Professional Documents
Culture Documents
Adobe Scan Dec 19, 2022
Adobe Scan Dec 19, 2022
To,
The Engineer in Chief,
Sanitation (RWS&S),
Rural Water Supply &
Odisha.
Jal 'O' Parimal Bhawan, Bhubaneswar,
block
at Kalampur, Jaipatna & Junagarh
Sub: Approval of Structural design & drawings for 26 Nos ESR,s limited.
& Infrastructure
of Kalahandi District as submitted by M/s Megha Engineering
Nos ESR,s at
Dear Sir, and drawings for 26
subject,review of the structural design Engineering &
With reference to the above submitted by M/s Megha
block of Kalahandi District as
Kalampur, Jaipatna & Junagarh been approved
and drawings have
ou that the Structural design
Infrastructure limited. It's to inform
as per standard procedure.
are requested to proceed submitted
with minor observation. Also, you which are marked in
recommended to kindly include all the observations
The agency is
or as mentioned below.
structural design and drawings
at edge.
recommended as 250 mm.
In conical wall thickness provided as 225mm, whereas
5. at top and
4-160 ST+3-160 (Extra support)
reinforcement provided as
6. In bracing beam B1
at top and bottom.
to 3-200 ST+3-160 (Extra support)
bottom, which shall be revised
ST+2-160 (Extra mid) at
beam longitudinal reinforcement provided as 4-160
7. In bottom ring
to 4-200 ST+2-160 (Extra mid)
at bottom.
ottom, which shall be revised at top and
reinforcement provided as 4-160
ST+2-160 (Extra support)
8. In bracing beam B1a
at top and bottom.
which shall be revised to 3-200 ST+2-120 (Extra support)
bottom,
as 9-200, which shall
be revised to 11-200.
9. In column vertical reinforcement provided calculation
as per design
foundation width provided as 1850 mm, but
10.In annular raft
recommended as 2000mm.
5. In bracing beam B1 reinforcement provided as 4-160 ST+3-160 (Extra support) at top and
bottom, which shall be revised to 3-200 ST+3-200 (Extra support) at top and bottom.
beam B1a reinforcement provided as 4-160 ST+2-160 (Extra support) at top and
6. In bracing
bottom, which shall be revised to 3-200 ST+3-120 (Extra support) at top and bottom.
reinforcement provided as 4-160 ST+2-160 (Extra mid) at
7. In bottom ring beam longitudinal
ST+2-160 (Extra at bottom.
mid)
bottom, which shall be revised to 4-200
to 10-200.
8. In column vertical
reinforcement provided as 9-200, which shall be revised
as per design
calculation
foundation width provided as 1700 mm, but
9. In annular raft
recommended as 1900mm.
District
220 KI@ 16 mStaging at Bhainripali GP of Kalahandi top and bottom face,
reinforcement provided as 12@125 mm c/c at
1. In conical dome hoop
both face.
which shal be revised to 16@175mm c/c at
c/c at top and bottom face,
dome radial reinforcement provided as 10@150
mm
2. In conical
which shall be revised to 12@175 mm c/c at both face.
revised to 225mm thk
3. Bottom dome thickness provided as 200 mm thick at edge, which shall be
at edge.
4-160 ST+3-160 (Extra support) at top and
4. In bracing beam B1 reinforcement provided as
at edge.
recommended as 600x900mm.
6. In bottom ring beam size provided as 450x1050mm, whereas
shall be
7. In bottom ring beam longitudinal reinforcement provided as 4-200 ST at bottom, which
revised to 4-200 ST+2-160 (Extra mid) at bottom.
8. In column size provided as 450x450mm, whereas recommended as 6000.
9. In column vertical reinforcement provided as 4-200+4-160, which shall be revised to 10-200.
10.in foundation ring beam size provided as 550x750mm, which shall be revised to 700x900mm.
11.in foundation ring beam longitudinal reinforcement provided as 4-160 at top, whereas
recommended as 5-160 (ST) at top.
12.In annular raft foundation width provided as 1550 mm, but as per design calculation
recommended as 2000mm.
13.In foundation reinforcement radial and hoop reinforcement provided as 12@150 c/c radial &
12@175 mm c/c hoop at bottom face, which shal be revised to 16@200 c/c radial & 12@175
mm c/c hoop at bottom face.
at edge.
2. In conical wall thickness provided as 225mm, whereas recommended as 250 mm.
3. In bracing beam B1 reinforcement provided as 3-160 ST+2-160 (Extra support) at top and
bottom, which shall be revised to 3-200 ST+3-160 (Extra support) at top and bottom.
4. In column vertical reinforcement provided as 7-200, which shall be revised to 9-200.
at edge.
4. In annular raft foundation width provided as 1700 mm, but as per design calculation
recommended as 2400 mm.
5. In foundation reinforcement provided as 16@150 mm c/c radial & 12@175 mmc/c hoop at
bottom and 12@175 mm c/cboth ways top, whereas recommended as 16@125 mm c/c radial
&12@150 mm c/c hoop at bottom and 12@150 mm c/c both ways at top.
320 KI@22 mStaging at Pandigaon GP of kalahandiDistrict at top and
1. In bracing beam B1 reinforcement provided as 4-200 ST+3-160 (Extra support)
bottom, which shall be revised to 4-200 ST+3-200 (Extra support) at top and bottom.
2. In bracing beam B1a reinforcement provided as 4-160 ST+2-16o (Extra support) at top and
bottom, which shall be revised to 3-200 ST+3-160 (Extra support) at top and bottom.
3. Bottom dome thickness provided as 200 mm thick at edge, which shall be revised to 225mm thk
at edge.
4. In bottom dome reinforcement provided as 10@200 mm c/c both ways both face, whereas
recommended as 10@175 mm c/c both ways both face.
5. In conical dome radial reinforcement provided as 10@150 mm c/c at top and bottom face,
which shall be revised to 12@175 mm c/c at both face.
6. In annular raft foundation width provided as 1850 mm, but as per design calculation
recommended as 2400 mm.
7. In foundation reinforcement provided as 16@150 mm c/c radial & 12@175 mm c/c hoop at
bottom and 12@175 mm c/c both ways top, whereas recommended as 16@125 mm c/c radial
&12@150 mm c/c hoop at bottom and 12@150 mm c/c both ways at top.
320 KI@20 mStagingat Dundelmal GP ofkalahandi District
1. In bracing beam B1 reinforcement provided as 4-200 ST+3-160 (Extra support) at top and
bottom, which shall be revised to 4-200 ST+3-200 (Extra support) at top and bottom.
2. In bracing beam Bla reinforcement provided as 4-160 ST+2-160 (Extra support) at
bottom, which shall be revised to 3-200 ST+3-160 (Extra support) at top and bottom.
3. In foundation reinforcement provided as 16@150 mm c/c radial at bottom, whereas
recommended as 16@125 mm c/c radial at bottom.
4. In column vertical reinforcement provided as 9-250, which shall be revised to 11-250.
300 KI@12 m Staging at Baladiama GP of kalahandi District
1. In bracing beam B1 reinforcement provided4-160 ST+2-120 (Extra support) at top and
as
bottom, which shall be revised to 3-200ST 3-120 (Extra support) at top and bottom.
2. In bracing beam size provide 300x450, which shall be revised to 400x500mm.
3. Bottom dome thickness provided as 200 mm thick at edge, which shall be revised to 225mm thk
at edge.
4. In conical dome radial reinforcement provided as 10@150 mm c/c at top and bottom face,
which shall be revised to 12@175 mm e/c at both face.
5. In annular raft foundation width provided as 1600 mm, but as per design calculation
5. In raft foundation outer projection provided as 600 mm, but as per design calculation
recommended as 1000 mm.
6. In container wall thickness provided as 200mm, whereas recommended as 250mm.
Yours Sincerely,
Yours Sincerely,
Lagnajit Das
Mudit Kumar Verma
Team Leader (Design Cell, RWS&S)
Structural Engineer (Design Cell, RWS&S)