Professional Documents
Culture Documents
NOTE-
1 test tube of dilute sulphuric acid is added while preparing mohr’s salt
solution to prevent hydrolysis of the salt.
1 test tube of dilute sulphuric acid is added to the pipetted solution before
titration to provide acidic medium.
Calculation of Molarity and strength
M1 =
Theory-
PROCEDURE
= M1 x 158
1. Ammonium carbonate
2. Lead acetate
3. Calcium chloride
4. Aluminium nitrate
5. Lead nitrate
6. Ammonium sulphate
Organic Analysis 6 marks
Study all the functional groups which you wrote in Record book
1. Aldehyde
2. Phenol
3. Carboxylic acid
4. Alcohol
5. Ketone ( Any two will be given)
Record +viva – 4 marks
Project + viva – 4 marks
SAMPLE
COLUMN
NO NEED TO WRITE IN THE ANSWER SHEET-
understand the Procedure and do the titration accordingly-
Weigh out 1.96 g of mohr’s salt and transfer in to a 100ml standard flask . Add one test
tube sulphuric acid and make up to 100ml.
Rinse and fill the burette with the given KMnO4 solution
Pipette out 20 ml mohrs salt solution in to a conical flask and add 1 test tube of sulphuric
acid
Add KMnO4 from burette till a light pink colour is imparted to the solution in the flask.
Weigh out 0.63 g of oxalic acid and make up to 100ml in a standard flask.
Rinse and fill the burette with the given KMnO4 solution
Pipette out 20 ml oxalic acid solution in to a conical flask , add 1 test tube of sulphuric acid
and heat up to 60 degrees.(till you see fumes coming out)
Add KMnO4 from burette till a light pink colour is imparted to the solution in the flask.