Professional Documents
Culture Documents
File List
1. 2000GSP_s1_r6.pdf
2. 2000GSP_s1_r6.docx
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approval Information
Person Action Date and Time
212058608_debra_a_baker Approved 05/02/2014 04:49:01 pm GMT
212058608_debra_a_baker Approved 05/09/2014 02:15:24 pm GMT
considered an uncontrolled copy. Individuals with uncontrolled copies are responsible for ensuring
use of the current version. The latest version of this document and electronic approvals are kept in
MyWorkshop.
This document helps to establish criteria for the design, distribution and/or manufacture of General
See the GEHC Myworkshop System to determine the status of this document.
Electric Healthcare (GEHC) products. When this document is referenced, this new revision of the
document is applicable to any new Purchase Order (P.O.) issued 90 days after the final release of
this document. Exception: It is not applicable to P.O.s for existing designs unless called for by
specific revision number on the drawing or P.O. When used in new design work it should apply
within 90 days of final release of this document. During this time-period, either version can be used.
The RDO for this document is Standards for America’s Mechanical Components (STM).
The owner of this document is the Global Technologies, Engineering Standards Specialist.
Please refer to DOC0818049 in MyWorkshop for periodic review dates and status.
Periodic Review Required? Yes
QA/RA Review Required? No
Supplier(s) Affected? Yes
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
1.0 Purpose
This document defines the geometry, material, and finish requirements for flat washers that are commonly used by
design engineers in General Electric Healthcare (GEHC) brand products. This document defines the following attributes
pertaining to a flat washer:
Standard for which the flat washer is manufactured (ex. ISO, DIN, JIS, etc.)
External finish
GEHC Restriction of Hazardous Substances (RoHS) requirements for the given fasteners
This document also describes the part naming scheme to be used when creating or referencing this series of washers
on GEHC Bills of Materials. For further detail on this part naming scheme, creation and release of parts in MyWorkshop,
and Essential Classification, please reference GEHC document DOC0422574, “GEHC Metric Fastener Naming Scheme
(RoHS Compliant).”
Term Definition
ASTM American Society for Testing and Materials
Bill of Material A term to describe the parts list needed to complete a higher level assembly
Deutsches Institut für Normung, German Institute for Standardization. DIN ISO # is used for
DIN the German edition of ISO Standards. DIN EN ISO # is used if the Standard has also been
adopted as a European Standard.
See the GEHC Myworkshop System to determine the status of this document.
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
ISO 4526 Metallic Coatings – Electroplated Coatings of Nickel for Edition 2 / 2004
Engineering Purposes
ISO 4527 Metallic Coatings – Autocatalytic (electroless) Nickel-phosphorus Edition 2 / 2003
Alloy Coatings – Specification and Test Methods
ISO 4759-3 Tolerances for Fasteners Part 3: Plain Washers for Bolts, Screws Edition 3 / 2000
and Nuts — Product Grades A and C
See the GEHC Myworkshop System to determine the status of this document.
ISO 7089 Flat Washer - Normal Series, ISO 7089 Product Grade A, GEHC Edition 2 / 2000
RoHS Compliant, Series Drawing
ISO 16048 Passivation of Corrosion-resistant Stainless Steel Fasteners Edition 1 / 2003
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
2000–M6–02
8.1 Fastener Series Code
8.3 Material/Property Class/Finish
See DOC0422574 Code
8.2 Washer Size* See Table 2 for (-) numbers
M2 M8
M2P5 (for M2.5) M10
M3 M12
M4 M14
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
M5 M16
M6
*See Table 1 for guidance on
washer sizes.
See the GEHC Myworkshop System to determine the status of this document.
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
detailed definitions and Industry Standard specifications for each unique material and property class referenced in the
above table. All materials listed in the table shall be GEHC RoHS compliant. See Section 9 of this document for
requirements on restricted substances.
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
Passivation is recommended but not a strict requirement when these fasteners are made of stainless steel. Passivation
is often done as part of the normal manufacturing process to clean and descale the fastener surface after forming.
Stainless steel parts shall be cleaned, descaled and/or passivated per ASTM A380 or equivalent, such as ASTM A967 or
ISO 16048.
Nickel plating finish on phosphor bronze may be per ISO 4526, ISO 4527, or equivalent.
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR
________________________________________END OF DOCUMENT___________________________________________
1 “Nominal thread size” defined in IS0 262, “ISO General-purpose Metric Screw Threads – Selected Sizes for Screws, Bolts, and Nuts.”
Title
GE Proprietary
Flat Washer - Normal Series, ISO 7089 Product
Grade A, GEHC RoHS Compliant, Series Drawing Essential Classification: MINOR