Professional Documents
Culture Documents
SCV721415110006
SCV721527000005
SCV721527000006
SCV721410010032
SCV721529000002
SCV721211010011
SCV721410010008
SCV721527020011
10
SCV721525090004
11
SCV721411240052
12
SCV721411240084
13
SCV721519080001
14
15
Item Description
EXCAVATION - Earthwork in excavation at all depths for foundation, drain, ramp,pits, etc., in a
soils including the area filled up with soil, in both Dry and Wet conditions, including Pumping a
out Surface and Subsoil water, rain water by using any suitable dewatering method, Shoring,
Slush removal, sorting out the excavated earth into serviceable and unserviceable material,in
backfilling in all positions, in layers of 150mm at all heights and depths as per Drawing and Spe
wherever required , in foundation pits and other places. The cost include transportation o
unserviceable/serviceable material into dumping yards or wherever required as per direction o
incharge upto any lead within plant boundary,spreading in layers of thickness not more than 2
per specifications and direction of Engineer.
PLAIN CEMENT CONCRETE M15 - Supplying and Laying Plain Cement Concrete of M15 Grade usi
Pozzalana Cement (PPC) confirming to IS 1489 part -II ; with river sand(Zone I/II) and 20mm a
graded hard stone broken stone in rigid pavement over a prepared Sub Base, trenchs, foundati
encasing, floorings, Pits etc., at all heights / depths, including centering & shuttering wherever
all materials, Manpowers, Machinery, curing, scaffolding, complete as per Drawings/Specifica
direction of Engineer in charge. Minimum cement content - 320kg/cum.
REINFORCED CEMENT CONCRETE M30 DESIGN MIX - Providing and laying in position Reinforce
Concrete in Design mix of M-30 Grade; using Portland Pozzalana Cement (PPC) confirming to IS
II ; with river sand(Zone I/II) and 20mm and down graded hard stone broken stone (minimum
Content 400kg/cum), including supplying and mixing Super- Plasticizer of approved brand/con
relevant IS Standard; including placing of concrete,providing pockets,openings, recesses, cha
wherever required etc., vibrating, tamping, curing and rendering if required. to give a smooth
surface etc. all complete (excluding the cost of reinforcement) for all structures ( confirming to
per the drawings, specifications and as directed by Engineering incharge.
REINFORCED CEMENT CONCRETE DESIGN MIX M40 as per IRC 44 - Providing and laying design m
concrete(PQC) of Grade M40( Mix design to be done as per IRC 44:2017 & Minimum cement
410kg/Cum) in roads, using 53 grade OPC confirming to IS 12269, Silica fume, coarse sand(Zone
and Coarse aggregate as per IRC 15 table 3 in appropriate proportions as per approved & spec
design criteria, supplying and mixing Super- Plasticizer of approved brand/conforming to rele
Standard, providing dowel bars with sleeve and tie bars as per IRC 15, laying at site, spreadi
compacting mechanically by using needle and surface vibrators, levelling to required slope/ c
finishing with required texture, including steel form work with sturdy M.S. channel sections, cur
provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm
per IRC 57 by groove cutting machine, providing and filling joints with approved Sealants/joint fi
of approved make, all complete as per specification, drawing & direction of Engineer-in-ch
REINFORCEMENT BAR FE 500D CRS - Supply, fabrication, hoisting and placing in position HYSD R
Steel (FE 500 D grade) CRS bars (RNIL/SAIL or equivalent make) ranging from 8mm to 32mm con
IS 1786 - Latest Edition as per detailed drawing and specifications including straightening cuttin
and tying with soft 18 gauge (1.22m dia) annealed binding wire complete .The rates shall be ap
all heights and depths, transportation to site etc. as directed by the Engineer-in-charge com
include all labour and materials Payment shall be made as per reinforcement drawings and
theoretical weights only including all authorised laps and hooks. Weight of binding wires sha
considered for measurement.
CENTERING AND SHUTTERING - Centering and shuttering (Steel/Ply) for all structure including
propping etc. and removal of form after the required interval from the date of casting including
labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T
complete as per direction of the Engineer -in-charge.
GRANULAR SUB-BASE - Providing and laying of granular sub-base by providing close graded Ma
be Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 as per Table 400-1 & Table
MORTH specification, mixing in a mechanical mix plant at OMC, carriage of mixed material by
work site, for all leads & lifts, spreading in layers of specified 200mm thickness with motor gr
prepared surface, watering and compacting with vibratory power roller of 8 to 12 tonne to ac
98% of the maximum dry density (Modified proctor density).all complete as per specificatio
directions of Engineer-in-Charge.
FOUNDATION BOLTS - Supply, Fabrication, installation and alignment ofl foundation bolt as
conforming to IS 5624 & IS 2062 and in concrete along with nuts, lock nuts (as per IS:1363, 1
IS:3138), washers, template/anchor plates, protective tape, pipe sleeves etc. including welding
grinding, threading, drilling etc. all completel as per drawings, specifications as direction of the
Charge at all heights & locations.
STEEL WORKS - Supplying, fabrication and erection of steel structures accordance with the ap
drawing for Columns, trusses, purlins, girders, brackets, Bracings, Tie beams, etc. with connec
plates, hollow section, channels and angles, gusset plate, foundation bolt, cleats, fasteners e
conforming to IS 226 and IS 2062 with minimum yield strength of 250Mpa.The rate of steel w
include assembly, welding, jointing, bending, building up new sections, cost of fasteners (nuts,
washers) etc., and including all materials, manpower, machinery like heavy duty Cranes, hyd
lifters, all temporary staging and supporting work, one coat zinc rich primer & two coat of Sy
enamel paint of approved shade after properly cleaning the steel surface, necessary bolts & w
fixing including grouting of bolts with 1:3 non shrink cement grout etc., complete all as per d
specifications and as direction of the Engineer In Charge at all heights & locations
RCC PIPE 500mm DIA NP3 - Providing and laying non-pressure NP3 class (Medium duty) 500mm
pipes with Socket & spigot confirming to IS 458, Rigid joint with stiff mixture of cement mort
proportion of 1:2 (1 cement : 2 fine sand) filled the annular space between Socket & spigo, layin
slope and gradient, this rate includes testing of joints, excavation, backfilling and anchor blo
including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sund
etc complete as per drawing/specification and direction of Engineer in charge.
RCC PIPE 1200mm DIA NP3 - Providing and laying non-pressure NP3 class (Medium duty) 120
R.C.C. pipes with Socket & spigot confirming to IS 458, Rigid joint with stiff mixture of cement m
proportion of 1:2 (1 cement : 2 fine sand) filled the annular space between Socket & spigo, layin
slope and gradient, this rate includes testing of joints, excavation, backfilling and anchor blo
including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sund
etc complete as per drawing/specification and direction of Engineer in charge.
BRICK WORK BELOW PLINTH - Construction of Brick work in below plinth using fly ash bricks
230x110x75 mm thick with minimum compressive strength of 75 kg/sqcm in cement morta
including curing and watering including cost of bricks and all materials, scaffolding, conveyance
and taxes, loading and unloading, labour,sundries, T&P etc.completed as direction of Engineer
UOM High Mast Drain Road Collection pit Manhole Total Quantity
Kg 504 0 0 0 0 504.000
MT 0 5.23 0 0 0 5.230
Rm 0 0 25 0 0 25.000
Rm 0 0 0 0 25 25.000
₹ 158 ₹ 777,864
₹ 6,945 ₹ 928,625
₹ 7,850 ₹ 3,617,543
₹ 10,250 ₹ 941,719
₹ 92,500 ₹ 5,866,947
₹ 435 ₹ 1,858,107
₹ 2,300 ₹ 64,607
₹ 98 ₹ 49,392
₹ 112,500 ₹ 588,375
₹ 6,900 ₹ 172,500
₹ 10,850 ₹ 271,250
₹ 5,465 ₹ 204,610
₹ 15,597,383
₹ 2,807,529
₹ 18,404,912