Professional Documents
Culture Documents
Step 7: Click Sketch and Click Corner Rectangle/Center Rectangle and create a Rectangle
in Sketch and Click Smart Dimension and Click all Rectangle and put 2.00in in each side.
Lucky L. Lusterio CENCAD: Steps in Making a Square With 5 Holes Date: 11/28/2020
BSEE 1-A Prof: Mr. Jose Labayna
Step 8: Click Features and Click Extended Boss Base and enter 0.5in then enter then Click
Check Button.
Step: 9 Top Plane and Click Sketch and Create 4 circle at Four Edge. Click Smart
Dimension and Click the diameter of the Circle is 0.20in and distance of the edge is 0.30 in.
Lucky L. Lusterio CENCAD: Steps in Making a Square With 5 Holes Date: 11/28/2020
BSEE 1-A Prof: Mr. Jose Labayna
Step 10: Create another Circle at the diameter of 1.0in and Click Smart Dimension to
distance the edge and set to 1.0in.
Step 11: Click Features and Click Extruded Cut at the depth of 0.50in and Click Ok.
Lucky L. Lusterio CENCAD: Steps in Making a Square With 5 Holes Date: 11/28/2020
BSEE 1-A Prof: Mr. Jose Labayna
Step 12: Press Space Bar and Click Four View (Top. Front, Right Isometric)
Finished Product