Installation of Chemical Waste Tank Ref. No: SUBCONTRACTOR CONTRACTOR Rev. No: 0 X Page : 1 of 1 SECTION OF WORK: PLUMBING LOCATION: LEVEL: WIR No.: STAGE ITEM Checked by Checked Date by S/C CONT Consulta nt SETTING OUT Check Layout Check Level, Check level depth. MEP/CIVIL Check for Services Clearances
INSTALLATION 1. Check records for Material
Inspection if Approved or not. 2. Check factory test record if approved or not. 3. Check the tanks, pipes supports are free of rust, weeps, or excessive dents on the tank surface. 4. Check that the levels and slope of installed pipes are as per approved shop drawings. 5. Check tank if free of drips or signs of leakage around valves, piping & gauges. 6. Check tank vents are free of obstructions or location as per approved shop drawings and to be in safe location & level. 7. Check tank & pipe coating are in good condition 8. Spill prevention measures are available. 9. Tanks components such as automatic shut-off devices, overfill alarms, float valve are installed correctly. 10. Check that the leak detection probe with audible & visual alarm at the BMS is done. For S/C QA/QC: Date: FOR Cont. QA/QC: Date: For Consultant Date: Rep.: