Professional Documents
Culture Documents
STEP 3. On the bottom right change the units to IPS (inch, pound, second)
STEP 4. On the Upper left you can find the Top Plane and Click the Normal to
STEP 6. Create a Rectangle in Sketch and Click Smart Dimension and Click all side of Rectangle and put
2.00in in each sides.
STEP 7. Click Features and Click Extruded Boss/Base and enter 0.5in then
Enter or Click Check Button.
EULOGIO “AMANG” RODRIGUEZ INSTITUTE OF SCIENCE AND TECHNOLOGY
STEP 8. Click on Top Plain and Click Sketch and Click on the line that measures 0.30in and it will be your
guide for the next step.
STEP 9. Create 4 equal Circles at the edges that measures 0.20in and. Click the Smart Dimension and Click the
diameter of the circles and the guide line.
STEP 10. Create another Circle in the middle at the diameter 1.0in and Click Smart Dimensions to distance
thee edge and set to 1in.
EULOGIO “AMANG” RODRIGUEZ INSTITUTE OF SCIENCE AND TECHNOLOGY
STEP 11. Click Features and Click Extruded Cut at the depth of 0.50in and Click OK.
STEP 12. Click SpaceBar and Click Four View. ( Top, Front, Right, Isometric )
EULOGIO “AMANG” RODRIGUEZ INSTITUTE OF SCIENCE AND TECHNOLOGY
DONE.
EULOGIO “AMANG” RODRIGUEZ INSTITUTE OF SCIENCE AND TECHNOLOGY