Professional Documents
Culture Documents
B1833005 For Aspen Hysys
B1833005 For Aspen Hysys
YEAR: FINAL
SEAT NO: B1833005
SEMESTER: 7th
SUBJECT: SIMULATION LAB ASSIGNMENT
1
CHAPTER 3
PUMP
DIAGRAM:
2
FURTHER STUDY:
Q: If the outlet temperature is 200°C, then what is the efficiency
of the pump?
RESULT:
3
CHAPTER 4
COMPRESSOR
DIAGRAM:
4
FURTHER STUDY:
Q: If the outlet temperature is 400°C, then what is the efficiency
of the Compressor?
RESULT:
5
CHAPTER 5
EXPANDER
DIAGRAM
FURTHER STUDY:
6
Q: If the outlet temperature is -30C, what is the efficiency of the
expander?
RESULT:
CHAPTER 6
HEAT EXCHANGER
7
DIAGRAM:
FURTHER STUDY:
8
Q: if the flowrate of the cold stream is 100kg/hr., determine the
flowrate of the hot stream passing through the exchange. What
is the amount of the heat transfer from hot stream to cold
stream?
RESULT:
CHAPTER 7
9
FLASH SEPARATOR
DIAGRAM:
FURTHER STUDY:
Q: if the cool gas is 10°F, what is the new flowrate and
compositions of streams?
10
RESULT:
CHAPTER 8
CONVERSION REACTIONS
DIAGRAM:
11
Q: What are the flowrates of the components?
Methane, oxygen, nitrogen, hydrogen, carbon dioxide, carbon monoxide
RESULT:
CHAPTER 9
12
CONVERSION REACTIONS
DIAGRAM:
RESULT:
Q: what is the molar flow of the following components?
13
CHAPTER 10
CSTR
DIAGRAM:
14
Q: What is the reactor temperature and Actual % conversion?
RESULT:
15
CHAPTER 11
16
ABSORBER
DIAGRAM:
RESULT:
17
Q: what is the section height(m), section diameter(m)and CO2
composition?
Further Study:
Q: change the solvent in flowrate from 2000 kg/hr. to 2500
kg/hr., run the simulation and check the section diameter(m),
section height(m) and CO2 composition?
18
RESULT:
19