Professional Documents
Culture Documents
PROCONDIF® diffuser
The innovative
"procondive" method
Complex situation
Until recently, the use of non-highly entraining
air discharge from above in warehouses and lab-
oratories, etc. was somewhat problematic as the
cooled air discharged from the ceiling often
resulted in high downward velocities. The pre-
ferred solution was systems with extremely low
discharge velocities, although this led to large
diffuser areas and consequently costly products
or diffusers that took up a lot of floor space.
Special features:
The discharge pattern of ”procondive” air discharge, covering the full area,
controlled and low in turbulence
Optimum function
and design
Unique in design
The air diffusers are designed as a metal frame
with a honeycomb insert through which the air is
discharged. The various different designs of the
fine restrictions ensure that the velocity adopts
a particular profile. The different alignments of
the honeycomb cells create a pattern visible from
beneath that not only fulfils the function of
providing a differentiated discharge profile, but
also makes a coherent visual impression.
Extremely silent
Despite the high volume of air passing through
the outlet, PCD diffusers are extremely silent and
have a very low pressure loss.
PCDQ at 500 m3/h: Δp = 17 Pa, Lw(A) = 32 dB(A)
PCDR at 800 m3/h: Δp = 18 Pa, Lw(A) = 34 dB(A)
Meeting room for RAPP AG, Basle, Switzerland Laboratory for HILTI, Kaufering, Germany Laboratory ante-room for HILTI, Kaufering
Gives the architect
maximum freedom to design
Applications include:
• Modern systems using "soft"
cooling methods
• Passage zones in airports
• Exhibition halls
• Shopping centres / shops
• Printshops
• Laboratories
• Ward
• Operating theatres / clean rooms
• Control bays
• Foyers / corridors
• Fan coil units with ceiling
outlets