Professional Documents
Culture Documents
OFFICE LOCATIONS
TOWNSEND GENERAL OFFICE
Physical Location:
Townsend International BOP’s, Inc.
5381 West 42nd Street
Odessa, Texas 79764
Mailing Addres:
Townsend International BOP’s
P.O. Box 14170
Odessa, Texas U.S.A. 79768-4170
QUALITY STATEMENT
TOWNSEND has expanded it’s product line to include a variety of ram type
preventers and two style of annulars. TOWNSEND has also expanded it’s
product line to include replacement ram rubbers, blocks and parts to fit
KEN BURNS – President - CEO other brands of preventers. We have upgraded most of our machinery
to include newer style CNC equipment to improve production and
quality. We are also contemplating building a new facility in the near
future. New styles and sizes of preventers are on the drawing board and
should be introduced in the coming months. TOWNSEND has also
expanded to include a repair center in Odessa, Texas. Established
partnerships on repair centers in Oklahoma City, Oklahoma and
Houston, Texas and authorized repair facilities throughout Alberta,
Canada. We are also looking for other repair facility locations in
different parts of the world to help better serve our customers.
The Townsend family feel that once you have ordered from another
manufacturer and then from TOWNSEND, you will realize how
professional, experienced, and knowledgeable TOWNSEND’S team really
is. The Townsend Family takes pride in its slogan – "The BOP People",
and hope you will come to the same conclusion when you have used our
products. For more information on TOWNSEND INTERNATIONAL BOP’S, INC.
contact us at 1-432-381-8750 or contact us via our Web page at http://
www.townsendbops.com.
REVISED 2-14-08
5381 W. 42ND STREET • P.O. BOX 14170
ODESSA, TX 79768
OFFICE 432/381-8750 • FAX 432/381-6324
----------------------------------------------------------------------------------------------------------------------------------------------------
TYPE 81-84 ANNURAM
• The Type 81-84 Annuram BOP is comparable to attaching a Hydril GK style
Annular BOP on top of a single or double Shaffer Sentinel BOP or WSI style
single or double BOP.
• The Type 81-84 Annuram BOP is available in 7-1/16 X 3M, 7-1/16 X 5M,
9 X 3M and 9 X 5M pressure ratings.
• Note: 7-1/16 X 5M Type 84 Annuram Annular requires specifc Unit & Seal Kit.
-------------------------------------------------------------------------------------------------------------------------------------
TYPE 82 RAM PREVENTER
• The Type 82 Ram BOP is comparable with Shaffer's LWS preventer.
• The Type 82 Hydraulic Preventer is available in 7-1/16 X 3M, 7-1/16 X 5M,
11 X 3M, 11 X 5M, 13-5/8 X 3 M and 13-5/8 X 5M pressure ratings.
• Available in Single, Double and Triple Configurations.
• The Type 82 Ram Bop accepts Shaffer Type 70 Ram Blocks
• Ram Blocks are available in the following sizes:
7-1/16" Type 61 Rams - CSO (Blind) to 5-1/2" - 1.660 to 3-1/2" Offset
11" Type 70 Rams - CSO (Blind) to 8-5/8" - 2-3/8" to 3-1/2" Offset
13-5/8" Type 70 Rams - CSO (Blind) to 10-3/4"
• 11" & 13-5/8" Rams are also availabe in VBR (Varriable Bore)
2-3/8" to 3-1/2" & 4" to 5-1/2"
---------------------------------------------------------------------------------------------------------------------------------------
---
TYPE 82-
• The Type 82-90 Annuram BOP is comparable to attaching a Shaffer Annular
90
on top of a Shaffer style LWS ram type BOP.
• The Type 82-90 Annuram BOP is available in 7-1/16 X 5M and 9 X 3M
configurations.
ANNURAM
----------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------
TYPE
88-84 • The Type 88-84 Annuram BOP is comparable to placing a Hydril GK Annular
on top of a Shaffer LWP preventer.
• The Type 88-84 Annuram BOP is available in 9 X 3M pressure rating only.
• The Type 88-84 Bop is available in single or double ram configurations.
• Note: 7-1/16 X 5M "Shorty" Type 84 Annuram Annular requires specific
Packing Unit and Seal Kit.
ANNURAM
• The Type 99 Ram Type Preventer is comparable with Shaffer's Chasovoy BOP.
• The Type 99 Preventer is only available in Hydraulic.
• The Type 99 is available in Double configuration.
• Type 99 Ram Blocks are available in the following sizes:
CSO (Blind) to 5-1/2" - 1.660 to 2-7/8"
• Note: Townsend Type 99 does not have the reversable bonnets found
in Shaffer's Chasovoy BOP (Shaffer's Chasavoy style Bop is pattented)
----------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------
BISON ACCUMULATORS
----------------------------------------------------------------------------------------------------------------------------------------------------
Notice: Townsend International Bops Inc., is not affiliated with Cameron, Shaffer, Hydril, Stewart & Stevenson or
Koomey. Cameron Type U, Shaffer LWP, LWS, Chasavoy, Sentinel, Hydril GK, WSI, Cad, Stewart &
Stevenson and Koomey are trademarks of the above mentioned companies and reference to this equipment
is intended for reader's reference only. Townsend does not intend to give the reader the impression that it
manufactures any equipment for any of the above companies. Townsend and it's logos and literature are
also protected by trademarks and copyright laws.
PRICES: Blowout Preventers, Accumulators, Spare Parts or Services shall be as stated in the Proposal or Acknowledgment, or if there is
no Proposal or Acknowledgement, as otherwise agreed to in writing by TOWNSEND. All price quotations are Ex-works TOWNSEND's
factory or distribution point or as agreed per quote and are subject to change without notice. All sales, use, import, excise or like taxes,
whether foreign or domestic, shall be charged to or borne by Buyer. TOWNSEND bears no responsibility for any consular fees for
legalizing invoices, certificates, certificates of origin, stamping bills of ladings, or other charges required by the laws of any country of
destination, or any fines imposed due to incorrect declarations. Charges will be added for factory preparation and packaging for shipment.
Minimum freight and invoice charges apply, as in effect at the time of order. If by any reason of any act of government, the cost to
TOWNSEND of performing it's obligations hereunder is increased, such increase shall be added to the quoted price.
PAYMENT TERMS: Unless alternate payment terms are specified or approved by TOWNSEND'"s Credit Department, all charges,
including applicable packing and transportation cost, billed by TOWNSEND are payable within NET 30 DAYS OF DATE OF
INVOICE. TOWNSEND reserves the right to modify or withdraw credit terms at any time without notice. Unless otherwise specified all
payments are due in the currency specified in TOWNSEND's Proposal, Acknowledgment and/or Invoice. Interest shall be due from
Buyer to TOWNSEND on over due accounts at the maximum rate allowed by law. When partial shipments are made, the goods will be
invoiced as shipped and each month's invoice will be treated as a separate account and be payable accordingly. Payment for goods is due
whether or not technical documentation and/or any third party certifications are complete at the time of shipment. TOWNSEND shall be
entitled to recover all reasonable attorney's fees and other costs incurred in the collection of overdue accounts. TOWNSEND reserves the
right where genuine doubts arise as to Buyer's financial position or if Buyer is in default of any payment, to suspend delivery or
performance of any order or any part thereof without liability or without prejudice to and without limitation of any other remedy until
Buyer cures the default and payment or satisfactory security for payment has been provided. TOWNSEND shall have the option to extend
the delivery date by a time at least equal to the period of suspension.
DELIVERY: Where goods are to be supplied from stock, such supply is subject to availability of stocks at the date of delivery. Partial
shipments may be made as agreed by Buyer and Seller. Stated delivery dates are approximate only and cannot be guaranteed.
TOWNSEND shall have no liability for damages arising out of the failure to keep a projected delivery date, irrespective of the length of
the delay. In the event Buyer is unable to accept delivery fo goods when tendered, TOWNSEND may, at it's option, arrange storage of the
goods and Buyer shall be liable to TOWNSEND for the reasonable cost of such storage. This provision is without prejudice to any other
rights, which TOWNSEND may have with respect to Buyer's failure to take delivery of goods, which includes the right to invoice Buyer
for the goods. Buyer agrees that title of the goods will transfer to Buyer upon invoicing notwithstanding Buyer's inability to accept
delivery and that Buyer assumes all risk of loss or damage to the goods from the date title passes to Buyer. Delivery of goods shall be
F.O.B. Sellers plant in Odessa, Texas except as otherwise agreed. Every effort shall be made to meet promised delivery date; but, in no
event, shall Seller be liable for consequential damages, claims or rental of substitute equipment arising from delay in delivery. Seller is
expressly relieved of liability for failure or delay in delivery due to Acts of God, governmental priorities, labor or material shortages
beyond its control or machinery failure and is given such additional time as is reasonably necessary to complete its obligation under this
agreement.
DELIVERY DATE CONTINGENCIES: Commitment dates for shipping are based upon timely receipt of Purchaser's order with all
necessary descriptive data and presumes necessary lead time for production scheduling, manufacturing and testing. Purchaser's change in
specifications or requirements may affect delivery time and additional cost will be for Purchaser's account. Purchaser shall not change or
modify specifications of the quotation except by agreement with Seller. Purchaser accepts cost increases due to modification of original
order.
Townsend International BOP’s, Inc. Phone (432) 381-8750 Fax 432- 381-6324
DIVISION OF KB2 INDUSTRIES, INC.
CANCELLATION: Orders placed by Buyer and accepted by TOWNSEND may be canceled only with the written consent of
TOWNSEND and will be subject to cancellation charges. In accepting an order TOWNSEND orders raw materials and castings from it's
vendors. Once raw material and castings have been received by TOWNSEND, Buyer is obligated to reimburse TOWNSEND for it's
expenses including labors, freight and material cost. No orders may be canceled subsequent to shipment. As estimated actual damages,
Buyer agrees to pay TOWNSEND the greater of TOWNSEND'S actual cost incurred prior to cancellation plus a reasonable profit, or the
following minimum cancellation charges: (a.) 20% of order value if canceled 30 or more days prior to the original shipment date; (b.) 50%
of the order value if canceled thereafter, or (c.) 100% of the value of any non-standard items, which are items not built from stock or built
to customers specifications. Buyer shall verify the amount of the cancellation charges prior to canceling an order. TOWNSEND has the
right to determine which cancellation charge will apply.
TITLE AND RISK OF LOSS: Ownership and risk of loss pass to the Buyer upon the earlier of (i) TOWNSEND'S delivery of goods to
the carrier, or (ii) invoicing by TOWNSEND for the goods where Buyer is unable to accept delivery on the scheduled date. TOWNSEND
retains a SECURITY INTEREST in the goods until the full purchase price has been paid, and Buyer agrees to perform upon
request all acts required to secure TOWNSEND'S interest. TOWNSEND accepts no responsibility for any damage, shortages or
loss in transit. TOWNSEND will attempt to pack or prepare all shipments so that they will not break, rust or deteriorate in shipment, but
does not guarantee against such damage. Claims for any damages, shortage or loss in transit must be made by Buyer on the carrier.
LIMITED WARRANTY: In the case of the purchase of "NEW" Blowout Preventers, Accumulators and Equipment and solely for
the benefit of the original Buyer, TOWNSEND warrants, for a period of 12 months from shipment that Equipment of it's own manufacture
shall conform to the material and technical specifications set forth in the relevant scope of work document as agreed to in writing by
TOWNSEND and Buyer. If the equipment fails to conform with such specifications upon inspection by TOWNSEND, TOWNSEND at
its option and as Buyers sole remedy, will either repair or replace such defective Equipment with the type originally furnished. Under no
circumstances will TOWNSEND be liable for unauthorized services performed on equipment by another vendor without
TOWNSEND'S first written approval. "RECONDITIONED EQUIPMENT" TOWNSEND warrants to Buyer, that for a period of 30
days from the date of shipment to Buyer, equipment will be free from defects in material and workmanship performed by TOWNSEND
prior to sale. Buyer should be aware that Used Equipment is used and carries only the warranty of the original equipment manufacturer.
TOWNSEND purchases and re-sales Used Equipment with no specified warranty as to the condition of the equipment prior to sale other
than TOWNSEND sells Equipment "AS IS" or "RECONDITIONED" to TOWNSEND'S best ability and only guarantees the equipment to
test before it leaves TOWNSEND'S facility, unless otherwise specified to Buyer in writing prior to sale. TOWNSEND, under no
circumstances will be liable for any repairs performed on equipment by the Buyer or another vendor without first prior written
consent by TOWNSEND. Under no circumstances will TOWNSEND'S obligation for services being performed exceed the
original profit received by TOWNSEND on the purchase price of the used equipment. "SERVICE" TOWNSEND warrants that the
Services to be provided pursuant to this Agreement shall conform to the material aspects of the specifications set forth in the relevant
scope of work document as agreed to in writing by TOWNSEND and Buyer. TOWNSEND shall re-perform that part of the non-
conforming Services, provided TOWNSEND is notified by Buyer prior to TOWNSEND'S departure from the work site. TOWNSEND'S
warranty obligations hereunder shall not apply if the non-conformity was caused by (a.) Buyer's failure to properly store or maintain the
Equipment or Parts; (b.) unauthorized modifications, repair or service of the Equipment or Parts by Buyer or other vendor, (c.)
utilization of replacement parts not manufactured by TOWNSEND; or (d.) use or handling of the Equipment or Parts by Buyer in a
manner inconsistent with TOWNSEND'S recommendations. Further, TOWNSEND'S warranty obligations under this obligation shall
terminate if (a.) Buyer fails to perform it's obligations under this or any other Agreement between the parties, or (b.) if Buyer fails to pay
any charges due to TOWNSEND. Any third party warranties provided on Equipment or Parts not manufactured by TOWNSEND are
assigned to Buyer, without recourse, at the time of delivery, provided such warranties are assignable.
THIS ARTICLE SETS FORTH BUYER'S SOLE REMEDY AND TOWNSEND'S ONLY OBLIGATION WITH REGARD TO
NON-CONFORMING EQUIPMENT, PARTS OR SERVICES, EXCEPT AS OTHERWISE EXPRESSLY PROVIDED
PURSUANT TO THE PROVISIONS OF THIS ARTICLE. TOWNSEND MAKES NO OTHER WARRANTIES OR
REPRESENTATIONS OF ANY KIND. EXPRESS OR IMPLIED, AND TOWNSEND DISCLAIMS THE IMPLIED
WARRANTIES OR MECHANTIBILITY ANDFor FITNESS FOR and
inquiries A PARTICULAR
a completePURPOSE.
listing THE LIABILITY OF
TOWNSEND FOR ANY LOSS OR DAMAGE IN ANYWAY RESULTING TO BUYER OR ANY OTHER PERSON FROM ANY
of Blowout Preventers and
FAILURE OF A EQUIPMENT, PARTS OR SERVICES TO CONFORM TO ORDER OR SPECIFICATIONS, OR ANY
Accumulators,
ACCOUNT BREACH OF WARRANTY, OR NEGLIGENCE OR visit our website
FAILURE at
TO CONFORM TO ANY STANDARD OR CARE
http://www.townsendbops.com
IN ANYTHING DONE OR OMITTED BY TOWNSEND, ANY EMPLOYEE OR AGENT, SHALL NOT, IN ANY EVENT,
EXCEED THE AMOUNT WHICH TOWNSEND RECEIVED FROM BUYER FOR THE SPECIFIC PRODUCT FOR THE
Townsend International BOP’s, Inc. Phone (432) 381-8750 Fax 432- 381-6324
DIVISION OF KB2 INDUSTRIES, INC.
CHANGES: TOWNSEND expressly reserves the right to change, discontinue or modify the design and manufacture of it's products
without obligation to furnish, retrofit or install goods previously or subsequently sold.
RETURN OF MADE TO STOCK GOODS: Upon TOWNSEND'S written approval, unused incorrectly shipped or "MADE TO
STOCK" goods ordered incorrectly, in new condition and of current manufacture and catalog specifications may be returned by Buyer for
credit (subject to a restocking fee), provided written request is received within 30 days after purchase date. Non-standard goods are not
returnable for credit. Request for return of goods mush show original purchase order number, invoice number, description of material,
and date of purchase. Return goods does not relieve Buyer of the obligation to make payment against TOWNSEND'S invoice, and any
credit or refund allowed will be issued following TOWNSEND'S receipt of the goods, prepaid. The credit allowed on returned goods, if
any, is a merchandise credit and is applicable only against further purchases of TOWNSEND goods. The credit given will be solely in
TOWNSEND'S discretion and may be passed on the original or a subsequently adjusted price; a charge will be made to clean-up, refinish
and restock. No rubber products or components may be returned for credit after 60 days from the date of shipment unless previously
agreed to in writing by TOWNSEND.
LIABILITIES, RELEASES AND INDEMNIFICATION: For purpose of this article, the following definitions shall apply: (1)
"TOWNSEND GROUP" shall mean (I.) TOWNSEND, its parent, subsidiary or related companies, (ii.) its or their working interest
owners, co-lessees, co-owners, partners, joint ventures, if any, and their respective parents, subsidiary or related companies and (iii.) the
officers, directors, employees, consultants, agents and invitees of all of the foregoing. (2) "buyer Group" shall mean (I.) Buyers, its
parent, subsidiary or related companies, (ii.) its and their working interest owners, co-lessees, co-owners, partners, joint ventures, if any,
and their respective parents, subsidiary or related companies and (iii.) the officers, directors, employees, consultants , agents and invitees
of all of the foregoing. (3) "claims shall mean all claims, demands, causes of action, liabilities, damages, judgments, fines, penalties,
awards, losses, costs, expenses (including, without limitation, attorneys' fees and costs of litigation) of any kind or character arising out of,
or related to, the performance of or subject matter of this Agreement (including, without limitation, property loss or damage, personal or
bodily injury, sickness, disease or death, loss of services and/or wages, or loss of consortium or society.)
(a.) TOWNSEND shall release, indemnify, defend and hold Buyer Group harmless from and against any and all Claims in respect of
personal or bodily injury to, sickness, disease or death of any member of TOWNSEND GROUP or TOWNSEND'S Group subcontractors
or their employees, agents or invitees, and all claims in respect of damage to or loss or destruction of property owned, leased, rented or
hired by any member of TOWNSEND Group or TOWNSEND Group's subcontractors or their employees, agents or invitees.
(b.) Buyer shall release, indemnify, defend and hold TOWNSEND Group harmless from and against any and all Claims in respect
of personal or bodily injury to, sickness, disease or death of any member of Buyer Group or Buyer's Group's other contractors or
their employees, agents or invitees, and all Claims in respect to or loss or destruction of property owned, leased, rented or hired
by any member of Buyer's Group or Buyers Group's other contractors or their employees, agents or invitees. (c.) In the event this
Agreement is subject to the indemnity limitations in Chapter d127 of the Texas Civil Practices and Remedies Code (or any successor
statute), and so long as such limitations are in force, each party covenants and agrees to support the mutual indemnity obligations
contained in Paragraphs a and b above, by carrying equal amounts of insurance (or qualified self insurance) in an amount no ness than
$1,000,000.00 U.S. (d.) Notwithstanding anything contained in this Agreement to the contrary, in all instances where TOWNSEND is
providing Services at a well site, Buyer, to the maximum extent permitted under applicable law, shall release, indemnify, defend and hold
TOWNSEND Group and TOWNSEND Group subcontractors harmless from and against any and all Claims asserted by or in favor of any
person or party, including TOWNSEND Group, Buyer Group or any other person or party, resulting from: (i.) loss or damage to any well
or hole (including but not limited to the costs of re-drill), (ii.) blowout, fire, explosion, cratering or any uncontrolled well condition
(including but not limited to the cost to control a wild well and the removal of debris), (iii.) damage to any reservoir, geological formation
or underground strata or the loss of oil, water or gas therefrom, (iv.) pollution or contamination of any kind (other than surface spillage of
fuels, lubricants, rig sewage or garbage, to the extent attributable to the negligence of TOWNSEND Group, including but not limited to
the cost of control, removal and clean-up, or (vi) damages to , or escape of any substances from, any pipeline, vessel or storage facility.
(e.) Notwithstanding anything contained in this Agreement to the contrary, neither party shall be liable to the other and each party releases
the other for any indirect, special, punitive, exemplary or consequential damages or losses (whether foreseeable at the date of this
Agreement, including without limitation, damages for lost production, lost revenue, lost product, lost profit, lost business or business
opportunities. (f.) Notwithstanding anything contained in this Agreement to the contrary, TOWNSEND'S total liability for all claims,
damages, causes of action, demands, judgments, fines, penalties, awards, losses, costs and expenses (including attorney's fees and cost of
litigation) shall be limited to and shall not exceed the value of the Products or Services Purchased. (g.) THE EXCLUSION OF
LIABILITY, RELEASES AND INDEMNITIES SET FORTH IN PARAGRAPH A, THROUGH F, OF THIS ARTICLE SHALL APPLY
TO ANY CLAIM(S), LOSSES OR DAMAGES WITHOUT REGARD TO THE CAUSE(S) THEREOF, INCLUDING, BUT NOT
LIMITED TO PRE-EXISTING CONDITIONS, WHETHER SUCH CONDITIONS BE PATENT OR LATENT, THE IMPERFECTION
OF MATERIAL, DEFECT OR FAILURE OF PRODUCTS For inquiriesOR EQUIPMENT, BREACHlisting
and a complete OF REPRESENTATION OR WARRANTY
(EXPRESSED OR IMPLIED), ULTRA-HAZARDOUS ACTIVITIES, STRICT
of Blowout Preventers and LIABILITY, TORT, BREACH OF CONTRACT,
BREACH OF DUTY (STATUTORY OR OTHERWISE), BREACH OF ANY SAFETY REQUIREMENT OR REGULATION, OR THE
NEGLIGENCE OR OTHER LEGAL FAULT OR Accumulators, RESPONSIBILITYvisit OF ANY ourPERSON
website(INCLUDING
at THE INDEMNIFIED OR
http://www.townsendbops.com
RELEASED PARTY), WHETHER SUCH NEGLIGENCE BE SOLE, JOINT OR CONCURRENT, ACTIVE OR PASSIVE, (h.) Redress
under the indemnity provisions set forth in this Article shall be the exclusive remedy(ies) available to the parties hereto for the matter,
Townsend International BOP’s, Inc. Phone (432) 381-8750 Fax 432- 381-6324
DIVISION OF KB2 INDUSTRIES, INC.
INSURANCE: Upon written request, each party shall furnish the the other party certificates of insurance evidencing the fact that the
adequate insurance to support each party's obligations hereunder has been secured. To the extend of each party's release and indemnity
obligations expressly assumed by each party hereunder, each party agrees that all such insurance policies hall (a.) be primary to the other
party's insurance; (b.) include the other party, its parent, subsidiary and affiliated or related companies, and its and their respective
officers, directors, employees, consultants, and agents as additional insured; and (c.) be endorsed to waive subrogation against the other
party, its parent subsidiary and affiliated or related companies, and its and their respective officers, directors, employees, consultants and
agents.
GOVERNING LAW: A. Except for Equipment, Parts and Services provided, or to the provided, by TOWNSEND in North or South
America (the America's), this Agreement shall be governed by and interpreted in accordance with English law, excluding conflicts and
choice of law principals. B. For Equipment Parts and Services provided, or to be provided, by TOWNSEND in the America's, this
Agreement shall be governed by and interpreted in accordance with the substantive laws of Texas, excluding conflicts and choice of law
principles. Venue for any dispute or conflict shall be solely in Ector County, Texas, U.S.A. ENFORCEMENT: Any action pertaining
to this agreement or to the goods delivered thereunder must be brought in the courts of the State of Texas, County of Ector, and Customer
further consents to the jurisdiction of the courts of the State of Texas, County of Ector, relating to any such action.
REGULATORY COMPLIANCE: By acceptance of delivery of this order, Buyer warrants it has complied with all applicable
governmental, statutory and regulatory requirements and will furnish TOWNSEND with such documents as may be required.
TOWNSEND warrants and certifies that in the performance of this contract, it will comply with all applicable statutes, rules, regulations
and orders of the United States and of any state or political subdivision thereof, including laws and regulations pertaining to labor, wages,
hours and conditions of employment, applicable price ceilings if any, and that the articles delivered hereunder shall be in compliance with
the Fair Labor Standards Acts and the Equal Employment Opportunity provisions of pertinent Executive Orders and the regulations
adopted thereunder. Further, Buyer acknowledges that all equipment, parts, materials, and products under these terms and conditions are
being quoted accordingly to regulations issued by the United States Export Administration Department. United States Law prohibits the
sale, re-sale, export or re-export of equipment, parts, materials or products to trade sanctioned countries.
CONFIDENTIAL INFORMATION: Each party recognizes and acknowledges that it shall maintain all data, information, disclosures,
documents, drawings, specifications, patterns, calculations, technical information and other documents (collectively, "Confidential
Information) obtained from the other in strict confidence subject only to disclosure required by law or legal process. In the event that
TOWNSEND owns copyrights to patents to, or has filed patent applications on, any technology related to the Equipment, Services or
Parts furnished by TOWNSEND hereunder, and if TOWNSEND makes any improvements on such technology, then such improvements
shall not fall within the confidentiality obligation included herein, and TOWNSEND shall own all such improvements including
drawings, specifications, patterns, calculations, technical information and other documents. However, nothing herein above contained
shall deprive the Receiving Party of the right to use or disclose any information: (a.) which is, at the time of disclosure, known to the trade
or public; or (b.) which becomes at a later date known to the trade or the public through no fault of the Receiving Party and ten only after
said later date; or (c.) which is proposed by the Receiving Party . As evidenced by the Receiving Parties written records, before receipt
thereof from the Disclosing Party, or (d.) which is disclosed to the Receiving Party in good faith by a third party who has an independent
right to such information; (e.) which is developed by the Receiving Party as evidence by documentation, independently of the
Confidential Information, or (f.) which is required to he disclosed by the Receiving Party pursuant to an order of a court of competent
jurisdiction or other governmental agency having the power to order such disclosure, provided that the Receiving Party uses its best
efforts to provide timely notice to the Disclosing party of such order to permit the Disclosing Party an opportunity to contest such order.
INDEPENDENT CONTRACTOR: It is expressly understood that TOWNSEND is an independent contractor, and that neither
TOWNSEND nor its principle, partners, employees or subcontractors are servants, agents or employees of the Buyer.
POINT OF SALE: Customer agrees, as a condition of purchase, all points of sale will be base on origin of Original Invoice and not
Delivery Ticket. Point of Sale will be Odessa, Ector County, Texas.
GENERAL: Failure of Buyer or TOWNSEND to enforce any of the terms and conditions of this Agreement shall not prevent a
subsequent enforcement of such terms and conditions or be deemed a waiver of any subsequent breach. Should any provision of this
Agreement, or portion thereof, he unenforceable or in conflict with governing country, state, province, or local laws, then the validity of
the remaining provisions, and portions, and portions thereof, shall not be affected by such un-enforceability or conflict, and this
Agreement shall be construed as if such provisions supersedes all prior written agreements or representations. Buyer acknowledges that it
has not relied on any representations other than those contained in this Agreement. This Agreement shall not be varied, supplemented,
qualified, or interpreted by any prior course of dealing between the parties or by any usage of trade and may only be amended by an
agreement executed by an authorized representative of each party.
ENTIRE AGREEMENT: Except for the Terms and Conditions contained in Seller's current price list and/or price book and website,
this is the entire agreement of the parties relating to the subject matter hereof, and may not be amended except in writing signed by an
officer of Townsend International BOPs, Inc.
5381 W. 42ND STREET • P.O. BOX 14170
ODESSA, TX 79768
OFFICE 915/381-8750 • FAX 915/381-6324
As you can see in our catalog, TOWNSEND has developed an impressive line of
Blowout Preventers, and replacement parts for other Manufacturers' styles of
preventers. We have recently expanded our product line to include additional drilling
and well service components.
TOWNSEND has confronted many competitors over the past 30 years; however, no
other manufacturer offers such an extensive line of a product and preventers as
TOWNSEND INTERNATIONAL BOPS. The TOWNSEND family have dedicated ourselves
to providing a superior product at a competitive price. Our Manufacturing Department,
whose mission is to provide products that are accurate, uses only high quality raw
materials and rubber compounds. Each metal part is plated with the correct plating
which increases cost and reduces profitability; this guarantees that each TOWNSEND
product is accurate to the smallest detail. We pride ourselves in being compared to the
other OEM Blowout Preventer manufacturers when it comes to Quality, Reliability and
Workmanship.
In today's marketplace, you can always buy cheaper, but not better. TOWNSEND
performs countless tests on its products before they are introduced into the
marketplace. All TOWNSEND products are backed by material certifications,
traceability records and TOWNSEND's own QUALITY GUARANTEE. (TOWNSEND has
also increased it's product liability insurance by three fold.) You, as a customer, are
purchasing a product that is not only backed by TOWNSEND'S QUALITY GUARANTEE,
but includes the added protection you receive from Product Liability Insurance.
TOWNSEND's best sales tool is its customers response to our products and our
commitment to the development of durable and long term relationships. Thank you for
your purchases and being part of the growing Townsend family.
Yours,
KEN BURNS
5381 W. 42ND STREET • P.O. BOX 14170
ODESSA, TX 79768
OFFICE 432/381-8750 • FAX 432/381-6324
TABLE OF CONTENTS
1-2 ………………….. TYPE 81 MANUAL OPERATED BOP
3-4 ………………….. TYPE 81 HYDRAULIC OPERATED BOP
5-6 ………………….. TYPE 82 HYDRAULIC RAM TYPE BOP - 7-1/16 X 5M & 11 X 3M
7-8 ………………….. TYPE 82 HYDRAULIC RAM TYPE BOP - 11 X 5M, 13-5/8 X 3M, 13-5/8 X 5M
9 - 10 ………………….. TYPE 88 HYDRAULIC RAM TYPE BOP
11 - 12 ………………….. TYPE 99 HYDRAULIC RAM TYPE BOP
13 - 14 ………………….. 7-1/16 x 3/5/10M “ST” RAM TYPE BOP
15 - 16 ………………….. 11 X 3/5M, 13-58 X 3/5M "ST" RAM TYPE BOP
17 - 18 ………………….. TYPE 81-84 ANNURAM BOP
19 - 20 ………………….. TYPE 82-90 ANNURAM BOP
21 - 22 ………………….. TYPE 84 ANNULAR BOP
23 - 24 ………………….. TYPE 90 ANNULAR BOP
25 - 27 ………………….. TYPE 81 RAM ASSEMBLIES
28 ………………….. TYPE 81 REDA-CABLE RAMS BLOCKS & RAM RUBBERS
29 - 30 ………………….. TYPE 88 RAM ASSEMBLIES
31 ………………….. TYPE 99 RAM ASSEMBLIES
32 ………………….. SHAFFER TYPE 39 & 48 RAM RUBBERS
33 ………………….. SHAFFER TYPE 39 & 48 RAM BLOCKS & CARRIERS
34 ………………….. SHAFFER TYPE 61 RAM RUBBERS
35 ………………….. SHAFFER TYPE 61 RAM BLOCKS & CARRIERS
36 ………………….. SHAFFER TYPE 64 RAM RUBBERS
37 ………………….. TYPE 82 & SHAFFER TYPE 70 & 75 RAM RUBBERS
38 ………………….. TYPE 82 & SHAFFER TYPE 70 RAM BLOCKS & CARRIERS
39 ………………….. SHAFFER TYPE 75 RAMS & CARRIERS
40 ………………….. "ST" & CAMERON TYPE U RAM RUBBERS
41 ………………….. "ST" & CAMERON TYPE U RAM BLOCKS
42 ………………….. "ST" & CAMERON TYPE U “VBR” VARIABLE BORE RAM RUBBERS
43 ………………….. "ST" & CAMERON TYPE U SHEAR RAM ASSEMBLIES
44 ………………….. TOWNSEND & SHAFFER RETRACTOR SCREWS
45 ………………….. TYPE 82 & SHAFFER HINGE BRACKET ASSEMBLIES
46 ………………….. "ST" & CAMERON METAL REPLACEMENT PARTS
47 - 48 ………………….. BONNET REBUILD KITS FOR RAM TYPE BOPS
49 - 50 ………………….. RAM TYPE DOOR SEALS
51 ………………….. TYPE 84 ANNULAR PACKING UNITS
52 ………………….. TYPE 84 SEAL KITS
53 ………………….. TYPE 90 ANNULAR PACKING UNITS
54 - 55 ………………….. ANUFLEX PACKING UNIT
56 ………………….. BISON ACCUMULATORS
57 ………………….. HIGH PRESSURE TEST PUMPS
58 - 59 ………………….. ACCUMULATOR REPLACEMENT PARTS
60 ………………….. RUBBER COATED RING GASKETS
61 - 62 ………………….. RING GASKETS
63 ………………….. BOLTS & NUTS
64 ………………….. SPOOLS – D.S.A.’S – FLANGES – TEE’S – CROSSES
65 ………………….. TYPE 81 DIMENSIONAL DATA
66 ………………….. TYPE 82 DIMENSIONAL DATA
67 ………………….. TYPE 88 DIMENSIONAL DATA
68 ………………….. TYPE 99 DIMENSIONAL DATA
69 ………………….. 7-1/16" X 3/5/10M TYPE “ST” DIMENSIONAL DATA
70 ………………….. 11" & 13-5/8" TYPE "ST" DIMENSIONAL DATA
71 ………………….. TYPE 81-84 ANNURAM DATA
72 ………………….. TYPE 82-90 ANNURAM DATA
73 ………………….. TYPE 84 ANNULAR DIMENSIONAL DATA
74 ………………….. TYPE 90 ANNULAR DIMENSIONAL DATA
75 - 82 ………………….. OTHER PRODUCTS AVAILABLE FROM TOWNSEND INTL
REVISED 6-23-08
5381 W. 42ND STREET • P.O. BOX 14170
ODESSA, TX 79768
OFFICE 432/381-8750 • FAX 432/381-6324
6A
36
23
REVISED 4-01-08
TI-02
REVISED 5-11-08
TI-03
43
42
REVISED 4-01-08
TI-04
REVISED 4-01-08
TI-05
20
REVISED 4-01-08
TI-06
REVISED 4-01-08
TI-07
16
Note: Item 16 & 17 - INNER & OUTER ADAPTER O-RINGS IN OLD STYLE TYPE 82 PREVENTERS ONLY.
Item 53 - RAM BLOCKS, RETRACTOR SCREWS AND CARRIERS REFERENCED PAGE 35.
REVISED 4-01-08
TI-08
REVISED 4-01-08
TI-09
A
11 B
11 A
11
11
REVISED 4-01-08
TI-10
REVISED 4-01-08
TI-11
34
33
32
35
28
29
30
31
3
4 27
12 38
5
25 24 13
15
6
26
16 21
7
20 19
5
10
4 9
8
9
16 37
13
11 15
12 14
17
18
REVISED 4-01-08
TI-12
NOTE:
7 RAM SHAFT SEAL ASSEMBLY CONSIST OF ITEMS MARKED WITH ASTERISK.
REVISED 4-01-08
TI-13
22
40
19 20
18
22
41
21
25 24
16
17
23
6
15 35
10
36 38
37
34 26
12
7 42
5 2
31
30
11 32
28 29
27
9
33
8
3
13
NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.
REVISED 4-01-08
TI-14
*25 2 4 OPERATING PISTON ROD TO INT. FLANGE ST-18492-92 ST-18492-92 ST-18492-92 ST-18492-92
*26 2 4 OPERATING PISTON SEAL ST-704774 ST-704774 ST-704774 ST-704774
*27 2 4 TAIL ROD SEAL ST-11741-32 ST-11741-32 ST-11741-32 ST-11741-32
*28 2 4 WIPING SEAL ST-6227-34-1-70 ST-6227-34-1-70 ST-6227-34-1-70 ST-6227-34-1-
*29 4 8 RAM CHANGE PISTON TO BODY SEAL ST-18491-73 ST-18491-73 ST-18491-73 ST-18491-73
*30 4 8 RAM CHG. PISTON ROD TO INT. FLANGE SEAL ST-6227-32-13-90 ST-6227-32-13-90 ST-6227-32-13-90 ST-6227-32-13-90
*31 4 8 RAM CHANGE CYLINDER TO INT. FLANGE SEAL ST-6227-41-13-90 ST-6227-41-13-90 ST-6227-41-13-90 ST-6227-41-13-90
*32 4 8 RAM CHANGE CYLINDER TO BONNET SEAL ST-6227-45-13-90 ST-6227-45-13-90 ST-6227-45-13-90 ST-6227-45-13-90
REVISED 4-01-08
TI-15
22
40
19 20
18
22
41
21
25 24
16
17
23
6
15 35
10
36 38
37
34 26
12
7 42
5 2
31
30
11 32
28 29
27
9
33
8
3
13
NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.
REVISED 4-01-08
TI-16
*25 2 4 OPERATING PISTON ROD TO INT. FLANGE ST-18492-91 ST-18492-91 ST-18492-90 ST-18492-90
*26 2 4 OPERATING PISTON SEAL ST-704773 ST-704773 ST-704772 ST-704772
*27 2 4 TAIL ROD SEAL ST-11741-33 ST-11741-33 ST-11741-34 ST-11741-34
*28 2 4 WIPING SEAL ST-6227-38-1-70 ST-6227-38-1-70 ST-6227-40-1-70 ST-6227-40-1-
*29 4 8 RAM CHANGE PISTON TO BODY SEAL ST-6227-29-13-90 ST-6227-29-13-90 ST-6227-31-13-90 ST-6227-31-13-90
*30 4 8 RAM CHG. PISTON ROD TO INT. FLANGE SEAL ST-6227-34-13-90 ST-6227-34-13-90 ST-6227-36-13-90 ST-6227-36-13-90
*31 4 8 RAM CHANGE CYLINDER TO INT. FLANGE SEAL ST-6227-44-13-90 ST-6227-44-13-90 ST-6227-49-13-90 ST-6227-49-13-90
*32 4 8 RAM CHANGE CYLINDER TO BONNET SEAL ST-6227-48-13-90 ST-6227-48-13-90 ST-6227-88-13-90 ST-6227-88-13-90
REVISED 4-01-08
TI-17
6
5
7
8
11
9
10
12
48
37
15
12
16
14
17 13
45
29
26 32
36 51 28
34 35
31 38 25
39
14 40 30
50 46
13
41 18
22 47 42
43
44
21 33
27
18
23 24
REVISED 4-01-08
TI-18
10 2 LOWER PISTON SEAL 63-15614 63-15614 36 2 RAM GUIDE PIN TH8126 TH8126
16 6 1/4" NPT PIPE PLUG TH816 TH816 43 2 PROTECTOR, M.OR. TH8133 TH8133
17 2 1/3" NPT WEEP PLUG TH817 TH717 44 2 LOCKING SHAFT TH8134 TH8134
18 12 3/4" X 9-3/8" HEX HEAD BOLT TH818 TH818 45 2 RAM SHAFT TH8135 TH8135
21 2 14" HAND WHEEL TH8111 TH8111 47 2 BONNET (LEFT OR RIGHT) TH8137 TH8137
23 2 1/4" X 1-4" S.S. SET SCREW TH8113 TH8113 51 1 RAM ASSEMBLY TYPE 81 TYPE 81
(SEE TYPE 81 RAM PAGE )
24 4 3/8" X 3/4" BOLT TH8114 TH8114
25 4 SEAL TH8115 TH8115
NOTE: TYPE 7-1/16 X 5M TYPE 84 "SHORTY"
ANNULAR REQUIRES SPECIAL SEAL KIT &
PACKING UNIT.
REVISED 4-01-08
TI-19
18
13
12
11
14
10
14
8 24 52 29
55
9
64
15 62 60
32
1
17
66 63
58
56
67 53 44
51 43
54 44
59
65
57
30
35
23 34
36 35
1 31 27
4
26
40 41
42 47
48 50
73
31
73
38
69 37
39
70
72 71
REVISED 4-01-08
TI-20
7 24 NYLON HEX NUT 20106 20106 47 2 PISTON LOCK NUT SEAL TH7135 TH7135
20 SET G-2 HEX NUT 300-703 300-705 61 1 MANIFOLD HINGE - CURVED TH7149 TH7149
NS 1 ADAPTER RING WEAR RING 152344 152344 62 8 HINGE MANIFOLD SEAL TH7150 TH7150
*** 1 ANNULAR SEAL KIT - OLD STYLE 155079 155079 63 2 HINGE PIN TH7151 TH7151
NEW STYLE - EXTRA LOWER SEAL 155079-A 155079-A
64 20 HINGE PIN SEAL TH7152 TH7152
22 1 RIGHT HAND DOOR TH7111 TH7111 65 2 HINGE PIN RETAINER TH7153 TH7153
23 1 LEFT HAND DOOR TH7112 TH7112 66 4 PIPE PLUG TH7154 TH7154
24 2 PIPE PLUGS TH7113 TH7113 67 4 GREASE FITTING TH7155 TH7155
25 2 DOOR SEAL TH7114 TH7114 68 4 BUSHING TH7156 TH7156
29 1 CYLINDER HEAD - RIGHT HAND TH7116 TH7117 71 1 CYLINDER HEAD WRENCH TH7158 TH7158
30 1 CYLINDER HEAD - LEFT HAND TH7118 TH7118 72 2 HAND WHEEL TH8111 TH8111
31 4 CYL. TO CYLINDER HEAD SEAL TH7119 TH7119 73 2 UNIVERSAL JOINT TH9982 TH9982
REVISED 4-01-08
TI-21
7 4
5
8
9
11
10
12
REVISED 4-01-08
TI-22
7 UPPER PISTON SEAL 2 63-31603 *63-31603 83-32870 103-31808 105-31403 123-30736 135-38151
10 LOWER PISTON SEAL 2 63-15614 *63-15614 83-32869 103-31604 105-32599 123-30735 135-38165
* NOTE: 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIFIC SEAL KIT AND PACKING UNIT.
REVISED 7-01-08
TI-23
18
5
2
14
14
13 13
16B
11 4
16B 11
12
12
15
3
10
10 15
10
8 15
16 15
9 8A 8
16A
9 9A
9A
16 16A
NOTE: Items 9A & 16A are for 6 X 3M & 6 X 5M "New
Style" Type 90 Annular BOPS and require an additional
lower piston seal and the 1" piston I.D. wear band material 1
changes to 1/2" wear band material. Item 16B is an
additional wear band added to adapter I.D. after 2005.
17
NOTE: Items 8 & 8A are specific to 13-5/8 X 3/5M annular
preventers. Item 8 is a polymeric type seal and 8A is a hard
band type seal. New 13-5/8 X 3/5M Type 90 Annular, after
7/1/08 are equipped at the factory with the hard band type seal.
REVISED 7-01-08
TI-24
7-1/16 X 3M - 7-1/16 X 5M - 9 X 3M
11 X 3M - 11 X 5M - 13-5/8 X 5M
TOWNSEND TYPE 90 ANNULAR BOPS ARE
AVAILABLE WITH STANDARD PACKING UNITS OR
THE PATENTED ANUFLEX STYLE UNIT.
THE ANUFLEX INSERT HINGES AS THE RUBBER IS
CLOSED AND OPENED. ANUFLEX PACKING UNITS
HAVE A LONGER LIFE CYCLE.
REVISED 7-01-08
TI-25
SHAFFER SENTINEL I & II & WSI are registered trademarks of their respective companies. Townsend International BOP is not affiliated with these companies.
REVISED 4-01-08
TI-26
REVISED 4-01-08
TI-27
REVISED 4-01-08
TI-28
REDA-CABLE SLOT
"FLAT OR ROUND"
RAM ASSEMBLY REDA-CABLE SIZE RAM BLOCK FACE SEAL TOP SEAL
2 1.90" 2 1.25"
4 1.625" 4 1.125"
FLAT 6 1.50" 6 1.00" ROUND
REDA-CABLE REDA-CABLE
REVISED 6-23-08
TI-29
7-1/16" X 3M HYDRAULIC
RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL
SHAFFER is a registered trademark. Townsend International BOP is not affiliated with thIs company.
REVISED 4-01-08
TI-30
9" X 3M HYDRAULIC
RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL
REVISED 4-01-08
TI-31
NOTICE: TOWNSEND is not affiliated with Shaffer. Shaffer and Chasavoy are registered trademarks of Shaffer.
REVISED 4-01-08
TI-32
O.D. 8” x 3M 13-5/8” x 3M
6” x 3M 10” x 3M 10” x 5M
PIPE 8” x 5M 13-5/8" x 5M
Type 39 Type 39 Type 48
INCHES Type 39 Type 480
RETAINER SCREW
Fits All 192034 192034 192034 192034 192034
Pipe Sizes
BOP A, B, E, A, B, E, A, B, E, A, B, E, A, B, E,
TYPE 39 39 LWS, 39 LWS, 39 LWS
SHAFFER is a registered trademark of The Shaffer Co.
REVISED 4-01-08
TI-33
O.D. RAM RAM BLOCK RAM RAM BLOCK RAM RAM BLOCK
PIPE SIZE BLOCK SUB ASSEMBLY BLOCK SUB ASSEMBLY BLOCK SUB ASSEMBLY
NOTE: Block Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber to Block Screws only.
REVISED 4-01-08
TI-34
2-1/16” 142644
2-3/8” 135858 •
2-7/8” 135859 •
NOTE: Two Retainer Screws, Part #135545 are
3-1/2” 135860 • included with each Ram Rubber.
4” 135861
4-1/2” 135862 •
• NOTE: Standard pipe sizes that are
5” 142725 available at most stocking locations.
Other sizes stocked at TOWNSEND
5-1/2” 116116 main warehouse locations.
Retainer
135545 •
Screw
REVISED 4-01-08
TI-35
H2S Trim
141202 141202
Retractor Screw
REVISED 4-01-08
TI-36
OD ● OD •
PIPE PART NO. SEE PIPE PART NO. SEE
SIZE NOTE SIZE NOTE
1.900 131611 •
1.900 130532 •
2-1/16” 131616
2-1/16” 130537
2-3/8” 131619 •
2-3/8” 130541 •
2-7/8” 131622 •
2-7/8” 130543 •
3-1/2” 131625 •
3-1/2” 130546 •
4” 131628
4-1/2” 131631 •
• NOTE: Standard pipe sizes,
other sizes available by special 5” 131634 •
order.
5-1/2” 131637 •
REVISED 4-01-08
TI-37
REVISED 6-23-08
TI-38
O.D. RAM RAM SUB RAM RAM SUB RAM RAM SUB
PIPE BLOCK ASSEMBLY BLOCK ASSEMBLY BLOCK ASSEMBLY
STANDARD
RETRACTOR 135575 135575 135575 135575 135575 135575
SCREW
H 2S
RETRACTOR 141200 141200 141200 141200 141200 141200
SCREW
NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.
REVISED 4-01-08
TI-39
STANDARD
RETRACTOR 137881 137881 137881 137881
SCREW
H 2S
142061 (CSO - 7”) 142061 (CSO – 7”)
RETRACTOR 142061 142061
142065 (7-5/8” - 8-5/8”) 142065 (7-5/8” - 8-5/8”)
SCREW
REVISED 4-01-08
TI-40
O.D. PIPE 7-1/16” BORE 11” BORE 13-5/8” BORE 16-3/4” BORE 21-1/4” x 2M 21-1/14” BORE
INCHES 3M, 5M, 10M, 15M 3M, 5M, 10M 3M, 5M, 10M 3M, 5M, 10M 20-3/4” x 3M 5M, 10M
UPPER SEAL
Fits All ST-19475 ST-19270 ST-19517 ST-38863 ST-19514 ST-40972
Pipe Sizes
CAMERON and Type U are registered trademark of the Cameron Co.
REVISED 4-01-08
TI-41
NOTE: TOWNSEND also offers 11 x 15M, 13-5/8 x 15M, 16-3/4 x 3/5/10M, 21-1/4 x 2M, and 21-1/4 x 3M Ram Blocks.
TOWNSEND manufactures the same series in Shear Ram Blocks. Contact a TOWNSEND representative for additional information.
REVISED 4-01-08
TI-42
T OWNSEND’ S Variable Bore Ram Rubbers (“VBR”) are designed to seal around a variety of pipe
sizes.
T OWNSEND’ S also manufactures the “VBR” Ram Block in both 11” and 13-5/8” sizes to fit
Cameron Type U Blowout Preventers. T OWNSEND’ S Finger Insert design rotates as the hydraulic
pressure is applied and the Ram Blocks begin to close allowing the Ram Rubber to seal around a
variety of pipe sizes and eliminating changing Ram Rubbers each time you change pipe size.
T OWNSEND’ S “VBR” Rubbers have been field tested to confirm durability.
Note: T OWNSEND “VBR” Rubbers and Top Seals do not fit Standard Type U Ram 2
Blocks, but are interchangeable with OEM Rubbers & Blocks.
REVISED 4-01-08
TI-43
7-1/16 x 5/10/15M
4
1 Right Side Packer
DESCRIPTION PART NO.
2 Left Side Packer
Right Side Packer Paddle ST-49358-01 3 Blade Packer
4 Top Seal
Left Side Packer Paddle ST-49358-02 5 Upper Block
Combination Packer ST-49347-01 1 5
REVISED 4-01-08
TI-44
BOP STANDARD H 2S
SERIES RAM
STYLE TRIM TRIM
REVISED 4-01-08
TI-45
5 7
6
9
5 Cap Screw, Hinge Brkt. Sm. 4 (2) TH7146 TH7146 TH7146 TH7146-11-5 TH7146-11-5
5 Cap Screw, Hinge Brkt Lg. 2 TH7147 ----- ----- ----- -----
REVISED 4-01-08
TI-46
4
2
1 Operating Piston
2 Operating Cylinder
3 Ram Change Piston – Open
4 Ram Change Piston – Close
5 Ram Change Cylinder
6 Locking Screw
3 1 5
6
ST-30320 (O/S)
7-1/16 x 3/5M ST-30274-2 ST-30324 ST-30325 ST-30273-2 ST-30326
ST-667940
ST-30320 (O/S)
7-1/16 x 10/15M ST-30274-2 ST-30324 ST-30325 ST-30273-2 ST-30326
ST-667940
ST-30364 (O/S)
11 x 3/5/10M ST-30274-3 ST-30362 ST-30363 ST-30273-3 ST-30365
ST-673178
ST-30311 (O/S)
12 x 3M ST-30274-1 ST-30310 ST-30309 ST-30273-1 ST-30307
ST-679816
ST-30311 (O/S)
13-5/8 x 5M ST-30274-1 ST-30310 ST-30309 ST-30273-1 ST-30307
ST-679816
ST-31240 (O/S)
13-5/8 x 10/15M ST-30274-1 ST-31239 ST-31238 ST-30273-1 ST-30307
ST-678512
ST-38846 (O/S)
16-3/4 x 5M ST-30274-6 ST-38847 ST-30848 ST-30273-6 ST-38901
ST-689562
ST-30847 (O/S)
20 x 2/3M ST-30274-4 ST-30848 ST-30849 ST-30273-4 ST-30846
ST-690058
* O/S denotes Old Style Operating Piston
CAMERON & Type U are registered trademark of The Cameron Co.
REVISED 4-01-08
TI-47
TOWNSEND’ S Bonnet Rebuild Kit cannot be compared with kits offered by OEM’s. TOWNSEND’S Kits exclude
major expense items that usually do not need replacing.
Each TOWNSEND Bonnet Rebuild Kit comes with an exploded view of the Bonnet with a listing of parts included
in each Kit.
REVISED 4-01-08
TI-48
TOWNSEND TYPE 81 BOP SHAFFER TYPE LWS BOP CAMERON TYPE SS BOP
SERIES KIT NO. SERIES KIT NO. SERIES KIT NO.
7-1/16 X 3M MANUAL TM8100 6 x 3/5M 880000 7-1/16 x 3/5M 16206-06
7-1/16 X 3M HYDRAULIC TH8100 8 x 3/5M 881000
8 x 3M 16036-103
7-1/16 X 5M MANUAL TM8100 11 x 3M 880000
8 x 5M 16036-105
7-1/16 X 5M HYDRAULIC TH8100 11 x 5M 881000
11 x 3M 16036-103
9 X 3M MANUAL TM8100 13-5/8 x 3/5M 881000
11 x 5M 16036-105
9 X 3M HYDRAULIC TH8100 16-3/4 x 3M 881000
12 x 3M 16112-123
9 X 5M HYDRAULIC TH8100 7-1/16 x 10/15M 882000
14 x 5M 17676-145
9 x 10M 883000
TOWNSEND TYPE 82 BOP
11 x 10M 884000 CAMERON TYPE QRC BOP
SERIES KIT NO.
20 x 3M 885000 SERIES KIT NO.
7-1/16 X 3/5M TH7100
NOTE: T OWNSEND does not include NOTE: Each Seal Kit is to repair one
Door Seals with Seal Kits, they are Bonnet. If repairing a Single BOP, it
sold separately. would require two (2) Kits.
REVISED 4-01-08
TI-49
In some cases the OEM offers more than one version or style Door Seal for a particular Preventer. TOWNSEND
also offers the different styles. TOWNSEND’S Part Number may not coincide with OEM’s current number.
Contact a TOWNSEND representative for crossover.
SHAFFER TYPE 39 BOP SHAFFER TYPE LWP BOP SHAFFER TYPE B BOP
8 x 3M 8-39 6 x 5M 30166
8 x 3M 30030
10 x 3M 10-39 8 x 3M 30167
NOTE: T OWNSEND does not include Door
12 x 3M 12-39 8 x 5M 30167
REVISED 4-01-08
TI-50
SHAFFER TYPE LWS BOP TOWNSEND TYPE 99 HYDRAULIC CAMERON TYPE SS BOP
6 x 5M 30030 6 x 5M 18493-5
REVISED 4-01-08
TI-51
TOWNSEN D’S Packing Units are tested before sale using API
test standards in both open hole conditions and on drill pipe.
All Packing Units are subject to a API drift test after
performing Annular test on rubber to confirm that they will
open back up to standard size.
HEAD
LOCKING
SCREW
RUBBER TYPE
HEAD
SERIES LOCKING
SCREW
SYNTHETIC NATURAL
PACKING
UNIT 7-1/16" x 3M 63-31078-S 63-31078-N 63-31607
7-1/16" X 5M
TOWNSEND 63-31078-S 63-31078-N 63-31607
SHORTY
7-1/16" x 5M
65-30667-S 65-30667-N 65-30695
HYDRIL GK
REVISED 4-01-08
TI-52
7-1/16" X 5M
63-31602 63-31603 103-31604 63-15614 63-50683 100-29644
TOWNSEND 84
7-1/16” x 5M
65-30690 65-30689 65-30688 65-30705 65-50684 100-29644
HYDRIL GK
13-5/8” x 5M
123-31738 135-38151 135-38152 135-38165 135-50691 * 100-29644
Latched Head
* To complete the Seal Kit for a 13-5/8” x 5M Latched Head GK Annular Blow-
out Preventer, (1) Part #202-37381 Head Seal is also required.
REVISED 4-01-08
TI-53
REVISED 4-01-08
TI-54
A N U F L E X - PACKING UNIT
(COMPATIBLE WITH SHAFFER ANNULAR BOP’S)
(PATENTED)
REVISED 4-01-08
TI-55
A N U F L E X® PACKING UNITS
(COMPATIBLE WITH SHAFFER ANNULAR BOP’S)
(PATENTED)
REVISED 4-01-08
TI-56
REVISED 5-23-08
TI-57
TOWNSEND test units are specifically manufactured for testing BOP Stacks,
Valves, Chokes, Kill Lines and Christmas Trees. (Air and water supply are
required.) Chart Recorders and High Pressure Hose assemblies are also
available upon request. Test units are manufactured to customers
specifications and instructions.
REVISED 4-01-08
TI-58
Regulator Valve Repair Kit 1700-2100 3/4” Relief Valve (3500 PSI)
1110-2199
(For 1110-2100)
1700-3100 3/4” Relief Valve (5500 PSI)
MKR Manual Regulator
1110-3100
1” Full Flow w/1-1/2” Outlet 2200-0100 Electric Pressure Switch
Regulator Valve Repair Kit 2200-0199 Repair Kit – Electric Pressure Switch
1110-3199
(For 1110-3100)
KOOMEY, STEWART & STEVENSON, SHAFFER, and VALVCON are registered trademarks.
REVISED 4-01-08
TI-59
REVISED 4-01-08
TI-60
REVISED 4-01-08
TI-61
REVISED 4-01-08
TI-62
OVAL
BX STYLE RING GASKETS
REGULAR 316
RING
FLANGE/PSI STEEL STAINLESS
SIZE
PART NO. PART NO. OCTAGONAL
REVISED 4-01-08
TI-63
All Studs and Bolts are B-7 API standard and Nuts are
Grade 2H Hex Nuts.
300-715 8 3/4” x 5-1/2” 2-1/16” x 10M 300-315 N/A 1" x 4-1/4" N/A - BOP
REVISED 4-01-08
TI-64
TOWNSEND ACCESSORIES
CROSSES TEES
COMPANION FLANGES
API RING GASKETS
BLIND FLANGES
API STUDS & NUTS
REVISED 4-01-08
TI-65
DIMENSIONS
BOP CAPACITIES
PISTON STROKE
4-1/18" 4-1/14" 5-1/8" 5-1/8"
(TO OPEN & CLOSE) (INCHES)
WEIGHTS
REVISED 4-01-08
TI-66
DIMENSIONS
BOP CAPACITIES
WEIGHTS
REVISED 4-01-08
TI-67
DIMENSIONS
SIZE STYLE 9 X 3M
BOP CAPACITIES
SIZE 9 X 3M
PISTON STROKE
5-1/8"
(TO OPEN & CLOSE) (INCHES)
WEIGHTS
SIZE 9 X 3M
STUDDED 1,170
SINGLE
FLANGED 1,430
STUDDED 2,200
DOUBLE
FLANGED 2,460
REVISED 4-01-08
TI-68
TOWNSEND
TYPETYPE99 RAM81 HYDRAULIC
TYPE BOP BOP
7-1/16DIMENSIONS
HYDRAULIC X 3M – &7-1/16 X 5MDATA
SPECIFICATION
9 X 3M – 9 X 5M
DIMENSIONS WEIGHTS
OVERALL HEIGHT
STUDDED SINGLE 20.50" STUDDED 1,400
(LESS STUDS) SINGLE
OVERALL HEIGHT FLANGED 1,600
DOUBLE 33.88"
FLANGED
BOP CAPACITIES
SIZE 7-1/16 X 5M
PISTON STROKE
4.062"
(TO OPEN & CLOSE) (INCHES)
SHAFFER CHASOVOY is a registered trademark of it's respective company. TOWNSEND INTERNATIONAL BOP is not affiliated with this company.
REVISED 4-01-08
TI-69
REVISED 4-01-08
TI-70
OVERALL HEIGHT SINGLE 29-1/8" 34-3/8" 31-3/8" 33-7/8" 11 X 3M 5,300 LBS. 9,900 LBS.
FLANGED DOUBLE 49-1/4" 54-1/2" 53-3/8" 55-7/8" 11 X 5M 5,600 LBS. 10,200 LBS.
OVERALL LENGTH 96-1/4" 96-1/4" 112-1/8" 112-1/8" 13-5/8 X 3M 7,200 LBS. 14,300 LBS.
OVERALL WIDTH 25-1/8" 25-1/8" 29-1/4" 29-1/4" 13-5/8 X 5M 7,700 LBS. 14,800 LBS.
WORKING PRESSURE (LBS.) 3000 PSI 5,000 PSI 3,000 PSI 5,000 PSI
TEST PRESSURE (LBS.) 3000 PSI 5,000 PSI 3,000 PSI 5,000 PIS
3.4 GALLONS
MAXIMUM OPERATING PRESSURE 1,500 PSI 1,500 PSI 1,500 PSI 1,500 PSI
(TO OPEN & CLOSE) (PSI)
RECOMMENDED OPERATING PSI 1,500 PSI 1,500 PSI 1,500 PSI 1,500 PSI
(TO OPEN & CLOSE) (PSI)
REVISED 4-01-08
TI-71
DIMENSIONS
SIZE 7-1/16 X 3M 7-1/16 X 5M
OVERALL HEIGHT
STUDDED
LESS STUDS 40" 40"
BOTTOM
(STUDDED TOP)
BOP CAPACITIES
SIZE 7-1/16 X 3M 7-1/16 X 5M
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M
STUDDED 4,000 LBS. 4,500 LBS
REVISED 4-01-08
TI-72
DIMENSIONS
SIZE 7-1/16 X 3M 7-1/16 X 5M
OVERALL HEIGHT
STUDDED
LESS STUDS 35-1/2" 35-1/2"
BOTTOM
(STUDDED TOP)
BOP CAPACITIES
SIZE 7-1/16 X 3M 7-1/16 X 5M
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M
STUDDED 4,675 4,675
REVISED 4-01-08
TI-73
DIMENSIONS
STUDDED
OVERALL HEIGHT 27-3/4" 30-3/4" 32-3/4" 33" 34-1/4" 39-5/8" 39-3/8"
BOTTOM
LESS STUDS
(STUDDED TOP) FLANGED
32" 33-1/2" 37-3/4" 38" 39-1/4" 47-3/4" 45-1/4"
BOTTOM
OPENING THROUGH PREVENTER 7-1/16" 7-1/16" 9" 9" 11" 11" 13-5/8"
WORKING PRESSURE (LBS.) 3,000 5,000 3,000 5,000 3,000 5,000 3,000
TEST PRESSURE (LBS.) 3,000 5,000 3,000 5,000 3,000 5,000 3,000
BOP CAPACITIES
VOLUME OF FLUID TO CLOSE 2.85 2.85 4.33 6.84 7.43 9.81 11.36
PISTON STROKE (INCHES) 4-1/18" 4-1/2" 5-3/4" 5-3/4" 6-1/8" 7-1/8" 7-1/8"
WEIGHTS
REVISED
REVISED
4-01-08
11-13-06
TI-74
DIMENSIONS
SIZE 7-1/16 X 3M 7-1/16 X 5M 9 X 3/M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
STUDDED
OVERALL HEIGHT 25-1/2" 25-1/2" 27-1/8"" 27-1/8" 33-7/8" 34-1/2" 37-5/8"
BOTTOM
LESS STUDS
(STUDDED TOP) FLANGED
29-1/4" 30-7/8" 32-1/2" 32-7/8" 41-1/2" 41" 45"
BOTTOM
OVERALL WIDTH BODY 29" 29" 35-1/2" 39-1/2" 44-3/4 46-1/2" 50"
OPENING THROUGH PREVENTER 7-1/16" 7-1/16" 9" 11" 11" 13-5/8" 13-5/8"
HYDRAULIC CONNECTION (2) 1" 1" 1-1/4" 1" 1-1/4" 1-1/2" 1-1/2"
WORKING PRESSURE (LBS.) 3,000 5,000 3,000 3,000 5,000 3,000 5,000
TEST PRESSURE (LBS.) 3,000 5,000 3,000 3,000 5,000 3,000 5,000
BOP CAPACITIES
SIZE 7-1/16 X 7-1/16 X 5M 9 X 3M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
VOLUME OF FLUID TO CLOSE 4.92 4.92 7.23 11.00 18.67 23.58 23.58
PISTON STROKE (INCHES) --- --- --- --- --- --- ---
WEIGHTS
SIZE 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M
REVISED 4-01-08
TI-75
REVISED 4-01-08
TI-76
REVISED 4-01-08
TI-77
REVISED 4-01-08
TI-78
REVISED 4-01-08
TI-79
PIPE WIPERS
TOWNSEND offers Single, Dual and Dual Split Pipe Wipers. Pipe Wipers are
available in 9” through 19”. Single and Dual Solid Pipe Wipers have a hard
rubber insert to prevent Wiper from being pulled through Master Bushing. Dual
Split Pipe Wipers have a metal spring insert which allows Wiper to split and
wrap around pipe when using a Solid Master Bushing.
REVISED 4-01-08
TI-80
TONG STRAPS
TOWNSEND offers Tong Pull Back Straps with the Brass Inserts to prevent sparks
on use with gas wells. TOWNSEND's Tong Straps are made from the highest
quality rubber compounds to guarantee longevity and strength.
SWAB CUPS
TOWNSEND offers Swab Cups with either Steel Sleeves or Aluminum.
TOWNSEND's Swab Cups are available in Standard and Oversize styles.
TOWNSEND's Swab Cups have been specially designed to pull the maximum
load while swabbing.
REVISED 4-01-08
TI-81
REVISED 4-01-08
TI-82
SAF-T-SLIDE
Saf-T-Slide is designed for use as a quick escape device from a structure,
DE
RR
tower or derrick in case of an emergency. Saf-T-Slide is constructed of
IC
K materials such as Aluminum Wheels and Brass Braking Device to prevent
sparks when in an H2S gas environment. The Saf-T-Slide Brake is spring
loaded to lock any time the device is not in use. The descent from the
GR
OU structure is controlled by a Hand Brake which the operator controls. The
ND
Saf-T-Slide is easily maintained and operates in all types of weather.
REVISED 4-01-08
TI-83
REVISED
REVISED
4-01-08
12-01-06
NOTICE
TOWNSEND INTERNATIONAL BOP’S is "IN NO WAY" affiliated with any other
original equipment manufacturer's represented in it's General Catalog, Parts Catalog or
Brochures. More specifically: CAMERON, SHAFFER, HYDRIL, WSI, CONTROL
FLOW, GRANT, KOOMEY, VALVCON STEWART & STEVENSON and GREER. All
parts and assemblies and blowout preventers listed are manufactured by TOWNSEND, to
be used as a TOWNSEND product or replacement part for other Original Equipment
Manufacturers assemblies or B.O.P.‘S. Some part numbers are interchangeable with
those of other manufacturers, only for the purpose of reference.
TRADEMARK
TOWNSEND has trademarked it's name and it's "Blowout Preventer Stack Logo" along
with specific slogans. Any unauthorized use of the blowout preventer stack or slogans or
duplication of text is prohibited without the written consent of TOWNSEND
INTERNATIONAL BOP‘S, INC..
COPYRIGHT © 2008
The text of this publication, or any part thereof, may not be reproduced or transmitted in
any form or by any means, electric or mechanical, including photocopying, recording,
storage in any information retrieval system, or otherwise; without the prior written
consent of TOWNSEND INTERNATIONAL BOPS, Odessa, Texas USA.
REVISED 4-01-08
TOWNSEND TYPE 81 MANUAL
TOWNSEND TYPE 90 ANNULAR TOWNSEND TYPE 82-90 SHAFFER SENTINEL II
SHAFFER ANNULAR ANNURAM BOP WSI DUKE
SHAFFER ANNULAR/
SHAFFER LWS RAM BOP
REVISED 4-01-08