You are on page 1of 1

WORKSHEET ON FINENESS TEST OF CEMENT

Lab. No. : __________________________________________________________

Sample Identification : __________________________________________________________

Type : __________________________________________________________

Temp., 0C = ____________ RH, %= ____________

I. FINENESS : Air Permeability Method


Mass of tested sample from calibration (W) g ------------
Specific Surface of Std. sample (Ss) cm2/g ------------
Measured Time interval of Std. sample (Ts) ------------
Measured Time Interval of tested sample (T) ------------

Avg. T ------------

Ss √T
Specific Surface, cm2/g = = ------------
√ Ts

II. FINENESS BY: No. 200 Sieve


a. Wt. of sample, g -------
b. Wt. of sample retained, g -------

b
Fineness of cement, % Passing No. 200 Sieve = 100 - X 100 =
a

III. FINENESS BY: No. 325 Sieve (Wet Sieving):


a. Wt. of sample, g -------
b. Wt. of sample retained, g -------

% Retained = __b__ x 100 = ___________________


a

Tested/Computed by: Date Tested:


__________________________________ ____________________________
__________________________________ ____________________________
__________________________________ ____________________________

Checked/Reviewed by: ___________________________________________________________

CEI Form-42 Rev00


Worksheet on Fineness Test of Cement
Page 1 of 1

You might also like