Professional Documents
Culture Documents
A EARTHWORK
A-01 EXCAVATION
Excavation for foundations, substructures, trenches, sumps,
tunnels, pits etc. in all types of ordinary and hard soils
including all types of murum, with necessary shoring,
strutting, stacking selected material for backfilling or
disposing excess excavated material anywhere in the plot
area, for following depths measured from the ground level
including dewatering etc complete. (Excavation / removal of
rubble fill shall be paid under this item)
A-01-a Excvation in Soft Murrum - upto 1.50 m - below OGL CUM 1,000.00 ₹ 240.00 ₹ 2,40,000.00
B WATER-PROOF PAPER
B-01 Below PCC in sub-floor
Providing and laying in position where directed Shalimar' or
equivalent make waterproof packing paper weighing SQM 1,925.00 ₹ 40.00 ₹ 77,000.00
45gm/sm including 75mm overlaps, etc. complete.
C PLINTH WORK
C-01 Murrum Filling in Plinth
C-01-a Murrum brought from outside
Filling in foundation and plinth with approved material
(murrum) brought from outside in layers each not
exceeding 120 mm thick including watering, consolidating
each layer with 8 - 10 ton roller / mechanical CUM 2,887.50 ₹ 600.00 ₹ 17,32,500.00
compactor upto proctor density of 95 %, filling, leveling etc.
complete. (Consolidated material shall be measured for
payment.)
C-02 GSB
C-02-a 230 mm thick - 1 Layer
D CONCRETE WORK
D-01 PCC
Providing and Laying in situ Plain Cement Concrete of trap
metal for foundation including dewatering, formwork,
compacting curing & placing etc complete at all depths.
Below Footings / Rafts / Foundation / Below Ground Beam
D-01-a CUM 33.24 ₹ 6,000.00 ₹ 1,99,440.00
etc - ( 1:3:6 )
D-02 FOUNDATIONS
RCC work in machine mixed cement concrete designed
for specified Grade Nominal Mix, with approved design mix,
as per specifications at all levels including centering,
shuttering, leaving dowels if required and form work as per
required size and shape, casting in position using
plasticisers of MC Bouchemi or equivalent make as per
manufacturers instructions, consolidating with mechanical
vibrators, curing by forming ponds or otherwise, hacking
the exposed surface to receive plaster if needed, etc.
complete. Steel for reinforcement will be separately paid.
D-02-a Footings / Rafts - M25 CUM 97.50 ₹ 8,500.00 ₹ 8,28,750.00
D-04 BEAMS
RCC work in machine mixed cement concrete designed
for specified Grade Nominal Mix, with approved design mix,
as per specifications at all levels including centering,
shuttering, leaving dowels if required and form work as per
required size and shape, casting in position using
plasticisers of MC Bouchemi or equivalent make as per
manufacturers instructions, consolidating with mechanical
vibrators, curing by forming ponds or otherwise, hacking
D-04-a Till plinth level - M25 CUM 38.27 ₹ 9,500.00 ₹ 3,63,540.30
Name of Client : M/S. SHAYA POLYMERS PVT. LTD.
Name of Contractor : M/S. ALPHAS PROJECTS
Building / Structure Name : INDUSTRIAL BUILDING
Project Location : -PLOT NO. E4, SIPCOT INDUSTRIAL LAYOUT, SURVEY NO. 274 PT, 275PT,
276PT, KEEVALUR VILLAGE, SRIPERUMBUTHUR TALUK, KANCHEEPURAM DISTRICT.
ALPHAS PROJECTS
Document No : SPPL/AP/CIVIL/R0 ESTIMATE
E REINFORCEMENT STEEL
Mild steel and Tor steel or `T' Strong reinforcement in all
types of cement concrete work at all levels as per
structural drawing, steel specifications complying to ISI
Standards Grade I, including fan hooks, chairs, etc., cutting,
hooking, cranking, welding, placing in position and
binding etc. complete. Rate to include cost of binding wire
which will not be measured for payment. Quantity of steel
as per drawing with authorised overlaps recorded before
concreting will be measured and paid for, cutting wastage
upto 2% only will be allowed for reconciliation, wastage
above 2% shall be the property of the contractor and
shall be deducted at basic rate from the bill amount.
Theoretical weights of steel as per ISI shall be given. (Rolling
margin shall not be given)
E-02 Steel Grade - Fe 500 MT 29.91 ₹ 82,000.00 ₹ 24,52,582.35
G MASONRY WORK
G-01 BRICK WORK - 230 mm thick
providing and constructing burnt brick masonry 230 mm
thick of best available local make with minimum crushing
strength of 3 N/ sqmm and maximum water absorption of
20% in cement mortar mix in ratio of 1:5 ( 1 cement : 5 sand )
complete with required raking out joints, curing, doing
independent double legged scaffolding etc as per
specifications at all heights, depths and leads to the
satisfaction of the engineer in charge. The rate to also
include for the application of a boding agent as approved by
the engineer in charge between the junction of concrete and
brick masonry as per the procedure recommended by the
manufacturer.
G-01-a 230 mm thick - upto plinth level CUM 50.58 ₹ 6,900.00 ₹ 3,48,981.30
G-01-a 230 mm thick - above plinth level CUM 200.23 ₹ 7,300.00 ₹ 14,61,697.10
N WAFFLE WALLS
Providing, Casting and erecting in position M35 grade
reinforced cement concrete waffle wall as per approved mix
design including handling of mould supplied by others,
cleaning of mould, providing and applying shuttering oil to
mould, providing and fixing in position reinforcement &
welded wire mesh as per drawings including bar bending,
providing concreting and finishing with self compacted flow
concrete of specified grade, curing, demoulding the panel
after gaining the specified strength, lifting and transporting
the panel to desired location from casting yard as per
approved method of statement, erecting, connecting SQM 639.31 ₹ 3,500.00 ₹ 22,37,585.00
adjacent panels with specified bolts / anchor fasteners in
position including MS insert plates with grinding and
painting, filling the vertical gaps between the panels with
backer rod and high performance polyurethane sealant
(Make - Sikaflex),filling the bottom gap between the panel
and plinth beam with GP2 grout, all as per drawing, including
necessary scaffolding, staging, lifting and transporting
equipment's, testing the alignment, verticality, profile etc.
complete as per drawings & specifications.
H PLASTERING WORK
H-01 INTERNAL PLASTERING
Providing and applying externally sand faced plaster
minimum 12 mm thick over brick or concrete surface in two
coats, using well graded sand, including roughening the SQM 1,410.02 ₹ 500.00 ₹ 7,05,012.00
concrete surface, in cement mortar 1:4, in proper line &
level, curing the same for not less than 14 days.
Name of Client : M/S. SHAYA POLYMERS PVT. LTD.
Name of Contractor : M/S. ALPHAS PROJECTS
Building / Structure Name : INDUSTRIAL BUILDING
Project Location : -PLOT NO. E4, SIPCOT INDUSTRIAL LAYOUT, SURVEY NO. 274 PT, 275PT,
276PT, KEEVALUR VILLAGE, SRIPERUMBUTHUR TALUK, KANCHEEPURAM DISTRICT.
ALPHAS PROJECTS
Document No : SPPL/AP/CIVIL/R0 ESTIMATE
Rate shall also include for grouting the frame with Cement
Morter 1:5 at the Joints between Wall & frame to the
required thickness as per manufacture’s specifications
including.
(a) 1 No. heavy duty door CONCEALED doorcloser ITS 96 -
Dorma (b) 3 Nos.SS bal bearing butt
SQM 35.28 ₹ 12,000.00 ₹ 4,23,360.00
hinge 100x75x3mm - Dorma d)
Door louvers
J PAINTING WORK
J-01 INTERNAL PAINTING
Providing and applying 2 coats of Premium emulsion paint of
approved make and colour over a coat of primer as per
specifications of the manufacturer. The rate shall include any
old wall / surface scrapping, brushing, removing paint marks
over windows, doors, flooring etc. The rate is including cost SQM 553.39 ₹ 200.00 ₹ 1,10,678.40
and conveyance of all materials, scaffolding at all heights,
labour charges and all operational, incidental charges etc
complete for finished item of work for ceiling and internal
walls.
K MISCELLANEOUS WORK
K-01 FOUNDATION BOLTS
Fixing black MS Foundation bolts of 28 mm dia and 700 mm
in length, including hook and threading, etc all accessories NOS 440.00 ₹ 500.00 ₹ 2,20,000.00
complete
K-02 GROUTING
Providing and grouting below base plate of column,
equipments, around the foundation bolts or as directed with
cement mortar 1:2 including approved additives to form non
shrink grout(conbextra GP2/Fosrock/equivalent) cleaning the CUM 0.27 ₹ 60,000.00 ₹ 16,200.00
base by water or compressed air, including shuttering ,
scaffolding,curing and cleaning at all levels and heights, etc.
complete.