Professional Documents
Culture Documents
1 CIVIL WORKS
5.9.5
10 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams,
girders bressumers and cantilevers
GF beams sides (B1C1,B2C2,B4C4,B6C6) 8 3.08 0.38 9.363
GF beams sides (C1D1,C3D3,C6D6) 6 3.38 0.38 7.706
GF beams sides (D1E1,D3E3,D6E6) 6 3.41 0.38 7.775
GF beams sides (E1F1,E3F3,E5F5,E6F6) 8 3.97 0.38 12.069
GF beams sides (B1B6,C1C6) 4 9.46 0.38 14.379
GF beams sides (D1D6) 2 10.01 0.38 7.608
GF beams sides (E1E6) 2 9.71 0.38 7.380
GF beams sides (F1F6) 2 9.96 0.38 7.570
Cantilever beam 10 0.9 0.25 2.250
Cantilever end cap 5 0.25 0.25 0.313
pillar sides 4 1 0.38 1.520
pillar sides 6 0.8 0.38 1.824
pillar sides 2 0.7 0.38 0.532
pillar sides 1 0.4 0.38 0.152
pillar sides 1 0.45 0.38 0.171
pillar sides 1 0.5 0.38 0.190
pillar sides 4 0.6 0.38 0.912
Net Total Quantity 81.714
5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access
13
platform
office room
main bar 8mm 88 7.7 0.395 267.652
distributer 8mm 76 12.3 0.395 369.246
extra bar 8mm 24 1.9 0.395 18.012
extra bar 8mm 24 3.2 0.395 30.336
extra bar 8mm 20 2.8 0.395 22.120
extra bar 8mm 20 3 0.395 23.700
extra bar 8mm 20 1.9 0.395 15.010
lap 8mm 120 0.4 0.395 18.960
bathroom area
main bar 8mm 38 3.7 0.395 55.537
distributer 8mm 32 4.4 0.395 55.616
extra bar 8mm 14 1.2 0.395 6.636
extra bar 8mm 14 1.5 0.395 8.295
extra bar 8mm 18 1.8 0.395 12.798
store area
main bar 8mm 44 3.7 0.395 64.306
distributer 8mm 34 6 0.395 80.580
extra bar 8mm 16 1.5 0.395 9.480
extra bar 8mm 16 2.4 0.395 15.168
extra bar 8mm 28 1.4 0.395 15.484
porch area
main bar 8mm 40 3.8 0.395 60.040
distributer 8mm 28 4.6 0.395 50.876
extra bar 8mm 12 1.2 0.395 5.688
extra bar 8mm 12 2.2 0.395 10.428
extra bar 8mm 24 1.5 0.395 14.220
strong room
bottom bar 10mm 15 3.05 0.617 28.228
bottom bar 10mm 21 2 0.617 25.914
top bar 10mm 15 3.7 0.617 34.244
top bar 10mm 21 2.8 0.617 36.280
roof projection distributer 8mm 2 15.1 0.395 11.929
roof projection distributer 8mm 2 12.25 0.395 9.678
roof projection distributer 8mm 2 6.7 0.395 5.293
roof projection distributer 8mm 2 3.5 0.395 2.765
front projection 8mm 11 15.1 0.395 65.610
Total lap 8mm 160 0.4 0.395 25.280
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement
concrete for reinforced cement concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing
15 and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate,
retard setting of concrete, improve workability without impairing strength and durability as per direction of
Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less
cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor
V level
Beam B2( B1F1,B6F6) 2 14.84 0.2 0.380 2.256
Beam B2( B2C2,B4C4) 2 3.48 0.25 0.380 0.661
Beam B2( C3F3) 1 11.16 0.2 0.380 0.848
Beam B2( E5F5) 1 3.97 0.2 0.380 0.302
Beam B2( B1B2,C1C2) 2 3.8 0.2 0.380 0.578
Beam B2( B2B4,C2C4) 2 2 0.25 0.380 0.380
Beam B3( B4B6,C4C6) 2 4.66 0.2 0.380 0.708
Beam B4( D1D6) 1 10.86 0.25 0.380 1.032
Beam B3( E1E6) 1 10.66 0.2 0.380 0.810
Beam B2( F1F3) 1 5.46 0.2 0.380 0.415
Beam B2( F5F6) 1 2.8 0.2 0.380 0.213
CANTILEVER BEAM 5 0.9 0.25 0.250 0.281
STRONG ROOM EXTRA 1 2 3.08 0.080 0.493
PILLAR EXTRA 11 0.25 0.05 0.380 0.052
ROOF SLAB 1 15.15 12.31 0.120 22.380
stair deduction 1 -2.6 4.17 0.120 -1.301