This document contains G-code for engraving a design onto a material that is 250mm x 200mm x 3mm in size. It lists the toolpaths and tools used, which is an engraving tool with a 30 degree tip between 0.02-3mm. The G-code provides instructions for positioning and moving the engraving tool in the X, Y and Z axes to engraver the design at a depth of 0.110mm and speeds between 300-1320mm/min.
This document contains G-code for engraving a design onto a material that is 250mm x 200mm x 3mm in size. It lists the toolpaths and tools used, which is an engraving tool with a 30 degree tip between 0.02-3mm. The G-code provides instructions for positioning and moving the engraving tool in the X, Y and Z axes to engraver the design at a depth of 0.110mm and speeds between 300-1320mm/min.
This document contains G-code for engraving a design onto a material that is 250mm x 200mm x 3mm in size. It lists the toolpaths and tools used, which is an engraving tool with a 30 degree tip between 0.02-3mm. The G-code provides instructions for positioning and moving the engraving tool in the X, Y and Z axes to engraver the design at a depth of 0.110mm and speeds between 300-1320mm/min.