 KSRRB M1200-27.2 -do- m 25605.00
(ii) Beyond 3 m upto 10 m depth. Rate of sinking = 0.03 m per hour
MORTH Specification No. Section 1200
26.103 KSRRB M1200-28.1. Sinking of Twin D Type Well (other than pneumatic m 3532.00
method of sinking) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications.
(i) Depth below bed level upto 3.0 m. Rate of sinking at = 0.16 m / hour
MORTH Specification No. Section 1200
26.104 KSRRB M1200-28.2 -do- m 5785.00
(ii) Beyond 3 m upto 10 m depth. Rate of sinking = 0.15 m / hour
MORTH Specification No. Section 1200
26.107 KSRRB M1200-29. Sinking of 6m external diameter well (other than m 8730.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
(i) Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.25 m per hour
Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.22 m per hour
26.110 KSRRB M1200-32. Sinking of 9m external diameter well (other than m 8435.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.15 m per hour
MORTH Specification No. Section 1200
26.111 KSRRB M1200-33. Sinking of 10m external diameter well (other than m 9270.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.14 m/hour MORTH
Specification No.Section 1200
26.112 KSRRB M1200-34. Sinking of 11m external diameter well (other than m 20565.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.06 m / hour
Rate
Sl. No. Description Unit
Rs. Ps.
MORTH Specification No. Section 1200
26.113 KSRRB M1200-35. Sinking of 12m external diameter well (other than m 45465.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.25 m / hour
MORTH Specification No. Section 1200
26.114 KSRRB M1200-36. Sinking of Twin D Type Well (other than pneumatic m 10090.00
method of sinking) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications. Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.12 m /
hour MORTH Specification No. Section 1200
Depth in soft rock strata upto 3.0 m. Rate of sinking = 0.17 m / hour
MORTH Specification No. Section 1200
26.116 KSRRB M1200-38. Sinking of 7 m external diameter well (other than m 10550.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth in sinking is reckoned from bed level
complete as per specifications.
Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.17 m / hour MORTH
Specification No. Section 1200
26.117 KSRRB M1200-39. Sinking of 8 m external diameter well (other than m 10950.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.17 m / hour MORTH
Specification No. Section 1200
26.118 KSRRB M1200-40. Sinking of 9 m external diameter well (other than m 12530.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.15 m / hour
MORTH Specification No. Section 1200
26.119 KSRRB M1200-41. Sinking of 10 m external diameter well (other than m 13550.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.12 m / hour
MORTH Specification No. Section 1200
Rate
Sl. No. Description Unit
Rs. Ps.
26.120 KSRRB M1200-42. Sinking of 11 m external diameter well (other than m 29810.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.05 m / hour
MORTH Specification No. Section 1200
26.121 KSRRB M1200-43. Sinking of 12 m external diameter well (other than m 63590.00
pneumatic method of sinking) through all types of strata namely sandy soil,
clayey soil and rock as shown against each case, complete as per drawing
and technical specifications. Depth of sinking is reckoned from bed level
complete as per specifications.
Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.020 m / hour
MORTH Specification No. Section 1200
26.122 KSRRB M1200-44. Sinking of Twin D Type Well (other than pneumatic m 14240.00
method of sinking) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed level complete as per
specifications. Depth in hard rock strata upto 3.0 m. Rate of sinking = 0.10
m / hour MORTH Specification No. Section 1200
26.123 KSRRB M1200-45. Pneumatic sinking of wells with equipments of approved cum 52560.00
design, drawing and specifications worked by competent and trained
personnel and comprising of compression and decompression chambers,
reduces, two air locks separately for men and plant & materials,
arrangements valves, shafts made from steel plates of riveted construction
not less than 6mm thick to withstand an air pressure of 0.50 MPa,
conctrolled blasting of hard rock where required, staircases and 1 m wide
landing platforms with railing, arrangement for compression and
decompression, electric lighting of 50 V maximum, proper rooms for rest and
medical examinations and compliance with safety precautions as per
IS:4138, all as per clause 1200.7.6 of MORTH Specifications.
26.128 KSRRB M1200-49.1. Cast-in-Situ Cement Concrete M 20 Kerb with Channel. m 630.00
Construction of cement concrete kerb with channel with top and bottom
width 115 and 165 mm respectively, 250 mm high in M-20 grade PCC on M-
10 grade foundation 150 mm thick, kerb channel laid with lying machine,
foundation concrete laid manually, all complete as per clause 400.8 complete
as per specifications. B. Using Concrete Mixer
26.13 Providing and fixing 3m long 25mm dia TMT dowel bars 1.5m inserted in 50
mm dia holes drilled in hard rock and grouting in CM 1:1 including necessary
bending, hooking, cutting and handling charges complete, including the cost
of steel, (MORTH clause 1200).
26.130.1 -do- below LWL in open foundation upto 3m. Each 1197.00
26.130.2 -do- below LWL in open foundation beyond 3m. Each 1312.00
26.130.3 -do- for well foundation below LWL upto 3m. Each 1658.00
26.130.4 -do- for well foundation below LWL beyond 3m. Each 2120.00
Note: 1) KSRRB M 1200-13.3, 14.3, 15.3, 16.3, 17.3, 18.3, 19.3, 20.3, 21.3, 22.3,
23.3, 24.3, 25.3, 26.3, 27.3 and 28.3 beyond 10m upto 20m
a) Add 5% for every additional meter depth of sinking over the rate for
sinking of previous meter
2) KSRRB M1200-13.4, 14.4, 15.4, 16.4, 17.4, 18.4, 19.4, 20.3, 24.4, 22.4,
23.4, 24.4, 25.4, 26.4, 27.4 and 28.4 beyond 20m upto 30m
a) Add 7.5% for every additional meters of depth of sinking over the rate
of sinking for the previous meter
b) Add 20% of cost for Kentledge including supports, loading
arrangement and labour where cost is 80% of finished rate of previous
meter
3) KSRRB M 1200- 13.5, 14.5, 15.5, 16.5, 17.5, 18.5, 19.5, 20.5, 21.5, 22.5,
23.5, 24.5, 26.5, 27.5 and 28.5 beyond 30m upto 40m.
a) Add 10% for every additional meters of depth of sinking over the rate
of sinking for the previous meter
b) Add 20% of cost for Kentledge including supports, loading
arrangements and labour where cost is 80% of finished rate of
previous meter.
Rate
Sl. No. Description Unit
Rs. Ps.
Bridges - Open
Foundation
Rate
Sl. No. Description Unit
Rs. Ps.
27.3 KSRRB M2100-1.3. -do- (iii) Above 6 m depth MORTH Specification No. 304 cum 144.80
27.4 “KSRRB M2100-2.1. Earth work in excavation for foundation of structures as cum 38.30
per drawing and technical specifications, including setting out, construction
of shoring and bracing, removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with approved material
complete as specifications. B. Mechanical Means (i) Depth upto 3m”
27.11 KSRRB 2100-5. Excavation in Marshy soil upto 3m depth for foundations of cum 401.50
structures as per drawing and technical specifications including removing
the excavated stuff to a lead of 15m, including dewatering, shoring and
shuttering, refilling trenches in 250mm layers, wherever necessary watering
and ramming, including cost of materials, labour complete as per
specifications.
MORTH Chapter 12
21.12 “KSRRB M2100-5.1. Earth work in excavation for foundation of structures as cum 293.20
per drawing and technical specifications, including setting out, constructions
of shoring and bracing, removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with approved material
complete as per specifications. “V. Marshy soil - (Manual Means Upto 3 m
depth
MORTH Chapter 12
KSRRB M2100 Back Filling of abutments using wing wall & Returns
27.15 “KSRRB M2100-7. Earth work in excavation for foundation of structures as cum 185.45
per drawing and technical specifications, including setting out, constructions
of shoring and bracing, removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with approved material
complete as per specifications. “VI. Backfilling in Marshy Foundation Pits.”
27.19 KSRRB M2100-11. Brick Masonry Work in Cement Mortar 1:3 in Foundation cum 5088.00
complete excluding Pointing and Plastering as per Drawing and Technical
Specifications MORTH Specification No.1300
27.20 KSRRB M2100-11.1. Cement Mortar 1:3 (1 Cement : 3 sand) cum 4990.00
27.22 “KSRRB M2100-12.1. Stone Masonry Work in Cement Mortar 1:3 in cum 3145.00
Foundation complete excluding Drawing and Technical Specifications A.
Square Rubble Masonry (Coursed / Uncoursed)
MORTH Specification No.1405.4
27.23 “KSRRB M2100-12.2. Stone Masonry Work in Cement Mortar 1:3 in cum 3134.00
Foundation complete excluding Drawing and Technical Specifications B.
Square Rubble Masonry (Coursed / Uncoursed)
MORTH Specification No.1405.4
27.24 KSRRB M2100-13. Plain / Reinforced Cement Concrete M15 with OPC cement cum 4163.00
@240 kgs, with 40mm and down size graded granite metal coarse aggregate
@0.84 cum and fine aggregates @0.56cum in Open Foundation complete as
per Drawing and Technical Specifications.
27.31 KSRRB M2100-17.2. Plain/ Reinforced Cement Concrete idesign mix M25 cum 5173.00
with OPC cement @ 340 kgs, with 20mm and down size graded granite metal
coarse aggregate @0.70 cum and fine aggregates @0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Open
Foundation complete as per Drawing and Technical Specifications.
Case - II: Using Batching Plant, Transit Mixer and Concrete Pump
MORTH Specification No.1500, 1700 & 2100
27.32 KSRRB M2100-18.1. Plain/ Reinforced Cement Concrete in Open Foundation cum 5480.00
with OPC cement design mix M30 @ 360 kgs, with 40mm and down size
graded granite metal coarse aggregate @0.69 cum and fine aggregates
@0.46cum, with superplastisiser @3lts confirming to IS9103-1999
Reaffirmed-2010, complete as per Drawing and Technical Specifications.
Case - I: Using Concrete Mixer
Case - II: Using Batching Plant, Transit Mixer and Concrete Pump
MORTH Specification No.1500, 1700 & 2100
27.34 KSRRB M2100-19.1. Plain/ Reinforced Cement Concrete in Open Foundation cum 5562.00
with OPC cement design mix M30 @ 360 kgs, with 20mm and down size
graded granite metal coarse aggregate @0.69 cum and fine aggregates
@0.46cum, with superplastisiser @3lts confirming to IS9103-1999
Reaffirmed-2008, complete as per Drawing and Technical Specifications.
Case - I: Using Concrete Mixer
Note: 1)
KSRRB M2100-1.1, KSRRB M2100-1.2, KSRRB M2100-1.3, KSRRB
M2100-2.1, KSRRB M2100-2.2, KSRRB M2100-2.3, KSRRB M2100-3.1,
3.2, 4.1, 4.2 Add 10% extra for dewatering charges and specification is
to be modified accordingly.
2) KSRRB M2100-5.1: Add 30% extra for dewatering charges and
specification is to be modified accordingly.
3) KSRRB M2100-5.2: Add 20% extra for dewatering charges and
specification is to be modified accordingly.
4) Add 15% extra for shoring and shuttering for items KSRRB M2100-5.1
specification is to be modified accordingly.
5) Add 10% extra for shoring and shuttering for items KSRRB M2100-5.2
specification is to be modified accordingly.
6) In case of rock, foundation beyond 3m is not dug and hence not
included.
7)
It is assumed that Marshy soil will be available upto 3m depth only.
Rate
Sl. No. Description Unit
Rs. Ps.
Bridges -
Sub Structure
Rate
Sl. No. Description Unit
Rs. Ps.
b) upto 5 m height
28.7.3. KSRRB M2200-5.3 Design mix M25 with OPC cement @ 340kgs, with 40mm cum 5627.00
and down size graded granite metal coarse aggregates @0.7 cum and fine
aggregates @ 0.47 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008.
c) - i) upto 5 m height
28.7.4. KSRRB M2200-5.4. Design mix M25 with OPC cement @ 340kgs, with 40mm cum 5830.00
and down size graded granite metal coarse aggregates @0.7 cum and fine
aggregates @ 0.47 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008.
28.7.6. KSRRB M2200-5.6. Design mix M30 with OPC cement @ 360kgs, with 40mm cum 5765.00
and down size graded granite metal coarse aggregates @0.69 cum and fine
aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008.
- i) upto 5 m height
28.7.7. KSRRB M2200-5.7. Design mix M30 with OPC cement @ 360kgs, with 40mm cum 5975.00
and down size graded granite metal coarse aggregates @0.69 cum and fine
aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008.
i) upto 5 m height.
28.7.10. KSRRB M2200-5.10. Design mix M20 with OPC cement @ 320kgs, with 20mm cum 5730.00
and down size graded granite metal coarse aggregates @0.69 cum and fine
aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008.
28.7.17. KSRRB M2200-5.17. Design mix M30 with OPC cement @ 360kgs, with 20mm cum 6265.00
and down size graded granite metal coarse aggregates @0.69 cum and fine
aggregates @ 0.46 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008.
i) Upto 5 m height,
28.7.19. KSRRB M2200-5.19. Design mix M35 with OPC cement @ 390kgs, with 20mm cum 6244.00
and down size graded granite metal coarse aggregates @0.68 cum and fine
aggregates @ 0.45 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008. i) For height, upto 10 m,
28.7.20. KSRRB M2200-5.20. Design mix M35 with OPC cement @ 390kgs, with 20mm cum 6440.00
and down size graded granite metal coarse aggregates @0.68 cum and fine
aggregates @ 0.45 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008. i) For height, above 10 m,
28.7.21. PCC grade M15 with OPC cement @ 240kgs, with 40mm and down size cum 4523.00
graded granite metal coarse aggregates @0.63 cum and fine aggregates @
0.42 cum above 5mtr height
28.7.22. PCC grade design mix M20 with OPC cement @ 300kgs, with 40mm and cum 5240.00
down size graded granite metal coarse aggregates @0.64 cum and fine
aggregates @ 0.43 cum, with superplastisiser @ 3lts confirming to IS9103-
1999 Reaffirmed-2008, above 5mtr height
Note: 1) In case of stone masonry, the size of the weep hole shall be 150 mm x 80
mm or circular with 150 mm diameter.
2) For structure in stone masonry, the weep holes shall be deemed to be
included in the item of stone masonry work and shall not be paid
separately.
Bridges - Concrete
Superstructure
Bridges - Concrete
Superstructure
Rate
Sl. No. Description Unit
Rs. Ps.
Case -I : Using Concrete Mixer MORTH Specification No.1500, 1600 & 1700
Case -II : Using Concrete Mixer MORTH Specification No.1500, 1600 & 1700
Case -II : Using Batching Plant, Transit Mixer & Concrete Pump-
MORTH Specification No.1500, 1600 & 1700
29.3.1 Height upto 5 m cum 5715.00
29.3.2 Height 5 m to 10 m cum 5942.00
29.3.3 Height 10 m to 15 m cum 6170.00
29.3.4 Height 15 m to 20 m cum 6380.00
29.3.5 Height above 20 m cum 6605.00
29.4 T - Beams & slabs
KSRRB M2300-2.2. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. A. RCC - with OPC cement design mix M20 @
320 kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46 cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008.
Case -II : Using Batching Plant, Transit Mixer & Concrete Pump-
MORTH Specification No.1500, 1600 & 1700
Case -II : Using Batching Plant, Transit Mixer & Concrete Pump
MORTH Specification No.1500, 1600 & 1700 cum 5945.00
29.7.1 Height upto 5 m cum 6182.00
29.7.2 Height 5 m to 10 m cum 6420.00
29.7.3 Height 10 m to 15 m cum 6640.00
29.7.4 Height 15 m to 20 m cum 6875.00
29.7.5 Height above 20 m
Case -II : Using Batching Plant, Transit Mixer & Concrete Pump
MORTH Specification No.1500, 1600 & 1700
29.8.1 Height upto 5 m cum 6182.00
29.8.2 Height 5 m to 10 m cum 6420.00
29.8.3 Height 10 m to 15 m cum 6655.00
29.8.4 Height 15 m to 20 m cum 6875.00
29.8.5 Height above 20 m cum 7110.00
29.9 Solid slab super structure
KSRRB M2300-5.1. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. C. RCC - with OPC cement design mix M30 @
360 kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46 cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008.
29.22 T - Beams & slabs including launching of precast girder by launching truss
upto 40m span
KSRRB M2300-10.2. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. RCC with OPC cement design mix M40 @ 420
kgs, with 20mm and down size graded granite metal coarse aggregates
@0.67cum and fine aggregates @ 0.44 cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008. Case -II : Using Batching Plant,
Transit Mixer & Concrete Pump
29.25 T - Beams & slabs including launching of precast girder by launching truss
upto 40m span
KSRRB M2300-11.2. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. F. PSC with OPC cement design mix M45 @
440 kgs, with 20mm and down size graded granite metal coarse aggregates
@0.66cum and fine aggregates @ 0.44 cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008.
29.31 KSRRB M2300-16. Providing and laying Cement concrete wearing coat with cum 10320.00
OPC cement design mix M30 @ 360 kgs, with 20mm and down size graded
granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.46
cum, with superplastisiser @ 3lts confirming to ISI9103-1999 Reaffirmed-
2008 including reinforcement complete as per drawing and Technical
Specifications complete as per specifications. MORTH Specification No.2702
Rate
Sl. No. Description Unit
Rs. Ps.
30.16 KSRRB M2500-13 Gabian structure for Erosion Control, River Training cum 4940.00
Works and Protection works Providing and constructing gabian structures
for erosion control, river training works and protection works with wire
crates of size 2 m x 1 m x 0.3 m each divided into 1m compartments by cross
netting, made from 4 mm galvanised steel wire @ 32 kg per 10 sqm having
minimum tensile strength of 300 Mpa conforming to IS : 280 and galvanizing
coating conforming to IS : 4826, woven into mesh with double twist, mesh
size not exceeding 100mm x 100mm, filled with boulders with least
dimension of 200 mm, all loose ends to be securely tied with 4 mm galvanised
steel wire complete as per specifications.
Expansion Joints
Rate
Sl. No. Description Unit
Rs. Ps.
31.7 KSRRB M2600-7. Providing and laying of an elastomeric slab steel expansion m 15980.00
joint, catering to right or skew (less than 20 deg, moderately curved with
maximum horizontal movement upto 50mm, complete as per approved
drawings and standard specifications to be installed by the
manufacturer/supplier or their authorised representative ensuring
compliance to the manufacturer’s instructions for installation and clause
2600.6 of MORTH Specifications for road & bridge works complete as per
specifications.
31.8 KSRRB M2600-8. Providing and laying of compression seal joint consisting to m 19122.00
steel armoured nosing at two edges of the joint gap suitably anchored to the
deck concrete and a preformed, chloroprene elastomer or closed cell foam
joint sealer compressed and fixed into the joint gap with special adhesive
binder to cater for a horizontal movement upto 40 mm and vertical
movement of 3 mm complete as per specifications
31.9 KSRRB M2600-9. Providing and laying of a strip seal expansion joint catering m 15554.00
to maximum horizontal movement upto 70 mm, complete as per approved
drawings and standard specifications to be installed by the
manufacturer/supplier or their authorised representative ensuring
compliance to the manufacturer’s instructions for installation complete as
per specifications.
31.10 KSRRB M2600-10. Providing and laying of a modular strip Box seal m 6864.00
expansion joint including anchorage catering to a horizontal movement
beyond 70 mm and upto 140 mm, complete as per approved drawings and
standard specifications to be installed by the manufacturer/supplier or their
authorised representative ensuring compliance to the manufacturer’s
instructions for installation complete as per specifications.
32.9 KSRRB M2700-9. Providing, Precasting transportation and placed in position cum 20508.00
precast pretensioned concrete girders as per drawings and technical
specifications complete as per specifications.
MORTH Specification No. 1800 & 2300
32.10 KSRRB M2700-10. Providing and fixing Helical Pipes in voided concrete slabs m 340.00
complete as per specifications.
MORTH specification No.1700 & 1800
33.1 KSRRB M2800-1. Removal of existing cement concrete wearing coat Sqm 65.00
including its disposal complete as per Technical Specification without
causing any detrimental effect to any part of the bridge structure and
removal of dismantled material with all lifts and lead complete as per
specifications.
33.2 KSRRB M2800-2. Removal of existing asphaltic wearing coat comprising of Sqm 48.90
50 mm thick asphaltic concert laid over 12 mm thick mastic asphalt
including disposal with all lift and lead complete as per specifications.
33.3 KSRRB M2800-3. Guniting concrete surface with cement mortar applied with Sqm 534.25
compressor after cleaning surface and spraying with epoxy complete as per
specification.
MORTH Specification No. 2807
33.4 KSRRB M2800-4. Providing and inserting nipples with approved fixing No. 67.40
compound after drilling holes for grouting as per Technical Specifications
including subsequent cutting/removal and sealing of the hole as necessary of
nipples after completion of grouting with Cement / Epoxy complete as per
specification.
33.1 KSRRB M2800-9. Removal of defective concrete, cleaning the surface Sqm 248.85
thoroughly, applying the shotcrete mixture mechanically with compressed
air under pressure, compressing of cement, sand, coarse aggregates, water
and quick setting compound in the proportion as per clause 2800.7.1. sand
and coarse aggregates conforming to IS: 383 and table 1 of IS:9012
respectively, water cement ratio ranging from o.35 to 0.50, density of gunite
not less than 2000 kg/cum, strength not less than 25 Mpa and workmanship
conforming to clause 2800.7.6. complete as per specifications. MORTH
Specification No.2807
33.11 KSRRB M2800-10. Applying Pre-packed cement based polymer mortar of Sqm 390.00
strength 45 Mpa at 28 days for replacement of spalled concrete complete as
per specifications. MORTH Specification No.2800
33.12 KSRRB M2800-11. Eproxy bonding of new concrete to old concrete complete Sqm 592.60
as per specifications. MORTH Specification No.2800
33.13 KSRRB M2800-12.1. Providing external prestressing with high tensile steel Tonne 432900.00
wires / strands for taking output of 1 MT, including drilling for passage of
prestessing steel, all accessories for stressing and stressing operation and
grouting complete as per drawing and Technical Specification.
33.15 KSRRB M2800-12.3. Providing external prestressing with high tensile steel Tonne 299250.00
wires / strands for taking output of 9.28 MT, including drilling for passage of
prestessing steel, all accessories for stressing and stressing opeartion and
grouting complete as per drawings and Technical Specification MORTH
Specification No. 2810
33.23 KSRRB M2800-20. Repair of RCC Railing Carrying out repair of RCC M-30 m 108.20
railing to bring it to the original shape complete as per specifications.
33.24 KSRRB M2800-21. Repair of Steel Railing to bring it to the original shape m 305.20
complete as per specifications.
Pipe Culverts
Rate
Sl. No. Description Unit
Rs. Ps.
34 Pipe Culverts
34.1 KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone cum 3754.00
aggregate 40 mm nominal size mechanically mixed, placed in foundation
and compacted by vibration including curing for 14 days complete as per
specifications.
34.2 KSRRB M2900.2.1. Laying Reinforced cement concrete pipe NP4 / m 9300.00
prestressed concrete pipe for culverts on first class bedding of granular
material in single row including fixing collar with cement mortar 1:2 but
excluding excavation, protection works, backfilling, concrete and masonry
works in head walls and parapets complete as per specifications.\
34.4 KSRRB M2900-3.1. Laying Reinforced cement concrete pipe NP4 / m 18640.00
Prestressed concrete pipe for culverts on first class bedding of granular
mateirial in double row including fixing collar with cement mortar 1:2 but
excluding excavation, protection works, backfilling, concrete and mosonry
works in head walls and parapets complete as per specifications.
34.7 Providing and laying reinforced cement concrete pipe NP2 for culverts
including pointing ends, and fixing collars with cement mortar 1:2 including
cost of all materials, labour, curing complete as per specifications.
NOTE:
1 In case of cement cradle bedding, quantity of PCC M-15 is to be
calculated as per design and priced separately and added.
Maintenance
of roads
Rate
Sl. No. Description Unit
Rs. Ps.
35 Maintenance of Roads
KSRRB M3000-Restoration of Rain Cuts
35.1 KSRRB M3000-1. Restoration of rain cuts with soil, moorum, gravel or a m 68.50
mixture of these, clearing the loose soil, benching for 300 mm width, laying
fresh material in layers not exceeding 250 mm and compacting with plate
compactor or power rammers to restore the original alignment, levels and
slopes complete as per specifications.
35.9 KSRRB M3000-9. Removal of existing sealant and re sealing of conctraction, m 31.00
longitudinal or expansion joints in concrete pavement with fresh sealant
material complete as per specifications.
MORTH Specification No. 3005.2
35.10 KSRRB M3000-10. Removal of earth from the choked hill side drain and m 25.05
disposing it on the valley side manually complete as per specifications.
MORTH Specification No. 3000
35.11 KSRRB M3000-11. Clearance of land slides in soil and ordinary rock by a bull- cum 9.95
dozer D 80 A-12, 180 HP and disposal of the same on the valley side complete
as per specifications
MORTH Specification No. 3000
35.12 KSRRB M3000-12. Clearing of land slide in hard rock requiring blasting for cum 46.85
50% of the boulders and disposal of the same on the valley side complete as
per specifications.
MORTH Specification No. 3000
NOTE :
1) The earth stripped from earthen shoulders to be dumped on the side
slopes locally for disposal.
2) The constituents of epoxy mortary/epoxy concrete will be as per the
instruction and manual of the manufacturer.
3) KSRRB 3000-5. If the depth of the Pothole is more than 40mm, suitable
items specified in the SR such as WMM, WBM, BM or DBM (or
combination of these) may be adopted up to desired depth as per site
condition and payment made as per measured quantities.
Rate
Sl. No. Description Unit
Rs. Ps.
Reinforced Earth
Structure
Rate
Sl. No. Description Unit
Rs. Ps.
36.2 KSRRB M3100-3. Assembling, jointing and laying of reinforcing elements B. Sqm 383.00
With reinforcing element of synthetic geogrids
MORTH Specification No. 3102
NOTE :
1 The specification and construction details to be adopted shall be as per
section 3100 of MORTH Specification.
2 Drainage arrangement shall be made as per approved design and
drawings.
3 The quantity of filler media shall be calculated as per approved design
and specifications and shall be priced separately. The rate for same to
be adopted from chapter 15.
4 For compaction of Earthwork, attention is invited to clause 3105.5 of
MORTH Specification.
5 Length of reinforcing strips will vary with the height of wall and will be
as per approved design and drawings.
6 The earth fill material shall be clean, free draining, granular with high
friction and low cohesin, non-corrosive, coarse granied with not 10
percent of particles passing 75 micron, sieve, free of any deleterious
matter, chlorides, salts, acids, alkalie.
Other Items
Rate
Sl. No. Description Unit
Rs. Ps.
37.3 Providing chain link fencing 50mm size of 8 guage property stretched Sqm 608.50
between rectangular poles and fixed with suitable bolts & nuts, the free ends
shall be welded to the pole and block pipe at top and bottom as required
including cost of all materials, labour, lead and lifts and as per the directions
of the Engineer-in-charge of work including two coats of approved quantity
paint over one coat of shop paint.
37.4 Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 m 278.30
including removing the bends, cutting the pipe, and fixing pipe in between
the two verticle poles (M.S. rectangular poles) and spot welding the chain
link with M.S. block pipe including cost of all materials wastage in cutting,
and scaffolding wherever necessary with all lead and lift as directed by the
Engineer-in-charge of work etc., complete including two coats of approved
quantity paint over one coat of shop paint.
37.5 Providing barbed GI wire fencing of 12x12 gauge drawn into stone pillars or m 24.50
iron pillars including drawing in holes wherever necessary excluding the cost
of pillars but including the cost of barbed wire and binding wire etc,.
complete.
37.6 Providing corrugated cement asbestos Ridge sheets set in C.M. 1:3 and m 347.60
pointed with C.M. 1:3.
37.7 Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M. 1:2 m 144.90
37.13 repairing and fixing shutters (panelled or glazed) to doors, windows, Sqm 311.85
ventilators and cupboards.
Rate
Sl. No. Description Unit
Rs. Ps.
37.14 Fixing old eve board with necessary screws and approved painting two coats. m 11.85
37.15 Providing and fixing plain rolled glass 3mm thick with T.W. beading of 10mm Sqm 670.50
thick.
37.16 Providing and fixing 4mm thick glass panes to steel windows including T.W. Sqm 759.60
beading of 10 mm thick and 2 coats of approved paints.
37.42 Dismantling Mangalore tiles roofs and stacking the material within a rdius
of 50 meters.
37.42.1 -do- with reepers. Sqm 34.80
37.42.2 -do- without reepers. Sqm 23.20
37.42.3 -do- A.C. Sheet roofing. Sqm 46.41
37.43 Dismantling CI or AC rain water Pipes with fittings and clamps and stacking Sqm 11.55
the materials with a lead of 50 meters.
37.44 Dismantling weather proof course and removing and conveying the debris to cum 347.00
a distance upto 200m.
37.45 Dismantling Madras terrace jack arch roof including rafters and stacking the Sqm 115.60
materials with a lead upto 50m and removing the debris to a distance upto
200m.
37.46 Dismantling stone slab roofling over wooden reepers or RCC battens Sqm 115.65
(dismantling reepers and batteens to be paid for separately) including
stacking of serviceable materials and disposal of unserviceable within 200m
lead (with in average thickness of 10 cms)
37.47 Dismantling burnt brick masonry in clay mortar/lime mortar/cement Sqm 115.65
mortar and stacking the bricks within a radius of 50m and removing the
debris to a distance upto 200m.
37.48 Dismantling size stone masonry in clay mortar and stacking the size stone cum 127.20
within a radius of 50m and removing the debris to a distance upto 200m.
37.49 Dismantling the tile work in floor and roof laid in cement or surki mortar Sqm 23.15
including stacking the materials with in 50m lead of tiles thickness 10mm to
25mm.
37.50 Dismantling plastering and removing the debris with a lead upto 200m. Sqm 17.35
37.51 Dismantling cement concrete flooring or plain cement concrete work Sqm 40.50
including removing and conveying the debris to distance upto 200m (within
average thickness of 15 cms)
37.52 Dismantling barbed wire or flexible wirer rope in fencing including making m 3.45
rolls and stacking within 50m lead.
37.53 Dismantling expanded metal or IRC fabric with weld mesh necessary battens Sqm 11.55
and beading etc., including stacking the serviceable materials within 50 m
lead.
37.54 Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge Sqm 991.30
with Mathi or Nandi wood patties of 50 mm x 12 mm size, including two
coats approved paint etc., complete. (Including cost of screws)
37.6 Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in Each 4800.00
reinforced cement concrete poles of size 0.10x0.10x2.60 mtrs in cement
concrete M 20 proportion using 20mm and down size graded metal machine
mixed with 10mm dia main steel bars and 8mm dia stirpes as shown in
drawing. The board shall be provided with with 12mm thick cement plaster
in cement mortar 1:3 on both the sides. The poles shall be embedded in the
ground for a depth of 0.5 mtrs with cement concrete M 10 proportion. The
board shall be fixed as per the drawing and at the place indicated by the
Engineering charge of the work. The cost includes excavation, cost of all
materials, cost of steel, centering, transportation charges, fixing charges etc.,
The work shall be carried out as per the detailed specifications, drawings
and directions of the Engineer in charge of the work.
37.61 Providing and fixing sign board of size 60x60cm equipment triangle using
M.S. sheet 5mm thick with RCC pole of size 0.15x0.15x2.3 mtr made out of
cement concrete M 20 proportion using 20mm and down size graded metal
machine mixed with 10mm dia main steel bars and 8mm dia stirupps as
shown in drawing. The poles shall be embedded in the ground for a depth of
0.6mtrs with cement concrete M 10 proportion. The board shall be fixed as
per the drawing and at the places indicated by the Engineering charge of the
work. The cost includes excavation, cost of all materials, cost of steel,
cenetering, transportation charges, fixing charges etc., The work shall be
carried out as per the detailed specifications, drawings and directions of the
Engineeer in charge of the work.
37.62 Providing and constructing informatory name board of size 1.75m x 1.75m Each 3500.00
with Burnt brick masonry in CM 1:6 with non-modular bricks of standard
size of class designation 50(table moulded). The foundation shall be provided
with cement concrete M 7.5 for a depth of 10cms and with size stone
masonry with Cement Mortar 1:6 and copping concrete with cement
concrete M 10 as indicated in the drawing. The name board shall be provided
with 12mm thick plaster in CM 1:6 on both the sides including rounding of
corners. The name board shall be provided with painting with 2 coats of
enamel paint. The board shall be fixed as per the drawing and at the place
indicated by the Engineering charge of the work. The cost includes
excavation, cost of all materials, centering, transportation charges, fixing
charges etc., The work shall be carried out as per detailed specification,
drawings and directions of the Engneer in charge of the work.
Rate
Sl. No. Description Unit
Rs. Ps.
Innovative Items
Rate
Sl. No. Description Unit
Rs. Ps.
General notes
1 The material component rate indicated in the SR are the prevailing market rates inclusive of taxes, duties,
contractor’s profit, 10% over head charges, loading and unloading charges. Extra lead, loading and
unloading charges shall not be added except otherwise mentioned in specific cases.
3 quality :
For ensuring the quality aspect of the materials used by the contractors, it is necessary that the contrator
shall furnish the quality control test certificates for these materials, Department will have the right to get
these materials tested at the cost of contrator.
4 procedure for adoption :
The rates of innovative items included in this volume are expensive over the conventional items, but highly
effective performance wise. Hence these items shall be used effectively and judiciously duly adopting the
following procedures :
a) Site Engineer / Sub-Divisional Officer shall identity the specific work for adoption of these items with
proper justification and report.
b) Assistant Executive Engineer, quality assurance shall furnish his opinion on this report.
c) Executive Engineer shall examine the necessary of the proposal and submit to Superintending Engineer
5 Inspection :
The work shall be got inspected by SE /EE QA during execution and after completion and obtain report.
7 comments / suggestions :
Comments, suggestions with reference to the specification, rates and additions if any, may please be
Office of the
Superintending Engineer, Tele : 2520644/2443405
KPWP & IWTD, Mysore Circle, Fax :2446851
Mysore-570010 E-mail : semys@kpwd.gob.in
Rate
Sl. No. Description Unit
Rs. Ps.
Cracks will be sealed using suitable sealant or patching mortar. These make
them ideally suited for joint treatment. Its adhesion is very strong & bind
with the building materials such as concrete, and take care of expansion and
contraction in the structures.
The factory made dry CEMENTATIONS silica sand power consisting of dry
cement mortar (1 cement : 4 silica sand) shall be mixed with additives like
ISOPROOF chemical and acrylic polymer and water to arrive at workable
consistency. The same shall be applied over the prepared surface to give even
surface and act as base for geo-textile fabric.
7) Primer Coat
A mixture of acrylic monomer (1:1) ISOPROOF & water mixed in proper
proportion will be applied on the geotextile membrane.
8) Final Coat
Methodology :
Mixing : Admixture must be added to the concrete at the time of batching at
0.8% by weight of cement. The sequence of procedures for addition will vary
according to the type of batch plant operation and equipment.
Methodology :
The surface shall be pre damped with water. The water shall be mixed
powder in the ratio of 3 powder:1 water mixing thoroughly with a slow
speed drill fitted at a speed RPM of 282640. The final crystaline slurry shall
be applied with a soft brush bloom at average of 1 kg / sqm area. Curing
shall be minimum of 48 hour by treating the surface by fog spray 3 to 4 time
a day. Acrylic / Liquid polymer compound shall be mixed with water by
means of using a slow speed drill mixer 500 RPM and gradually adding the
powder component to the liquid avoiding lump formation and mixed for 2 to
4 minutes. The slurry shall be applied using stiff brush in 2 coats that forms 1
mm thick. (0.5 mm thick each coat) Curing shall be minimum of 48 hour by
treating the surface by fog spray 3 to 4 time a day. Protection layer such as
plastering or concrete screen shall be applied on the water proof membrane
surface.
38.8 COVING
Providing and laying 12mm thick coving at the junction of slab and vertical Rmtr 145
offsets with CM 1:3 admixed with modified styrene butadiene rubber
emulsion (confirming to BS 6319) specially designed for use as a bonding aid
and gauging liquid for cementations system (5 ltrs for 50 kg cement).
Methodology :
Modified styrene butadiene rubber emulsion shall be added to dry mix of
cement mortar of 1:3 (5 ltrs for 1 bag of cement and 3 bags of cement) mixed
thoroughly by adding water 0.35 water cement ratio and peddling for 2
minutes.
38.9 Swellable rapid expansion water proofing for construction joints in all types
of concrete works / composite works.
Providing and water proofing treatment to construction joints of all types of m 500
concrete works using swellable rapid expansion in water. Water stop
capable of expanding 215% in 120 hours, when immersed potable water
Conforming to ASTM D297 & ASTM D 6 Standard.
Methodology :
The water stopper shall be laid as per following steps :
i) Clean the surface sufficiently to receive the water stopper.
ii) Apply a coat of primer to the area where water stopper is to be laid placed at
an application rate of 240 running meters per 3.78 Liters of primer (primer
is supplied along with water stopper)
iii) Using moderate hand pressure with the heel of the hand, press a continuous
bead of Water stopper firmly into the position. Make sure that the product
has bonded to the primed area.
iv) Peel the protective backing form the exposed side of the water stop and
tightly butt the coil ends to form a continuous water stop. Do not overlap the
water stop.
v) Follow standard concrete pouring procedures here after.
The proposed water stopper shall be used for the following situations :
Methodology :
1) The first part consisting of grouting the porous slab area with non-shrink
cementatious grout (if required).
2)
The second part consisting of treating the cracks and construction joints by
routing-out to a minimum 20mm x 20mm grove and treating with
crystalisation Mortar, First it is primed with crystalisation slurry and later
filled with crystalisation mortar and later again a coat of crystalisation
slurry.
Rate
Sl. No. Description Unit
Rs. Ps.
3) The third part consisting of making required slopes at the interface joint of
the toilet slab and masonry wall with crystalisation Mortar.
4) The fourth part consisting of sealing / packing all joints of outlet pipes. etc.,
with crystalisation mortar.
5)
The fifth part consisting of providing and applying in depth Crystaline
Waterproofing System @ 1.4 kgs/sqm in 2 coats to permanently fix non-
soluble crystaline growth throughout the capillary tracts and pores of
concrete. The In-depth Crystalline waterproofing Material shall be applied
by brushing as per manufacturer’s specification. on the entire toilet sunken
slab and walls.
38.12 self curing compounding for concrete surface (water/wax/based) : Providing L 110
& applying water based (WB) / wax based low viscosity wax emulsion curing
compound membrane / layer applied in the form of spray over the concrete
surface. The material consists of all self curing compound membrane
satisfying ASTM C 309-90 standard ensuring a non penetrating continuous
film on the concrete surface covering an area of 4.5 to 5 sqm per ltr of curing
compound and shall be applied with a distance of 45 cms after 5 hours of
concreting to get the best results. This item shall be adopted wherever there
is scarcity of water and with prior approval of Superintending Engineer.
38.13 Polymer based : Providing & applying high efficiency polymer based curing L 240
compound membrane / layer applied in the form of spray over the roof
surface. The material consists of self curing compound membrane satisfying
greater curing efficiency when tested to BS 7542-1992 standard ensuring a
non penetrating continuous film on the concrete surface, covering an area of
3.5 to 5 sqm per liter of curing compound and shall be applied with a
distance of 45 cms after 5 hours of concreting to get the best results. The
above items shall be adopted wherever there is scarcity of water and with
prior approval of Superintending Engineer.
• Comes in convenient ready to use packing of 50 kg net HDPE bags with inside
LDPE liner
• Preparation prior to repair is minimal for optimum results, remove standing
water/loose debris/dust with a brush from the pothole.
• Pour Bituminous Cold Mix directly from the bag into the pothole and overfill
by 10mm
38.15.1 Pulverising the local soil in place, spreading with rotavator duly adding the
specified quantity of inorganic Compound RBI Grade 81 as approved by CRRI,
mixing thoroughly, sprinkling desired quantity of water, grading with motor
grader and compacting with the road roller at OMC to the desired density for
improving the subgrade & shoulders. (The laboratory CBR of the compacted
soil shall not be less than 10)
38.15.1.1 For soils having WL between 35 & 50, with 1% of inorganic Compound like cum 792
RBI Grade 81 by weight of soil.
38.15.1.2 For soils having WL more than 50, with 2% of inorganic Compound like RBI cum 1,500.00
Grade 81 by weight of Soil.
38.15.2 RBI Grade - 81 (Gravel soil & Aggregate Mix Material)
Pulverising and mixing 80% Gravel Soil and 20% Aggregates (30mm
nominal size), spreading with rotavator duly adding the specified quantity of
inorganic Compound RBI GRADE-81 as specified by IRC : 37-2012, mixing
thoroughly, sprinkling desired quantity of water, grading with motor grader
and compacting with vibratory roller at OMC to the desired density for
preparing the Base / Sub Base Layer (The Laboratory CBR of te gravel soil
shall not be less that 9%) including cost of all materials, labour, HOM of
Machineries complete as per specification.
38.15.2.1 With 2% inorganic Compound like RBI GRADE 81 by weight of soil & cum 1,745.00
Aggregate Mix Material :
38.15.2.2 With 3% inorganic Compound like RBI GRADE 81 by weight of soil & cum 2,455.00
Aggregate Mix Material :
38.15.2.3 With 4% inorganic Compound like RBI GRADE 81 by weight of soil & cum 3,165.00
Aggregate Mix Material :
38.15.2.4 With 5% inorganic Compound like RBI GRADE 81 by weight of soil & cum 3,873.00
Aggregate Mix Material :
38.15.3 RBI Grade - 81 (Coarse Aggregate & Fine Aggregate Mix Material)
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with
rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC : 37-2012, mixing thoroughly, sprinkling
desired quantity of water, grading with motor grader and compacting with
vibratory roller at OMC to the desired density for preparing the Base / Sub
Base Layer Layer including cost of materials, labour, HOM of Machineries
complete as per specification.
38.15.3.1 With 2% inorganic Compound like RBI GRADE 81 by weight of Coarse & Fine cum 2,563.00
Aggregate Mix Material :
38.15.3.2 With 3% inorganic Compound like RBI GRADE 81 by weight Coarse & Fine cum 3,523.00
Aggregate Mix Material :
38.15.3.3 With 4% inorganic Compound like RBI GRADE 81 by weight Coarse & Fine cum 4,469.00
Aggregate Mix Material :
38.15.4.1 With 2% inorganic Compound like RBI GRADE 81 by weight of Milled cum 2,677.00
Material :
38.15.4.2 With 3% inorganic Compound like RBI GRADE 81 by weight of Milled cum 3,622.00
Material :
38.15.4.3 With 4% inorganic Compound like RBI GRADE 81 by weight of Milled cum 4,568.00
Material :
38.15.4.4 With 5% inorganic Compound like RBI GRADE 81 by weight of Milled cum 5,514.00
Material :
38.16 Cutting the pothole to regular shape, trimming to provide firm vertical faces, cum 2,780.00
removing all loose materials, cleaning of surface, filling with a mix of
aggregates (40mm downside) & local soil (expect BC Soil) in 1:1 proportion
duly adding 2% of inorganic compound RBI Grade 81, mixing thoroughly,
compacting & finishing etc., complete in WBM layers for Pothole/Patch
repaires.
1) Materials
Soil of Gravel
Stabilizer agent, RBI Grade 81
Should be kept under cover and protected from moisture from the time of
purchase to the time of use. If material has been left exposed to
environmental elements, consult a RBI Grade 81 representative.
It is preferable to stabilize a soil with a continuously smooth gradation curve
from the maximum particle size to the smallest particle size with no excess or
lack in certain particles. This will ensure better interlocking capabilities of
the soil particles resulting in increased density and strength of the soil. It is
recommended that the soil material have sufficient fine material (< 2.00
mm) to effectively stabilize the material with RBI Grade 81.
2) Water
Water used should be free from harmful substances that may affect the
setting and hardening process of the stabilizer. Water that is thought to
ensuring adverse reactions should be tested for compatibility with RBI Grade
81.
3. Construction procedures
The stabilization of soil requires the careful programming of several
operations:
a. Pulverization, which may require initial scarifying
b. Addition of stabilizer
c. Thorough mixing of soil, stabilizer and added water
Rate
Sl. No. Description Unit
Rs. Ps.
d. Laying, spreading and compating
e. Curing - (minimum of 7 days curing is necessary)
Thus efficient planning of the side operations is necessary to minimize the
time between mixing and compacting. The periods of working should also be
consistent with the climatic conditions and the capability of the construction
equipment or plant, to keep to a minimum, if any changes in moisture
content and delays before compaction. Therefore moisture control has to be
considered throughout the stabilization process. A good indication of the
moisture content is to be found in the wheel tracks on the uncompacted
mixture. If too dry for satisfactory compaction, the material in the tracks
would crumble and crack; if too wet it would be easily moulded, deforming
plastically. Close to the optimum moisture content the wheel tracks would
have a dense, stiff surface. It is recommeded that 8-12 tons smooth-wheeled
rollers or 6-10 tons vibrating rollers be used for the compaction effort.
During shaping of the road before initial compaction it is essential to build in
a camber to prevent rainwater ponding on the road surface and the
construction of side drains by shaping with a grader. The road should
therefore have adequate cross-falls across the shoulders to the side drains to
allow for easy run-off of the surface water into the adjacent side drains. See
figures 1(a) and (b).
Road levels shall be implemented to control (1) the shape of the road and (2)
the specified stabilized layer height. To minimize surface irregularities it is
recommeded that the levels be set up at intervals of 10m or 20m apart.
The material to be stabilized should be placed, or in the case of an existing
pavement layer, scarified to the full depth specified, broken down, watered if
necessary and mixed to achieve a homogenous layer. Any oversize material
should be removed. or broken down to-53mm on the road by means of a grid
roller as the occurence of large stones will influence (1) the quality of the
finish and (2) the depth control due to the “pulling out” of the oversize rocks.
Ensure that the moisture content in the mixture is not below the OMC or
more than 2% above the OMC and less than the quantity that causes the road
bed to become unstable during compaction and finishing. If any portion of
the work becomes too wet after the stabilising agent has been added and
before the mixture has been compacted, as during rain or downpour the
application shall be rejected. These portion should be allowed to dry out to
the required moisture content and then be scarified, re-stabilised, re
compacted and finish the layer.
Rate
Sl. No. Description Unit
Rs. Ps.
Rate
Sl. No. Description Unit
Rs. Ps.
Ref : IRC SP 20 : 2002 : RURAL ROADS manual and morth specifications for
road and bridge works (4th revision)
Standards
38.19 Dry Lean Concrete (DLC) for propfile correction of existing bituminous
road surface before carrying out White Topping
Rate
Sl. No. Description Unit
Rs. Ps.
Dry Lean Concrete (DLC) M-5 for Profile correction of existing bituminous cum 3,438.00
road surface before carrying out White Topping Construction of dry lean
cement concrete sub base layer over existing scarified (to the depth of 25 mm
with miller machine includes mobilization, diesel and operating cost,
includes cleaning by air blower/sand blassting/brooming etc.) bituminous
road surface with coarse and fine aggregate conforming to IS 383, the size of
coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed
15:1, aggregate gradation after blending to be as per Table 600-1, Cement
content not less than 160kg/cum, optimum moisture content to be
determined during trail length construction, concrete strength not to be less
than 10 Mpa at 7 days, mixed in ready mix concrete plant or a batching plant
(to ensure consistency) transported to site, laid to the depth of 40 mm, 50
mm with a fixed form paver with electric sensor, having gang mounted
vibrators equally spaced with variable rpm and atleast three integral steel
tubes with 8-10 tonnes vibratory rollers for screeding, levelling, compaction,
finishing and curing, includes lifting/shifting charges of paver, as per
specifications complete, (cement 160kgs. coarse aggregate=0.86 cum, Fine
aggregate=0.58 cum)
38.20.1 -Do-with M-20 Concrete (Cement-300 kgs, coarse aggregate-0.64 cum, fine cum 4,298.00
aggregate-0.43 cum Water Cement ratio - 0.55)
38.20.2 -Do- with M-30 concrete (Cement - 360 kgs, coarse aggregate-0.69 cum, fine cum 4,890.00
aggregate - 0.46 cum water cement ratio - 0.45)
38.21 Providing groove cutting for width of 4mm - 6mm and 1/3rd depth of PQC m 100
Whitetopping within 8-10 hrs of placing/finishing of PQC including cost of
cutting machine, generators, HOM of machinery, blades, coolant or
equivalent cleaning of groove and providing sand and hot bituminous or
equivalent approved sealant filling etc., including cost of conveyance of all
materials, labour, lead and lift charges and all other incidental charges as
per drawing and as per specifications.
Rate
Sl. No. Description Unit
Rs. Ps.
Cement Concrete White Topping/Concrete Overlay as per IRC:SP:76-
2008
White topping is defined as a PCC (Portaland Cement Concrete) Overlay
constructed on the top of an existing bituminous pavement. Thus, it is a
rehabilitation or structuaral strengthening alternative on bituminous
pavement. Rutting of pavement is a real problem in a country like India, with
heavy truck loads, operating under frequent start/stop conditions, it is
commonly applied where rutting of bituminous pavements is a recurring
problem, particularly in case of city roads. Concrete over lays offers the
potential for extended service life, increased structural capacity, reduced
maintenance requirements and lower life-cycle costs when compared with
bituminous overlay alternative.
ii) Thin White topping (TWT) - which has PCC overlay between 100-200mm. It
is designed either consideration bond between overlay & underlying
bituminous layer or without consideration of bond. High strength concrete
(M-40 or higher) is normally used to take care of flexure requirement. Joints
are at shorter spacing of 0.6 to 1.25 m.
iii) Ultra - Thin White topping (UTWT) - which has PCC overlay of less than 100
mm. Bonding between overlay & underlying bituminous layer is mandatory.
To ensure this, the existing layer of bitumen is either milled (to a depth of 25
mm) or surface scrapped (with a non-impact scrapper) or gently chiselled.
Joints are provided at a spacing of 0.6 to 1.25 m.
Surface preparation
In case of TWT, bond between PCC overlay & existing bituminous pavement is
atleast partly desirable; in case of UTWT, effective bond is essential. To
ensure this any of the following method can be adopted.
Milling the existing bituminous surface to obtain a uniform surface. Milling
can be used to remove surface distortion like cracks in the top portion and
adjust cross slopes. Thickness of milling usually is in the range of 25 to 50
mm.
38.22 Use of GEO Textiles / GEO fabrics in road pavements and sub-surface
drainage works.
Providing and Inserting Prefabricated Vertical Drain, core with synthetic m 90
material and wrapped with Non-woven geotextile 120GSM in very soft clay
for quick consolidation.
Ref : IRC SP 59 : GUIDELINES FOR USE OF GEO TEXTILES IN road pavement
sand associated works - 2002.
Technical Data :
-do- with 100mm width thickness = 4mm, mass per linear meter 90g/m, with
tense strength = 2.0 KN
-d0- with 100mm width, thickness = 5.2 mm, mass per linear meter 110g/m,
with tensile strength = 2.4 KN
Application Methodology :
Vertical drains may be installed employing either vibratory or static
methods, In either case, the drain is enclosed in a tubular steel mandrel of
small steel anchor plate is attached to the drain at the bottom of the
mandrel. The mandrel is then driven in to the soil either with a static or
vibratory rig. When the design depth is reached, the mandrel is extracted.
The anchor plate retains the drain in the soil. When the mandrel is fully
extracted the drain is cut off a new anchor plate is installed and the process
begins again. These are used in Land reclamation projects, Construction of
highways, railways, airfields and dykes, Ports and harbor construction,
Development of Industrial sites, Mitigation of liquefaction, etc.,
38.23 Providing and Laying Needle punched and mechanically bonded Non-woven
Geotextile Indigenously manufactured from high quality synthetic fibre on
the prepared subgrade for separator cum filtration cum drainage
application with necessary overlaps as per drawing.
Application Methodology :
These contribute to road structure strength by protecting separation
between the base coarse aggregate and underlaying, weaker soils,
maintaining the structural integrity of the structure and avoiding the
intermixing of the different layers. It also acts as filter around aggregate
drains, it also allows water to flow into the drainage system while
minimizing the passage of fine soil particle that could diminish drainage
capacity. These used in application like Retaining Wall and Steep sided
embankments, Embankment on soft ground, Shallow foundations, Railway
tracks, confinement ponds, reservoirs and canals.
38.24 Providing and laying rope Gabions, indigenously manufactured from high
strength rope for slope protection and erosion control for river bank and sea-
shope protection. Exclusive of providing & filling stones.
38.24.1 -do- copper and synthetic rope gabion of size 1mx1mx1m, aperture 100mm x Box 1,300.00
100mm
38.24.2 -do- copper and sythetic rope gabion of size 1m x 1m x 2m, aperture 100 mm Box 2,400.00
x 100 mm
38.24.3 -do- copper and synthectic rope gabion of size 1m x 1m x 3m, aperture Box 3,600.00
100mm x 100 mm.
Technical Data :
do- size 1M x 1M x 1M, aperture 150mm x 150mm, Tensile strength 9500
kg/m, Punching shear strength 5200 kg
do- size 1M x 1M x 2M, aperture 100mm x 100mm, Tensile strength 14000
kg/m, Punching shear strength 6200kg
Application Methodology :
Copper and polymer Gabions are rectangular or cylindrical baskets
fabricated from polymer meshes and usually filled with stone and used for
structural purposes such as retaining walls, revetments, slope protection,
and similar applications. These are fabricated from ropes of suitable
diameter into a box like form with required size and apertures. These are
used in application like River bank protection, revetment, toe-walls, aprons,
groynes, spurs, channel linings, sea shore protection, seawalls, Anti-erosion
structures, etc.,
Application Methodology :
Biaxial geogrids are designed for applications where strength requirements
is in both directions. They are used in reinforcement of granular roadbase
and subbase, area stabilization, trackbed stabilization, road transfer
platforms etc.,
Rate
Sl. No. Description Unit
Rs. Ps.
38.26 Providing and Synthetic Uniaxial Geogrid, indigenously manufactured from
selected high tenacity synthetic yarn with high molecular weight (> 25000
g/mol), and low carboxyl end group (<30mmol/Kg) for reinforced soil wall
and slope application with granular fill as per design prepared by technology
provider of reinforced earth wall and slope.
Application Methodology :
Uniaxial geogrids are available in a range of strength and are suitable for
applications, which require strength in one direction, these are used in
reinforced soil walls, steep slopes and basal reinforcement of embankments,
veneer reinforcement, etc.,
Application Methodology :
Paving fabric is a strong layer of fabric is applied under asphalt to minimize
surface water infiltration and prevent existing cracks in the road from
surfacing to enhance the performance of pavement. The Barrier function
referes to the prevention of fluid movement across the plane of the geotextile.
A nonwoven geotextile provides a barrier function when saturated with an
impermeable material, like bitumen. It Retards the propogation of cracks,
Reduced the required design overlay thickness, Extends the life of the overlay
and the pavement section, These can be used as asphalt over lay on flexible
pavment and rigid pavement - a layer of DBM/BC should be provided on
rigid pavement before laying the paving fabric.
Application Methodology :
Metal Gabion is comprised double twisted hexagonally woven steel wire
mesh with zinc galvanized and PVC coated compartmented baskets with a
rectangular box shape. The compartments are of equal dimension and are
formed by internal diaphragms. The compartments is filled with natural
stone at the site of use, to form flexible, permeable, monolithic structures for
earth retension and the diapharagms assume minimum stone migration
within the basket. Thus providing even distribution of the stone even in
abnormal conditions, and adding strength to the container to help retain its
rectangular shape during the filling operation, depending on the application
and requirement, these gabions can be manufactured in different size i.e.,
length and width with diaphragm mat every 1.0 m length. These are used in
application like Earth control and soil conservation, Retaining
structures/walls, Rock wall protection netting, Protection of highways,
Barriers at the river, Bridges and culvert protection, Marine and sea wall
protection, Lining of steep slopes or slopes protection, Revetments for lakes
and sea shores, Lining of canals and dams, etc.,
Standards
1) Compressive strength for 28 days 78 N/sqmm
2) Flowable (Water powder ratio 0.18)
3) Pourable (Water power ratio 0.165)
4) Tensile strength for 28 days 3.5 N/sqm
5) Flexual strength for 28 days 10 N/sqmm
6) Unrestrained expansion - 2 to 4% in the plastic state
Methodology :
Non shrink free flow grout shall be added to the water in the ratio of 25 Kg :
4.125 ltrs of water for pourable condition and for flowable condition 4.5 ltrs
by using heavy duty slow speed grill (400 to 500 RPM) fitted with the
suitable peddle for 5 minutes. To get the best result the mixed grout should
be placed and used in 20 minutes after the mixture.
2) Surface Preparation :
Use wire brush & blower
Drill Hole Sixe 22mm, Use a template to get the spacing correct.
Rate
Sl. No. Description Unit
Rs. Ps.
3) Application
The epoxy should be immediately used after mixing.
Apply approximately 100gms of epoxy on the prepared surface & the RPM
with shanks.
Place the RPM with shank on the surface with hole & tap gently with a
wooden mallet.
3 The product should accompany Material Safety Data Sheet meeting OSHA
Standards & Product Data Sheet.
5 The work to be started after formal approval of test patch executed at the
site by Engineer-in-charge.
The above conditions are very vital since any damage that occurs on stone is
irreversible & will end up with damaged surface which is irreparable. Hence,
to protect what we can call assets of our heritage and culture for decades,
these kind of stringent measures to be considered to evaluate & see whether
a particular product or a contracting company deserves & qualifies to take
up such restoration cleaning project.
Work procedure
Step No. 1: Surface preparation.
The Stone surface to be prepared by removing all loose particles & dust. The
surface to be made free from the above said contaminations by wire brushing
with non-metalic brushes, followed by dusting off with Electric blower after
the installation of modular steel scaffolding.
Guarantee :
Rate
Sl. No. Description Unit
Rs. Ps.
Should assure that treatment will never give rise to formation of yellow
stains & neither erodes stone or pointing for life time which is normal with
either acid washing or using unproven and un-stabilised inferior acid based
stone cleaning formaulations. The treatment should also not give rise to dust
retentive surface which happens due to surface becoming rough beacuse of
erosion of a layer from the original surface after cleaning which denotes the
initiation of surface deterioration & leading to stone becoming dirty, dingly
& disclosed soon.
38.34.1 Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x Sqm 5,619.00
50 have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for
horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS
flat.
38.35.1 i) Center Shutter Fixed : Center shutter frame made of section with size Sqm 6,219.00
36mm x 58mm should be fitted with 5mm thick plain float glass of reputed
make, EPDM gasket all around the glass and fixed to the Outer Frame with
the supporting section of size 29mm x 20mm of 0.58 mm thick fixed
horizontally on top and bottom of the shutter frame.
38.35.2 ii) Center Shutter Sliding : Center shutter frame made of section of size Sqm 6,297.00
36mm x 58mm should be fitted with 5mm thick plain float glass of reputed
make. The supporting guide section of size 15mm x 19mm of 0.58mm thick
fixed horizontally at top guide tracks made of sections size 24mm x 20mm of
0.58mm thick and 29mm x 20mm of 0.58mm thick.
Rate
Sl. No. Description Unit
Rs. Ps.
38.36 Steel Windows with grill and flymesh for residential buildings
Providing and fixing of windows made of pre-painted steel (base steelas per
IS 513 of 0.58mm tick galvanized as per IS 277 with zinc of 120 GSM). Primer
coated with epoxy primer of 5-7 microns thick, finishpainted with a polyester
paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd
backer. Section for outer frame should be of 72x55mm, centre mullion should
be of 72x50mm, section of the fixed glass beading should be of 12x12mm. and
section of the shutter should be of 48x28mm, Outer frame and mullion
sections to have rebate forglazed shutters, fly mesh and 20mm provision for
guard bars/grill flymesh shutters section should be of 20x40mm. The sections
are to be cut to length mitre joined with corner bracket. Centre mullion is to
be be fixed with mullion cap. Handle latch 2 Nos of heavy duty stainless
steelpivot hinges shall be provided for shutter. The window should be led
with 50mm thick plain float glass and S.S. Mesh for fly mesh shutter (304
grade) Rubber gaskets are to be provided all around the glass. The above
frames should be fixed to the concrete/masonry wall by means of self-
expanding screws, including 10mm square guard barswith 6” (152.4mm)
pitch complete for finished item of work.
38.36.1 Double shutter window with vertical mullion 3’0x4’0” (914.4mmx1219.2mm) Sqm 7,076.00
outer frame section size of 72x50mm shutter frame section size of 48x25mm
mullion section size of 72x50mm.
38.36.2 Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x Sqm 6,784.00
1219.2mm) Outer frame section size of 75x50mm, Shutter frame section size
of 48x25mm mullion section size of 72x50mm, Fixed beading section size of
12 x 12mm.
38.37.1 Double shutter window with vertical mullion 3’0”x4’0” (914.4mm Sqm 4,046.00
1219.2mm) outer frame section size of 48x50mm shutter frame section size
of 48x25mm mullion section size of 48x50mm.
38.37.2 Center fixed both side openable shutter window 6’0”4’0” (1828.8mm x Sqm 4,493.00
1219.2mm). Outer frame section size of 48x50mm shutter frame section size
of 48x25mm mullion section size of 48x50mm, Fixed beading section size of
12x12mm.
Rate
Sl. No. Description Unit
Rs. Ps.
38.38.3 Ventilators : Top hung 4’-0” x 3’-0” (1219.2x914.4mm) outer frame section Sqm 4,000.00
size of 46x52mm shutter frame section size of 46x46mm mullion section size
of 46x70mm.
38.38.4 Ventilators : Fixed lovers 4’-0” x 3’-0” (1219.2x914.4mm) (Box section) outer Sqm 3,850.00
frame section size of 33x57mm mullion section.
C) 2 lane using SDBC mix material.
38.39 Road Humps/Speed breakers for control of vehicular speeds on roads
Providing road humps for the entire formation width, using bituminous
premix materials and heavy duty cobble stones 60mm thick, having road
hump dimensions of 1.00 mtr. (width) x 0.15mtr. (height) rectangular
sections and ramp on either side of road hump of 0.85mtr. (wide), including
providing WBM (2 layers) for shoulder portion 1.7mts in length on either
side, completing with road marking paint with applied thermoplastic
compound with reflecting glass beeds on bituminous surface and providing 2
No.s retro reflective traffic signs as per IRC SP 67-2010 (for details refer IRC
99-1988).
38.39.1 For single lane for formation width of 7.50mtrs. and using SDBC mix Unit 29,195.00
material.
38.39.2 Intermediate lane for formation width of 9.00 mtrs using SDBC mix material. Unit 35,855.00
38.39.3 lane for formation width of 12mtrs, using SDBC mix material. Unit 46,080.00
38.40 Providing road humps for entire formation width, using bituminous premix
materials and heavy duty cobble stones 60mm thick, having road hump
dimensions of 1.00mtr. (width) x 0.15mtr. (height) rectangular sections and
ramp on either side of road hump of 0.85mtr. (wide), including providing
WBM (2 layers) for shoulder portion 1.7mtrs in length on either side,
completing with road marking paint with applied thermoplastic compound
with reflecting glass beeds on bituminous surface and providing 2 Nos. retro
reflective traffic signs as per IRC SP 67-2010 (for details refer IRC 99-1988).
Rate
Sl. No. Description Unit
Rs. Ps.
38.40.1 For single lane for formation width of 7.50mtrs. and using BC mix material. Unit 33,784.00
38.40.2 Intermediate lane for formation width of 9.00mtrs using BC mix material. Unit 38,167.00
38.40.3 2 lane for formation width of 12mtrs. using BC mix material. Unit 49,157.00
38.41 Providing, laying, rumble strips, 250mm wide and 25mm height in
rectangular shape at 1.00mtr. center to center for entire formation width of
road using pre mix bituminous material, including providng WBM (2 layers)
for shoulder portions, applying tack coat, providing 2 Nos. retro reflective
traffic signs as per IRC SP-67-2010 (for details IRC 99-1988)
38.41.1 For 3 Nos.-including WBM layers for length of 2mtrs. on either side of Unit 16,728.00
carriage way in shoulder portion.
38.41.2 Single lane using SDBC mix material. Unit 16,417.00
38.41.3 Intermediate lane using SDBC mix material. Unit 20,624.00
38.41.4 2 lane using SDBC mix material.
38.41.2 For 5 Nos.-including WBM layers for length of mtrs. on either side of the
carriage way in shoulder portion.
38.41.2.1 Single lane using SDBC mix material. Unit 23,708.00
38.41.2.2 Intermediate lane using SDBC mix material. Unit 23,181.00
38.41.2.3 2 lane using SDBC mix material. Unit 30,148.00
38.41.3 For 10 Nos.- including WBM layers for length of 9mtrs. on either side of
carriage way in shoulder portion.
38.41.3.1 Single lane using SDBC mix material. Unit 41,083.00
38.41.3.2 Intermediate lane using SDBC mix material. Unit 40,024.00
38.41.3.3 2 lane using SDBC mix material. Unit 53,958.00
38.41.4 For 15 Nos. - including WBM layers for length of 15 mtrs. on either side of
carriage way in shoulder portion.
38.41.4.1 Single lane using SDBC mix material Unit 58,440.00
38.41.4.2 Intermediate lane using SDBC mix material. Unit 56,823.00
38.41.4.3 2 lane using SDBC mix material. Unit 77,723.00
38.42 Providing and laying Geocells ultrasonically weided 1.30mm thick, HDPE
strips, expandable to form GEOCELLS of honeycomb structure, anchoring to
metal pegs at each and cell to be laid on prepared surface.
38.42.1 -do- 100mm height Sqm 370
38.42.2 -do- 150mm height Sqm 480
38.43 Providing, fabricating and fixing profiled poly erethane insulated roof of Sqm 2,250.00
1,06m width and 7,60m length sheets roof having external sheet of 0.5mm
steel with powder coated finish, bottom sheet of 0.4mm steel with powder
coated finish. The roofing system shall have water proof over lapping
arrangement at the inter section of two sheets the fasting shall be of self
tapping screws dia 6.3mm or required length with PVC head along with
washer pre-painted aluminium cap unit with build in seal arrangements. The
entire roof shall be firmly fasteed to the existing frame.
38.44.2 Providing & fixing of glazed Openable Window made out of multi Sqm 7,000.00
Chambered uPVC sections with TPV gaskets having Isolated drainage and
reinforced with Galvanized iron profiles throughout the window. The outer
frame having a overall size of 60x45 mm with reinforcement of 1 mm
thickness, mullion with overall size of 75x60 mm with reinforcement of
1.5mm thickness. Glazing bead for fixing of glass shall be of size 34x20mm
and coextructed with gasket. Windows shall be provided with 5mm plain
float glass, standard hardware & single point locking system of flush lock.
Wall thickness of frame & sash shall be 2-2.2 mm.
38.44.3 Providing & of Fixed Louvered Ventilator made of multi chambered uPVC Sqm 6,200.00
sections with TPv gaskets having isolated drainage and reinforced with
Galvanized iron profiles through out the windows. The outer frame having a
overall size of 60x55mm with reinforcement of 1 mm thickness and Mullion
with overall size of 74x60mm with reinforcement of 1 mm thickness.
Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware,
Wall thickness of frame Mullion shall be 2-2.2 mm.
38.44.4 Providing & fixing of Top hung Ventilator With Exhaust Fan Provision made Sqm 7,000.00
out of multi chambered uPVC sections with gaskets having isolated drainage
and reinforced with Galvanized iron profiles through out the Window. The
outer frame having a oveall size of 60x55 mm with reinforcement of 1 mm
thickness, Mullion with overall size of 74x60mm with reinforcement of 1 mm
thickness and Sash with overall size of 75x60mm with reinforcement of
1.5mm thickness. Glazing bead for fixing of glass shall be of size 34x20 mm
coextruded with gasket. Ventilator shall be provided with 4.5 mm Pin Head
glass, standard hardware, single point locking and friction stays. Wall
thickness of frame, Mullion & sash shall be 2-2.2 mm.
38.44.5 Providing & fixing of glazed 3 Track - 2 Panel Sliding Window With Mesh Sqm 7,500.00
made out of multi chambered uPVC sections with TPv gaskets having isolated
drainage and reinforced with GI throughot the window. The sliding outer
frame having a overall size of 108x45 mm with reinforcement of 1 mm
thickness, sash with overall size of 39x58 mm with reinforcement of 1.5 mm
thickness, mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of GI.
Glazing bead for fixing of glass shall be of size 20x18mm and coextruded with
gasket. Fiber Glass mesh shall be provided in mesh shutter. Windows shall be
provided with 5 mm plain float glass, standard hardware and single point
locking system of flush lock. Wall thickness of frame, mullion & sash shall be
2-2.2 mm.
Rate
Sl. No. Description Unit
Rs. Ps.
38.44.6 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door made out of multi Sqm 6,000.00
chambered uPVC sections with TPV gaskets having isolated drainage and
reinforced with Galvanized iron profiles through out the window. The Sliding
outer frame having a overall size of 60x45 mm with reinforcement of 1 mm
thickness, super sas with overal size of 39x75 mm with reinforcement of
1.5mm thickness. Glazing bead for fixing of glass shall be of size 20x18 mm
and coestruded with gasket. Fiber Glass mesh shall be provided in mesh
shutter. Window/Door shall be provided with 6 mm plain float glass,
standard hardware & multi point locking system of patio espagnolette. Wall
thickness of frame, mullion & sash shall be 2-2.2 mm.
38.44.7 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door with Mesh... made Sqm 7,000.00
out of multi chambered uPVC sections with TPV gaskets having isolated
drainage and reinforced with Galvanized Iron profiles through out the
window. The sliding outer frame having a overall size of 108x45 of 39x75
mm with reinforcement of 1 mm thickness, super sash with overall size of
39x75 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size
30x48.5 mm reinforced with 1.5 mm of GI. Glazing bead for Glass mesh shall
be provided in mesh shutter, Window/Door shall be provided with 6 mm
plain float glass, standard hardware & multi point locking system of Patio
espagnolette. Wall thickness of frame, mullion & sash shall be 2-2.2 mm.
38.45 Consultancy Services for Preparation of Land PlanSurvey for State Highways KM 36,000.00
and Major District Roads
The entire Land Survey Plan should be carried out using LiDAR Technology
only, Collection of all the relevant information for 50 Mtr on either side from
The entire Land Survey Plan should be carried out using LiDAR Technology
only, Collection of all the relevant information for 50 Mtr on either side from
centre of the road, Details of Structures (if any), Cross Drainage Structures,
Alboriculture counts and other Assets, which have been developed as a part
of the road furniture / development. Establishing the Primary Control Points
(Horizontal Control), using the DGPS at every 1000 meters and also at
important and salient locations, such as major inter sections, Village / Town
limits etc., The DGPS controls will be so established that it meets the mullion
criteria specified for carrying out the mapping activities on a scale of 1:5000
or 1:10000. (Inclusive of all taxes).
The following documents in both Hard and Soft Copy (where required)
should be furnished :
1
1:4000 Drawings which includes, Details of SH, shall cause to be marked on
the map, thereon, Highway boundaries and Buildings and Controll Lines and
other particulars. Such as RoW, Road Boundaries, DGPS Points, Existing
Inventories, Survey Numbers, Control Points, Alignment Details etc.,
2 All required data sheets
3 Point cloud Data of Area of Interes
4 Drawing File containing 3D information of required details
5 Images Captured along with Video files using LiDAR
6
Superimposed Alignment on the State Map supplied by the client, duly
indicating the Survey Numbers and other details such as encroachments.
7 RTC Copies collected from Revenue Authorities and RTC Transferred
accordingly.
8
Khatha Certificate from respective authorities for the entire strength of land
registered in the name of the Executive Engineer of the respective Divisions.
9 List of land encroached along with extent of land and name of the
encroacher with all details as per standard format.
10 All documents shall be submitted in colour and with proper binding along
with soft copies - 5 Nos. each.
11
The formats for Data Collection and reports, layerisation of drawings
indicating the factors in standard prescribe colour and symbols, shall be
approved by PRAMC (Note: The soft copies to be made compatible to be
uploaded in the PWD web site - www.kpwd.gov.in)
12 In areas, where cities/urban development is encountered, mapping shall be
carried out on 1:2000 Scale, Whereas, in cross country it can be on 1:4000
scale.”
Rate
Sl. No. Description Unit
Rs. Ps.
Rate
Sl. No. Description Unit
Rs. Ps.
Furnishing Work
39.2 Providing and fixing acoustic Veneer paneling, over the 50mm x 35mm sal Sqm 5,023.00
wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled
with 50mm thick 32kg density glass wool and top covered out of 4mm thick
approved quality Veneer, fixed over 19mm thick ply of approved brand
termite and water resistance, finished with melamine polish, complete
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment complete as per specification.
39.3 Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using Sqm 11,587.00
19mm thick vinyl bonded water proof block board, shutters all-round ward
robe, lockable drawers with sliding channels, cupboard drapery hangers,
curtain rods with end brackets, openable shutters with 19mm x 6mm thick
plain teak wood beading, lipping 1.5mm thick commercial ply vertical
support finished in approved 1.5mm lamination sheet of approved colour,
shade and quality on all exposed surfaces. Inner surface painted with 2 coats
of white synthetic enamel paint over 2 coats of Patti, one coat of wood
primer, including cost of brass fittings, parlimentary hinges, C handles, tower
bolts, magnetic catches, approved brand lock, adhesives, synthetic resins,
nails, screws etc., complete including cost of all materials, labour charges,
complete as per specification.
39.4 Providing and fixing storage unit of 0.75m width made out of 19mm thick Sqm 13,863.00
commercial ply vertical support finished in approved 1.5mm laminate with
12mm thick ply package internally finished with enamel paint of approved
colour and shade shelves shall be formed out of 19mm ply finished with
enamel paint of approved shade and colour and 19mm thick shutters formed
out of 19mm thick ply finished with 1.5mm thick laminate of approved shade
and colour etc., complete the rate includes cost of all materials, labour
charges, complete as per specification.
39.5 Providing and fixing Single shutter glass door of 12mm thick plain Sqm 8,497.00
toughened glass (Saint Gobain, Modi float). The door is fixed by using any
approved make hardware fitting like patch fitting, pivot, floor machine,
locking arrangements and suitable SS door rails with floral glass etching for
1/3 portion of door area etc complete. The rate includes cost of materials,
labour, hire of tools & machineries, and as per specification.
39.6 Providing and fixing Double shutter glass door of 12mm thick plain Sqm 8,043.00
toughened glass of approved make (Saint Gobain, Modi float). The door is
fixed by using any approved make hardware fitting like patch fitting, pivot,
floor machine, locking arrangements and suitable SS door rails with floral
glass etching for 1/3 portion of door area etc complete. The rate includes
cost of materials, labour, hire of tools & machineries, and as per specification.
39.7 Providing and fixing Single shutter glass door of 12mm thick frosted Sqm 7,471.00
toughened glass of approved make (Saint Gobain, Modi float). The door is
fixed by using any approved make hardware fitting like patch fitting, pivot,
floor machine, locking arrangements and suitable SS door rails with floral
glass etching for 1/3 portion of door area etc complete. The rate includes
cost of materials, labour, hire of tools & machineries, and as per specification.
Rate
Sl. No. Description Unit
Rs. Ps.
39.8 Providing and fixing Double shutter glass door of 12mm thick frosted Sqm 7,096.00
toughened glass of approved make (Saint Gobain, Modi float). The door is
fixed by using any approved make hardware fitting like patch fitting, pivot,
floor machine, locking arrangements and suitable SS door rails with floral
glass etching for 1/3 portion of door area etc complete. The rate includes
cost of materials, labour, hire of tools & machineries, as per specifications.
39.9 Providing, fabricating and fixing partition frame work consisting of 50mm x Sqm 9,723.00
50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the
bottom and ceiling, the partition shall be skinned on both sides using 12mm
thick commercial plywood of approved brand termite and water resistance,
and top covered with 4mm thick approved quality veneer finished with
melamine polish, complete including cost and conveyance of all materials,
labour for all items of work, HOM of equipment as per specification.
39.10 Removing wall paneling / false ceiling / wooden partition / aluminium Sqm 60
partition, stacking it with all cost and conveyance labour for all items of
work, HOM of equipement etc., complete as per specification.
39.11 Providing and fixing 100mm wide venitian blinds of window fashion fabric of Sqm 950
Taiwan make, with 50mm thick powder coated channel with balance,
imported, acrylic self alingnable mechanism and equally placed spacers,
imported titing mechanism for easy titing operation, with nylon imported
thread and beadings, 100mm wide imported washable reusable fabric placed
with top hanger and bottom with 100mm long bottom plate connected to
nylon imported bottom link chain. The rate is inclusive of drilling holes for
fixing channels to the wall, fixing threads and beadings and link chains, hard
ware fixtures etc., complete as per drawing, specifications.
The main “T” consists of size : 24mm width x 38mm height, this main “T” is
been made of galvanized Iron sheet of 0.3mm thickm this are formed in the
shape of a main “T” Bar on a fully automatic advance computer machine, the
galvanized Iron sheet are later on capped with pre-coated aluminium
capping will have the colour, same as the panels colour or any other colour
of choice. The grade of Galvanized iron sheet in as per BIS and the grade of
aluminium chapping is (Al-Mn) 3003 of H-46 to 48. The cross “T” bars are of
1200mm in length and this “T” s are of size 24mmx38mm in height, another
“T” bar consist 600mm in length and this “T” bar are of size 24mm width x
38mm in height, this “T’ bar is fixed on to the main “T” of 24mmx38mm
height and cross tees of 24mmx38mm height forms a pattern of
600mmx600mm grid and further this grid work is supported by G.I. Rod of
4mm and height adjustable “J” bolts system. The “T” grid system consists of
special steel is as per BIS, and the thickness of the steel is 0.3mm thick, This
“T” frame work is capped with coil coated aluminium sheet and the grade of
the Aluminium sheet is (Al-Mn) 3003 of H-46 to H-48.
Mineral fiber ceiling panels are placed inside the grid work.
39.12.2 PVC laminated false ceiling
Supply & installation of PVC laminated false ceiling size of 600x600mmx9mm Sqm 2,710.00
as per the following specification :-
Panels are PVC laminated on the finish side and backed with aluminium foil
(behind). It shall be suspended with the frame work and accessories
completed from roof slabs, beams etc., by means of 4mm dia galvanized rods,
J bolt, Tee runner, Ultra look Tee Runner and edge trim etc.,
Installation :
The top portion of rod shall be rounded and shall be screwed to slab by
means of providing grip bolts 5mm long and other end shall be bolted by
means of providing 3/16’x1/2 machine screws and 3/16’ nut for leveling in
to the snap bar hanger 1.2 meter to 2.00 meter center to center. The distance
between two snap bars shall be 1200 mm centre to centre, The snap bar shall
be fixed into the snap bar. The pressure clip shall be provided along the
length of the tile filange to hold the panels in line and level at suitable
distance, as required. The edge profile shall be fixed at the perimeter of the
false ceiling area.
Panel details :-
The good quality fully finished ceilingt systems consists of aluminium powder
coated false ceiling panels comprising 595mmx595mmx35mm H. This panels
are tapered out on all four sides slopping towards inside and the size is
565mmx565mm. The panels are non combustible fire proof. This panels has
excellant Aesthetic look and the panels are made out of special imported
powder coated aluminium sheet of 0.8mm thick the sheets consists of
Aluminium alloy of AA 3003/1100. This special fully finish panels will have
solution one where the panels will go to drop down by 35 mm and solution
two where the panels will go by 35mm.
This panel also have above got perforation and the dia of the perforation is
2mm and the distance between one perforation to another perforation is
10.00mm centre to centre the perforation in the panels are in straight line.
Rate
Sl. No. Description Unit
Rs. Ps.
These panel are provide with sound absorption mat.
39.14.1 Sharing workstation 1A) Size : 1200 mmW x 600mm D x 1200 mm ht - No 22,000.00
(Sharing - Edgebinding table top) :
39.14.2 Sharing workstation 1A) Size : 1200 mmW x 540mm D x 1200 mm ht - No 23,000.00
(Sharing - Postformed table top) :
39.14.3 Non Sharing workstation 1C) Size : 1200 mmW x 600mm D x 1200 mm ht - No 23,000.00
(Non Sharing - Edgebinding table top) :
39.14.4 Non Sharing workstation 1D) Size : 1200 mmW x 540mm D x 1200 mm ht - No 26,000.00
(Non Sharing - Postformed table top) :
39.15 Straight workstation (Frame)
Providing and fixing Straight workstation (Frame) consisting of back to back
unit made out of 75 mm thick MS CRCA powder coated, tile based system for
main and return spine, Top tile finish 8 mm thick MDF covered with Fabric
of approved of approved colour and one writing board (600 mm w) and one
soft board (600 mmw) per workstation, Bottom tile finish 9 mm thick
Laminate tile of approved colour, Raceway-one middle raceway (600mmW)
below table top per workstation and continuous raceway at the skirting
level, Wire manager -ABS plastic grommet one number per table, Table top -
25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with
straightedge bound Hardware _MS powder coated corner bkt, cantilever bkt,
separator hook on bkt, L bkt and Table joint plate., as per specifications,
drawings and as directed by Engineer in charge Sharing workstation.
39.15.1 Sharing workstation 2A) Size : 1200 mmW x 600mm D x 1200 mm ht - No 13,500.00
(Sharing - Edgebinding table top) :
39.15.2 Sharing workstation 2B) Size : 1200 mmW x 540mm D x 1200 mm ht - No 14,500.00
(Sharing - Postformed table top) :
39.15.3 Non Sharing workstation 2C) Size : 1200 mmW x 600mm D x 1200 mm ht - No 13,000.00
(Non Sharing - Edgebinding table top) :
39.15.4 Non Sharing workstation 2D) Size : 1200 mmW x 540mm D x 1200 mm ht - No 14,250.00
(Non Sharing - Postformed table top) :
39.16 Cubical workstations
Providing and fixing Cubical workstations consisting of wings made out of 75
mm thick MS CRCA powder coated tile based system for main and return
spine, Top tile finish 8 mm thick MDF covered with fabric of approved colour
and one writing board (600 mm w) and one soft board (600 mmw) per
workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour,
Raceway-one middle raceway (600mmW) below table top per workstation
and continuous raceway at the skirting level, Wire manager -ABS plastic
grommet one number per table, Table top - 25 mm thick PLPB with straight
table top End Table 25 mm thick PLPB with straightedge bound Hardware
_MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt
and Table joint plate., as per specifications, drawings and as directed by
Engineer in charge.
39.16.1 X Type 4 wings 3A) Size : 1500 mmW x 1200mm x D x 1200 mm ht : Unit 60,000.00
39.16.2 X Type 4 wings 3B) Size : 1500 mmW x 1200mm x D x 1200 mm ht : Unit 80,000.00
39.16.3 T Type 2 wings 3C) Size : 1500 mmW x 1200mm x D x 1200 mm ht : Unit 38,000.00
39.16.4 T Type 2 wings 3D) Size : 1500 mmW x 1500mm x D x 1200 mm ht : Unit 48,000.00
39.16.5 C Type 2 wings 3C) Size : 1500 mmW x 1200mm x D x 1200 mm ht : Unit 44,000.00
39.16.6 C Type 2 wings 3D) Size : 1500 mmW x 1500mm x D x 1200 mm ht : Unit 55,000.00
39.16.7 L Type one wings 3C) Size : 1500 mmW x 1200mm x D x 1200 mm ht : Unit 25,000.00
39.16.8 L Type one wings 3D) Size : 1500 mmW x 1500mm x D x 1200 mm ht : Unit 32,000.00
39.17 Free standing Table for cabin - without frames
Rate
Sl. No. Description Unit
Rs. Ps.
Providing and fixing Free Standing Table for Cabin - without frames
consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge
bomded End table, 18 mm thick PLPB with edge bonded Modesty, Wire
manager - ABS plastic grommet one number per table table Hardware-
Minifix assembly and screw leg, as per specifications, drawings and as
directed by Engineer in charge.
39.17.1 Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgebinding table top) No 14,600.00
Side Table : 900 mm W x 450 mm D x 750 mm ht
39.17.2 Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgebinding table top) No 16,500.00
Side Table : 900 mm W x 450 mm D x 750 mm ht
39.18 Free Standing Table for cabin - without frames
Providing and fixing Free Standing Table for cabin - without frames
consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge
bonded End table, 18 mm thick PLPB with edge bonded Modesty, Wire
manager - ABS plastic grommet one number per table table Hardware-
Minifix assembly and screw leg, as per specifications, drawings and as
directed by Engineer in charge.
39.23.1 75mm thick frames tile based system (Frame with Tile) Sqm 5,380.00
39.23.2 75mm thick frames tile based system (Frame with Glass) Sqm 5,900.00
39.24 Storage Unit - wooden - one side laminate
Providing and fixing woode storage unit one side laminate with 18 mm
PLY/PLPB edge bound for body, 18mm PLY/PLPB with openable shutters
and individual locking system for shutter, 9 mm PLY with edge bound for
rear portion with Hafele fitting hingers, Hafele locks, Minifix assembly, screw
legs, Handles and tower bolt, complete as per specifications, drawings and as
directed by Engineer in charge.
40.48 Providing Carbon Composite Cylinder 2 Kg (For 9 Ltr, Water Mist Each 39,600.00
Extinguisher) without Gas Filling.
40.49 Providing Mild Steel Cylinder 6 Kg ( For 50 Ltr. Water Mist Extinguisher) Each 23,100.00
without Gas Filling.
Providing QRS 4 Kg - Direct Low Pressure System - Gross Weight 7 Kg, Empty Each 1,15,500.00
Weight 3 Kg, Can Height 413 MM, Diameter 140MM, Can construction : Deep
Drawn, valve Construction : Forging / Machining, External Construction :
Epoxy Powder Coating, Helium Leak Dection Tested, Sheet Metal Thickness :
1.60MM, 1 Year warranty, Valve, Nickel Plated, With Integrated Ball Valve,
Integrated position control for ball valve: open - close, Extinguishing Clean
Agent HCFC-123, Stored Pressure, Fitted with Pressure Gauge, Control Panel
having Maintoring LED’s for AC Power, System On, Discharged, Valve Closed,
Valve Open, Pressure Healthy, Strobe Red, Strobe Amber, OLED Graphic
Display 95x16, Battery Backp, 3 Outputs using Potential Free relay contact,
Audio Output using Piezo buzzer, 3 Meter Sensor Tue UV Resistance with
Pressrization of Tube Using Nitrogen Gas, End of Line Plug 1 Pc, End of Line
Adaptor 1 Pc, T Connection/Elbow/Straight Connection 1 Pc, Pressure
Switch M 10x1, Switchpoint 15 bar - 1 Pc, Tube Attachment 8 Pc.
40.85 Supplying, Installing testing & commissioning approved make Centrifugal No 1,70,000.00
pump end suction type coupled to Electric motor of suitable HP, fitted on a
commonbase frame and rated for Fireduty. The quated price shall also
include 2 Nos. Pressure guages fitted on suction & delivery sides of the pump.
The pumps shall run on 400/440V 3ph. 50 Hz electric supply. Duty of pumps :
1620 Lpm @ 70.0m Head. Control panel shall be as specified in item 87
Rate
Sl. No. Description Unit
Rs. Ps.
40.86 Supplying, Installing testing & commissioning electrically driven jockey No. 1,20,000.00
pump of capacity 180.0 Lmpm at 75.0m head with all the necessary
accessories viz. Pressure guages etc. Operating on 3Ph 50 Hz, 400/440 V AC
Supply including foundation bolt etc., complete. Control panel shall be as
specified in item No. 87
40.87 Supply installing, testing and commissioning COMMON control panel for fire Unit 2,10,000.00
fighting system consisting of electrical mortar driven 60 HP Main fire pump,
Jockey pump and 12.5 HP consisting of the following
Incoming :
1 No. Set of phase indicing lamps with SFU Rate 350A
1 No. Set of 400 Amps. TPNE Ai. Bus bars
1 No. 0-400 Amps. Ammeter, 1 No. 0-600V voltmeter with phase selector
switch, Isolating Switch 400 A
f) Spare 1 strand
Rate
Sl. No. Description Unit
Rs. Ps.
The cost of control panel shall also include necessary pressure switches with
necessary cabling & inter-locked with the panel to enable sequential
operation of Pumps, Including terrace mortar necessary earthing All the
components shall be housed in a common cubical. However, the feed cable
for diesel engine driven pump battery charger shall be taken separately.
40.88 Supplying Installing testing and commissioning electrically driven Terrance No. 90000.00
pump of capacity 900.0 Lpm at 35.0m Head with all the necessary
accessories viz. Pressure guages etc., operating on 3Ph 50Hz, 400/440V AC
supply including foundation, bolts etc., complete Controle panel shall be as
per specification 87
40.89 Excavation in all sorts of soil for laying pipes upto 100mm dia including cum 211.00
forming bottom surface to required level, refilling selected excavated earth
around the pipe in layers of 150mm thick, watering consolidating and
disposing off the surplus earath within the sties or as directed by the site
engineer etc., complete Depth upto 1.0m.
40.90 Supply installation, testing and commissioning of fire alarm Main panel with No 80000.00
15 zone indication alaram etc., as required.
40.91 Supplying Installing testing and commissioning approved make Centrifugal No 3,10,000.00
pump end suction type couple to Electric mortar of suitable HP, fitted on a
common base frame and rated for Fire duty. Including 2nos. Pressure guages
fitted on suction & delivery side of the pump. The pumps shall run on
400/440V, 3ph, 50Hz electric supply, Duty of pumps : 2850 Lpm @ 70.0m
Head. Control panel shall be per specification stated in item No.87. (Cost of
control pannel is not included)
40.92 Supplying, Installing, testing and commissioning of fire hydrant multi stage No. 5,50,000.00
pump capable of delivering 2850 Lpm @ 70.0m head coupled to water colled
diesel engine of adequiate HP. It shall be fitted with a radiator on a common
base from with complete ancilalary units such as colling system, non return
value, Y strains, fuel tank of adequate coapcity. Pressure guage, pressure
switch. Control panel shall be per specifications stated in item No.87. (Cost of
control pannel is not included)
40.93 Supplying, Installing, testing and commisioning electrically driven jockey No. 95000.00
pump of capacity 180.0m Lpm at 70.0m head with all the necessary
accessories viz. Pressure guages etc., operating on 3Ph 50Hz, 400/440 V AC
supply including foundation, bolts etc., complete control panel shall be per
specification stated in item No.87. (Cost of control pannel is not included)
40.94 Supplying, Installing, testing and commissioning approved make Centrifugal No. 3,10,000.00
pump end suction type couple to Electric motor of suitable Hp, fiited on a
common base frame and rated for Fire duty. The quoted price shall also
include 2 nos. Pressure guages fitted on suction and delivery side of the
pump. The pumps shall rum on 400/440V, 3ph, 35-Hz electric supply. Duty of
pumps : 2850 Lpm @ 90.0m Head. Control panel shall be per specification
stated in item No.87. (Cost of control pannel is not included)
40.95 Supplying Installing testing and commissioning COMMON Control panel for No. 2,50,000.00
fire fighting system consisting of electrical motor driven 60HP Main fire
pump, Diesel engine driven pump 60HP Sprinkler pump 50HP & Jockey pump
25 HP
Rate
Sl. No. Description Unit
Rs. Ps.
40.96 Providing coating and Wrapping of Buried G.I. pipes with 2 mm thick Rmt 340.00
pypkote Pipe Qtuy. Include in item No.1
a) 15mm Dia
40.97 Supplying, Installing, testing and commissioning approved make No. 2,50,000.00
Centrifuhgal pump end suction type couple to Electric motor of suitable Hp,
fitted on a common base frame and rated for Frie duty. The quoted price
shall also include 2 Nos. Pressure guages fitted on suction & delivery side of
the pump. The pumps shall run on 400/440v, 3h, 50 Hz electric supply, Duty
of pumps : 1620 Lpm @ 70.0m Head. Control panel shall be per specification
stated in item No.87. (Cost of control pannel is not included)
40.98 Supplying, Installing testing and commissioning of fire hydrant multi stage No. 3,50,000.00
pump capable of delivering 1620 Lpm @ 70.0m head coupled to water colled
diesel engineer of adequate. HP. It shall be fitted with a radiator on a
common base frame with complete ancilary units such as colling system, non
return vialve, Y strainer, fuel tank of adequante capacity, Pressure guage,
pressure switch etc., complete Control panel shall be per specification stated
in item No.87. (Cost of control panel is not included)
40.99 Supplying, Installing testing and commissioning electrically driven jockey No. 95000.00
pump of capacity 180.0 Lpm at 70.0m. Head with all the necessary
accessories viz., Pressure guages etc., operating on 3Ph 50Hz, 400/440V AC
Supply including foundation, bolts etc., complete, Controle panel shall be
specification stated in item No. 87. (Cost of control pannel is not included)
40.100 Supplying Installing, testing and commissioning COMMON control panel for No. 2,50,000.00
fire fighting system consisting of electrical motor driven 60HP Main fire
pump. Diesel engine driven pump 60HP, & Jockey pump 25 HP
II Fire hydrant system
40.101 SITC of 63mm dia single headed Gun mental Hydrant value with black cap Each 7800.00
and wheet as per IS 5290 etc., complete Make : WINCO / NEW Age
40.102 SITC of 63mm dia double headed Gun mental Hydrant value with black cap Each 14000.00
and wheet as per IS 5290 etc., complete.
40.103 SITC of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia Each 2100.00
40.104 SITC of Gun metal Branch pipe size of 63mm dia x 19mm dia as per IS 903 Each 3000.00
Make : WINCO/NEW AGE
40.105 SITC of RRL Fire hose of 63mm dia 15m length as per IS 84.23 binded with Each 8000.00
one set of male and female Instantainious Gun metal couping as per IS 903
WINCO/NEW AGE
40.106 SITC of Hose cabinet made out of 18 gauge M.S. Sheet with double glass door Each 4300.00
with locing arrangement and painted with two coats of Fire red Enamel
paint at outer side of the box and two coats of white enamel paint at inner
side of the box is to accomodated 2 nos. of Fire hose box size 20”x24”x10”
40.107 SITC of Hose reel cain M.S. Pressed reel of 600mm dia cn swign upto 17- Each 4800.00
degree with “L” shape carrier
40.108 SITC of 19mm dia with wire bided Nylon hose, length of 36.5 mtrs. Each 5200.00
40.109 SITC of approved make 15mm dia sprinkler bulb penent/wall mounted type Each 500.00
designed to operate 68 degrees centegraded Make Tyco/HD FIRE
40.11 SITC hydraulicallying sprinkler cabit value with water meter gaong beel and
trims as required, pressure gauge drain value bvall values check valve,
strainer etc.,
a) 100 mm dia Unit 80.00
b) 150 mm dia Unit 150.00
40.112 Wraping and Galing of U/G pipe line work includes one coat of anti
carrossion pint (Black) and two coats of Bituminous cloth.
40.112.1 a) 200 mm dia per mtr 360.00
40.112.2 b) 150 mm dia per mtr 250.00
40.112.3 c) 100 mm dia per mtr 200.00
40.112.4 d) 80 mm dia per mtr 150.00
40.113 Supplying Installation testing and Commissioning of Micro precess base Fire
alaram Control panel having power regulation Circuit, which conner to 230
push button switches. Tesh facility also with work test facility arrangement,
provided in the panel. All this electronic circuits components are assembled
in M.S. 16 gauge suitable panel cabinet with glass complete Make
Ravel/Golbe/Royale
40.116 SITC of electronic Hooler, it consists of electronic circuit to give dual Fire Each 1800.00
alaram sound with works 24V DC with speaker all enclosed in suitable in
M<S. 16 gaume red painted box.
40.117 SITC of Response Indicator consists of twin LED with electronic circular work Each 300.00
on 24 DC enclose in PVC retangular.
40.118 SITC of Galranised M.S. Junction box size 100x100x25mm suitable for fixing Each 150.00
of smoke/heat detector
40.119 SITC of 2x1.5 Sq.mm copper armoured cable with fixture etc., Rmt 150.00
40.12 SITC of 7Amp - 12 v Battering for fire alaram system Make Exide/AMCo Each 1200.00
Rate
Sl. No. Description Unit
Rs. Ps.
40.123 SITC of P.A. System console panel with push botton with speaker and
indicator on Accomodated in M.S. Cabinet with painting
a) 20 Zone cansole Each 48000.00
b) 40 Zone cansole Each 95000.00
c) 60 Zone cansole Each 1,25,000.00
40.124 P.A. System amplifier 25W RMS output with complete writing and controls Each 32000.00
accessories form front Make AHUJA
40.125 SITC of Ahuja make MIKE suitable to I.A. System Each 1500.00
40.126 SITC of 2x1.5 sqmm copper PVC seathed cable runs through PVC conducte Each 200.00
pipe with fixtures like clapms T. Sadless etc.,
40.127 Supplying of four bucket stand along with buckets. Each 1200.00
40.128 Supplying of two bucket stand along with buckets. Each 630.00
40.129 Supplying of HAND GLOVES. Pair 170.00
40.13 Supplying of first aid box. Each 215.00
40.131 Supplying of SAFETY MASK Each 64.00
40.132 Supplying of FIRST AID CHART with lamination. Each 225.00
40.133 Supplying and installation of RUBBER MAT 1mtr x 2mtr. - 10mm thick Each 1105.00
Rate
Sl. No. Description Unit
Rs. Ps.
Annexure 1
Co-efficient for painting, varnishing etc.,
table : 1 equivalent plain areas of uneven surfaces (clause 3.5)
Sl. No. Description of work How/Measured Multiplying Factor
(1) (2) (3) (4)
i) Panelled or framed and brazed or Measured flat(not girthed) 1.30 (for each side)
including CHOWKAT
ledged and battened or ledged, or frame, Edged, chocks, cleats, etc.,
shall be
batten-battened and braced joinery deemed to be included in the item
ii) Flush joinery Measured flat (not girthed) 1.20 (for each side)
including CHOWKAT
or frame, edges, chocks,cleats, etc.,
shall be
deemed to be included in the item
iii) Flush shutter Measured flat overall 1.20 (for each side)
iv) Fully glazed or gauzed joinery Measured flat (not girthed) 0.80 (for each side)
including CHOWKAT
or frame, Edges, chocks, cleats shall
be
deemed to be included in the item
v) Partly panelled and partly glazed Measured flat (not girthed) 1 (for each side)
including CHOWKAT
or gauzed joinery or frame, Edges, chocks, cleats shall
be
deemed to be included in the item
vi) Fully venetianed or louvred joinery Measured flat (not girthed) 1.80 (for each side)
including CHOWKAT
or frame, Edges, chocks, cleats, etc.,
shall be
deemed to be included in the item
vii) Weather boarding Measured flat (not girthed) 1.20 (for each side)
supporting frame
work shall not be measured
separately
viii) Wood shingle roofing Measured flat (not girthed) 1.10 (for each side)
ix) Boarding with covers fillets and Measured flat (not girthed) 1.05 (for each side)
match boarding
x) The and slate battening Measured flat overall ; no 0.80 (for painting all
deduction shall be made
for open spaces over)
xi) Trellis (or JAFFRI) work one-way Measured overall; no deduction 2 (for painting all over)
shall be made for
(1) (2) (3) (4)
or two way open spaces, supporting members
shall not be
measured separately
xii) Guad bars, balus-traders, gates Measured flat overall; no deduction 1 (for painting all over)
shall be made
greetings, grills expanded for open spaces, supporting
members shall not be
metal and railings measured separately.
xiii) Gates and open palisade fencing Measured flat overall; no deduction 1(for painting all over)
shall made
including standards, braces, rails for open spaces, supporting
members shall be not be
stays etc., measured separately (see note 1)
xv) Steel roller shutter Measured flat (size of opening) 1.10 (for each side)
overall; jam
guides, bottom raise and locking
arrangement, etc.,
shall be included in the item (top
cover shall be
measured separately)
xvi) Plain sheet steel doors and windows Measured flat (not girthed) 1.10 (for each side)
including frame, edges
etc.,
xvii) Fully glazed or gauged steel doors Measured flat(not girthed) 0.50 (for each side)
including frame, edges
and windows
xviii) Partly papelled and partly glazed Measured flat(not girthed) 0.80 (for each side)
including frame, edges
gauged steel door
xix) Collapsible gate Measured flat (size of opening) 1.50(for painting all over)
Note 1: The height shall be taken from bottom of lowest rail, if palisades do not go below it or from lower end of
palisades, if they project below lowest rail, up to top of palisades, but not up to top of standards, if they are higher
than palisades.
Note 2 : Where doors, windows, etc., are of composite types other than thoses included in this table, different portions
shall be measured separately with their appropriate coefficients, centre line of common rail being taken as the
dividing line between the two portions.
Note 3 : Measurements of painting doors, windows, collapsible gates, rolling shutters etc., as given in this table shall
be deemed to include painting, if required, of all iron fittings in the same shade.
Note 4 : When two faces of a door, window etc., are to be treated with different specified finishes, measurable under
separate items, edges of frames and shutters shall be treated with the one or the other type of finish and
measurement thereof shall be deemed to be include in the measurement of the face treated with that finish.
Note 5: In case where shutters are fixed on both faces of a frame, measurement for the door frame and shutter and on
one face shall be taken in the manner already described, while the additional shutter on the other face shall be
measured exclused of the frame.
Note 6 : Where shutter is provided with clearence exceeding 15 cm at top and / or at bottom, such openings shall be
deducted from the overall measurement and relevant coefficient applied.
38. Materials Requirements details
Granite / Metal
Surkhi /
Stones /
KSRRB/ Marbledust Mortar
Sl. Bricks Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust in cum
block etc in
cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
Mortar
1 0.5.1.1 Cement Mortar of mix 1:1 Cum 0.7125 20.40 1020.00
2 0.5.1.2 Cement Mortar of mix 1:2 Cum 0.95 13.60 680.00
3 0.5.1.3 Cement Mortar of mix 1:3 Cum 1.07 10.20 510.00
4 0.5.1.4 Cement Mortar of mix 1:4 Cum 1.07 7.60 380.00
5 0.5.1.5 Cement Mortarof mix 1:5 Cum 1.07 6.20 310.00
6 0.5.1.6 Cement Mortar of mix 1:6 Cum 1.07 5.00 250.00
7 0.5.1.7 Cement Mortar of mix 1:8 Cum 1.07 3.80 190.00
8 0.5.1.8 Cement Mortar of mix 1:10 Cum 1.07 3.00 150.00
9 0.5.1.1 Lime Mortar of mix 1:1 Cum 0.7125 9.02 451.00
10 0.5-2.2 Lime Mortar of mix 1:2 Cum 0.95 6.02 301.00
11 0.5-2.3 Lime Mortar of mix 1:3 Cum 1.07 4.52 226.00
12 0.5-3.1 Limesurkhi Mortar of mix 1:1 Cum 0.7125 9.02 451.00
13 0.5-3.2 Limesurkhi Mortar of mix 1:2 Cum 0.95 6.02 301.00
14 0.5-3.3 Limesurkhi Mortar of mix 1:3 Cum 1.07 4.52 226.00
15 0.5-4.1 Limesurkhi Sand Mortar of mix 1:1:1 Cum 0.475 0.475 6.02 301.00
16 0.5-4.2 Limesurkhi Sand Mortar of mix 1:1:2 Cum 0.357 0.357 4.52 226.00
17 0.5-5.1 Cement Mortar with Stone dust of mix 1:2 Cum 6.95 13.60 680.00
C=8.20 C=410.00
18 0.5-6.1 Cement Lime Mortar of mix 1:1:3 Cum 0.86 L=3.62 L=181.00
19 0.5-6.2 Cement Lime Mortar of mix 1:1:4 Cum 1.07 C=7.6 C=380.00
L=3.40 L=170.00
20 0.5-6.3 Cement Lime Mortar of mix 1:1:5 Cum 1.07 C=6.20 C=310.00
L=2.70 L=135.00
21 0.5-6.4 Cement Lime Mortar of mix 1:1:6 Cum 1.07 L=113.00
C=4.40 C=220.00
22 0.5-6.5 Cement Lime Mortar of mix 1:1:7 Cum 1.07 L=1.94 L=97.00
C=3.80 C=190.00
Granite / Metal
Surkhi /
Stones /
KSRRB/ Marbledust Mortar
Sl. Bricks Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust in cum
block etc in
cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
23 0.5-6.6 Cement Lime Mortar of mix 1:1:8 Cum 1.07 L=1.68 L=84.00
C=3.40 C=170.00
24 0.5-6.7 Cement Lime Mortar of mix 1:2:9 Cum 1.07 L=3.02 L=151.00
C=2.60 C=130.00
25 0.5-6.8 Cement Lime Mortar of mix 1:3:2 Cum 1.07 L=3.40 L=170.00
26 0.5-7.1 White cement Mortar with Marble 1:2 Cum 0.95 13.60 680.00
dust of mix
27 0.5-7.2 White cement Mortar with Marble dust of mix 1:3 Cum 1.07 10.20 510.00
28 0.5-7.3 White cement Mortar with Marble dust of mix 1:4 Cum 1.07 7.60 380.00
29 0.5-7.4 White cement Mortar with Marble dust of mix 1:5 Cum 1.07 6.20 310.00
30 0.5-8.1 Fly ash sand Mortar of mix 1:1.5:3 Cum 0.357 0.715 6.80 340.00
31 0.5-8.2 Fly ash sand Mortar of mix 1:2:4 Cum 0.356 0.715 5.00 250.00
32 0.5-8.3 Fly ash sand Mortar of mix 1:2.5:5 Cum 0.356 0.715 4.00 200.00
33 0.5-8.4 Fly ash sand Mortar of mix 1:3.6:5 Cum 0.366 0.715 3.20 160.00
EARTH WORK
1 2.6 Sand filling Cum 1
2 2.8 Filling Foundation with granite metal Cum 1 0.5
3 2.1 Sand cement bed with 5% cement Cum 1 1.43 71.40
4 2.11 Sand cement bed with 10% cement Cum 1 2.86 142.80
5 2.12 Sand Piles Sqmt 0.014 - -
6 2.13 Sand cement Piles Sqmt 0.014 0.04 2.00
Sl. Item No.
Best Description of item Unit Bitumen Cement Steel
No of SR
1 2 3 4 5 6 7
CEMENT CONCRETE
1 4.1 KSRB 4.1.1: Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
2 4.2 KSRB 4.1.2: Providing and laying ...... cement concrete of mix M 10 Cum - 220 Kg -
3 4.3 KSRB 4.1.3: Providing and laying ...... cement concrete of mix M 7.5 Cum - 180 Kg -
4 4.4 KSRB 4.1.4: Providing and laying ...... cement concrete of mix M 5 Cum - 160 Kg -
5 4.5 KSRB 4.1.5: Providing and laying ...... cement concrete of mix M 20 Cum - 300 Kg -
6 4.6 KSRB 4.1.6: Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
7 4.7 KSRB 4.1.7: Providing and laying ...... cement concrete of mix M 10 Cum - 220 Kg -
8 4.1 KSRB 4.2.1: Providing and laying ...... cement concrete of mix M 25 Cum - 340 Kg -
9 4.11 KSRB 4.2.2: Providing and laying ...... cement concrete of mix M 20 Cum - 320 Kg -
10 4.12 KSRB 4.2.3: Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
11 4.13 KSRB 4.2.4: Providing and laying ...... cement concrete of mix M 10 Cum - 220 Kg -
12 4.14 KSRB 4.2.5: Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
13 4.15 KSRB 4.2.6: Providing and laying ...... cement concrete of mix M 10 Cum - 220 Kg -
14 4.16 KSRB 4.2.7: Providing and laying ...... cement concrete of mix M 25 Cum - 340 Kg -
15 4.17 KSRB 4.2.8: Providing and laying ...... cement concrete of mix M 20 Cum - 320 Kg -
16 4.18 KSRB 4.2.9: Providing and laying ...... cement concrete of mix M 15 Cum - 240 Kg -
17 4.19 KSRB 4.2.10: Providing and laying ...... cement concrete of mix M 20 Sqm - 24 Kg -
18 4.2 KSRB 4.2.11: Providing and laying ...... cement concrete of mix M 20 Sqm - 27.2 Kg -
19 4.46 KSRB 4.9.2: Providing T.M.T. steel reinforcement for RCC work Qtl - 1.075 qtl
20 4.49.1 Providing and laying readymix concrete ....... M20 Cum - 320 Kg -
21 4.49.2 Providing and laying readymix concrete ....... M25 Cum - 340 Kg -
22 4.49.3 Providing and laying readymix concrete ....... M30 Cum - 360 Kg -
23 4.49.4 Providing and laying readymix concrete ....... M35 Cum - 390 Kg -
24 4.49.5 Providing and laying readymix concrete ....... M40 Cum - 420 Kg -
25 4.55 Providing and casting reinforced CC racks ....... M20 Sqm - 16 Kg -
26 4.56 Providing RCC loft (atta) Sqm - 30 Kg -
27 4.57 Providing and fixing RCC slabs 5 cms thick for wall shelves ..... M20 Sqm - 16 Kg -
28 4.58.1 Providing RCC design mix M20 ..... solid parapet ..... 7.5cms thick Sqm - 24 Kg -
29 4.58.2 Providing RCC design mix M20 ..... solid parapet ..... 10.00 cms thick Sqm - 32 Kg -
38. Materials Requirements details
Granite / Metal
Surkhi /
Stones / Bricks
KSRRB/ Marbledust Mortar
Sl. Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust cum
block etc in
in cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
1 5-1.1 Rubble stone masonry in foundation with mud
Mortar Cum 1.1 0.33
2 5-1.2 Rubble stone masonry in foundation with
cement Mortar in 1:8 Cum 1.1 0.35 1.254 62.7
3 5-1.3 Rubble stone masonry in foundation with
cement Mortar in 1:6 Cum 1.1 0.35 1.65 82.5
4 5-2.1 Size stone masonry in foundation with mud
Mortar Cum 1.05 0.28
5 5-2.2 Size stone masonry in foundation with
cement Mortar 1:8 Cum 1.05 0.3 1.064 53.2
6 5-2.3 Size stone masonry in foundation with
cement Mortar 1:6 Cum 1.05 0.3 1.4 70
7 5-3.1 Size stone masonry in basement with
cement Mortar Cum 1.449 0.28
8 5-3.2 Size ston masonry on basement with
cement Motar 1:8 Cum 1.449 0.3 1.064 53.2
9 5-3.3 Size stone masonry in basement with
cement Mortar 1:6 Cum 1.44 0.3 1.4 70
10 5-4.1 Size stone masonry in super structure with mud
Mortar Cum 1.449 0.28
11 5-4.2 Size stone masonry in super structure with
cement Mortar 1:8 Cum 1.449 0.3 1.064 53.2
12 5-4.3 Size stone masonry in super structure with
cement mortar 1:6 Cum 1.449 0.3 1.4 70
Granite / Metal
Surkhi /
Stones / Bricks
KSRRB/ Marbledust Mortar
Sl. Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust cum
block etc in
in cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
Stone Work
13 5-4.4 Size stone masonry in super structure with
cement mortar 1:4 Cum 1.449 0.3 2.128 106.4
14 11-May Hallow block masonry in cement mortar 1:4
40x20x20 cms 50kg/sqcm Sqm 12.11 Nos 0.02 0.15 7.36
15 12-May Hallow block masonry in cement mortar 1:4
40x20x20 cms 35kg/sqcm Sqm 12.11 Nos 0.02 0.15 7.38
16 13-May Hallow block masonry in cement mortar 1:4
40x20x20 cms 35kg/sqcm Sqm 12.11 Nos 0.012 0.082 4.09
17 14-May Solid block masonry in cement mortar 1:4
40x20x20 cms 35kg/sqcm Sqm 12.11 Nos 0.02 0.15 7.38
18 15-May Solid block masonry in cement mortar 1:4
40x20x20 cms 35kg/sqcm Sqm 12.11 Nos 0.012 0.082 4.09
19 5-29.1 Providing and fixing pre cast solid concrete kerb
size 450x200x400mm No. - - - 0.234 11.72
20 5.29.2 Providing and fixing pre cast solid concrete kerb
size 450x150x500mm No. - - - 0.22 11
21 5.3 Providing and fixing pre cast solid C.C. Kerb stones No. - - - 0.165 8.235
Brick Work
1 6-1.1 Non modular CL35 brick masonry in mud mortar
for basement and super structure Cum 485 Nos. 2.4
2 6-1.2 Non modular CL35 brick masonry in
cement mortar 1:8 for basement and super
structure Cum 485 0.26 0.912 45
3 6-1.3 Non modular CL35 brick masonry in
cement mortar 1:6 for basement and super
Granite / Metal
Surkhi /
Stones / Bricks
KSRRB/ Marbledust Mortar
Sl. Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust cum
block etc in
in cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
structure Cum 485 0.26 1.2 60
4 6-2.1 Non modular CL50 table moulded brick masonry
in mud mortar for basement and super structure Cum 485 2.4
5 6-2.2 Non modular CL50 table moulded brick masonry
in cement mortar 1:8 for basement and super
structure Cum 485 0.26 0.912 45.6
6 6-2.3 Non modular CL50 table moulded brick masonry
in cement mortar 1:6 for basement and super
structure Cum 485 0.26 1.2 60
7 6-2.4 Non modular CL50 table moulded brick masonry
in cement mortar 1:4 for basement and super
structure Cum 485 0.26 0.912 45.6
8 6-3.1 Non modular CL75 machine moulded brick
masonry in cement mortar 1:8 for basement and
super structure Cum 456 0.26 0.912 45.6
9 6-3.2 Non modular CL75 machine moulded brick
masonry in cement mortar 1:8 for basement and
super structure Cum 456 0.26 1.2 80
10 6-3.3 Non modular CL75 machine moulded brick
masonry in cement mortar 1:4 for basement and
super structure Cum 456 0.26 1.824 91.2
11 6-3.4 Non modular CL75 machine moulded brick
masonry in cement mortar 1:3 for basement and
super structure Cum 456 0.26 2.448 122.4
12 6-4.1 Modular CL35 brick masonry in mud mortar
for basement and super structure Cum 520 0.21
Granite / Metal
Surkhi /
Stones / Bricks
KSRRB/ Marbledust Mortar
Sl. Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust cum
block etc in
in cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
13 6-4.2 Modular CL35 brick masonry in cement
mortar 1:8 for basement and super structure Cum 520 0.225 0.8 39.9
14 6-4.3 Modular CL35 brick masonry in cement
mortar 1:6 for basement and super structure Cum 520 0.225 1.05 52.5
15 6-5.1 Modular CL50 table moulded brick masonry in
mud mortar for basement and super structure Cum 520 0.21
16 6-5.2 Modular CL50 tabale moulded brick masonry in
cement mortar 1:6 for basement and super
structure Cum 520 0.225 0.8 39.9
17 6-5.3 modualar CL50 table moulded brick masonry in
cement mortar 1:6 for basement and super
structure Cum 520 0.225 1.05 52.5
18 6-5.4 modualar CL50 table moulded brick masonry in
cement mortar 1:4 for basement and super
structure Cum 520 0.225 1.6 79.8
19 6-6.1 modualar CL75 machine moulded brick masonry
in cement mortar 1:8 for basement and super
structure Cum 520 - 0.225 0.8 39.9
20 6-6.2 modualar CL75 machine moulded brick masonry
in cement mortar 1:6 for basement and super
structure Cum 520 - 0.225 1.05 52.5
21 6-6.3 modualar CL75 machine moulded brick masonry
in cement mortar 1:4 for basement and super
structure Cum 520 - 0.225 1.60 79.80
22 6-6.4 modular CL75 machine brick masonry
in cement mortar 1:3 for basement and super
Granite / Metal
Surkhi /
Stones / Bricks
KSRRB/ Marbledust Mortar
Sl. Tiles / Cement / Lime / white
KSRRB Description Unit or Flyash /sand in
No Halllow /Solid cement
No. stone dust cum
block etc in
in cum
cum
Bags Kgs
1 2 3 4 5 6 7 8 9
structure Cum 520 - 0.225 2.14 107.10
23 6-7.1 Nonmodular CL35 brick partition wall 11.2 cms
thick in cm 1:4 with GI plastermesh Sqm 66.8 - 0.026 0.18 9.12
24 6-7.2 Nonmodular CL50 table moulded brick partition
walll 11.2 cms thick in cm 1:4 with GI
plastermesh Sqm 66.8 - 0.026 0.18 9.12
25 6-7.3 Nonmodular CL35 brick partition wall 11.2 cms
thick in cm 1:4 Sqm 66.8 - 0.026 0.18 9.12
26 6-7.4 Nonmodular CL50 table moulded brick partition
wall 11.2 cms thick in cm 1:4 Sqm 66.8 - 0.026 0.18 9.12
27 6-8.1 modular CL35 brick partition wall 10 cms thick in
cm 1:4 G I plastermesh Sqm 56.7 - 0.022 0.16 7.98
28 6-8.2 modular CL50 table moulded brick partition wall
10 cms thick in cm 1:4 with G I plastermesh Sqm 56.7 - 0.022 0.16 7.98
29 6-8.3 modular CL35 brick partition wall 10 cms thick in
cm 1:4 Sqm 56.7 - 0.022 0.16 7.98
30 6-8.4 modular CL50 table moulded brick partition wall
10 cms thick in cm 1:4 Sqm 58.7 - 0.022 0.16 7.98
Sl. Item No.
Best Description of item Unit Bitumen Cement Steel
No of SR
1 2 3 4 5 6 7
Drainage
1 11.37 KSRB 12-5.1: Construction brick masonry circular typ manhole
0.91 m internal dia No. - 300.00 Kg -
2 11.38 KSRB 12.5.2- -do- 1.67 m No. - 362 Kg -
3 11.39 KSRB 12-5.3 -do- 1.22 internal dia No. - 553 Kg -
4 11.4 KSRB 12-5.4 -do- 2.29m deep No. - 633 Kg -
5 11.41 KSRB 12-5.5 : Construction brick masonry circular type manhole
1.52m internal dia No. - 1000 Kg -
6 11.42 KSRB 12-5.6 -do- bottom 4.18m Nos - 1615 Kg -
7 11.43 KSRB 12-5.7 : Construction circular type manhole 1500mm internal dia Nos - 880 Kg -
8 11.51 KSRB 12-8.1 : Extra for item No. KSRB 12-8.1 depth beyond 450mm Each - 11.30 Kg -
9 11.52 KSRB 12-8.2 : Constrcuting brick masonry inspection chamber
500x700mm and 450mm depth Each - 96 Kg -
10 11.53 KSRB 12-8.2.1 : Extra for item no. KSRB 12-8.2 depth beyond
450mm and brick masonry Each - 12.30 Kg -
11 11.54 KSRB 12-8.3 : Construction brick masonry inspection chamber
600x850mm and 450mm depth Each - 120 Kg -
12 11.55 KSRB 12-8.3.1 : Extra for item No. KSRB 12-8.3 depth beyond
450 mm and brick Each - 14.20 Kg -
Materials Requirements details
Granite / Metal
Stones / Bricks
KSRRB/ Mortar
Tiles / Cement / Lime / white
Sl. No KSRRB Description Unit /sand in
Halllow /Solid cement
No. cum
block etc in
cum
Bags Kgs
1 2 3 4 5 6 7 8
14.01 14.1 Providing and laying flooring with B.S. Slab 10 cm
thick on sand bed 7.5 cm to 8 cm thick Sqm 0.11 0.0088 0.13
and pointed writer cm 1:3
14.02 14.2 Providing and laying flooring with B.S. Slab 10 cm
thick on C.M. bed 1:6, 25cm thick and pointed
with C.M. 1:3 Sqm 0.11 0.0043 0.27
14.03 14.3 Providing and laying flooring and steps machine
cut granite slabs 40mm thick on C.M. bed 1:6,
25mm thick, and pointed with C.M. 1:3 over
existing cc bed Sqm 0.11 0.0033 0.18
14.04 14.4 Providing and laying flooring and steps
fine dressed granite Sqm 0.11 0.0031 0.17
14.05 14.5 -do- Sqm 0.105 0.0028 0.15
14.6 14(6.1) Providing & Laying heavy duty cobble stones (60mm) Sqm 0.105 0.005
14.7 14(6.2) Providing & Laying heavy duty cobble stones (75cm) Sqm 0.105 0.005
14.8 14(7.1) Flooring with 1:2:4 cc Sqm 0.035 0.018 0.30
14.9 14(7.2) Flooring with 1:2:4 cc with red oxide Sqm 0.026 0.025 0.40
14.1 14(7.3) Flooring 40mm thick with an underlay of 30mm thick cc 1:2: Sqm 0.026 0.025 0.40
14.12 14(8.1) Linolium sheet 1.05 sqm, adhesive 0.20 kg Sqm
14.13 14(9.1) Metallic floor hardner 2.6 kg Sqm 0.1 0.016 0.37
14.14 14(9.2) Metallic floor hardner 2.6 kg Sqm 0.043 0.02 0.50
14.15 14(10.1) Tandoor blue slab 1.15 Sqm, pigment 0.45 kg Sqm 0.028 0.26
14.16 14(10.2) Shahabad slab 1.15 sqm, pigment 0.45 kg Sqm 0.028 0.26
14.17 14(10.3) cudapa slab 1.15 sqm, pigment 0.45 kg Sqm 0.028 0.26
Granite / Metal
Stones / Bricks
KSRRB/ Mortar
Tiles / Cement / Lime / white
Sl. No KSRRB Description Unit /sand in
Halllow /Solid cement
No. cum
block etc in
cum
Bags Kgs
1 2 3 4 5 6 7 8
14.18 14(11.1) marble chips 17.3 kgs, marble powder 0.0017
cum pigment 0.56 kgs Sqm 0.025 0.012 0.34
14.19 14(11.2) marble chips - 17.3 kgs, marble powder - 0.0017 cum,
white cement - 0.16 kgs, pigment Sqm 0.025 0.0125 0.18
14.2 14(11.3) Marble chips - 17.3 kgs, white cement 0.08 bags,
marble powder - 0.0017 cum, pigment Sqm 0.025 0.0125 0.18
14.21 14(11.4) Marble chips - 17.3 kgs, white cement 0.16 bags,
marble powder - 0.0017 cum, pigment Sqm 0.025 0.012 0.18
14.22 14(11.5) Alluminium sheet for strips - 0.042 sqm Sqm
14.23 14(11.6) Glass strips - 0.044 sqm Sqm
14.24 14(12.1) mosaic tiles - 1.1 sqm, pigment 0.30 kgs Sqm 0.028 0.31
14.25 14(12.2) white cement - 0.08 bags, pigment - 0.30 kgs Sqm 0.028 0.22
14.26 14(12.3) mosaic tiles - 1.1 sqm, white cement - 0.04 bags,
pigment - 0.30 kgs Sqm 0.028 0.26
14.27 14(12.4) white mosaic tiles - 1.10 sqm,
white cement - 0.17 bags Sqm 0.028 0.13
14.28 14(13.1) checkered mosaic tiles - 1.10 sqm, pigment - 0.3 kgs Sqm 0.013 0.3
14.29 14(13.2) checkered mosaic tiles - 1.10 sqm,
white cement - 0.088 bags, pigment - 0.3 kgs Sqm 0.013 0.22
14.3 14(13.3) mosaic tiles - 1.10 sqm, white cement - 0.04 bags,
pigment - 0.30 kgs Sqm 0.013 0.26
14.31 14(13.4) mosaic tiles - 1.10 sqm, white cement -0.17 bags Sqm 0.013 0.13
14.32 14(14.1) white glazed tiles - 46 nos. white cement - 0.002 bags Sqm 0.013 0.19
14.33 14(14.2) white glazed tiles - 46 nos. white cement - 0.002 bags Sqm 0.013 0.19
14.34 14(14.3) white glazed tiles - 46 nos. white cement - 0.002 bags Sqm 0.013 0.19
14.35 14(14.4) white glazed tiles - 46 nos. white cement - 0.002 bags Sqm 0.013 0.19
14.36 14(14.5) ceramic tiles - 1.10 sqm, white cement - 0.002 bags Sqm 0.013 0.19
14.37 14(15.1) marble slabs - 1.15 sqm, white cement - 0.01 bags Sqm 0.028 0.22
14.38 14(16.1) Sqm 0.02 0.2
14.39 14(16.2) red oxide - 0.28 kg Sqm 0.02 0.2
14.4 14(17.1) glazed tiles - 46 nos. Sqm 0.01 0.18
Granite / Metal
Stones / Bricks
KSRRB/ Mortar
Tiles / Cement / Lime / white
Sl. No KSRRB Description Unit /sand in
Halllow /Solid cement
No. cum
block etc in
cum
Bags Kgs
1 2 3 4 5 6 7 8
14.41 14(17.2) Glazed tiles 46 nos. Sqm 0.01 0.18
14.42 14(18.1) marble slab - 1.15 sqm Sqm 0.012 0.22
15.01 15(1.1) Finishing Work Sqm 0.002 0.02
15.02 15(1.2) Finishing Work Sqm 0.002 0.02
15.03 15(1.3) Finishing Work Sqm 0.002 0.02
15.04 15(1.4) Finishing Work Sqm 0.002 0.02
15.05 15(1.5) Finishing Work Sqm 0.004 0.038
15.06 15(1.6) Finishing Work Sqm 0.004 0.038
15.07 15(2.1) Finishing Work Sqm 0.001 0.015
15.08 15(2.2) Finishing Work Sqm 0.001 0.015
15.09 15(3.1) Finishing Work Sqm 0.01 0.13
15.1 15(3.2) Finishing Work Sqm 0.01 0.98
15.11 15(3.3) Finishing Work Sqm 0.01 0.06
15.12 15(3.4) Finishing Work Sqm 0.01 0.16
15.13 15(3.5) Finishing Work Sqm 0.01 0.12
15.14 15(3.6) Finishing Work Sqm 0.01 0.08
15.15 15(3.7) Finishing Work Sqm 0.02 0.2
15.16 15(3.8) Finishing Work Sqm 0.02 0.15
15.17 15(3.9) Finishing Work Sqm 0.02 0.099
15.18 15(3.10) Finishing Work Sqm 0.02 0.22
15.19 15(3.11) Finishing Work Sqm 0.02 0.16
15.2 15(3.12) Finishing Work Sqm 0.02 0.11
15.21 15(3.13) Finishing Work Sqm 0.13 0.13
15.22 15(3.14) Finishing Work Sqm 0.013 0.098
15.23 15(4.1) Water proof compound - 0.13 kgs Sqm
15.24 15(4.2) Water proof compound - 0.09 kgs Sqm
15.25 15(4.3) Water proof compound - 0.125 kgs Sqm
15.26 15(4.4) Water proof compound - 0.15 kgs Sqm
15.27 15(4.5) Water proof compound - 0.167 kgs Sqm
15.28 15(4.6) Water proof compound - 0.22 kgs Sqm
15.29 15(4.7) Water proof compound - 0.167 kgs Sqm
Granite / Metal
Stones / Bricks
KSRRB/ Mortar
Tiles / Cement / Lime / white
Sl. No KSRRB Description Unit /sand in
Halllow /Solid cement
No. cum
block etc in
cum
Bags Kgs
1 2 3 4 5 6 7 8
15.3 15(5.1) Providing tough cement plastering cm 1:4 Sqm 0.017 0.125
15.31 15(5.2) Providing tough cement plastering cm 1:6 Sqm 0.017 0.08
15.32 15(6) Providing flooring coat of cement Sqm 0.028
15.33 15(7) Lime - 0.0025/cum Sqm
Sqm
Sqm
Sqm
Sqm
15.38 15(10.1) burnt lime - 0.003 quintal Sqm
15.39 15(10.2) Burnt lime - 0.0015 quintal Sqm
15.4 15(10.3) Burnt lime - 0.003 quintal Sqm
15.41 15(10.4) Burnt lime - 0.015 quintal Sqm
15.42 15(11.1) Sqm 0.10 kg
15.43 15(11.2) Linseed oil 0.08 ltr. Sqm 0.10 kg
15.44 15(12.1) Gopi - 0.025 kg, white lime - 0.003 quintal Sqm
15.45 15(12.2) Burnt lime 0.0015, Gopi - 0.013 Sqm
15.46(1) 15(13.1) Distemper - 0.081 ltr Sqm
15.46(2) 15(13.2)
15.47 15(13.3) Dry distemper - 0.1 kg, whitening - 0.1 kg
15.48(2) 15(13.5) Dry distemper - 0.06 kg
15.48(3) 15(13.7) Dry distemper - 0.04 kg
15.49 15(14.1) Distemper - 0.081 ltr, oil bound - 0.15 kg
15.50(1) 15(14.3) Oil bound - 0.1 kg
15.51 15(15.1) Plastic emulsion paint - 0.12 ltr
15.52(1) 15(15.3) Plastic emulsion paint - 0.073 ltr
15.52(3) 15(15.5) Plastic emulsion paint - 0.049 ltr
15.53 15(16.1) Water proof cement paint - 0.3 kg
15.54(1) 15(16.2) Water proof cement paint - 0.18 kg
15.54(2) 15(16.3) Water proof cement paint - 0.12 kg
15.55 15(17.1) White lead paint - 0.1 ltr
15.56 15(17.2) Pink Primer paint - 0.09 ltr
Granite / Metal
Stones / Bricks
KSRRB/ Mortar
Tiles / Cement / Lime / white
Sl. No KSRRB Description Unit /sand in
Halllow /Solid cement
No. cum
block etc in
cum
Bags Kgs
1 2 3 4 5 6 7 8
15.57 15(17.3) Aluminium paint primer - 0.1 ltr
15.58 15(17.4) Enamel primer - 0.09 ltr
15.59 15(17.5) Liquid wood filler - 0.075 ltr
15.6 15(17.6) Enamel metal paint - 0.15 ltr
15.61(1) 15(17.7) Enamel metal paint - 0.09 ltr
15.61(2) 15(17.8) Enamel metal paint - 0.09 ltr
15.62 15(17.9) Under coat flatting varnish - 0.07 ltr., Varnish - 0.075 ltr
15.63(1) 15(17.10) Varnish - 0.075 ltr
15.63(2) 15(17.11) Varnish - 0.075 ltr
15.64 15(17.12) Spirit - 0.16 ltr, Shellac - 0.024 kg,
Linseed oil - 0.012 ltr, pigment - 0.012 kg
15.65 15(17.13) Spirit - 0.095 ltr, Shellac - 0.013 kg,
Linseed oil - 0.007 ltr.,
15.66 15(17.14) Bees wax - 0.05 kg, Linseed oil - 0.036 ltr.,
Tarpentine - 0.024 ltr., Varnish - 0.012 ltr
15.67 15(17.15) Bees wax - 0.25 kg, Linseed oil - 0.018 ltr.,
Tarpentine - 0.012 ltr., Varnish - 0.06 ltr
15.68 15(17.16) Coltar paint - 0.095 ltr
15.69 15(17.17) Coltar paint - 0.057 ltr
15.7 15(17.18) Coltar paint - 0.057 ltr
15.71 15(17.19) Black japan paint - 0.07 ltr
15.72 15(17.20) Black japan paint - 0.07 ltr
15.73 15(18.01) Ready mix primer paint - 0.09 ltr
15.74 15(18.2) Enamel metal paint - 0.15 ltr
15.75 15(18.3) Enamel metal paint - 0.09 ltr
15.76 15(18.4) Alluminium paint - 0.08 ltr
15.77 15(18.5) Alluminium paint - 0.046 ltr
15.78 15(18.6) Black japan paint - 0.07 ltr
15.79 15(18.7) Black japan paint - 0.07 ltr
15.8 15(19.1) Ready mix primer paint - 0.084 ltr.,
plaster of paris - 0.05 kg
Granite / Metal
Stones / Bricks
KSRRB/ Mortar
Tiles / Cement / Lime / white
Sl. No KSRRB Description Unit /sand in
Halllow /Solid cement
No. cum
block etc in
cum
Bags Kgs
1 2 3 4 5 6 7 8
15.81 15(19.2) Wall paint - 0.11 ltr., patti - 0.025 kg
15.82 15(19.3) Wall paint - 0.65 ltr., patti - 0.015 kg
15.83 15(20.1) Ready mix primer paint - 0.148 ltr.,
15.84 15(20.2) Ready mix primer paint - 0.09 ltr.,
15.85 15(21.1) Wax polish - 0.01 kg
15.86 15(21.2) Wax polish - 0.007 kgs
15.87 15(22.1) Marble chips - 0.87 kgs,
marble powder - 0.0007 cum, pigment - 0.285 kgs 0.031 0.37
15.88 15(22.2) White cement - 0.41 kg, Marble chips - 0.87 kgs,
Marble powder - 0.0007 cum, pigment - 0.285 kgs 0.03 0.3
15.89 15(22.3) White cement - 0.04 bags, Marble chips - 8.7 kgs,
Marble powder - 0.0007 cum, pigment - 0.28 kgs 0.03 0.34
15.9 15(22.4) White cement - 0.08 bags, Marble chips - 8.7 kgs,
Marble powder - 0.0007 cum 0.03 0.3
15.92 15(23.1) Mosaic tiles - 1.10 Sqm 0.012 0.258
15.93 15(23.2) Mosaic tiles - 1.10 Sqm, pigment 0.462 kgs 0.012 0.258
15.94 15(23.3) Mosaic tiles - 1.10 sqm, white cement - 0.066 bags,
pigment 0.55 kgs 0.01 0.192
15.95 15(23.4) Mosaic tiles - 1.10 sqm, white cement - 0.13 bags 0.01 0.12
Materials Requirements details
KSRRB/
Sl. No KSRRB Description Unit
No.
1 2 3 4 5
16.4 24.9 Repairs to Building Sqm Nitric acid - 0.01 ltr / sqm
16.5 24.1 Repairs to Building Sqm paint remover - 0.07 ltr/sqm, blow, lamp, brushes,
scraper, turpentine oil, putty at 5% on
paint removal cost
16.6 24.11 Repairs to Building Sqm caustic soda - 0.073 kg/sqm, scraper, brushes,
terpentine oil, acetic acid or vinegar,
putty 10% on cost of soda
16.7 24.12 Repairs to Building Sqm Kerosene oil - 0.10 ltr/sqm, scraper, putty at 5% on
cost of kerosene oil
16.9 24.14 Repairs to Building Sqm Kerosene oil - 0.10 ltr/sqm, scraper, putty at 5% on
cost of kerosene oil
16.1 24.15 Repairs to Building Sqm Paint remover - 0.07 ltr/sqm, brushes, scraper,
terpentine oil, putty at 2% on paint removal cost
16.12 24.17 Repairs to Building EACH Honne wood - 0.002 cum / each
16.13 24.18 Repairs to Building EACH Mathi / Nandi wood - 0.002 cum / each
16.14 24.19 Repairs to Building EACH Sal wood - 0.002 cum / each
16.15 24.2 Repairs to Building EACH Teak wood - 0.002 cum / each
16.16 24.21 Repairs to Building EACH Honne wood - 0.005 cum / each
16.17 24.22 Repairs to Building EACH Mathi / Nandi wood - 0.005 cum / each
16.21 24.26 Repairs to Building EACH M.S. flat 300 mm x 25mm x 3mm - 0.20 kg/each,
screwe, 40mm - 4.00 nos / each
Honne wood, battens including wastage at 2% -
16.22 24.27 Repairs to Building CUM
0.12
cum / cum
Mathi / nandi wood battens including wastage at
16.23 24.28 Repairs to Building CUM
2%-
0.12 cum/cum
Sal wood battens including wastage at 2% - 0.12
16.24 24.29 Repairs to Building CUM
cum/
KSRRB/
Sl. No KSRRB Description Unit
No.
1 2 3 4 5
cum
16.28 24.33 Repairs to Building Metre. Teak wood - 0.0001 cum / meter
Honne wood beads including wastages - 0.0001
16.29 24.34 Repairs to Building Metre.
cum/
metre
16.3 24.35 Repairs to Building Metre. Putty for filling holes - 0.068 kg/metre
16.31 24.36 Repairs to Building Sqm cement - 0.11 qntl/sqm
16.32 24.37 Repairs to Building Sqm cement - 0.11 qntl/sqm
16.33 24.38 Repairs to Building Metre. Cement - 0.01 bag/metre, sand 0.001 cum/metre
16.34 24.39 Repairs to Building Sqm bitumen 85/25 grade - 0.045 kg/sqm, sand - 0.001
cum/sqm
16.35 24.4 Repairs to Building Sqm cement - 0.204 bag / sqm, sand - 0.02 cum / sqm
16.36 24.41 Repairs to Building Sqm cement - 0.152 bag / sqm, sand - 0.02 cum / sqm
16.37 24.42 Repairs to Building Sqm cement - 0.10 bags / sqm, sand - 0.02 cum / sqm
16.37.2 24.43 Repairs to Building Sqm cement - 0.025 bags / sqm, sand - 0.005 cum / sqm
16.39 24.44 Repairs to Building Sqm cement - 0.20 bags / sqm, sand - 0.02 cum / sqm
16.4 24.45 Repairs to Building Sqm cement - 0.015 bag / sqm, sand - 0.002 cum / sqm
16.41 24.46 Repairs to Building Sqm cement - 0.01 bag / sqm, sand - 0.002 cum / sqm
Materials Requirements details
Chapter 21
Sl.No. Item Bitumen//CRMB Emulsion/ cut back MC 70
1 21.4.1 - 0.8 Kg /Sqm
2 21.4.2 - 1.0 Kg /Sqm
3 21.5 - 1.3 Kg /Sqm
4 21.6 - 0.8 Kg /Sqm
5 21.7 0.25 Kg
6 21.8 0.3 Kg / Sqm
7 21.9 0.4 Kg / Sqm
8 21.10.1 - 0.2 Kg / Sqm
9 21.10.2 0.2 Kg / Sqm -
### 21.11.1,21.11.2 0.0726 MT / Cum
### 21.12 0.003 MT / Sqm
### 21.13.1 0.068 MT / Cum
### 21.13.2 0.0724 MT / Cum
### 21.14 0.005 MT / Sqm
### 21.15 0.0068 MT / Sqm
### 21.16 0.003 MT / Sqm17
### 21.17 0.103 MT / Cum
### 21.18.1/21.19.6 0.092 MT / Cum
### 21.18.2/21.19.2 0.103 MT / Cum
### 21.20.1/21.20.2/21.20.3
21.20.4/21.20.5/21.20.6
21.20.7/21.20.8 0.115 MT / Cum
### 21.21.1/21.21.2 0.103 MT / Cum
### 21.22.1,2,3,4,5,6 0.141 MT / Cum
### 21.23.1,2 0.117 MT / Cum
### 21.26 0.0018 MT / Cum
### 21.27 1.1 Kg/Sqm
### 21.28 0.0012 MT/Sqm
### 21.29 0.001 Mt/Sqm
### 21.30,31,32,33,34 0.00146 MT / Sqm
### 21.35 0.00215 MT / Sqm
### 21.36,37 0.0022 MT / Sqm
### 21.38,39 0.0019 MT / Sqm
### 21.40,41 0.0022 MT/Sqm
### 21.42,43 0.0019 MT/ Sqm
### 21.44 0.0019 MT /Sqm
### 21.45 0.000980 MT /Sqm
### 21.45.2 0.00068 MT Sqm
Chapter 21
Sl.No. Item Bitumen//CRMB Emulsion/ cut back MC 70
### 21.46 0.000679 MT Sqm
### 21.47 0.00582 MT/Sqm
### 21.52 0.081 MT /Sqm
### 21.55,56 0.1756 MT / Cum
### 21.57,57,58 0.109 MT /Cum
### 21.59 0.109 MT /Sqm
### 21.60,61 0.00098 MT / Sqm
### 21.62 0.00068 MT /Sqm
### 21.63 0.00068 MT /Sqm
### 21.64 0.00121 MT / sqm
### 21.65 0.000858 MT / Sqm
### 21.66 0.000527 MT /Sqm
### 21.67 0.0009 MT /Sqm
### 21.68 0.0011 MT /Sqm
### 21.69 0.0015 MT /Sqm
### 21.7 0.00105 MT /Sqm
### 21.71 - 0.0987 MT /Cum
### 21.72 - 0.153 MT / Cum
### 21.73 - 0.1865 MT /Cum
Materials Requirements details
Item No.
Sl.No. Brief Description of Item Unit Bitumen Cement Steel
of SR
1 2 3 4 6 7 8
Cement Concrete Pavement
1 22.1 KSRRB M-600.1 : Construction of dry lean
cement concrete mix M-5 Cum 160Kg -
2 22. 2. 1 KSRRB M-600. 2 : Construction of unreinforced,
dowen jointed,plain cement concrete pavement
M- 30 Cum 306 Kg -
3 22. 2.1 KSRRB M-600-2: Construction of unreinforcet,
dowen jointed, plain cement concrete pavement
M- 40 Cum 420 -
3 22.3 KSRRB M-600-3 :Construction of rolled cement
concrete mix M7.5 opc cement Cum 180 Kg -
4 22.4 KSRRB M-600-5:Construction of base sub-base
mix M5 Opc cement Cum 160 Kg -
5 22.5 KSRRB M-600-6. Construction of reinforced,
dowel jointed,plain cement concrete pavement
M30 Cum 360 Kg -
6 22.6.1 Cement conrete pavement, construction of
un-reinforced plain cement concrete M-30 Cum 360 Kg -
7 22.6.1 Cement concrete pavement, construction of
un-reinforced plain cement concrete M-20 Cum 300 Kg -
Bridges
1 25.1 KSRRB 1100-1 Bored/cast in situ RCC 1000mm
dia piles - M20 m 320 Kg
2 25.1.1 KSRRB 1100-1 Bored/cast in situ RCC 1000mm
dia piles - M30 m 360 Kg
3 25.1.2 KSRRB 1100-1 Bored/cast in situ RCC 1000mm
dia piles - M35 m 390 Kg
4 25.2 KSRRB 1100.2 Driving cast-in-place vertical RCC
500mm dia - M20 m 320 Kg
5 25.2.1 KSRRB 1100-1 Bored/cast in situ RCC 500mm
dia piles - M30 m 360 Kg
6 25.2.2 KSRRB 1100-1 Bored/cast in situ RCC 500mm
dia piles - M35 m 390 Kg
7 25.3 KSRRB M-1100-3.1 Bored/cast in situ RCC Pile
with OPC - M35 m 390 Kg
8 25.4 KSRRB M 1100-3.2 -do- B. Pile diamtre
=1000mm-M35 m 390 Kg
9 25.5 KSRRB M 1100-3.3 -do- C. pile diamtre
=1200mm-M35 m 390 Kg
10 25.6 KSRRB M1100-4.1 Driven cast-in-place vertical
RCC Pile with OPC cement design mix M35 m 390 Kg
11 25.7 KSRRB - M1100-4.2-DO-Pile diametre
= 1000mm m 390 Kg
12 25.8 KSRRB - M1100-4.3 -do- pile diamtre
=1200mm m 390 Kg
13 25.9 KSRRB M1100-4.4 - Driven precast vertical
RCC Piles with OPC cement design mix M35
- file diamtre = 500mm m 390 Kg
14 25.1 KSRRB M1100-4.5 -do- pile diamtre = 750mm
0 m 390 Kg
15 25.11 KSRRB M1100-4.6 -Do- pile diamtre = 1000mm
0 m 390 Kg
Materials Requirements details
Item No.
Sl.No. Brief Description of Item Unit Bitumen Cement Steel
of SR
1 2 3 4 6 7 8
16 25.12 KSRRB M-1100-4.7 Driven precast vertical RCC
Piles with OPC cement design mix M35 - size
of pile = 300mm x 300mm m 390 Kg
17 25.13 KSRRB M1100-4.8 -do- size of pile
=500mm x 500mm - M35 m 390 Kg
18 25.14 KSRRB M1100-4.9 : -do- size of pile
=750mm x 750mm - M35 m 390 Kg
19 25.15 KSRRB M1100-5: Driven vertical steel piles
86.28
as per drawing = pile 400 x 250mm (ISHB series)
20 25.16 KSRRB M1100-6: Driven vetical steel piles
as per drawing = H section steel column 97.16
450 x 250mm (ISHB Seiries) Kg/m
21 25.18 KSRRB M1100-8.1: Cement Concrete for
reinforced concrete in pile cap as per drawing
and technical specification complete A.RCC with
OPC cement design M20 Cum 320 Kgs -
22 25.19 KSRRB M1100-8.2-do- A. RCC with OPC
cement design mix M-20 Cum 320 Kgs -
23 25.2 KSRRB M1100-9.1 Cement concrete for
reinforced concrete inm pile cap as per drawing
and technical specifications - B. RCC with OPC
Cement design mix M25 Cum 340 Kgs -
24 25.21 KSRRB M1100-9.2: -do- RCC with OPC cement
design mix M25 Cum 340 Kgs -
25 25.22 KSRRB M1100-10.1: Cement concrete for
reinforcement concrete in pile cap per drawing
and technical specification - C. RCC with OPC
cement design mix M30 Cum 360 Kgs -
26 25.23 KSRRB M1100-10.2 -do- C. RCC with OPC
cement design mix M30 Cum 360 Kgs -
27 25.24 KSRRB M1100-11.1: Cement concrete for
reinforced concrete in Pile cap complete as per
drawing -D. RCC with OPC cement design
mix M35 Cum 390 Kgs -
28 25.25 KSRRB M1100-11.2: -do- D. RCC with OPC
cement design mix M35 Cum 390 Kgs -
29 25.26 KSRRB M1100-12 Providing and laying of PCC
M15 levelling course 100mm thick below Cum 240 Kgs -
30 25.27 KSRRB M1100-13. Supplying, fitting and 1.05
placing uncoated TMT bar reinforcement Tonne - Tonne
31 25.28 KSRRB M1100-14: Supplying, fitting and
placing uncoated Mild steel reinforcement in 1.05
foundation as per drawing Tonne - Tonne
32 26.5.1 KSRRB M1200-3.1 i) RCC with OPC cement
design mix M20 Cum 320 Kg
33 26.5.2 KSRRB M1200.3.2 ii) -do- with M25 Cum 340 Kgs -
26.5.3
34 KSRRB M1200-3.3 iii) -do- RCC with OPC cement
design mix M35 Cum 390 Kgs -
35 26.5.4 KSRRB M1200-4.1 : i) PCC design mix M15 with
OPC cement Cum 240 Kgs -
36 26.5.5 KSRRB M1200-4.2 ii) PCC with OPC cement
Materials Requirements details
Item No.
Sl.No. Brief Description of Item Unit Bitumen Cement Steel
of SR
1 2 3 4 6 7 8
design mix M20 Cum 300 Kgs -
37 26.5.6 KSRRB M1200-4.3 iii) RCC with OPC cement
design mix M20 Cum 320 Kgs -
38 26.5.7 KSRRB M1200-4.4 : iv) PCC with OPC cement
design mix M25 Cum 340 Kgs -
39 26.5.8 KSRRB M1200-4.5: v) RCC with OPC cement
design mix M25 Cum 340 Kgs -
40 26.5.9 KSRRB M1200-4.6 vi) PCC with OPC cement
design mix M30 Cum 360 Kgs -
41 26.5.10 KSRRB M1200-4.7 vii) RCC with OPC cement
design mix M30 Cum 360 Kgs -
42 26.5.11 KSRRB M1200-4.8 viii) RCC with OPC cement
design mix M35 Cum 390 Kgs -
43 26.5.12 KSRRB M1200-4.9 ix) RCC with OPC cement
design mix M40 Cum 420 Kgs -
44 26.6 KSRRB M1200-5.1: Plain/Reinforced cement
concrete, in well foundation complete as per
drawing and technical specification mix M20 Cum 320 Kgs -
45 26.7 KSRRB M1200-5.2: Plain/reinforced cement
concrete, in well foundation complete as per
drawing - M20 Cum 320 Kgs -
46 26.8 KSRRB M1200-6.1: Plain/Reinforced cement
concrete, in well foundation complete ii) PCC
with OPC cement design mix M25 Cum 340 Kgs -
47 26.9 KSRRB M1200-6.2: Plain/Reinforced cement
concrete, in well foundation complete mix M25 Cum 340 Kgs -
48 26.1 KSRRB M1200-7.1: Plain/Reinforced cement
concrete, in well foundation complete mix M30 Cum 360 Kgs -
49 26.11 KSRRB M1200-7.2: Plain/reinforced cement
concrete, in well foundation complete as per
drawing design mix M30 Cum 360 Kgs -
50 26.12 KSRRB M1200-8.1: Plain/reinforced cement
concrete, in well foundation complete as per
drawing iv) PCC with OPC cement design
mix M35 Cum 390 Kgs -
51 26.13 KSRRB M1200-8.2: Plain/reinforced cement
concrete, in well foundation complete as per
drawing and Technical specification PCC with
OPC cement design mix M35 Cum 390 Kgs -
52 26.14 KSRRB M1200-9.1 (i) PCC with OPC cement
design mix M20 Cum 320 Kgs -
53 26.15 D. Intermediate Plug-Plain/reinforced cement
concrete, in well foundation
54 26.15.1 KSRRB M1200-9.2 (ii) PCC with OPC cement
design mix M25 Cum 340 Kgs -
55 26.15.2 KSRRB M1200-9.2 (ii) PCC with OPC cement
design mix M30 Cum 360 Kgs -
56 26.16 E-Top Plug : KSRRB M1200-10.1
(i) i) PCC design mix M15 with OPC cement Cum 240 Kgs -
57 26.17 KSRRB M1200-10.2: (ii) PCC with OPC
cement design mix M0 Cum 320 Kgs -
58 26.18 KSRRB M1200-10.3 : (iii) PCC with OPC
cement design mix M20 Cum 340 Kgs -
Materials Requirements details
Item No.
Sl.No. Brief Description of Item Unit Bitumen Cement Steel
of SR
1 2 3 4 6 7 8
59 26.19 KSRRB M1200-10.4 : (iv) PCC with OPC
cement design mix M30 Cum 360 Kgs -
26.2
60 KSRRB M1200-11.1 : Plain/reinforcement cement
concrete, in well foundation F, well cap i) RCC
with OPC cement design mix M20 Cum 320 Kgs -
61 26.21 KSRRB M1200-11.2 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification i) RCC with
OPC cement design mix M20 Cum 320 Kgs -
62 26.22 KSRRB M1200-11.3 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification i) RCC with
OPC cement design mix M20 Cum 320 Kgs -
63 26.23 KSRRB M1200-11.4 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification (ii) RCC with
OPC cement design mix M25 Cum 340 Kgs -
64 26.24 KSRRB M1200-11.5 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification (iii) RCC with
OPC cement design mix M25 Cum 360 Kgs -
65 26.25 KSRRB M1200-11.6 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification RCC with
OPC cement design mix M25 Cum 360 Kgs -
66 26.26 KSRRB M1200-11.7 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification (iv)RCC with
OPC cement design mix M35 Cum 390 Kgs -
67 26.27 KSRRB M1200-11.8 : Plain/reinforced cement
concrete, in well foundation complete as per
drawing and technical specification: RCC with
OPC cement design mix M35 Cum 390 Kgs -
68 26.28 KSRRB M1200-12 : Plain/reinforced cement
concrete in well foundation complete as per
drawing and technical specification (v)RCC with
OPC cement design mix M40 Cum 420 Kgs -
69 26.126 KSRRB M1200-48.1 : Construction of cement
concrete kerb with top and bottom width 115 and
165mm respectively 250mm high in M-20 grade
m 15.83 Kgs -
PCC on M10 Grade
70 26.127 KSRRB M1200-48.2 : Construction of cement
concrete kerb with top and bottom width 115 and
165mm respectively 250mm high in M-20 grade
m 15.83 Kgs -
PCC on M10
71 26.128 KSRRB M1200-49.1 : Cast-in-Situ cement
concrete M20 kerb with channel, construction of
cement concrete kerb with channel with top and
bottom with 115 and 165mm m 30.03m -
72 26.129 KSRRB M1200-49.2 : Cast-in-situ cement
Materials Requirements details
Item No.
Sl.No. Brief Description of Item Unit Bitumen Cement Steel
of SR
1 2 3 4 6 7 8
concrete M20 kerb with channel m 30.03/m -
73 26.130.1 Providing and fixing 3m long 25mm dia TMT
dowel bars 1.5m-Providing and fixing -do- LWL 11.5
in open foundation up to 3m Each - Kg
74 26.130.2 Providing and fixing 3m long 25mm dia TMT
dowel bars 1.5m -do- below LWL in open 11.5
foundation beyond 3m Each - Kg
75 26.130.13 Providing and fixing 3m long 25mm dia TMT
dowel bars 1.5m -do- for well foundation below 11.5
LWL upto 3m Each Kg
76 26.130.4 Providing and fixing 3m long 25mm dia TMT
dowel bars 1.5m -do- for well foundation below 11.5
LWL beyond 3m Each Kg
77 27.18 KSRRB M2100-10 Plain cement concrete M10
with OPC cement Cum 220 Kgs -
78 27.19 KSRRB M2100-11: Brick Masonry work in
cement mortar 1:3 in foundation complete
Tonne Tonne
TMT bar reinforcement in super structure complete
152 29.3 KSRRB M2300-15 : High tensile steel wires / 1.02
strands including all accessories Tonne Tonne
153 29.31 KSRRB M2300-16 : Providing and laying cement
concrete wearing coat with OPC cement design
mix M30 Cum 360 Kgs
154 30.3 KSRRB M2500-2 : Providing and laying of apron
Buildings :
1 Cement Mortar 2
2 Lime Mortar 2
3 Lime Surkhi mortar 2
4 Lime surkhi sand mortar 2
5 Cement Lime mortar 3
6 White cement mortar 3
7 Fly as sand mortar 3
8 Earthwork Excavation in ordinary soil 5
9 EWE soft rock without blast 5
10 EWE hard rock with blasting 5
11 EWE hard rock by cheseling / wedging 5
12 Benching hard rock 6
13 Filling available Earth 6
14 Re-filling available Earth 6
15 Providing & fillin sand 6
16 Sand cementbed 6
17 Sand piles 7
18 EWE mechanical means 7
19 Chloropyriphos emulisfiable 9
20 Chemical emulsion 10-Sep
21 General disinfections services 10
22 Plain cement concrete 13-Dec
23 Reinforced cement concrete 13 to 15
24 Lath plaster 16
25 Centering & Shuttering 16 to 18
26 Mild steel RCC 19
27 TMT steel for RCC 19
28 Ready Mix concrete 19
29 RCC Loft (atta) 20
30 RCC Slab 20
31 Uncoarsed masonry 25
32 Coaresed masonry 25
33 C.C Hallow back 27
34 Precast concrete solid block 27
35 Concrete kerb stone 28
36 Granite slabs 28
37 Burnt Brick Masonry with modular brick 30 to 32
INDEX
76 Wash basin 82 to 84
77 Kitchen sink / lab sink 85
78 Mirror 85
79 Footrest 91
80 C.I. Nahani trap 92
81 Galvanised/MS tubes 94
82 Water meter with stop cock 96
83 Brass stop cock 97
84 Brass gate valve 97 to 98
85 Low density Polyethlene pipes 102
86 High density Polyethlene pipes 102
87 Un Plasticised PVC pipes 103
88 Polyethelene water storage tank 273, 103
89 Gunmetal wheel value 103
90 Gunmetal pillar cocks 104
91 Polyethelene Aluminium Polyethelene composite presure pipes 104
92 Burnt stone slab 110
93 Granite slab 110
94 Cable stone heavy duty 110
95 Tandur blue stone 112
96 Shanabad slabs 112
97 Cudapha slabs 112
98 Mossic flooring 113
99 Mossiac tiles 113
100 Ceramic tiles 115
101 Marble slabs 115
102 Dode skirting 116
103 Glazed virtified tiles 116
104 Pattern flooring for staircase 117
105 Sadarahalli slab 118
106 Colour glazed ceramic tiles 119
107 Flush pointing stone slab 122
108 Plastering 122-124
109 Plastering for ceiling 123
110 White washing 124
111 Colouring/painting 125 to 128
112 Polishing 129
113 Recast mossaic tiles 132
INDEX
ROADS
1 EWE drains & similar works 152
2 Excavation for Road Formation 152
3 Excavation by using Mechanical means 152
4 Excavation of mercy soil 154
5 Removal unserviceable soil with disposal 154
6 Excavation for structure 154
7 Stipping & storing of top soil 155
8 Turffing 156
9 Earth work on Hill road 157
10 Scarifying & dressing 159
11 Embankment with Gravel 159
12 Compaction 160
13 Harticulture 161-164
14 GSB 167
15 GSB with coarse graded material 168
16 Inverted choke 169
17 WBM 169
18 WMM 170
19 Construction of Foot path/separator 171
20 Cleaning existing Road surface 175
INDEX
BRIDGE :
1 Board/Cast in situ. RCC piles 205
2 Pile cap 206
3 Levelling coarse for pipe cap 208
4 TMT Steel/MS Steel 208/233/246
5 Temp, Island 210
INDEX
6 MS Steel 210
7 PCC & RCC 210-215
8 Sinking of well/Sandy soil 215-219
9 #NAME? 219-221
10 RCC for well curb 221
11 Dowel bars 222
12 EWE in ordinary soil 224
13 EWE Hard soil 224
14 EWE in Mercy soil 225
15 Filling Foundation 225
16 Back filling 225
17 PCC/RCC 226-228
18 Brick masonry slub structure 230
19 Sand masonry -do- 230
20 Weep Holes 233
21 Filter media 233
22 Bearings 233
23 Solid slab super structure 236
24 T-beam & slabs 236-238
25 Box Girder & Balanced cantilever 239-240
26 Launching of Girders precast 243-244
27 Cast in situ box Girder/Segmental constn. & Balance cantilever 245
28 High tensile wires 246
29 River training/protection works/CC blocks/Pitching/curtain wall 248-249
30 Expansion joint / Asphalt plug joint 251-252
31 Wearing coat Mastic asphalt 255
32 Railing/Drawings spouts 255
33 Approch slab 255
34 Pre cast pre tensioned Girders 256
35 Pantry 256
36 Repairs & Rehabilitation 258 to 260
37 Pipe culverts Np2/Np3/Np4 262 to 263
OTHER ITEMS :
1 For two tier/3 tier barricading 270
2 Chainlink fencing 270
3 Mangalore tiles 270
4 Fixing door/window/ventilator 270
INDEX
INNOVATIVE ITEMS :
1 Water proofing to concrete surface 277 - 283
2 For cracks in Roof top surfaces 285 - 286
3 RBI Grade - 81 289-295
4 Clay hollow bricks (Extruded) 296
5 Dry lean concrete (DLC) 297
6 White topping 297-299
7 Stone washing 309-312
8 Steel windows and ventilators 312-338
9 Furnishing work 322-338
10 False ceiling suspension system 323-324
11 Mineral fiber false ceiling 324
12 Stainless steel false ceiling 325
13 Court Hall Furniture 326-327
14 Fire Fighting work 340-364
Sl.No. Description Unit Rate
38.15.3.
With 3% inorganic Compound like RBI GRADE 81 by weight of coarse & Fine cum 3523-00
2
Aggregate Mix Material
38.15.3.
With 4% inorganic Compound like RBI GRADE 81 by weight of coarse & Fine cum 4469-00
3
Aggregate Mix Material
38.15.4.
With 2% inorganic Compound like RBI GRADE 81 by weight of Milled Material: cum 2677
1
38.15.4.
With 3% inorganic Compound like RBI GRADE 81 by weight of Milled Material: cum 3622
2
38.15.4.
With 4% inorganic Compound like RBI GRADE 81 by weight of Milled Material: cum 4568
3
38.15.4.
With 5% inorganic Compound like RBI GRADE 81 by weight of Milled Material: cum 5514
4
Providing and laying Geocells --
38.42.1 _do_ 100mm height Sqm 370
38.42.2 _do_ 150mm height Sqm 480
38.43 Providing, fabricating and fixing profiled poly erethane insulated roof Sqm 2250-00
38.44 uPVC Windows and Doors
38.44.1 Providing & fixing of glazed 2 Track-2 Panel Sliding Windows Sqm 6,400.00
38.44.2 Providing & fixing of glazed Openable Window Sqm 7,000.00
38.44.3 Providing & Fixed Louvered Ventilator Sqm 6,200.00
38.44.4 Providing & fixing of Top hung Ventilator Sqm 7,000.00
38.44.5 Providing & fixing of glazed 3 Track - 2 Panel Sliding Windown Sqm 7,500.00
38.44.6 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door Sqm 6,000.00
38.44.7 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door Sqm 7,000.00
Consultancy Services for Preparation of Land Plan Survery for State
KM 36,000-00
38.45 Highways
and Major District Roads
Providing and fixing STRAIGHT WORKSTATION
Size : 1200 mmW x 600mm D x 1200 mm ht -(Sharing - Edgebinding table
No 22,000.00
39.14.1 top):
Size : 1200 mmW x 540mm D x 1200 mm ht -(Sharing - Postformed table top): No 23,000.00
39.14.2
Non Sharing workstation 1C) Size : 1200 mmW x 600mm D x 1200 mm ht
No 23,000.00
39.14.3 (Non
Sharing-Edgebinding table t
Size : 1200 mmW x 5400mm D x 1200 mm ht (Non Sharing - Postformed table No 26,000.00
39.14.4
Sharing-Edgebinding table t
Sharing workstation 2A) Size : 1200 mmW x 600mm D x 1200 mm ht -(Sharing No 13,500.00
39.15.1
-Edgebinding table top) :
Size : 1200mmW x 540mm D x 1200 mm ht -(Sharing-Postformed table top): No 14,500.00
39.15.2
Rs. 14500-00/no
Non Sharing workshation 2C) Size : 1200 mmW x 600mm D x 1200 mm ht
No 13,000.00
39.15.3 (Non
Sharing-Edgebinding table t
Non Sharing workstation 2D) Size : 1200 mmW x 540mm D x 1200 mm ht
No 14,250.00
39.15.4 (Non
Sharing -Postformed table t
X Type 4 wings 3A) Size : 1500 mmW x 1200mmD x 1200 mmht : Rs 60000-
Unit 60,000.00
39.16.1 00/Unit
3B) Size : 1500
Sl.No. Description Unit Rate
39.16.2 X Type 4 wings 3B) Size : 1500 mmW x 1500mm D x 1200 mmht : Unit 80,000.00
39.16.3 T Type 2 wings 3C) Size : 1500 mmW x 1200 mm D x 1200 mm ht : Unit 38,000.00
Rs 38000-00 / Unit 3D) Size : 1500
39.16.4 T Type 2 wings 3D ) Size : 1500 mmW x 1500 mm D x 1200 mmht : Unit 48,000.00
39.16.5 C Type 2 wings 3C) Size : 1500 mmW x 1200mm D x 1200 mm ht Unit 44,000.00
39.16.6 C Type 2 wings Size : 3D) : 1500 mmW x 1500mm D x 1200 mmht Unit 55,000.00
39.16.7 L Type one wing 3C) Size : 1500 mmW x 1200mm D x 1200 mm ht : Unit 25,000.00
39.16.8 L Type on wing 3D) Size : 1500 mmW x 1500mm D x 1200 mm ht Unit 32,000.00
39.17.1 Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgbinding table top) No 14,600.00
Side Table : 900 mmW x
39.17.2 Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgbinding table top) No 16,500.00
Side Table : 900 mmW x
39.18.1 1200 mmW x 600mm D x 750 mm ht (Edgebinding table top) No 7,500.00
39.18.2 1500 mmW x 600mm D x 750 mm ht (Edgebinding table top) No 8,500.00
39.18.3 1500 mmW x 540mm D x 750 mm ht (Postformed table top) No 8,500.00
39.18.4 1500 mmW x 540mm D x 750 mm ht (Postformed table top) No 9,500.00
39.19.1 600 mm Dia x 750 mm Ht (4 seater) No 4,500.00
39.19.2 750 mm Dia x 750 mm Ht (4 seater) No 5,600.00
39.19.3 900 mm Dia x 750 mm Ht (4 seater) No 7,000.00